Turn them into noop KILL instructions instead. This lets the scavenger know when
super-registers are killed and defined.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128645 91177308-0d34-0410-b5e6-96231b3b80d8
This way, shrinkToUses() will ignore the instruction that is about to be
deleted, and we avoid leaving invalid live ranges that SplitKit doesn't like.
Fix a misunderstanding in MachineVerifier about <def,undef> operands. The
<undef> flag is valid on def operands where it has the same meaning as <undef>
on a use operand. It only applies to sub-register defines which also read the
full register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128642 91177308-0d34-0410-b5e6-96231b3b80d8
The rematerialized instruction may require a more constrained register class
than the register being spilled. In the test case, the spilled register has been
inflated to the DPR register class, but we are rematerializing a load of the
ssub_0 sub-register which only exists for DPR_VFP2 registers.
The register class is reinflated after spilling, so the conservative choice is
only temporary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128610 91177308-0d34-0410-b5e6-96231b3b80d8
was lowering them to sext / uxt + mul instructions. Unfortunately the
optimization passes may hoist the extensions out of the loop and separate them.
When that happens, the long multiplication instructions can be broken into
several scalar instructions, causing significant performance issue.
Note the vmla and vmls intrinsics are not added back. Frontend will codegen them
as intrinsics vmull* + add / sub. Also note the isel optimizations for catching
mul + sext / zext are not changed either.
First part of rdar://8832507, rdar://9203134
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128502 91177308-0d34-0410-b5e6-96231b3b80d8
isel lowering to fold the zero-extend's and take advantage of no-stall
back to back vmul + vmla:
vmull q0, d4, d6
vmlal q0, d5, d6
is faster than
vaddl q0, d4, d5
vmovl q1, d6
vmul q0, q0, q1
This allows us to vmull + vmlal for:
f = vmull_u8( vget_high_u8(s), c);
f = vmlal_u8(f, vget_low_u8(s), c);
rdar://9197392
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128444 91177308-0d34-0410-b5e6-96231b3b80d8
becomes reachable when before it wasn't). Check to make sure that it's not null
before trying to use it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128434 91177308-0d34-0410-b5e6-96231b3b80d8
Correctly terminate the range of register DBG_VALUEs when the register is
clobbered or when the basic block ends.
The code is now ready to deal with variables that are sometimes in a register
and sometimes on the stack. We just need to teach emitDebugLoc to say 'stack
slot'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128327 91177308-0d34-0410-b5e6-96231b3b80d8
masks to match inversely for the code as is to work. For the example given
we actually want:
bfi r0, r2, #1, #1
not #0, however, given the way the pattern is written it's not possible
at the moment.
Fixes rdar://9177502
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128320 91177308-0d34-0410-b5e6-96231b3b80d8
The .dot directives don't need labels, that is a leftover from when we created
line number info manually.
Instructions following a DBG_VALUE can share its label since the DBG_VALUE
doesn't produce any code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128284 91177308-0d34-0410-b5e6-96231b3b80d8
I'm backing this out for the second time. It was supposed to be fixed by r128164, but the mingw self-host must be defeating the fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128181 91177308-0d34-0410-b5e6-96231b3b80d8
int tries = INT_MAX;
while (tries > 0) {
tries--;
}
The check should be:
subs r4, #1
cmp r4, #0
bgt LBB0_1
The subs can set the overflow V bit when r4 is INT_MAX+1 (which loop
canonicalization apparently does in this case). cmp #0 would have cleared
it while not changing the N and Z bits. Since BGT is dependent on the V
bit, i.e. (N == V) && !Z, it is not safe to eliminate the cmp #0.
rdar://9172742
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128179 91177308-0d34-0410-b5e6-96231b3b80d8
This will extend the ranges of debug info variables in registers until they are
clobbered.
Fix 1: Don't mistake DBG_VALUE instructions referring to incoming arguments on
the stack with DBG_VALUE instructions referring to variables in the frame
pointer. This fixes the gdb test-suite failure.
Fix 2: Don't trace through copies to physical registers setting up call
arguments. These registers are call clobbered, and the source register is more
likely to be a callee-saved register that can be extended through the call
instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128114 91177308-0d34-0410-b5e6-96231b3b80d8
Temporarily reverting these to see if we can get llvm-objdump to link. Hopefully this is not the problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128097 91177308-0d34-0410-b5e6-96231b3b80d8
These ranges get completely jumbled by the post-ra scheduler, and it is not
really reasonable to expect it to make sense of them.
Instead, teach DwarfDebug to notice when user variables in registers are
clobbered, and terminate the ranges there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128045 91177308-0d34-0410-b5e6-96231b3b80d8
gun as does. This makes it a lot easier to compare the output of both
as the addresses are now a lot closer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127972 91177308-0d34-0410-b5e6-96231b3b80d8
to have single return block (at least getting there) for optimizations. This
is general goodness but it would prevent some tailcall optimizations.
One specific case is code like this:
int f1(void);
int f2(void);
int f3(void);
int f4(void);
int f5(void);
int f6(void);
int foo(int x) {
switch(x) {
case 1: return f1();
case 2: return f2();
case 3: return f3();
case 4: return f4();
case 5: return f5();
case 6: return f6();
}
}
=>
LBB0_2: ## %sw.bb
callq _f1
popq %rbp
ret
LBB0_3: ## %sw.bb1
callq _f2
popq %rbp
ret
LBB0_4: ## %sw.bb3
callq _f3
popq %rbp
ret
This patch teaches codegenprep to duplicate returns when the return value
is a phi and where the phi operands are produced by tail calls followed by
an unconditional branch:
sw.bb7: ; preds = %entry
%call8 = tail call i32 @f5() nounwind
br label %return
sw.bb9: ; preds = %entry
%call10 = tail call i32 @f6() nounwind
br label %return
return:
%retval.0 = phi i32 [ %call10, %sw.bb9 ], [ %call8, %sw.bb7 ], ... [ 0, %entry ]
ret i32 %retval.0
This allows codegen to generate better code like this:
LBB0_2: ## %sw.bb
jmp _f1 ## TAILCALL
LBB0_3: ## %sw.bb1
jmp _f2 ## TAILCALL
LBB0_4: ## %sw.bb3
jmp _f3 ## TAILCALL
rdar://9147433
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127953 91177308-0d34-0410-b5e6-96231b3b80d8
not have native support for this operation (such as X86).
The legalized code uses two vector INT_TO_FP operations and is faster
than scalarizing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127951 91177308-0d34-0410-b5e6-96231b3b80d8
- Emit mad instead of mad.rn for shader model 1.0
- Emit explicit mov.u32 instructions for reading global variables
- (most PTX instructions cannot take global variable immediates)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127895 91177308-0d34-0410-b5e6-96231b3b80d8
comparisons on x86. Essentially, the way this works is that SUB+SBB sets
the relevant flags the same way a double-width CMP would.
This is a substantial improvement over the generic lowering in LLVM. The output
is also shorter than the gcc-generated output; I haven't done any detailed
benchmarking, though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127852 91177308-0d34-0410-b5e6-96231b3b80d8
