to generically lower blends and is particularly nice because it is
available frome SSE2 onward. This removes a lot of the remaining domain
crossing blends in SSE2 code.
I'm hoping to replace some of the "interleaved" lowering hacks with
something closer to this which should be more principled. First, this
needs to learn how to detect and use other interleavings besides that of
the natural type provided. That will be a follow-up patch though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229378 91177308-0d34-0410-b5e6-96231b3b80d8
For #pragma comment(linker, ...) MSVC expects the comment string to be quoted, but for #pragma comment(lib, ...) the compiler itself quotes the library name.
Since this distinction disappears by the time the directive reaches the backend, move quoting for the "lib" version to the frontend.
Differential Revision: http://reviews.llvm.org/D7652
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229375 91177308-0d34-0410-b5e6-96231b3b80d8
This blend instruction is ... really lame. The register usage is insane.
As a consequence this is probably only *barely* better than 2 pshufbs
followed by a por, and that mostly because it only has to read from
a single memory location.
However, this doesn't fix as much as I kind of expected, so more to go.
Pretty sure that the ordering and delegation of v16i8 is just really,
really bad.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229373 91177308-0d34-0410-b5e6-96231b3b80d8
We didn't properly handle the out-of-bounds case for
ConstantAggregateZero and UndefValue. This would manifest as a crash
when the constant folder was asked to fold a load of a constant global
whose struct type has no operands.
This fixes PR22595.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229352 91177308-0d34-0410-b5e6-96231b3b80d8
advantage of the existence of a reasonable blend instruction.
The 256-bit vector shuffle lowering has leveraged the general technique
of decomposed shuffles and blends for quite some time, but this never
made it back into the 128-bit code, and there are a large number of
patterns where this is substantially better. For example, this removes
almost all domain crossing in vector shuffles that involve some blend
and some permutation with SSE4.1 and later. See the massive reduction
in 'shufps' for integer test cases in this commit.
This isn't perfect yet for a few reasons:
1) The v8i16 shuffle lowering continues to plague me. We don't always
form an unpack-based blend when that would be better. But the wins
pretty drastically outstrip the losses here.
2) The v16i8 shuffle lowering is just a disaster here. I never went and
implemented blend support here for some terrible reason. I'll do
that next probably. I've not updated it for now.
More variations on this technique are coming as well -- we don't
shuffle-into-unpack or shuffle-into-palignr, both of which would also be
profitable.
Note that some test cases grow significantly in the number of
instructions, but I expect to actually be faster. We use
pshufd+pshufd+blendw instead of a single shufps, but the pshufd's are
very likely to pipeline well (two ports on most modern intel chips) and
the blend is a *very* fast instruction. The domain switch penalty will
essentially always be more than a blend instruction, which is the only
increase in tree height.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229350 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When creating {insert,extract}value instructions from a BitcodeReader, we
weren't verifying the fields were valid.
Bugs found with afl-fuzz
Reviewers: rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7325
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229345 91177308-0d34-0410-b5e6-96231b3b80d8
This patch refactors the existing lowerVectorShuffleAsByteShift function to add support for 256-bit vectors on AVX2 targets.
It also fixes a tablegen issue that prevented the lowering of vpslldq/vpsrldq vec256 instructions.
Differential Revision: http://reviews.llvm.org/D7596
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229311 91177308-0d34-0410-b5e6-96231b3b80d8
when that will allow it to lower with a single permute instead of
multiple permutes.
It tries to detect when it will only have to do a single permute in
either case to maximize folding of loads and such.
This cuts a *lot* of the avx2 shuffle permute counts in half. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229309 91177308-0d34-0410-b5e6-96231b3b80d8
directly into blends of the splats.
These patterns show up even very late in the vector shuffle lowering
where we don't have any chance for DAG combining to kick in, and
blending is a tremendously simpler operation to model. By coercing the
shuffle into a blend we can much more easily match and lower shuffles of
splats.
Immediately with this change there are significantly more blends being
matched in the x86 vector shuffle lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229308 91177308-0d34-0410-b5e6-96231b3b80d8
I was somewhat surprised this pattern really came up, but it does. It
seems better to just directly handle it than try to special case every
place where we end up forming a shuffle that devolves to a shuffle of
a zero vector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229301 91177308-0d34-0410-b5e6-96231b3b80d8
subvectors from buildvectors. That doesn't really make any sense and it
breaks all of the down-stream matching of buildvectors to cleverly lower
shuffles.
With this, we now get the shift-based lowering of 256-bit vector
shuffles with AVX1 when we split them into 128-bit vectors. We also do
much better on the zero-extension patterns, although there remains quite
a bit of room for improvement here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229299 91177308-0d34-0410-b5e6-96231b3b80d8
GNU ld sets default, not hidden, visibility on local symbols.
Having default or hidden visibility on local symbols makes no difference in run-time behavior.
Patch by: H.J. Lu <hjl.tools@gmail.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229297 91177308-0d34-0410-b5e6-96231b3b80d8
lowerings -- one which decomposes into an initial blend followed by
a permute.
Particularly on newer chips, blends are handled independently of
shuffles and so this is much less bottlenecked on the single port that
floating point shuffles are executed with on Intel.
I'll be adding this lowering to a bunch of other code paths in
subsequent commits to handle still more places where we can effectively
leverage blends when they're available in the ISA.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229292 91177308-0d34-0410-b5e6-96231b3b80d8
by r229285. This is a nice different test case though, so I'd like to
have the extra testing of these kinds of patterns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229286 91177308-0d34-0410-b5e6-96231b3b80d8
test.
This was just a matter of the DAG combine for vector shuffles being too
aggressive. This is a bit of a grey area, but I think generally if we
can re-use intermediate shuffles, we should. Certainly, given the test
cases I have available, this seems like the right call.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229285 91177308-0d34-0410-b5e6-96231b3b80d8
legality test (essentially, everything is legal).
I'm planning to make this the default shortly, but I'd like to fix
a collection of the bugs it exposes first, and this will let me easily
test them. It also showcases both the improvements and a few of the
regressions triggered by the change. The biggest improvements by far are
the significantly reduced shuffling and domain crossing in the combining
test case. The biggest regressions are missing some clever blending
patterns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229284 91177308-0d34-0410-b5e6-96231b3b80d8
asm and port the mmx vector shuffle test to it.
