This was motivated by a bug which caused code like this to be
miscompiled:
declare void @take_ptr(i8*)
define void @test() {
%addr1.32 = alloca i8
%addr2.32 = alloca i32, i32 1028
call void @take_ptr(i8* %addr1)
ret void
}
This was emitting the following assembly to get the value of %addr1:
add r0, sp, #1020
add r0, r0, #8
However, "add r0, r0, #8" is not a valid Thumb1 instruction, and this
could not be assembled. The generated object file contained this,
resulting in r0 holding SP+8 rather tha SP+1028:
add r0, sp, #1020
add r0, sp, #8
This function looked like it could have caused miscompilations for
other combinations of registers and offsets (though I don't think it is
currently called with these), and the heuristic it used did not match
the emitted code in all cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222125 91177308-0d34-0410-b5e6-96231b3b80d8
We were a little lax in a few areas:
- We pretended that import libraries were like any old COFF file, they
are not. In fact, they aren't really COFF files at all, we should
probably grow some specialized functionality to handle them smarter.
- Our symbol iterators were more than happy to attempt to go past the
end of the symbol table if you had a symbol with a bad list of
auxiliary symbols.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222124 91177308-0d34-0410-b5e6-96231b3b80d8
Some optimisations in DAGCombiner cause miscompilations for targets that use
TargetLowering::UndefinedBooleanContent, because they assume that the results
of a SELECT_CC node are boolean values, and can be safely ANDed, ORed and
XORed. These optimisations are only valid for targets that use
ZeroOrOneBooleanContent or ZeroOrNegativeOneBooleanContent.
This is a follow-up to D6210/r221693.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222123 91177308-0d34-0410-b5e6-96231b3b80d8
This is a simple optimization for switch table lookup:
It computes the output value directly with an (optional) mul and add if there is a linear mapping between index and output.
Example:
int f1(int x) {
switch (x) {
case 0: return 10;
case 1: return 11;
case 2: return 12;
case 3: return 13;
}
return 0;
}
generates:
define i32 @f1(i32 %x) #0 {
entry:
%0 = icmp ult i32 %x, 4
br i1 %0, label %switch.lookup, label %return
switch.lookup:
%switch.offset = add i32 %x, 10
ret i32 %switch.offset
return:
ret i32 0
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222121 91177308-0d34-0410-b5e6-96231b3b80d8
This adds back r222061, but now calls initializePAEvalPass from the correct
library to avoid link problems.
Original message:
Don't make assumptions about the name of private global variables.
Private variables are can be renamed, so it is not reliable to make
decisions on the name.
The name is also dropped by the assembler before getting to the
linker, so using the name causes a disconnect between how llvm makes a
decision (var name) and how the linker makes a decision (section it is
in).
This patch changes one case where we were looking at the variable name to use
the section instead.
Test tuning by Michael Gottesman.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222117 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Several places in DependenceAnalysis assumes both SCEVs in a subscript pair
share the same integer type. For instance, isKnownPredicate calls
SE->getMinusSCEV(X, Y) which asserts X and Y share the same type. However,
DependenceAnalysis fails to ensure this assumption when producing a subscript
pair, causing tests such as NonCanonicalizedSubscript to crash. With this
patch, DependenceAnalysis runs unifySubscriptType before producing any
subscript pair, ensuring the assumption.
Test Plan:
Added NonCanonicalizedSubscript.ll on which DependenceAnalysis before the fix
crashed because subscripts have different types.
Reviewers: spop, sebpop, jingyue
Reviewed By: jingyue
Subscribers: eliben, meheff, llvm-commits
Differential Revision: http://reviews.llvm.org/D6289
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222100 91177308-0d34-0410-b5e6-96231b3b80d8
HowFarToZero was supposed to use unsigned division in order to calculate
the backedge taken count. However, SCEVDivision::divide performs signed
division. Unless I am mistaken, no users of SCEVDivision actually want
signed arithmetic: switch to udiv and urem.
