These used to be referenced by the CGI->AWI map (in AsmWriterEmitter), but
stored in a vector local to EmitPrintInstruction. Move the vector to
AsmWriterEmitter too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193525 91177308-0d34-0410-b5e6-96231b3b80d8
This is useful for some ARM intrinsics such as VCVTN which does a <4 x float> <-> <4 x half> conversion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191870 91177308-0d34-0410-b5e6-96231b3b80d8
The old code skipped one of the sorting criteria if either pattern had
no types. This could lead to cycles of the form X < Y, Y < Z, Z < X.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191735 91177308-0d34-0410-b5e6-96231b3b80d8
Add VEX_LIG to scalar FMA4 instructions.
Use VEX_LIG in some of the inheriting checks in disassembler table generator.
Make use of VEX_L_W, VEX_L_W_XS, VEX_L_W_XD contexts.
Don't let VEX_L_W, VEX_L_W_XS, VEX_L_W_XD, VEX_L_W_OPSIZE inherit from their non-L forms unless VEX_LIG is set.
Let VEX_L_W, VEX_L_W_XS, VEX_L_W_XD, VEX_L_W_OPSIZE inherit from all of their non-L or non-W cases.
Increase ranking on VEX_L_W, VEX_L_W_XS, VEX_L_W_XD, VEX_L_W_OPSIZE so they get chosen over non-L/non-W forms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191649 91177308-0d34-0410-b5e6-96231b3b80d8
Ideally, the machinel model is added at the time the instructions are
defined. But many instructions in X86InstrSSE.td still need a model.
Without this workaround the scheduler asserts because x86 already has
itinerary classes for these instructions, indicating they should be
modeled by the scheduler. Since we use the new machine model for other
instructions, it expects a new machine model for these too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191391 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Ana Pazos.
1.Added support for v1ix and v1fx types.
2.Added Scalar Pairwise Reduce instructions.
3.Added initial implementation of Scalar Arithmetic instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191263 91177308-0d34-0410-b5e6-96231b3b80d8
This makes using array_pod_sort significantly safer. The implementation relies
on function pointer casting but that should be safe as we're dealing with void*
here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191175 91177308-0d34-0410-b5e6-96231b3b80d8
TableGen was sorting the entries in some of its internal data
structures by pointer. This order filtered through to the final
matching table and affected the diagnostics produced on bad assembly
occasionally.
It also turns out STL algorithms are ridiculously easy to misuse on
containers with custom order methods. (No bugs before, or now that I
know of, but plenty in the middle).
This should fix the sanitizer bot, which ends up with weird pointers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190793 91177308-0d34-0410-b5e6-96231b3b80d8
The 'Deprecated' class allows you to specify a SubtargetFeature that the
instruction is deprecated on.
The 'ComplexDeprecationPredicate' class allows you to define a custom
predicate that is called to check for deprecation.
For example:
ComplexDeprecationPredicate<"MCR">
would mean you would have to define the following function:
bool getMCRDeprecationInfo(MCInst &MI, MCSubtargetInfo &STI,
std::string &Info)
Which returns 'false' for not deprecated, and 'true' for deprecated
and store the warning message in 'Info'.
The MCTargetAsmParser constructor was chaned to take an extra argument of
the MCInstrInfo class, so out-of-tree targets will need to be changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190598 91177308-0d34-0410-b5e6-96231b3b80d8
Link.exe's command line options are case-insensitive. This patch
adds a new attribute to OptTable to let the option parser to compare
options, ignoring case.
Command lines are generally case-insensitive on Windows. CL.exe is an
exception. So this new attribute should be useful for other commands
running on Windows.
Differential Revision: http://llvm-reviews.chandlerc.com/D1485
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189416 91177308-0d34-0410-b5e6-96231b3b80d8
This field specifies registers that are preserved across function calls,
but that should not be included in the generates SaveList array.