Not thrilled with how it handles the stack manipulation logic, but I'm
much less bothered by that than I am by updating the test manually. =]
If anyone wants to teach the test checks management script about stack
adjustment patterns, that'd be cool too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229268 91177308-0d34-0410-b5e6-96231b3b80d8
Patch to allow XOP instructions (integer comparison and integer multiply-add) to be commuted. The comparison instructions sometimes require the compare mode to be flipped but the remaining instructions can use default commutation modes.
This patch also sets the SSE domains of all the XOP instructions.
Differential Revision: http://reviews.llvm.org/D7646
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229267 91177308-0d34-0410-b5e6-96231b3b80d8
The "dereferenceable" attribute cannot be added via .addAttribute(),
since it also expects a size in bytes. AttrBuilder#addAttribute or
AttributeSet#addAttribute is wrapped by classes Function, InvokeInst,
and CallInst. Add corresponding wrappers to
AttrBuilder#addDereferenceableAttr.
Having done this, propagate the dereferenceable attribute via
gc.relocate, adding a test to exercise it. Note that -datalayout is
required during execution over and above -instcombine, because
InstCombine only optionally requires DataLayoutPass.
Differential Revision: http://reviews.llvm.org/D7510
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229265 91177308-0d34-0410-b5e6-96231b3b80d8
Added test CodeGen/X86/constant-hoisting-optnone.ll to verify that
pass Constant Hoisting is not run on optnone functions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229258 91177308-0d34-0410-b5e6-96231b3b80d8
a gold binary explicitly. Substitute this binary into the tests rather
than just directly executing the 'ld' binary.
This should allow folks to inject a cross compiling gold binary, or in
my case to use a gold binary built and installed somewhere other than
/usr/bin/ld. It should also allow the tests to find 'ld.gold' so that
things work even if gold isn't the default on the system.
I've only stubbed out support in the makefile to preserve the existing
behavior with none of the fancy logic. If someone else wants to add
logic here, they're welcome to do so.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229251 91177308-0d34-0410-b5e6-96231b3b80d8
interpreter. Seems that's a better path than pinning to python2.7.
Thanks to Justin for prodding me toward a fix. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229247 91177308-0d34-0410-b5e6-96231b3b80d8
This should allow finally fixing the f64 fdiv implementation.
Test is disabled for VI since there seems to be a problem with one
of the buffer load instructions on it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229236 91177308-0d34-0410-b5e6-96231b3b80d8
This code didn't really make sense as is. If a filename is passed in,
the user obviously wants the coverage *for that file*, not *for
everything*.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229217 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r228939.
The commit broke something in the output of exception handling tables on
darwin x86-64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229203 91177308-0d34-0410-b5e6-96231b3b80d8
If we know that the sign bit of a value being sign extended is zero, we can use a zero extension instead. This is motivated by the fact that zero extensions are generally cheaper on x86 (and most other architectures?). We already apply a similar transform in DAGCombine, this just extends that to the IR level.
This comes up when we eagerly canonicalize gep indices to the width of a machine register (i64 on x86_64). To do so, we insert sign extensions (sext) to promote smaller types.
Differential Revision: http://reviews.llvm.org/D7255
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229189 91177308-0d34-0410-b5e6-96231b3b80d8
With this commit, llvm-dsymutil learns how to choose which DIEs
it will link in the final output and which ones it won't. This
is based on the 'valid relocation' information that has been
built in the previous commits.
The test only tests that we choose the right 'root DIEs'. The
selection algorithm (and especially the part that walk the
dependencies of a root DIE) lacks a bit test coverage. This
will be much easier to cover when we output actual Dwarf and
thus can use llvm-dwarfdump to verify the structure of the
emitted DIE trees. I'll add more tests then.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229183 91177308-0d34-0410-b5e6-96231b3b80d8
This takes the preposterous number of patterns in this section
that were last added to in r219033 down to just plain obnoxious.
With a little more work, we might get this down to just comical.
I've added more test cases to the existing file that checks these
patterns, but it seems that some of these patterns simply don't
exist with today's shuffle lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229158 91177308-0d34-0410-b5e6-96231b3b80d8
llc would hang trying to write output to a full pipe that FileCheck
wasn't reading. FileCheck wasn't reading from stdin because it needs a
file as a positional argument.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229157 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds functionality in MIPS delay slot filler such as if delay slot
filler have to put NOP instruction into the delay slot of microMIPS JR
instruction, then instead of emitting NOP this instruction is replaced by
compact jump instruction JRC.
Differential Revision: http://reviews.llvm.org/D7522
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229128 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes a problem I accidentally introduced in an instruction combine
on select instructions added at r227197. That revision taught the instruction
combiner how to fold a cttz/ctlz followed by a icmp plus select into a single
cttz/ctlz with flag 'is_zero_undef' cleared.
However, the new rule added at r227197 would have produced wrong results in the
case where a cttz/ctlz with flag 'is_zero_undef' cleared was follwed by a
zero-extend or truncate. In that case, the folded instruction would have
been inserted in a wrong location thus leaving the CFG in an inconsistent
state.
This patch fixes the problem and add two reproducible test cases to
existing test 'InstCombine/select-cmp-cttz-ctlz.ll'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229124 91177308-0d34-0410-b5e6-96231b3b80d8
SimplifyCFG now knows how to speculate calls to intrinsic cttz/ctlz that are
'cheap' for the target. Therefore, some of the logic in CodeGenPrepare
that was originally added at revision 224899 can now be removed.
This patch is basically a no functional change. It removes the duplicated
logic in CodeGenPrepare and converts all the existing target specific tests
for cttz/ctlz into SimplifyCFG tests.
Differential Revision: http://reviews.llvm.org/D7608
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229105 91177308-0d34-0410-b5e6-96231b3b80d8
Up the phi node folding threshold from a cheap "1" to a meagre "2".
Update tests for extra added selects and slight code churn.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229099 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Made the following changes:
Added calls to emitDirectiveSetNoAt() and emitDirectiveSetAt().
