bytes instead of one byte. This is important because
we're running up to too many opcodes to fit in a byte
and it is aggrevated by FIRST_TARGET_MEMORY_OPCODE
making the numbering sparse. This just bites the
bullet and bloats out the table. In practice, this
increases the size of the x86 isel table from 74.5K
to 76K. I think we'll cope :)
This fixes rdar://7791648
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99494 91177308-0d34-0410-b5e6-96231b3b80d8
handles dead implicit results more aggressively. More
to come, I think this is now just a data entry problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99486 91177308-0d34-0410-b5e6-96231b3b80d8
happening.
Enhance scheduling to set the DEAD flag on implicit defs
more aggressively. Before, we'd set an implicit def operand
to dead if it were present in the SDNode corresponding to
the machineinstr but had no use. Now we do it in this case
AND if the implicit def does not exist in the SDNode at all.
This exposes a couple of problems: one is the FIXME, which
causes a live intervals crash on CodeGen/X86/sibcall.ll.
The second is that it makes machinecse and licm more
aggressive (which is a good thing) but also exposes a case
where licm hoists a set0 and then it doesn't get resunk.
Talking to codegen folks about both these issues, but I need
this patch in in the meantime.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99485 91177308-0d34-0410-b5e6-96231b3b80d8
Here is a theoretical example that illustrates why the placement is important.
tmp1 =
store tmp1 -> x
...
tmp2 = add ...
...
call
...
store tmp2 -> x
Now mem2reg comes along:
tmp1 =
dbg_value (tmp1 -> x)
...
tmp2 = add ...
...
call
...
dbg_value (tmp2 -> x)
When the debugger examine the value of x after the add instruction but before the call, it should have the value of tmp1.
Furthermore, for dbg_value's that reference constants, they should not be emitted at the beginning of the block (since they do not have "producers").
This patch also cleans up how SDISel manages DbgValue nodes. It allow a SDNode to be referenced by multiple SDDbgValue nodes. When a SDNode is deleted, it uses the information to find the SDDbgValues and invalidate them. They are not deleted until the corresponding SelectionDAG is destroyed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99469 91177308-0d34-0410-b5e6-96231b3b80d8
addl $12, %esp
popl %esi
popl %edi
popl %ebx
popl %ebp
jmpl *__Block_deallocator-L1$pb(%esi) # TAILCALL
The problem is the global base register is assigned GR32 register class. TCRETURNmi needs the registers making up the address mode to have the GR32_TC register class.
The *proper* fix is for X86DAGToDAGISel::getGlobalBaseReg() to return a copy from the global base register of the machine function rather than returning the register itself. But that has the potential of causing it to be coalesced to a more restrictive register class: GR32_TC. It can introduce additional copies and spills. For something as important the PIC base, it's not worth it especially since this is not an issue on 64-bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99455 91177308-0d34-0410-b5e6-96231b3b80d8
2006-07-19-stwbrx-crash.ll for me, but it's the only likely
patch in the blame list of several bots. Lets see if this
fixes it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99453 91177308-0d34-0410-b5e6-96231b3b80d8
--- Reverse-merging r99440 into '.':
U test/MC/AsmParser/X86/x86_32-bit_cat.s
U test/MC/AsmParser/X86/x86_32-encoding.s
U include/llvm/IntrinsicsX86.td
U include/llvm/CodeGen/SelectionDAGNodes.h
U lib/Target/X86/X86InstrSSE.td
U lib/Target/X86/X86ISelLowering.h
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99450 91177308-0d34-0410-b5e6-96231b3b80d8
not get an "Unknown immediate size" assert failure when used. All instructions
of this form have an 8-bit immediate. Also added a test case of an example
instruction that is of this form.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99435 91177308-0d34-0410-b5e6-96231b3b80d8
--- Reverse-merging r99400 into '.':
D test/CodeGen/Generic/2010-03-24-liveintervalleak.ll
U lib/CodeGen/LiveIntervalAnalysis.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99419 91177308-0d34-0410-b5e6-96231b3b80d8
otherwise the SmallVector it contains doesn't free its memory.
In most cases LiveIntervalAnalysis could get away by not calling the destructor,
because VNInfos are bumpptr-allocated, and smallvectors usually don't grow.
However when the SmallVector does grow it always leaks.
