Constant pool entries are uniqued by their contents regardless of their
type. This means that a pshufb can have a shuffle mask which isn't a
simple array of bytes.
The code path which attempts to decode the mask didn't check for
failure, causing PR22559.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228979 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Implement the bulk of returning values in Mips fast-isel
Test Plan:
reatabi.ll
Passes test-suite at -O0,-O2 and with mips32r2 and mips32r1.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits, aemerson, rfuhler
Differential Revision: http://reviews.llvm.org/D5920
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228958 91177308-0d34-0410-b5e6-96231b3b80d8
The changes in r223113 (ARM modified-immediate syntax) have broken
instructions like:
mov r0, #~0xffffff00
The problem is that I've added a spurious range check on the immediate
operand to ensure that it lies between INT32_MIN and UINT32_MAX. While
this range check is correct in theory, it causes problems because the
operand is stored in an int64_t (by MC). So valid 32-bit constants like
\#~0xffffff00 become out of range. The solution is to simply remove this
range check. It is not possible to validate the range of the immediate
operand with the current setup because: 1) The operand is stored in an
int64_t by MC, 2) The immediate can be of the forms #imm, #-imm, #~imm
or even #((~imm)) etc. So we just chop the value to 32 bits and use it.
Also noted that the original range check was note tested by any of the
unit tests. I've added a new test to cover #~imm kind of operands.
Change-Id: I411e90d84312a2eff01b732bb238af536c4a7599
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228920 91177308-0d34-0410-b5e6-96231b3b80d8
Using KORTESTW for comparison i1 value with zero was wrong since the instruction tests 16 bits.
KORTESTW may be used with KSHIFTL+KSHIFTR that clean the 15 upper bits.
I removed (X86cmp i1, 0) pattern and zero-extend i1 to i8 and then use TESTB.
There are some cases where i1 is in the mask register and the upper bits are already zeroed.
Then KORTESTW is the better solution, but it is subject for optimization.
Meanwhile, I'm fixing the correctness issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228916 91177308-0d34-0410-b5e6-96231b3b80d8
This gives a rough estimate of whether using pushes instead of movs is profitable, in terms of size.
We go over all calls in the MachineFunction and compute:
a) For each callsite that can not use pushes, the penalty of not having a reserved call frame.
b) For each callsite that can use pushes, the gain of actually replacing the movs with pushes (and the potential penalty of having to readjust the stack).
Differential Revision: http://reviews.llvm.org/D7561
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228915 91177308-0d34-0410-b5e6-96231b3b80d8
On PowerPC, which has a full set of logical operations on (its multiple sets
of) condition-register bits, it is not profitable to break of complex
conditions feeding a jump into multiple jumps. We can turn off this feature of
CGP/SDAGBuilder by marking jumps as "expensive".
P7 test-suite speedups (no regressions):
MultiSource/Benchmarks/FreeBench/pcompress2/pcompress2
-0.626647% +/- 0.323583%
MultiSource/Benchmarks/Olden/power/power
-18.2821% +/- 8.06481%
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228895 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Currently we have Mips32 and Mips64 disassemblers and this causes the target
triple to affect the disassembly despite all the relevant information being in
the ELF header. These implementations do not need to be separate.
This patch merges them together such that the appropriate tables are checked
for the subtarget (e.g. Mips64 is checked when GP64 is enabled).
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7498
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228825 91177308-0d34-0410-b5e6-96231b3b80d8
The NodeMetadata are maintained in an incremental way. When an edge between
2 nodes has its cost updated, in the course of graph reduction for example,
the NodeMetadata need first to have the old edge cost removed, then the new
edge cost added. Only once the NodeMetadata have been fully updated, it
becomes safe to consider promoting the nodes to the
ConservativelyAllocatable or OptimallyReducible sets. Previously, this
promotion was occuring right after the removing the old cost, and this was
breaking the assumption that a ConservativelyAllocatable should not be
spilled.
This patch also adds asserts to:
- enforces the invariant that a node's reduction can not be downgraded,
- only not provably allocatable or optimally reducible nodes can be spilled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228816 91177308-0d34-0410-b5e6-96231b3b80d8
Simply loading or storing the frame pointer is not sufficient for
Windows targets. Instead, create a synthetic frame object that we will
lower later. References to this synthetic object will be replaced with
the correct reference to the frame address.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228748 91177308-0d34-0410-b5e6-96231b3b80d8
See full discussion in http://reviews.llvm.org/D7491.
We now hide the add-immediate and call instructions together in a
separate pseudo-op, which is tagged to define GPR3 and clobber the
call-killed registers. The PPCTLSDynamicCall pass prior to RA now
expands this op into the two separate addi and call ops, with explicit
definitions of GPR3 on both instructions, and explicit clobbers on the
call instruction. The pass is now marked as requiring and preserving
the LiveIntervals and SlotIndexes analyses, and fixes these up after
the replacement sequences are introduced.
Self-hosting has been verified on LE P8 and BE P7 with various
optimization levels, etc. It has also been verified with the
--no-tls-optimize flag workaround removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228725 91177308-0d34-0410-b5e6-96231b3b80d8
Some old assembly code uses the cntlz alias for cntlzw, binutils supports this,
and we should too. Fixes PR22519.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228719 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds the complete AMD Bulldozer XOP instruction set to the memory folding pattern tables for stack folding, etc.
Note: Many of the XOP instructions have multiple table entries as it can fold loads from different sources.
Differential Revision: http://reviews.llvm.org/D7484
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228685 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches X86FastISel how to select AVX instructions for scalar
float/double convert operations.
Before this patch, X86FastISel always selected legacy SSE instructions
for FPExt (from float to double) and FPTrunc (from double to float).
For example:
\code
define double @foo(float %f) {
%conv = fpext float %f to double
ret double %conv
}
\end code
Before (with -mattr=+avx -fast-isel) X86FastIsel selected a CVTSS2SDrr which is
legacy SSE:
cvtss2sd %xmm0, %xmm0
With this patch, X86FastIsel selects a VCVTSS2SDrr instead:
vcvtss2sd %xmm0, %xmm0, %xmm0
Added test fast-isel-fptrunc-fpext.ll to check both the register-register and
the register-memory float/double conversion variants.
Differential Revision: http://reviews.llvm.org/D7438
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228682 91177308-0d34-0410-b5e6-96231b3b80d8
Win64 has specific contraints on what valid prologues and epilogues look
like. This constraint is born from the flexibility and descriptiveness
of Win64's unwind opcodes.
Prologues previously emitted by LLVM could not be represented by the
unwind opcodes, preventing operations powered by stack unwinding to
successfully work.
Differential Revision: http://reviews.llvm.org/D7520
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228641 91177308-0d34-0410-b5e6-96231b3b80d8
