v1024 = EDI // not killed
=
= EDI
One possible solution is for the coalescer to examine the sub-register live intervals in the same manner as the physical register. Another possibility is to examine defs and uses (when needed) of sub-registers. Both solutions are too expensive. For now, look for "short virtual intervals" and scan instructions to look for conflict instead.
This is a small win on x86-64. e.g. It shaves 403.gcc by ~80 instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61847 91177308-0d34-0410-b5e6-96231b3b80d8
into their left operand, rather than their right. Do this
by commuting the operands and inverting the condition.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61842 91177308-0d34-0410-b5e6-96231b3b80d8
avoid the need for spilling, add a new testcase that tests that the
pcmpeqd used for V_SETALLONES is changed to a constant-pool load as
needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61831 91177308-0d34-0410-b5e6-96231b3b80d8
converted to LEA64_32r in x86's convertToThreeAddress. This
replaces code like this:
movl %esi, %edi
inc %edi
with this:
lea 1(%rsi), %edi
which appears to be beneficial.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61830 91177308-0d34-0410-b5e6-96231b3b80d8
aggregate types. Don't increment the current index after reaching
the end of a struct, as it will already be pointing at
one-past-the end. This fixes PR3288.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61828 91177308-0d34-0410-b5e6-96231b3b80d8
- Fix bugs 3194, 3195: i128 load/stores produce correct code (although, we
need to ensure that i128 is 16-byte aligned in real life), and 128 zero-
extends are supported.
- New td file: SPU128InstrInfo.td: this is where all new i128 support should
be put in the future.
- Continue to hammer on i64 operations and test cases; ensure that the only
remaining problem will be i64 mul.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61784 91177308-0d34-0410-b5e6-96231b3b80d8
AddPseudoTwoAddrDeps. This lets the scheduling infrastructure
avoid recalculating node heights. In very large testcases this
was a major bottleneck. Thanks to Roman Levenstein for finding
this!
As a side effect, fold-pcmpeqd-0.ll is now scheduled better
and it no longer requires spilling on x86-32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61778 91177308-0d34-0410-b5e6-96231b3b80d8
- Fix (brcond (setq ...)) bug, where BRNZ should have been used vice BRZ.
- Kill unused/unnecessary nodes in SPUNodes.td
- Beef out the i64operations.c test harness to use a lot of unaligned
loads, test loops and LLVM loop/basic block optimizations; run the
test harness successfully on real Cell hardware.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61664 91177308-0d34-0410-b5e6-96231b3b80d8
- Remove custom lowering for BRCOND
- Add remaining functionality for branches in SPUInstrInfo, such as branch
condition reversal and load/store folding. Updated BrCond test to reflect
branch reversal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61597 91177308-0d34-0410-b5e6-96231b3b80d8
promote from i1 all the way up to the canonical SetCC type.
In order to discover an appropriate type to use, pass
MVT::Other to getSetCCResultType. In order to be able to
do this, change getSetCCResultType to take a type as an
argument, not a value (this is also more logical).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61542 91177308-0d34-0410-b5e6-96231b3b80d8
instruction sequence and cannot ordinarily be simplified by DAGcombine
into the various target description files or SPUDAGToDAGISel.cpp.
This makes some 64-bit operations legal.
- Eliminate target-dependent ISD enums.
- Update tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61508 91177308-0d34-0410-b5e6-96231b3b80d8
DAGcombine's ability to find reasons to remove truncates when they were not
needed. Consequently, the CellSPU backend would produce correct, but _really
slow and horrible_, code.
Replaced with instruction sequences that do the equivalent truncation in
SPUInstrInfo.td.
- Re-examine how unaligned loads and stores work. Generated unaligned
load code has been tested on the CellSPU hardware; see the i32operations.c
and i64operations.c in CodeGen/CellSPU/useful-harnesses. (While they may be
toy test code, it does prove that some real world code does compile
correctly.)
- Fix truncating stores in bug 3193 (note: unpack_df.ll will still make llc
fault because i64 ult is not yet implemented.)
- Added i64 eq and neq for setcc and select/setcc; started new instruction
information file for them in SPU64InstrInfo.td. Additional i64 operations
should be added to this file and not to SPUInstrInfo.td.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61447 91177308-0d34-0410-b5e6-96231b3b80d8
constant shift count that doesn't fit in the shift instruction's
immediate field. This fixes PR3242.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61281 91177308-0d34-0410-b5e6-96231b3b80d8
172 %ECX<def> = MOV32rr %reg1039<kill>
180 INLINEASM <es:subl $5,$1
sbbl $3,$0>, 10, %EAX<def>, 14, %ECX<earlyclobber,def>, 9, %EAX<kill>,
36, <fi#0>, 1, %reg0, 0, 9, %ECX<kill>, 36, <fi#1>, 1, %reg0, 0
188 %EAX<def> = MOV32rr %EAX<kill>
196 %ECX<def> = MOV32rr %ECX<kill>
204 %ECX<def> = MOV32rr %ECX<kill>
212 %EAX<def> = MOV32rr %EAX<kill>
220 %EAX<def> = MOV32rr %EAX
228 %reg1039<def> = MOV32rr %ECX<kill>
The early clobber operand ties ECX input to the ECX def.
The live interval of ECX is represented as this:
%reg20,inf = [46,47:1)[174,230:0) 0@174-(230) 1@46-(47)
The right way to represent this is something like
%reg20,inf = [46,47:2)[174,182:1)[181:230:0) 0@174-(182) 1@181-230 @2@46-(47)
Of course that won't work since that means overlapping live ranges defined by two val#.
The workaround for now is to add a bit to val# which says the val# is redefined by a early clobber def somewhere. This prevents the move at 228 from being optimized away by SimpleRegisterCoalescing::AdjustCopiesBackFrom.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61259 91177308-0d34-0410-b5e6-96231b3b80d8
- Use SplitBlockPredecessors to factor out common predecessors of the critical edge destination. This is disabled for now due to some regressions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61248 91177308-0d34-0410-b5e6-96231b3b80d8
The EH_frame and .eh symbols are now private, except for darwin9 and earlier.
The patch also fixes the definition of PrivateGlobalPrefix on pcc linux.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61242 91177308-0d34-0410-b5e6-96231b3b80d8
DAGTypeLegalizer::ExpandShiftWithKnownAmountBit.
In terms of restoring the optimization, the best fix here isn't
obvious... any ideas?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61119 91177308-0d34-0410-b5e6-96231b3b80d8
computation code. Also, avoid adding output-depenency edges when both
defs are dead, which frequently happens with EFLAGS defs.
Compute Depth and Height lazily, and always in terms of edge latency
values. For the schedulers that don't care about latency, edge latencies
are set to 1.
Eliminate Cycle and CycleBound, and LatencyPriorityQueue's Latencies array.
These are all subsumed by the Depth and Height fields.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61073 91177308-0d34-0410-b5e6-96231b3b80d8
and insert vector element. Modified extract vector element to extend the
result to match the expected promoted type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61029 91177308-0d34-0410-b5e6-96231b3b80d8