Added special emit function for .set at=$reg, emitDirectiveSetAtWithArg(unsigned RegNo).
Improved parsing error checks for .set at.
Refactored parser code for .set at.
Improved testing of both directives.
Improved code readability and comments.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7176
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229097 91177308-0d34-0410-b5e6-96231b3b80d8
regressions for LLDB on Linux. Rafael indicated on lldb-dev that we
should just go ahead and revert these but that he wasn't at a computer.
The patches backed out are as follows:
r228980: Add support for having multiple sections with the name and ...
r228889: Invert the section relocation map.
r228888: Use the existing SymbolTableIndex intsead of doing a lookup.
r228886: Create the Section -> Rel Section map when it is first needed.
These patches look pretty nice to me, so hoping its not too hard to get
them re-instated. =D
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229080 91177308-0d34-0410-b5e6-96231b3b80d8
The issues with the new unroll analyzer are more fundamental than code
cleanup, algorithm, or data structure changes. I've sent an email to the
original commit thread with details and a proposal for how to redesign
things. I'm disabling this for now so that we don't spend time
debugging issues with it in its current state.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229064 91177308-0d34-0410-b5e6-96231b3b80d8
- First, there's a crash when we try to combine that pointers into `icmp`
directly by creating a `bitcast`, which is invalid if that two pointers are
from different address spaces.
- It's not always appropriate to cast one pointer to another if they are from
different address spaces as that is not no-op cast. Instead, we only combine
`icmp` from `ptrtoint` if that two pointers are of the same address space.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229063 91177308-0d34-0410-b5e6-96231b3b80d8
propagating of metadata.
We were propagating !nonnull metadata even when the newly formed load is
no longer of a pointer type. This is clearly broken and results in LLVM
failing the verifier and aborting. This patch just restricts the
propagation of !nonnull metadata to when we actually have a pointer
type.
This bug report and the initial version of this patch was provided by
Charles Davis! Many thanks for finding this!
We still need to add logic to round-trip the metadata correctly if we
combine from pointer types to integer types and then back by using range
metadata for the integer type loads. But this is the minimal and safe
version of the patch, which is important so we can backport it into 3.6.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229029 91177308-0d34-0410-b5e6-96231b3b80d8
This commit makes the following changes:
- Stop issuing a warning when the triples' string representations do not match
exactly if the Triple objects generated from the strings compare equal.
- On Apple platforms, choose the triple that has the larger minimum version
number.
rdar://problem/16743513
Differential Revision: http://reviews.llvm.org/D7591
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228999 91177308-0d34-0410-b5e6-96231b3b80d8
Using this in combination with -ffunction-sections allows LLVM to output a .o
file with mulitple sections named .text. This saves space by avoiding long
unique names of the form .text.<C++ mangled name>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228980 91177308-0d34-0410-b5e6-96231b3b80d8
Constant pool entries are uniqued by their contents regardless of their
type. This means that a pshufb can have a shuffle mask which isn't a
simple array of bytes.
The code path which attempts to decode the mask didn't check for
failure, causing PR22559.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228979 91177308-0d34-0410-b5e6-96231b3b80d8
I'd modify my migration tool to account for this, but this is the only
instance of a typedef'd pointer type to a gep I found in the whole test
suite, so it didn't seem worthwhile.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228970 91177308-0d34-0410-b5e6-96231b3b80d8
The PowerPC backend has long promoted some floating-point vector operations
(such as select) to integer vector operations. Unfortunately, this behavior was
broken by r216555. When using FP_EXTEND/FP_ROUND for promotions, we must check
that both the old and new types are floating-point types. Otherwise, we must
use BITCAST as we did prior to r216555 for everything.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228969 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Implement the bulk of returning values in Mips fast-isel
Test Plan:
reatabi.ll
Passes test-suite at -O0,-O2 and with mips32r2 and mips32r1.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits, aemerson, rfuhler
Differential Revision: http://reviews.llvm.org/D5920
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228958 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Instances of the AssumptionCache are per function, so we can't re-use
the same AssumptionCache instance when recursing in the CallAnalyzer to
analyze a different function. Instead we have to pass the
AssumptionCacheTracker to the CallAnalyzer so it can get the right
AssumptionCache on demand.
Reviewers: hfinkel
Subscribers: llvm-commits, hans
Differential Revision: http://reviews.llvm.org/D7533
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228957 91177308-0d34-0410-b5e6-96231b3b80d8
We can't solve the full subgraph isomorphism problem. But we can
allow obvious cases, where for example two instructions of different
types are out of order. Due to them having different types/opcodes,
there is no ambiguity.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228931 91177308-0d34-0410-b5e6-96231b3b80d8
Now that SimplifyCFG uses TTI for the cost heuristic, we can teach BasicTTIImpl
how to query TLI in order to get a more accurate cost for truncates and
zero-extends.
Before this patch, the basic cost heuristic in TargetTransformInfoImplCRTPBase
would have conservatively returned a 'default' TCC_Basic for all zero-extends,
and TCC_Free for truncates on native types.
This patch improves the heuristic so that we query TLI (if available) to get
more accurate answers. If TLI is available, then methods 'isZExtFree' and
'isTruncateFree' can be used to check if a zext/trunc is free for the target.
Added more test cases to SimplifyCFG/X86/speculate-cttz-ctlz.ll.
With this change, SimplifyCFG is now able to speculate a 'cheap' cttz/ctlz
immediately followed by a free zext/trunc.
Differential Revision: http://reviews.llvm.org/D7585
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228923 91177308-0d34-0410-b5e6-96231b3b80d8
The changes in r223113 (ARM modified-immediate syntax) have broken
instructions like:
mov r0, #~0xffffff00
The problem is that I've added a spurious range check on the immediate
operand to ensure that it lies between INT32_MIN and UINT32_MAX. While
this range check is correct in theory, it causes problems because the
operand is stored in an int64_t (by MC). So valid 32-bit constants like
\#~0xffffff00 become out of range. The solution is to simply remove this
range check. It is not possible to validate the range of the immediate
operand with the current setup because: 1) The operand is stored in an
int64_t by MC, 2) The immediate can be of the forms #imm, #-imm, #~imm
or even #((~imm)) etc. So we just chop the value to 32 bits and use it.