This can be used ot generate regmasks for architectures that save
registers through other means, like SPARC's register windows.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189084 91177308-0d34-0410-b5e6-96231b3b80d8
Back in the mists of time (2008), it seems TableGen couldn't handle the
patterns necessary to match ARM's CMOV node that we convert select operations
to, so we wrote a lot of fairly hairy C++ to do it for us.
TableGen can deal with it now: there were a few minor differences to CodeGen
(see tests), but nothing obviously worse that I could see, so we should
probably address anything that *does* come up in a localised manner.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188995 91177308-0d34-0410-b5e6-96231b3b80d8
Added v8f16 to ValueTypes.h, ValueTypes.cpp, ValueTypes.td,
and CodeGenTarget.cpp
Patch by Daniel Sanders
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188326 91177308-0d34-0410-b5e6-96231b3b80d8
clang bootstraps intermittently failed for me due a difference in
the MCK_Reg ordering in ARMGenAsmMatcher.inc. E.g. in my latest
run the stage 1 and stage 3 versions were the same but the stage 2
one was different (though still functionally correct). This meant
that the .o comparison failed.
MCK_Regs were assigned by iterating over a std::set< std::set<Record*> >,
and since std::set is sorted lexicographically, the order depended on the
order of the pointer values. This patch replaces the pointer ordering
with LessRecordByID.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188164 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM's coding standards recommend raw_ostream and MemoryBuffer for
reading and writing text.
This has the side effect of allowing clang to compile more of Support
and TableGen in the Microsoft C++ ABI.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187826 91177308-0d34-0410-b5e6-96231b3b80d8
The clients of this code have been updated to all support AliasArgs.
This depends on Clang r187538 and lld r187541.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187546 91177308-0d34-0410-b5e6-96231b3b80d8
This makes option aliases more powerful by enabling them to
pass along arguments to the option they're aliasing.
For example, if we have a joined option "-foo=", we can now
specify a flag option "-bar" to be an alias of that, with the
argument "baz".
This is especially useful for the cl.exe compatible clang driver,
where many options are aliases. For example, this patch enables
us to alias "/Ox" to "-O3" (-O is a joined option), and "/WX" to
"-Werror" (again, -W is a joined option).
Differential Revision: http://llvm-reviews.chandlerc.com/D1245
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187537 91177308-0d34-0410-b5e6-96231b3b80d8
For two intrinsics 'llvm.nvvm.texsurf.handle' and 'llvm.nvvm.texsurf.handle.internal',
TableGen was emitting matching code like:
if (Name.startswith("llvm.nvvm.texsurf.handle")) ...
if (Name.startswith("llvm.nvvm.texsurf.handle.internal")) ...
We can never match "llvm.nvvm.texsurf.handle.internal" here because it will
always be erroneously matched by the first condition.
The fix is to sort the intrinsic names and emit them in reverse order.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187119 91177308-0d34-0410-b5e6-96231b3b80d8
This removes the need to store the asm variant in each row of the single table that existed before. Shaves ~16K off the size of X86AsmParser.o.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187026 91177308-0d34-0410-b5e6-96231b3b80d8
functions. Make the function attributes pass add it to known library functions
and when it can deduce it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185735 91177308-0d34-0410-b5e6-96231b3b80d8
algorithm when assigning EnumValues to the synthesized registers.
The current algorithm, LessRecord, uses the StringRef compare_numeric
function. This function compares strings, while handling embedded numbers.
For example, the R600 backend registers are sorted as follows:
T1
T1_W
T1_X
T1_XYZW
T1_Y
T1_Z
T2
T2_W
T2_X
T2_XYZW
T2_Y
T2_Z
In this example, the 'scaling factor' is dEnum/dN = 6 because T0, T1, T2
have an EnumValue offset of 6 from one another. However, in other parts
of the register bank, the scaling factors are different:
dEnum/dN = 5:
KC0_128_W
KC0_128_X
KC0_128_XYZW
KC0_128_Y
KC0_128_Z
KC0_129_W
KC0_129_X
KC0_129_XYZW
KC0_129_Y
KC0_129_Z
The diff lists do not work correctly because different kinds of registers have
different 'scaling factors'. This new algorithm, LessRecordRegister, tries to
enforce a scaling factor of 1. For example, the registers are now sorted as
follows:
T1
T2
T3
...