This fixes PR21578.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222093 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches the DAGCombiner how to combine shuffles according to rules:
shuffle(shuffle(A, Undef, M0), B, M1) -> shuffle(B, A, M2)
shuffle(shuffle(A, B, M0), B, M1) -> shuffle(B, A, M2)
shuffle(shuffle(A, B, M0), A, M1) -> shuffle(B, A, M2)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222090 91177308-0d34-0410-b5e6-96231b3b80d8
Updated X86TargetLowering::isShuffleMaskLegal to match SHUFP masks with commuted inputs and PSHUFD masks that reference the second input.
As part of this I've refactored isPSHUFDMask to work in a more general manner and allow it to match against either the first or second input vector.
Differential Revision: http://reviews.llvm.org/D6287
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222087 91177308-0d34-0410-b5e6-96231b3b80d8
This gets the correct NaN behavior based on the compare type
the hardware uses. This now passes the new piglit test I have
for this on SI.
Add stricter tests for the operand order.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222079 91177308-0d34-0410-b5e6-96231b3b80d8
Private variables are can be renamed, so it is not reliable to make
decisions on the name.
The name is also dropped by the assembler before getting to the
linker, so using the name causes a disconnect between how llvm makes a
decision (var name) and how the linker makes a decision (section it is
in).
This patch changes one case where we were looking at the variable name to use
the section instead.
Test tuning by Michael Gottesman.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222061 91177308-0d34-0410-b5e6-96231b3b80d8
We use to track quite a few "adjusted" offsets through the FrameLowering code
to account for changes in the prologue instructions as we went and allow the
emission of correct CFA annotations. However, we were missing a couple of cases
and the code was almost impenetrable.
It's easier to just add any stack-adjusting instruction to a list and emit them
together.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222057 91177308-0d34-0410-b5e6-96231b3b80d8
When we folded the DPR alignment gap into a push, we weren't noting the extra
distance from the beginning of the push to the FP, and so FP ended up pointing
at an incorrect offset.
The .cfi_def_cfa_offset directives are still wrong in this case, but I think
that can be improved by refactoring.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222056 91177308-0d34-0410-b5e6-96231b3b80d8
The test's DWARF stubs were there just to trigger the emission of .cfi
directives. Fortunately, the NetBSD ABI already demands proper DWARF unwind
info, so it's easier to just use that triple.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222055 91177308-0d34-0410-b5e6-96231b3b80d8
FYI, removed the unused MCInstrAnalysis as it does not exist for 64-bit ARM and
was causing a “couldn't initialize disassembler for target” error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222045 91177308-0d34-0410-b5e6-96231b3b80d8
We would attempt to replace a fptrunc of an frem with an identical
fptrunc. This would cause the new fptrunc to be added to the worklist.
Of course, this results in an infinite loop because we will keep
visiting the newly created fptruncs.
This fixes PR21576.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222040 91177308-0d34-0410-b5e6-96231b3b80d8
doing Load PRE"
This commit updates the failing test in
Analysis/TypeBasedAliasAnalysis/gvn-nonlocal-type-mismatch.ll
The failing test is sensitive to the order in which we process loads. This
version turns on the RPO traversal instead of the while DT traversal in GVN.
The new test code is functionally same just the order of loads that are
eliminated is swapped.
This new version also fixes an issue where GVN splits a critical edge and
potentially invalidate the RPO/DT iterator.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222039 91177308-0d34-0410-b5e6-96231b3b80d8
If we have spilled the value of the m0 register, then we need to restore
it with v_readlane_b32 to a regular sgpr, because v_readlane_b32 can't
write to m0.
v_readlane_b32 can't write to m0, so
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222036 91177308-0d34-0410-b5e6-96231b3b80d8
ELF targets (and maybe COFF) use relocations when referring
to strings in the .debug_str section. Handle that in the
accelerator table dumper. This commit restores the
test/DebugInfo/cross-cu-inlining.ll test to its expected
platform independant form, validating that the fix works
(this test failed on linux boxes).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222029 91177308-0d34-0410-b5e6-96231b3b80d8
If this workaround gets the bots green, then we have to find out
why the -dwarf-accel-tables=Enable option doesn't work as
expected on non-darwin platforms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222007 91177308-0d34-0410-b5e6-96231b3b80d8
Prior to this commit fmul and fadd binary operators were being canonicalized for
both scalar and vector versions. We now canonicalize add, mul, and, or, and xor
vector instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222006 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r221842 which was a revert of r221836 and of the
test parts of r221837.