Also noted that the original range check was note tested by any of the
unit tests. I've added a new test to cover #~imm kind of operands.
Change-Id: I411e90d84312a2eff01b732bb238af536c4a7599
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228920 91177308-0d34-0410-b5e6-96231b3b80d8
I've built some tests in WebRTC with and without this change. With this change number of __tsan_read/write calls is reduced by 20-40%, binary size decreases by 5-10% and execution time drops by ~5%. For example:
$ ls -l old/modules_unittests new/modules_unittests
-rwxr-x--- 1 dvyukov 41708976 Jan 20 18:35 old/modules_unittests
-rwxr-x--- 1 dvyukov 38294008 Jan 20 18:29 new/modules_unittests
$ objdump -d old/modules_unittests | egrep "callq.*__tsan_(read|write|unaligned)" | wc -l
239871
$ objdump -d new/modules_unittests | egrep "callq.*__tsan_(read|write|unaligned)" | wc -l
148365
http://reviews.llvm.org/D7069
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228917 91177308-0d34-0410-b5e6-96231b3b80d8
Using KORTESTW for comparison i1 value with zero was wrong since the instruction tests 16 bits.
KORTESTW may be used with KSHIFTL+KSHIFTR that clean the 15 upper bits.
I removed (X86cmp i1, 0) pattern and zero-extend i1 to i8 and then use TESTB.
There are some cases where i1 is in the mask register and the upper bits are already zeroed.
Then KORTESTW is the better solution, but it is subject for optimization.
Meanwhile, I'm fixing the correctness issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228916 91177308-0d34-0410-b5e6-96231b3b80d8
This gives a rough estimate of whether using pushes instead of movs is profitable, in terms of size.
We go over all calls in the MachineFunction and compute:
a) For each callsite that can not use pushes, the penalty of not having a reserved call frame.
b) For each callsite that can use pushes, the gain of actually replacing the movs with pushes (and the potential penalty of having to readjust the stack).
Differential Revision: http://reviews.llvm.org/D7561
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228915 91177308-0d34-0410-b5e6-96231b3b80d8
We used to do this DAG combine, but it's not always correct:
If the first fp_round isn't a value preserving truncation, it might
introduce a tie in the second fp_round, that wouldn't occur in the
single-step fp_round we want to fold to.
In other words, double rounding isn't the same as rounding.
Differential Revision: http://reviews.llvm.org/D7571
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228911 91177308-0d34-0410-b5e6-96231b3b80d8
We would crash if we couldn't locate a Function that either Location's
Value belonged to. Now we just print out a debug message and return
conservatively.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228901 91177308-0d34-0410-b5e6-96231b3b80d8
Apparently some code finally started to tickle this after my
canonicalization changes to instcombine.
The bug stems from trying to form a vector type out of scalars that
aren't compatible at all. In this example, from x86_mmx values. The code
in the vectorizer that checks for reasonable types whas checking for
aggregates or vectors, but there are lots of other types that should
just never reach the vectorizer.
Debugging this was made more confusing by the lie in an assert in
VectorType::get() -- it isn't that the types are *primitive*. The types
must be integer, pointer, or floating point types. No other types are
allowed.
I've improved the assert and added a helper to the vectorizer to handle
the element type validity checks. It now re-uses the VectorType static
function and then further excludes weird target-specific types that we
probably shouldn't be touching here (x86_fp80 and ppc_fp128). Neither of
these are really reachable anyways (neither 80-bit nor 128-bit things
will get vectorized) but it seems better to just eagerly exclude such
nonesense.
I've added a test case, but while it definitely covers two of the paths
through this code there may be more paths that would benefit from test
coverage. I'm not familiar enough with the SLP vectorizer to synthesize
test cases for all of these, but was able to update the code itself by
inspection.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228899 91177308-0d34-0410-b5e6-96231b3b80d8
On PowerPC, which has a full set of logical operations on (its multiple sets
of) condition-register bits, it is not profitable to break of complex
conditions feeding a jump into multiple jumps. We can turn off this feature of
CGP/SDAGBuilder by marking jumps as "expensive".
P7 test-suite speedups (no regressions):
MultiSource/Benchmarks/FreeBench/pcompress2/pcompress2
-0.626647% +/- 0.323583%
MultiSource/Benchmarks/Olden/power/power
-18.2821% +/- 8.06481%
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228895 91177308-0d34-0410-b5e6-96231b3b80d8
I mistakenly thought the liveness of each "RetVal(F, i)" depended only on F. It
actually depends on the index too, which means we need to be careful about how
the results are combined before return. In particular if a single Use returns
Live, that counts for the entire object, at the granularity we're considering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228885 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When trying to canonicalize negative constants out of
multiplication expressions, we need to check that the
constant is not INT_MIN which cannot be negated.
Reviewers: mcrosier
Reviewed By: mcrosier
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7286
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228872 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Move calls to get_input_file and release_input_file out of
getModuleForFile(). Otherwise release_input_file may end up
unmapping a view of the file while the view is still being
used by the Module (on 32-bit hosts).
Fix for PR22482.
Test Plan: Add test using --no-map-whole-files.
Reviewers: rafael, nlewycky
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7539
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228842 91177308-0d34-0410-b5e6-96231b3b80d8
This is a union of these commits:
* R600/SI: Enable more tests for VI which need no changes
* R600/SI: Enable V_BCNT tests for VI
Differences:
- v_bcnt_..._e32 -> _e64
- s_load_dword* inline offset is in bytes instead of dwords
* R600/SI: Enable all tests for VI which use S_LOAD_DWORD
The inline offset is changed from dwords to bytes.
* R600/SI: Enable LDS tests for VI
Differences:
- the s_load_dword inline offset changed from dwords to bytes
- the tests checked very little on CI, so they have been fixed to check all
instructions that "SI" checked
* R600/SI: Enable lshr tests for VI
* R600/SI: Fix divrem64 tests
- "v_lshl_64" was missing "b" before "64"
- added VI-NOT checks
* R600/SI: Enable the SI.tid test for VI
* R600/SI: Enable the frem test for VI
Also, the frem_f64 checking is added for CI-VI.