T0_W
T1_W
T2_W
...
T0_X
T1_X
T2_X
...
KC0_128_W
KC0_129_W
KC0_130_W
...
For the Mips and R600 I see a 19% and 6% reduction in size, respectively. I
did see a few small regressions, but the differences were on the order of a
few bytes (e.g., AArch64 was 16 bytes). I suspect there will be even
greater wins for targets with larger register files.
Patch reviewed by Jakob.
rdar://14006013
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185094 91177308-0d34-0410-b5e6-96231b3b80d8
This patch modifies TableGen to generate a function in
${TARGET}GenInstrInfo.inc called getNamedOperandIdx(), which can be used
to look up indices for operands based on their names.
In order to activate this feature for an instruction, you must set the
UseNamedOperandTable bit.
For example, if you have an instruction like:
def ADD : TargetInstr <(outs GPR:$dst), (ins GPR:$src0, GPR:$src1)>;
You can look up the operand indices using the new function, like this:
Target::getNamedOperandIdx(Target::ADD, Target::OpName::dst) => 0
Target::getNamedOperandIdx(Target::ADD, Target::OpName::src0) => 1
Target::getNamedOperandIdx(Target::ADD, Target::OpName::src1) => 2
The operand names are case sensitive, so $dst and $DST are considered
different operands.
This change is useful for R600 which has instructions with a large number
of operands, many of which model single bit instruction configuration
values. These configuration bits are common across most instructions,
but may have a different operand index depending on the instruction type.
It is useful to have a convenient way to look up the operand indices,
so these bits can be generically set on any instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184879 91177308-0d34-0410-b5e6-96231b3b80d8
For decoding, keep the current behavior of always decoding these as their REP
versions. In the future, this could be improved to recognize the cases where
these behave as XACQUIRE and XRELEASE and decode them as such.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184207 91177308-0d34-0410-b5e6-96231b3b80d8
Replace the ill-defined MinLatency and ILPWindow properties with
with straightforward buffer sizes:
MCSchedMode::MicroOpBufferSize
MCProcResourceDesc::BufferSize
These can be used to more precisely model instruction execution if desired.
Disabled some misched tests temporarily. They'll be reenabled in a few commits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184032 91177308-0d34-0410-b5e6-96231b3b80d8
The element passed to push_back is not copied before the vector reallocates.
The client needs to copy the element first before passing it to push_back.
No test case, will be tested by follow-up swift scheduler model change (it
segfaults without this change).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183459 91177308-0d34-0410-b5e6-96231b3b80d8
Don't output data if we are supposed to ignore the record.
Reapply of 183255, I don't think this was causing the tablegen segfault on linux
testers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183311 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes some of the ridiculously complex code for optimizing the
machine model tables that are shared among all processors of a given
target. A9 and Swift both use the "special" feature that maps old
itinerary classes to new machine model defs. They map different
overlapping subsets of instructions, which wasn't handled correctly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183302 91177308-0d34-0410-b5e6-96231b3b80d8
NOTE: If this broke your out-of-tree backend, in *RegisterInfo.td, change
the instances of SubRegIndex that have a comps template arg to use the
ComposedSubRegIndex class instead.
In TableGen land, this adds Size and Offset attributes to SubRegIndex,
and the ComposedSubRegIndex class, for which the Size and Offset are
computed by TableGen. This also adds an accessor in MCRegisterInfo, and
Size/Offsets for the X86 and ARM subreg indices.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183020 91177308-0d34-0410-b5e6-96231b3b80d8
The size reduction in the RegDiffLists are rather dramatic. Here are a few
size differences for MCTargetDesc.o files (before and after) in bytes:
R600 - 36160B - 11184B - 69% reduction
ARM - 28480B - 8368B - 71% reduction
Mips - 816B - 576B - 29% reduction
One side effect of dynamically computing the aliases is that the iterator does
not guarantee that the entries are ordered or that duplicates have been removed.
