I've been sitting on this long enough trying to find a test case. I
think the fix should go in now, but I'll keep working on the test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132701 91177308-0d34-0410-b5e6-96231b3b80d8
When local live range splitting creates a live range with the same
number of instructions as the old range, mark it as RS_Local. When such
a range is seen again, require that it be split in a way that reduces
the number of instructions. That guarantees we are making progress while
still being able to perform 3 -> 2+3 splits as required by PR10070.
This also means that the PrevSlot map is no longer needed. This was also
used to estimate new spill weights, but that is no longer necessary
after slotIndexes::insertMachineInstrInMaps() got the extra Late
insertion argument.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132697 91177308-0d34-0410-b5e6-96231b3b80d8
Only target-dependent hints require callbacks. The RCI allocation order
has CSR aliases last according to their order of appearance in the
getCalleeSavedRegs list. This can depend on the calling convention.
This way, AllocationOrder::next doesn't have to check for reserved
registers, and CSRs are always allocated last, even with weird calling
conventions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132690 91177308-0d34-0410-b5e6-96231b3b80d8
The order of registers returned by getCalleeSavedRegs is used to lay out
the fixed stack slots for CSRs. Some targets like their CSRs used from
one end, and some targets want them used from the other end.
When computing an allocation order, simply preserve the relative
ordering of CSRs that the target specifies in its allocation order.
Reordering CSRs would break some targets, ARM in particular.
We still place volatiles before the CSRs, providing slightly better
results with different calling conventions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132680 91177308-0d34-0410-b5e6-96231b3b80d8
(only happens when using the -promote-elements option).
The correct legalization order is to first try to promote element. Next, we try
to widen vectors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132648 91177308-0d34-0410-b5e6-96231b3b80d8
of reserved registers.
Use RegisterClassInfo in RABasic as well. This slightly changes som
allocation orders because RegisterClassInfo puts CSR aliases last.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132581 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, these aliases would be ordered alphabetically. (BH, BL)
Print out the computed allocation orders.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132580 91177308-0d34-0410-b5e6-96231b3b80d8
When compiling a program with lots of small functions like
483.xalancbmk, this makes RAFast 11% faster.
Add some comments to clarify the difference between unallocatable and
reserved registers. It's quite subtle.
The fast register allocator depends on EFLAGS' not being allocatable on
x86. That way it can completely avoid tracking liveness, and it won't
mind when there are multiple uses of a single def.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132514 91177308-0d34-0410-b5e6-96231b3b80d8
Some register classes are only used for instruction operand constraints.
They should never be used for virtual registers. Previously, those
register classes were given an empty allocation order, but now you can
say 'let isAllocatable=0' in the register class definition.
TableGen calculates if a register is part of any allocatable register
class, and makes that information available in TargetRegisterDesc::inAllocatableClass.
The goal here is to eliminate use cases for overriding allocation_order_*
methods.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132508 91177308-0d34-0410-b5e6-96231b3b80d8
I was confused whether new uint8_t[] would zero-initialize the returned
array, and it seems that so is gcc-4.0.
This should fix the test failures on darwin 9.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132500 91177308-0d34-0410-b5e6-96231b3b80d8
Instead, use simpler approach and let DBG_VALUE follow its predecessor instruction. After live debug value analysis pass, all DBG_VALUE instruction are placed at the right place. Thanks Jakob for the hint!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132483 91177308-0d34-0410-b5e6-96231b3b80d8
register classes.
It provides information for each register class that cannot be
determined statically, like:
- The number of allocatable registers in a class after filtering out the
reserved and invalid registers.
- The preferred allocation order with registers that overlap callee-saved
registers last.
- The last callee-saved register that overlaps a given physical register.
This information usually doesn't change between functions, so it is
reused for compiling multiple functions when possible. The many
possible combinations of reserved and callee saves registers makes it
unfeasible to compute this information statically in TableGen.