* R600/SI: Add VI tests for rsq.clamped
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228830 91177308-0d34-0410-b5e6-96231b3b80d8
This patch is a follow-up of r228826 (see code-review: D7506).
Now that SimplifyCFG uses TargetTransformInfo for cost analysis, we
have to fix the cost heuristic for intrinsic calls to cttz/ctlz.
This patch defines method 'getIntrinsicCost' in BasicTTIImpl: now, BasicTTIImpl
queries TLI to check if a call to cttz/ctlz is cheap for the target.
Added test cases in Transforms/SimplifyCFG/X86 to verify that on x86,
SimplifyCFG only speculates a call to cttz/ctlz if it is cheap.
Differential Revision: http://reviews.llvm.org/D7554
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228829 91177308-0d34-0410-b5e6-96231b3b80d8
This testcase change was associated incorrectly to a followup commit in my git tree, not the base commit. Sorry!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228827 91177308-0d34-0410-b5e6-96231b3b80d8
analysis.
We're already using TTI in SimplifyCFG, so remove the hard-baked "cheapness"
heuristic and use TTI directly. Generally NFC intended, but we're using a slightly
different heuristic now so there is a slight test churn.
Test changes:
* combine-comparisons-by-cse.ll: Removed unneeded branch check.
* 2014-08-04-muls-it.ll: Test now doesn't branch but emits muleq.
* coalesce-subregs.ll: Superfluous block check.
* 2008-01-02-hoist-fp-add.ll: fadd is safe to speculate. Change to udiv.
* PhiBlockMerge.ll: Superfluous CFG checking code. Main checks still present.
* select-gep.ll: A variable GEP is not expensive, just TCC_Basic, according to the TTI.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228826 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Currently we have Mips32 and Mips64 disassemblers and this causes the target
triple to affect the disassembly despite all the relevant information being in
the ELF header. These implementations do not need to be separate.
This patch merges them together such that the appropriate tables are checked
for the subtarget (e.g. Mips64 is checked when GP64 is enabled).
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7498
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228825 91177308-0d34-0410-b5e6-96231b3b80d8
A DAGRootSet models an induction variable being used in a rerollable
loop. For example:
x[i*3+0] = y1
x[i*3+1] = y2
x[i*3+2] = y3
Base instruction -> i*3
+---+----+
/ | \
ST[y1] +1 +2 <-- Roots
| |
ST[y2] ST[y3]
There may be multiple DAGRootSets, for example:
x[i*2+0] = ... (1)
x[i*2+1] = ... (1)
x[i*2+4] = ... (2)
x[i*2+5] = ... (2)
x[(i+1234)*2+5678] = ... (3)
x[(i+1234)*2+5679] = ... (3)
This concept is similar to the "Scale" member used previously, but allows
multiple independent sets of roots based off the same induction variable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228821 91177308-0d34-0410-b5e6-96231b3b80d8
If the landingpad of the invoke is using a personality function that
catches asynch exceptions, then it can catch a trap.
Also add some landingpads to invalid LLVM IR test cases that lack them.
Over-the-shoulder reviewed by David Majnemer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228782 91177308-0d34-0410-b5e6-96231b3b80d8
The isSigned argument of makeLibCall function was hard-coded to false
(unsigned). This caused zero extension on MIPS64 soft float.
As the result SingleSource/Benchmarks/Stanford/FloatMM test and
SingleSource/UnitTests/2005-07-17-INT-To-FP test failed.
The solution was to use the proper argument.
Patch by Strahinja Petrovic.
Differential Revision: http://reviews.llvm.org/D7292
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228765 91177308-0d34-0410-b5e6-96231b3b80d8
Simply loading or storing the frame pointer is not sufficient for
Windows targets. Instead, create a synthetic frame object that we will
lower later. References to this synthetic object will be replaced with
the correct reference to the frame address.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228748 91177308-0d34-0410-b5e6-96231b3b80d8
Unless we meet an insertvalue on a path from some value to a return, that value
will be live if *any* of the return's components are live, so all of those
components must be added to the MaybeLiveUses.
Previously we were deleting arguments if sub-value 0 turned out to be dead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228731 91177308-0d34-0410-b5e6-96231b3b80d8
See full discussion in http://reviews.llvm.org/D7491.
We now hide the add-immediate and call instructions together in a
separate pseudo-op, which is tagged to define GPR3 and clobber the
call-killed registers. The PPCTLSDynamicCall pass prior to RA now
expands this op into the two separate addi and call ops, with explicit
definitions of GPR3 on both instructions, and explicit clobbers on the
call instruction. The pass is now marked as requiring and preserving
the LiveIntervals and SlotIndexes analyses, and fixes these up after
the replacement sequences are introduced.
Self-hosting has been verified on LE P8 and BE P7 with various
optimization levels, etc. It has also been verified with the
--no-tls-optimize flag workaround removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228725 91177308-0d34-0410-b5e6-96231b3b80d8
Some old assembly code uses the cntlz alias for cntlzw, binutils supports this,
and we should too. Fixes PR22519.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228719 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds the complete AMD Bulldozer XOP instruction set to the memory folding pattern tables for stack folding, etc.
Note: Many of the XOP instructions have multiple table entries as it can fold loads from different sources.
Differential Revision: http://reviews.llvm.org/D7484
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228685 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches X86FastISel how to select AVX instructions for scalar
float/double convert operations.
Before this patch, X86FastISel always selected legacy SSE instructions
for FPExt (from float to double) and FPTrunc (from double to float).
For example:
\code
define double @foo(float %f) {
%conv = fpext float %f to double
ret double %conv
}
\end code
Before (with -mattr=+avx -fast-isel) X86FastIsel selected a CVTSS2SDrr which is
legacy SSE:
cvtss2sd %xmm0, %xmm0
With this patch, X86FastIsel selects a VCVTSS2SDrr instead:
vcvtss2sd %xmm0, %xmm0, %xmm0
Added test fast-isel-fptrunc-fpext.ll to check both the register-register and
the register-memory float/double conversion variants.