This new version fixes an UB bug pointed out by David (along with
addressing some other review comments), makes some dumping more
resilient to broken input data and forces the accelerator tables
to be dumped in the tests where we use them (this decision is
platform specific otherwise).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222003 91177308-0d34-0410-b5e6-96231b3b80d8
This was done using the Sparc and PowerPC AsmParsers as guides. So far it
is very simple and only supports sopp instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221994 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds builtin support for xvdivdp and xvdivsp, along with a
test case. Straightforward stuff.
There's a companion patch for Clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221983 91177308-0d34-0410-b5e6-96231b3b80d8
getTargetConstant should only be used when you can guarantee the instruction
selected will be able to cope with the raw value. BUILD_VECTOR is rather too
generic for this so we should use getConstant instead. In that case, an
instruction can still consume the constant, but if it doesn't it'll be
materialised through its own round of ISel.
Should fix PR21352.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221961 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This has most of what is needed for mips fast-isel call lowering for O32.
What is missing I will add on the next patch because this patch is already too large.
It should not be doing anything wrong but it will punt on some cases that it is basically
capable of doing.
The mechanism is there for parameters to be passed on the stack but I have not enabled it because it serves as a way for now to prevent some of the strange cases of O32 register passing that I have not fully checked yet and have some issues.
The Mips O32 abi rules are very complicated as far how data is passed in floating and integer registers.
However there is a way to think about this all very simply and this implementation reflects that.
Basically, the ABI rules are written as if everything is passed on the stack and aligned as such.
Once that is conceptually done, it is nearly trivial to reassign those locations to registers and
then all the complexity disappears.
So I have told tablegen that all the data is passed on the stack and during the lowering I fix
this by assigning to registers as per the ABI doc.
This has been my approach and you can line up what I did with the ABI document and see 1 to 1 what
is going on.
Test Plan: callabi.ll
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: jholewinski, echristo, ahatanak, llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D5714
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221948 91177308-0d34-0410-b5e6-96231b3b80d8
Fix for LLI failure on Windows\X86: http://llvm.org/PR5053
LLI.exe crashes on Windows\X86 when single precession floating point
intrinsics like the following are used: acos, asin, atan, atan2, ceil,
copysign, cos, cosh, exp, floor, fmin, fmax, fmod, log, pow, sin, sinh,
sqrt, tan, tanh
The above intrinsics are defined as inline-expansions in math.h, and are
not exported by msvcr120.dll (Win32 API GetProcAddress returns null).
For an FREM instruction, the JIT compiler generates a call to a stub for
the fmodf() intrinsic, and adds a relocation to fixup at load time. The
loader searches the libraries for the function, but fails because the
symbol is not exported. So, the call target remains NULL and the
execution crashes.
Since the math functions are loaded at JIT/runtime, the JIT can patch
CALL instruction directly instead of the searching the libraries'
exported symbols. However, this fix caused build failures due to
unresolved symbols like _fmodf at link time.
Therefore, the current fix defines helper functions in the Runtime
link/load library to perform the above operations. The address of these
helper functions are used to patch up the CALL instruction at load time.
Reviewers: lhames, rnk
Reviewed By: rnk
Differential Revision: http://reviews.llvm.org/D5387
Patch by Swaroop Sridhar!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221947 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r221924. It appears the commit was a bit premature and is causing
bot failures that need further investigation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221939 91177308-0d34-0410-b5e6-96231b3b80d8
in-lane shuffles that aren't always handled well by the current vector
shuffle lowering.
No functionality change yet, that will follow in a subsequent commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221938 91177308-0d34-0410-b5e6-96231b3b80d8
The generic FastISel code would bail, because it can't emit a sign-extend for
AArch64. This copies the code over and uses AArch64 specific emit functions.
This is not ideal and 'computeAddress' should handles this, so it can fold the
address computation into the memory operation.
I plan to clean up 'computeAddress' anyways, so I will add that in a future
commit.
Related to rdar://problem/18962471.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221923 91177308-0d34-0410-b5e6-96231b3b80d8
If a function is just an unreachable, this would hit a
"this is not a MachO target" assertion because of setting
HasSubsectionViaSymbols.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221920 91177308-0d34-0410-b5e6-96231b3b80d8