Use RegisterClassInfo to count available registers in various heuristics
in SimpleRegisterCoalescing, making the pass run 4% faster.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132450 91177308-0d34-0410-b5e6-96231b3b80d8
patch we add a flag to enable a new type legalization decision - to promote
integer elements in vectors. Currently, the rest of the codegen does not support
this kind of legalization. This flag will be removed when the transition is
complete.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132394 91177308-0d34-0410-b5e6-96231b3b80d8
For targets with no itinerary (x86) it is a nop by default. For
targets with issue width already expressed in the itinerary (ARM) it
bypasses a scoreboard check but otherwise does not affect the
schedule. It does make the code more consistent and complete and
allows new targets to specify their issue width in an arbitrary way.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132385 91177308-0d34-0410-b5e6-96231b3b80d8
turns out that it could cause an infinite loop in some situations. If this code
is triggered and it converts a cleanup into a catchall, but that cleanup was in
already in a cleanup, then the _Unwind_SjLj_Resume could infinite loop. I.e.,
the code doesn't consume the exception object and passes it on to
_Unwind_SjLj_Resume. But _USjLjR expects it to be consumed (since it's landing
at a catchall instead of a cleanup). So it uses the values that are presently
there, which are the values that tell it to jump to the fake landing pad.
<rdar://problem/9508402>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132381 91177308-0d34-0410-b5e6-96231b3b80d8
When assigned ranges are evicted, they are put in the RS_Evicted stage and are
not allowed to evict anything else. That prevents looping automatically.
When evicting ranges just to get a cheaper register, use only spill weights to
find the possible candidates. Avoid breaking hints for this purpose, it is not
worth it.
Start implementing more complex eviction heuristics, guarded by the temporary
-complex-eviction flag. The initial version permits a heavier range to be
evicted if it doesn't have any uses where the evicting range is live. This makes
it a good candidate for live ranfge splitting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132358 91177308-0d34-0410-b5e6-96231b3b80d8
handler's data area starts with a 4-byte reference to the personality
function, followed by the DWARF LSDA.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132302 91177308-0d34-0410-b5e6-96231b3b80d8
This only affects targets like Mips where branch instructions may kill virtual
registers. Most other targets branch on flag values, so virtual registers are
not involved.
The problem is that MachineBasicBlock::updateTerminator deletes branches and
inserts new ones while LiveVariables keeps a list of pointers to instructions
that kill virtual registers. That list wasn't properly updated in
MBB::SplitCriticalEdge.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132298 91177308-0d34-0410-b5e6-96231b3b80d8
handler.
At this moment, only GCC-style exceptions are supported. Other kinds
of exceptions, including "traditional" SEH and Microsoft Visual C++ exceptions,
need more work--and an compiler exception model that isn't specific to
GCC-style exceptions!
In particular, I imagine that it would be possible to mix "traditional" SEH
with GCC-style EH or Microsoft C++ EH. Currently LLVM has no way (beyond some
target-specific defaults and whole-module compiler switches) of knowing which
scheme to use when.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132283 91177308-0d34-0410-b5e6-96231b3b80d8
This patch does not change the behavior of the type legalizer. The codegen
produces the same code.
This infrastructural change is needed in order to enable complex decisions
for vector types (needed by the vector-select patch).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132263 91177308-0d34-0410-b5e6-96231b3b80d8
transformed by the inliner into a branch to the enclosing landing pad
(when inlined through an invoke). If not so optimized, it is lowered
DWARF EH preparation into a call to _Unwind_Resume (or _Unwind_SjLj_Resume
as appropriate). Its chief advantage is that it takes both the
exception value and the selector value as arguments, meaning that there
is zero effort in recovering these; however, the frontend is required
to pass these down, which is not actually particularly difficult.
Also document the behavior of landing pads a bit better, and make it
clearer that it's okay that personality functions don't always land at
landing pads. This is just a fact of life. Don't write optimizations that
rely on pushing things over an unwind edge.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132253 91177308-0d34-0410-b5e6-96231b3b80d8