Differential Revision: http://reviews.llvm.org/D7438
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228682 91177308-0d34-0410-b5e6-96231b3b80d8
This commit isn't using the correct context, and is transfoming calls
that are operands to loads rather than calls that are operands to an
icmp feeding into an assume. I've replied on the original review thread
with a very reduced test case and some thoughts on how to rework this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228677 91177308-0d34-0410-b5e6-96231b3b80d8
nodes when folding bitcasts of constants.
We can't fold things and then check after-the-fact whether it was legal.
Once we have formed the DAG node, arbitrary other nodes may have been
collapsed to it. There is no easy way to go back. Instead, we need to
test for the specific folding cases we're interested in and ensure those
are legal first.
This could in theory make this less powerful for bitcasting from an
integer to some vector type, but AFAICT, that can't actually happen in
the SDAG so its fine. Now, we *only* whitelist specific int->fp and
fp->int bitcasts for post-legalization folding. I've added the test case
from the PR.
(Also as a note, this does not appear to be in 3.6, no backport needed)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228656 91177308-0d34-0410-b5e6-96231b3b80d8
Win64 has specific contraints on what valid prologues and epilogues look
like. This constraint is born from the flexibility and descriptiveness
of Win64's unwind opcodes.
Prologues previously emitted by LLVM could not be represented by the
unwind opcodes, preventing operations powered by stack unwinding to
successfully work.
Differential Revision: http://reviews.llvm.org/D7520
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228641 91177308-0d34-0410-b5e6-96231b3b80d8
for any padding introduced by SROA. In particular, do not emit debug info
for an alloca that represents only the padding introduced by a previous
iteration.
Fixes PR22495.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228632 91177308-0d34-0410-b5e6-96231b3b80d8
intermediate representation. This
- increases consistency by using the same granularity everywhere
- allows for pieces < 1 byte
- DW_OP_piece didn't actually allow storing an offset.
Part of PR22495.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228631 91177308-0d34-0410-b5e6-96231b3b80d8
Remove handling for DW_TAG_constant. We started producing it in
r110656, but reverted that in r110876 without dropping the support.
Finish the job.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228623 91177308-0d34-0410-b5e6-96231b3b80d8
These tests the two optimizations for backedge insertion currently implemented and the split backedge flag which is currently off by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228617 91177308-0d34-0410-b5e6-96231b3b80d8
This is just adding really simple tests which should have been part of the original submission. When doing so, I discovered that I'd mistakenly removed required pieces when preparing the patch for upstream submission. I fixed two such bugs in this submission.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228610 91177308-0d34-0410-b5e6-96231b3b80d8
When creating a scev for sext({X,+,Y}), scev checks if the expression
is equivalent to {sext X,+,zext Y}. If it can prove that, it also
tags the original {X,+,Y} as <nsw>, which is not correct.
In the test case I run `-scalar-evolution` twice because the bug
manifests only once SCEV has run through and seen the `sext`
expressions (and then does a in-place mutation on {X,+,Y}).
Differential Revision: http://reviews.llvm.org/D7495
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228586 91177308-0d34-0410-b5e6-96231b3b80d8
veqv (vector equivalence)
vnand
vorc
I increased the AddedComplexity for these instructions to 500 to ensure they are generated instead of issuing other VSX instructions.
Phabricator review: http://reviews.llvm.org/D7469
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228580 91177308-0d34-0410-b5e6-96231b3b80d8
For the attached test case different types are used in the ICmpInst
and SelectInst that represent the min/max expressions. However, if the
ICmpInst type is smaller a comparison with the sign/zero extended
operands would have yielded the same result. This situation might
arise after the instruction combination pass was applied.
Differential Revision: http://reviews.llvm.org/D7338
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228572 91177308-0d34-0410-b5e6-96231b3b80d8
wrong basic block.
This would happen when the result of an invoke was used by a phi instruction
in the invoke's normal destination block. An instruction to reload the invoke's
value would get inserted before the critical edge was split and a new basic
block (which is the correct insertion point for the reload) was created. This
commit fixes the bug by splitting the critical edge before all the reload
instructions are inserted.
Also, hoist up the code which computes the insertion point to the only place
that need that computation.
rdar://problem/15978721
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228566 91177308-0d34-0410-b5e6-96231b3b80d8
Some parts of DeadArgElim were only considering the individual fields
of StructTypes separately, but others (where insertvalue &
extractvalue instructions occur) also looked into ArrayTypes.
This one is an actual bug; the mismatch can lead to an argument being
considered used by a return sub-value that isn't being tracked (and
hence is dead by default). It then gets incorrectly eliminated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228559 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, a non-extractvalue use of an aggregate return value meant
the entire return was considered live (the algorithm gave up
entirely). This was correct, but conservative. It's better to actually
look at that Use, making the analysis results apply to all sub-values
under consideration.
E.g.
%val = call { i32, i32 } @whatever()
[...]
ret { i32, i32 } %val
The return is using the entire aggregate (sub-values 0 and 1). We can
still simplify @whatever if we can prove that this return is itself
unused.
Also unifies the logic slightly between aggregate and non-aggregate
cases..
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228558 91177308-0d34-0410-b5e6-96231b3b80d8
add recurrences don't overflow.
This change makes the optimization more restrictive. It still assumes
that an overflowing `add nsw` is undefined behavior; and this change
will need revisiting once we have a consistent semantics for poison
values.
Differential Revision: http://reviews.llvm.org/D7331
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228552 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The alias.scope metadata represents sets of things an instruction might
alias with. When generically combining the metadata from two
instructions the result must be the union of the original sets, because
the new instruction might alias with anything any of the original
instructions aliased with.
Reviewers: hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7490
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228525 91177308-0d34-0410-b5e6-96231b3b80d8
While various DAG combines try to guarantee that a vector SETCC
operation will have the same output size as input, there's nothing
intrinsic to either creation or LegalizeTypes that actually guarantees
it, so the function needs to be ready to handle a mismatch.
Fortunately this is easy enough, just extend or truncate the naturally
compared result.
I couldn't reproduce the failure in other backends that I know have
SIMD, so it's probably only an issue for these two due to shared
heritage.