The documentation implies this is a safe assumption and I found no clients that
requires these attributes (i.e., strict ordering and uniqueness).
My local LNT tester results showed no execution-time failures or significant
compile-time regressions (i.e., beyond what I would consider noise) for -O0g,
-O2 and -O3 runs on x86_64 and i386 configurations.
rdar://12906217
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182783 91177308-0d34-0410-b5e6-96231b3b80d8
Currently the fast-isel table generator recognizes registers, register
classes, and immediates for source pattern operands. ValueType
operands are not recognized. This is not a problem for existing
targets with fast-isel support, but will not work for targets like
PowerPC and SPARC that use types in source patterns.
The proposed patch allows ValueType operands and treats them in the
same manner as register classes. There is no convenient way to map
from a ValueType to a register class, but there's no need to do so.
The table generator already requires that all types in the source
pattern be identical, and we know the register class of the output
operand already. So we just assign that register class to any
ValueType operands we encounter.
No functional effect on existing targets. Testing deferred until the
PowerPC target implements fast-isel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182512 91177308-0d34-0410-b5e6-96231b3b80d8
This lane mask provides information about which register lanes
completely cover super-registers. See the block comment before
getCoveringLanes().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182034 91177308-0d34-0410-b5e6-96231b3b80d8
The problem this patch addresses is the handling of register tie
constraints in AsmMatcherEmitter, where one operand is tied to a
sub-operand of another operand. The typical scenario for this to
happen is the tie between the "write-back" register of a pre-inc
instruction, and the base register sub-operand of the memory address
operand of that instruction.
The current AsmMatcherEmitter code attempts to handle tied
operands by emitting the operand as usual first, and emitting
a CVT_Tied node when handling the second (tied) operand. However,
this really only works correctly if the tied operand does not
have sub-operands (and isn't a sub-operand itself). Under those
circumstances, a wrong MC operand list is generated.
In discussions with Jim Grosbach, it turned out that the MC operand
list really ought not to contain tied operands in the first place;
instead, it ought to consist of exactly those operands that are
named in the AsmString. However, getting there requires significant
rework of (some) targets.
This patch fixes the immediate problem, and at the same time makes
one (small) step in the direction of the long-term solution, by
implementing two changes:
1. Restricts the AsmMatcherEmitter handling of tied operands to
apply solely to simple operands (not complex operands or
sub-operand of such).
This means that at least we don't get silently corrupt MC operand
lists as output. However, if we do have tied sub-operands, they
would now no longer be handled at all, except for:
2. If we have an operand that does not occur in the AsmString,
and also isn't handled as tied operand, simply emit a dummy
MC operand (constant 0).
This works as long as target code never attempts to access
MC operands that do no not occur in the AsmString (and are
not tied simple operands), which happens to be the case for
all targets where this situation can occur (ARM and PowerPC).
[ Note that this change means that many of the ARM custom
converters are now superfluous, since the implement the
same "hack" now performed already by common code. ]
Longer term, we ought to fix targets to never access *any*
MC operand that does not occur in the AsmString (including
tied simple operands), and then finally completely remove
all such operands from the MC operand list.
Patch approved by Jim Grosbach.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180677 91177308-0d34-0410-b5e6-96231b3b80d8
Super-resources and resource groups are two ways of expressing
overlapping sets of processor resources. Now we generate table entries
the same way for both so the scheduler never needs to explicitly check
for super-resources.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180162 91177308-0d34-0410-b5e6-96231b3b80d8
variant/dialect. Addresses a FIXME in the emitMnemonicAliases function.
Use and test case to come shortly.
rdar://13688439 and part of PR13340.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179804 91177308-0d34-0410-b5e6-96231b3b80d8