This is the valgrind shown leak from the original testcase:
==8206== 18,304 bytes in 151 blocks are definitely lost in loss record 164 of 164
==8206== at 0x4A079C7: operator new(unsigned long) (vg_replace_malloc.c:220)
==8206== by 0x4DB7A7E: llvm::SmallVectorBase::grow_pod(unsigned long, unsigned long) (in /home/edwin/clam/git/builds/defaul
t/libclamav/.libs/libclamav.so.6.1.0)
==8206== by 0x4F90382: llvm::VNInfo::addKill(llvm::SlotIndex) (in /home/edwin/clam/git/builds/default/libclamav/.libs/libcl
amav.so.6.1.0)
==8206== by 0x5126B5C: llvm::LiveIntervals::handleVirtualRegisterDef(llvm::MachineBasicBlock*, llvm::ilist_iterator<llvm::M
achineInstr>, llvm::SlotIndex, llvm::MachineOperand&, unsigned int, llvm::LiveInterval&) (in /home/edwin/clam/git/builds/defau
lt/libclamav/.libs/libclamav.so.6.1.0)
==8206== by 0x512725E: llvm::LiveIntervals::handleRegisterDef(llvm::MachineBasicBlock*, llvm::ilist_iterator<llvm::MachineI
nstr>, llvm::SlotIndex, llvm::MachineOperand&, unsigned int) (in /home/edwin/clam/git/builds/default/libclamav/.libs/libclamav
.so.6.1.0)
==8206== by 0x51278A8: llvm::LiveIntervals::computeIntervals() (in /home/edwin/clam/git/builds/default/libclamav/.libs/libc
lamav.so.6.1.0)
==8206== by 0x5127CB4: llvm::LiveIntervals::runOnMachineFunction(llvm::MachineFunction&) (in /home/edwin/clam/git/builds/de
fault/libclamav/.libs/libclamav.so.6.1.0)
==8206== by 0x4DAE935: llvm::FPPassManager::runOnFunction(llvm::Function&) (in /home/edwin/clam/git/builds/default/libclama
v/.libs/libclamav.so.6.1.0)
==8206== by 0x4DAEB10: llvm::FunctionPassManagerImpl::run(llvm::Function&) (in /home/edwin/clam/git/builds/default/libclama
v/.libs/libclamav.so.6.1.0)
==8206== by 0x4DAED3D: llvm::FunctionPassManager::run(llvm::Function&) (in /home/edwin/clam/git/builds/default/libclamav/.l
ibs/libclamav.so.6.1.0)
==8206== by 0x4D8BE8E: llvm::JIT::runJITOnFunctionUnlocked(llvm::Function*, llvm::MutexGuard const&) (in /home/edwin/clam/git/builds/default/libclamav/.libs/libclamav.so.6.1.0)
==8206== by 0x4D8CA72: llvm::JIT::getPointerToFunction(llvm::Function*) (in /home/edwin/clam/git/builds/default/libclamav/.libs/libclamav.so.6.1.0)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99400 91177308-0d34-0410-b5e6-96231b3b80d8
I have audited all getOperandNo calls now, fixing
hidden assumptions. CallSite related uglyness will
be eliminated successively.
Note this patch has a long and griveous history,
for all the back-and-forths have a look at
CallSite.h's log.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99399 91177308-0d34-0410-b5e6-96231b3b80d8
ISD node. The only change in the generated isel code are comments
like:
< // Src: (X86dec_flag:i16 GR16:i16:$src)
---
> // Src: (X86dec_flag:i16:i32 GR16:i16:$src)
because now it knows that X86dec_flag returns both an i16 (for the result)
and an i32 (for EFLAGS) in this case. Wewt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99369 91177308-0d34-0410-b5e6-96231b3b80d8
This is work in progress. So far, SSE execution domain tables are added to
X86InstrInfo, and a skeleton pass is enabled with -sse-domain-fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99345 91177308-0d34-0410-b5e6-96231b3b80d8
for the noinline attribute, and make the inliner refuse to
inline a call site when the call site is marked noinline even
if the callee isn't. This fixes PR6682.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99341 91177308-0d34-0410-b5e6-96231b3b80d8
for ignoring debug info intrinsics everywhere else is to advance
past them, and it needs to be consistent.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99332 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions are only needed for codegen, so I've removed all the
explicit encoding bits for now; they should be set in the same way as the for
VLDMD and VSTMD whenever we add encodings for VFP. The use of addrmode5
requires that the instructions be custom-selected so that the number of
registers can be set in the AM5Opc value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99309 91177308-0d34-0410-b5e6-96231b3b80d8
of D registers. Add a separate VST1q instruction with a Q register
source operand for use by storeRegToStackSlot.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99265 91177308-0d34-0410-b5e6-96231b3b80d8
of D registers. Add a separate VLD1q instruction with a Q register
destination operand for use by loadRegFromStackSlot.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99261 91177308-0d34-0410-b5e6-96231b3b80d8