Should fix PR21645.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228518 91177308-0d34-0410-b5e6-96231b3b80d8
Turns out there is a simpler way of checking that all bytes in a word are equal
than binary decomposition.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228503 91177308-0d34-0410-b5e6-96231b3b80d8
different fields.
We can show that two GEPs off of the same (possibly multidimensional)
array of structs, into different fields, can't alias. Quoting:
For two GEPOperators GEP1 and GEP2, if we find that:
- both GEPs begin indexing from the exact same pointer;
- the last indices in both GEPs are constants, indexing into a struct;
- said indices are different, hence,the pointed-to fields are different;
- and both GEPs only index through arrays prior to that;
this lets us determine that the struct that GEP1 indexes into and the
struct that GEP2 indexes into must either precisely overlap or be
completely disjoint. Because they cannot partially overlap, indexing
into different non-overlapping fields of the struct will never alias.
The other BasicAA::aliasGEP rules worked in some cases, but not all
(for example, the i32x3 struct in the testcase).
We can add this simple ad-hoc rule to complement them.
rdar://19717375
Differential Revision: http://reviews.llvm.org/D7453
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228498 91177308-0d34-0410-b5e6-96231b3b80d8
General boolean instructions (AND, ANDN, OR, XOR) need to use a specific domain instruction (and not just the default).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228495 91177308-0d34-0410-b5e6-96231b3b80d8
COFF section flags are not idempotent:
'rd' will make a read-write section because 'd' implies write
'dr' will make a read-only section because 'r' disables write
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228490 91177308-0d34-0410-b5e6-96231b3b80d8
If a loop predecessor has an invoke as its terminator, and the return value
from that invoke is used to determine the loop iteration space, then we can't
insert a computation based on that value in the loop predecessor prior to the
terminator (oops). If there's such an invoke, or just no predecessor for that
matter, insert a new loop preheader.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228488 91177308-0d34-0410-b5e6-96231b3b80d8
Unfortunately, even with the workaround of disabling the linker TLS
optimizations in Clang restored (which has already been done), this still
breaks self-hosting on my P7 machine (-O3 -DNDEBUG -mcpu=native).
Bill is currently working on an alternate implementation to address the TLS
issue in a way that also fully elides the linker bug (which, unfortunately,
this approach did not fully), so I'm reverting this now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228460 91177308-0d34-0410-b5e6-96231b3b80d8
Remove unnecessary restriction of 24-bits for line numbers in
`MDLocation`.
The rest of the debug info schema (with the exception of local
variables) uses 32-bits for line numbers. As I introduce the
specialized nodes, it makes sense to canonicalize on one size or the
other.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228455 91177308-0d34-0410-b5e6-96231b3b80d8
An atomic store always make the target location fully initialized (in the
current implementation). It should not store origin. Initialized memory can't
have meaningful origin, and, due to origin granularity (4 bytes) there is a
chance that this extra store would overwrite meaningfull origin for an adjacent
location.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228444 91177308-0d34-0410-b5e6-96231b3b80d8
Normalize
select(C0, select(C1, a, b), b) -> select((C0 & C1), a, b)
select(C0, a, select(C1, a, b)) -> select((C0 | C1), a, b)
This normal form may enable further combines on the And/Or and shortens
paths for the values. Many targets prefer the other but can go back
easily in CodeGen.
Differential Revision: http://reviews.llvm.org/D7399
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228409 91177308-0d34-0410-b5e6-96231b3b80d8
Doesn't seem necessary anymore. I think this was mostly compensating for
not enabling WQM for texture sampling instructions.
v2: Add test coverage
Reviewed-by: Tom Stellard <tom@stellard.net>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228373 91177308-0d34-0410-b5e6-96231b3b80d8
If whole quad mode isn't enabled for these, the level of detail is
calculated incorrectly for pixels along diagonal triangle edges, causing
artifacts.
v2: Use a TSFlag instead of lots of switch cases
v3: Add test coverage
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88642
Reviewed-by: Tom Stellard <tom@stellard.net>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228372 91177308-0d34-0410-b5e6-96231b3b80d8
Since testing the function indirectly is tricky, introduce a direct
print-memderefs pass, in the same spirit as print-memdeps, which prints
dereferenceability information matched by FileCheck.
Differential Revision: http://reviews.llvm.org/D7075
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228369 91177308-0d34-0410-b5e6-96231b3b80d8
Avoid the creation of select instructions which can result in different
scheduling of the selects.
I also added a bunch of additional store volatiles. Those avoid A
CodeGen problem (bug?) where normalizes and denomarlizing the control
moves all shift instructions into the first block where ISel can't match
them together with the cmps.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228362 91177308-0d34-0410-b5e6-96231b3b80d8
Use FileCheck, make it more consistent and do not rely on unoptimized
or(cmp,cmp) getting combined for max to be matched.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228361 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes PR22462: two of the tests have regressed for a while,
but were using CHECK-NOT to match "May:". The actual output
was changed to "MayAlias:" at some point, which made the tests
useless.
Two others return MayAlias only because of a lack of analysis;
BasicAA returns PartialAlias in those cases, when a datalayout
is present.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228346 91177308-0d34-0410-b5e6-96231b3b80d8
PowerPC supports pre-increment load/store instructions (except for Altivec/VSX
vector load/stores). Using these on embedded cores can be very important, but
most loops are not naturally set up to use them. We can often change that,
however, by placing loops into a non-canonical form. Generically, this means
transforming loops like this:
for (int i = 0; i < n; ++i)
array[i] = c;
to look like this:
T *p = array[-1];
for (int i = 0; i < n; ++i)
*++p = c;
the key point is that addresses accessed are pulled into dedicated PHIs and
"pre-decremented" in the loop preheader. This allows the use of pre-increment
load/store instructions without loop peeling.
A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is
introduced to perform this transformation. I've used this code out-of-tree for
generating code for the PPC A2 for over a year. Somewhat to my surprise,
running the test suite + externals on a P7 with this transformation enabled
showed no performance regressions, and one speedup:
External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk
-2.32514% +/- 1.03736%
So I'm going to enable it on everything for now. I was surprised by this
because, on the POWER cores, these pre-increment load/store instructions are
cracked (and, thus, harder to schedule effectively). But seeing no regressions,
and feeling that it is generally easier to split instructions apart late than
it is to combine them late, this might be the better approach regardless.
In the future, we might want to integrate this functionality into LSR (but
currently LSR does not create new PHI nodes, so (for that and other reasons)
significant work would need to be done).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228328 91177308-0d34-0410-b5e6-96231b3b80d8
PowerPC supports pre-increment floating-point load/store instructions, both r+r
and r+i, and we had patterns for them, but they were not marked as legal. Mark
them as legal (and add a test case).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228327 91177308-0d34-0410-b5e6-96231b3b80d8
The combine that forms extloads used to be disabled on vector types,
because "None of the supported targets knows how to perform load and
sign extend on vectors in one instruction."
That's not entirely true, since at least SSE4.1 X86 knows how to do
those sextloads/zextloads (with PMOVS/ZX).
But there are several aspects to getting this right.
First, vector extloads are controlled by a profitability callback.
For instance, on ARM, several instructions have folded extload forms,
so it's not always beneficial to create an extload node (and trying to
match extloads is a whole 'nother can of worms).
The interesting optimization enables folding of s/zextloads to illegal
(splittable) vector types, expanding them into smaller legal extloads.
It's not ideal (it introduces some legalization-like behavior in the
combine) but it's better than the obvious alternative: form illegal
extloads, and later try to split them up. If you do that, you might
generate extloads that can't be split up, but have a valid ext+load
expansion. At vector-op legalization time, it's too late to generate
this kind of code, so you end up forced to scalarize. It's better to
just avoid creating egregiously illegal nodes.
This optimization is enabled unconditionally on X86.
Note that the splitting combine is happy with "custom" extloads. As
is, this bypasses the actual custom lowering, and just unrolls the
extload. But from what I've seen, this is still much better than the
current custom lowering, which does some kind of unrolling at the end
anyway (see for instance load_sext_4i8_to_4i64 on SSE2, and the added
FIXME).
Also note that the existing combine that forms extloads is now also
enabled on legal vectors. This doesn't have a big effect on X86
(because sext+load is usually combined to sext_inreg+aextload).
On ARM it fires on some rare occasions; that's for a separate commit.
Differential Revision: http://reviews.llvm.org/D6904
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228325 91177308-0d34-0410-b5e6-96231b3b80d8
The return value's address must be returned in %rax.
i.e. the callee needs to copy the sret argument (%rdi)
into the return value (%rax).
This probably won't manifest as a bug when the caller is LLVM-compiled
code. But it is an ABI guarantee and tools expect it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228321 91177308-0d34-0410-b5e6-96231b3b80d8
We should be setting UnrollingPreferences::MaxCount to MAX_UINT instead
of UnrollingPreferences::Count.
Count is a 'forced unrolling factor', while MaxCount sets an upper
limit to the unrolling factor.
Setting Count to MAX_UINT was causing the loop in the testcase to be
unrolled 15 times, when it only had a maximum of 4 iterations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228303 91177308-0d34-0410-b5e6-96231b3b80d8
The llvm.SI.end.cf intrinsic is used to mark the end of if-then blocks,
if-then-else blocks, and loops. It is responsible for updating the
exec mask to re-enable threads that had been masked during the preceding
control flow block. For example:
s_mov_b64 exec, 0x3 ; Initial exec mask
s_mov_b64 s[0:1], exec ; Saved exec mask
v_cmpx_gt_u32 exec, s[2:3], v0, 0 ; llvm.SI.if
do_stuff()
s_or_b64 exec, exec, s[0:1] ; llvm.SI.end.cf
The bug fixed by this patch was one where the llvm.SI.end.cf intrinsic
was being inserted into the header of loops. This would happen when
an if block terminated in a loop header and we would end up with
code like this:
s_mov_b64 exec, 0x3 ; Initial exec mask
s_mov_b64 s[0:1], exec ; Saved exec mask
v_cmpx_gt_u32 exec, s[2:3], v0, 0 ; llvm.SI.if
do_stuff()
LOOP: ; Start of loop header
s_or_b64 exec, exec, s[0:1] ; llvm.SI.end.cf <-BUG: The exec mask has the
same value at the beginning of each loop
iteration.
do_stuff();
s_cbranch_execnz LOOP
The fix is to create a new basic block before the loop and insert the
llvm.SI.end.cf there. This way the exec mask is restored before the
start of the loop instead of at the beginning of each iteration.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228302 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Kit Barton.
Add the vector count leading zeros instruction for byte, halfword,
word, and doubleword sizes. This is a fairly straightforward addition
after the changes made for vpopcnt:
1. Add the correct definitions for the various instructions in
PPCInstrAltivec.td
2. Make the CTLZ operation legal on vector types when using P8Altivec
in PPCISelLowering.cpp
Test Plan
Created new test case in test/CodeGen/PowerPC/vec_clz.ll to check the
instructions are being generated when the CTLZ operation is used in
LLVM.
Check the encoding and decoding in test/MC/PowerPC/ppc_encoding_vmx.s
and test/Disassembler/PowerPC/ppc_encoding_vmx.txt respectively.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228301 91177308-0d34-0410-b5e6-96231b3b80d8
Implement a BITCAST dag combine to transform i32->mmx conversion patterns
into a X86 specific node (MMX_MOVW2D) and guarantee that moves between
i32 and x86mmx are better handled, i.e., don't use store-load to do the
conversion..
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228293 91177308-0d34-0410-b5e6-96231b3b80d8
Avoid regression in previously supported MMX code by adding different
combinations of tests which exercise MMX bitcasts. Small improvements
to these patterns should come next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228292 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: When evaluating floating point instructions in the inliner, ask the TTI whether it is an expensive operation. By default, it's not an expensive operation. This keeps the default behavior the same as before. The ARM TTI has been updated to return back TCC_Expensive for targets which don't have hardware floating point.
Reviewers: chandlerc, echristo
Reviewed By: echristo
Subscribers: t.p.northover, aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D6936
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228263 91177308-0d34-0410-b5e6-96231b3b80d8