The AAPCS treats small structs and homogeneous floating (or vector) aggregates
specially, and guarantees they either get passed as a contiguous block of
registers, or prevent any future use of those registers and get passed on the
stack.
This concept can fit quite neatly into LLVM's own type system, mapping an HFA
to [N x float] and so on, and small structs to [N x i64]. Doing so allows
front-ends to emit AAPCS compliant code without having to duplicate the
register counting logic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222903 91177308-0d34-0410-b5e6-96231b3b80d8
The current 8 bits is sufficient for ELF32 targets but ELF64 requires
32 bits. Add a test for AArch64 that exposes the issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222898 91177308-0d34-0410-b5e6-96231b3b80d8
I also added a test.
Original message:
Allow FDE references outside the +/-2GB range supported by PC relative
offsets for code models other than small/medium. For JIT application,
memory layout is less controlled and can result in truncations
otherwise.
Patch from Akos Kiss.
Differential Revision: http://reviews.llvm.org/D6079
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222897 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r222760.
It changed our behaviour on PIC so we don't match gas anymore. It also
included lots of unnecessary changes to tests.
If those changes are desirable, there should be an independent discussion
as they are out of scope for that patch.
I will recommit the other bits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222896 91177308-0d34-0410-b5e6-96231b3b80d8
Fixed missing dominance check.
Original commit message:
This optimization tries to reuse the generated compare instruction, if there is a comparison against the default value after the switch.
Example:
if (idx < tablesize)
r = table[idx]; // table does not contain default_value
else
r = default_value;
if (r != default_value)
...
Is optimized to:
cond = idx < tablesize;
if (cond)
r = table[idx];
else
r = default_value;
if (cond)
...
Jump threading will then eliminate the second if(cond).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222891 91177308-0d34-0410-b5e6-96231b3b80d8
The string data for string-valued build attributes were being unconditionally
uppercased. There is no mention in the ARM ABI addenda about case conventions,
so it's technically implementation defined as to whether the data are
capitialised in some way or not. However, there are good reasons not to
captialise the data.
* It's less work.
* Some vendors may legitimately have case-sensitive checks for these
attributes which would fail on LLVM generated object files.
* There could be locale issues with uppercasing.
The original reasons for uppercasing appear to have stemmed from an
old codesourcery toolchain behaviour, see
http://comments.gmane.org/gmane.comp.compilers.llvm.cvs/87133
This patch makes the object file emitted no longer captialise string
data, it encodes as seen in the assembly source.
Change-Id: Ibe20dd6e60d2773d57ff72a78470839033aa5538
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222882 91177308-0d34-0410-b5e6-96231b3b80d8
This optimization tries to reuse the generated compare instruction, if there is a comparison against the default value after the switch.
Example:
if (idx < tablesize)
r = table[idx]; // table does not contain default_value
else
r = default_value;
if (r != default_value)
...
Is optimized to:
cond = idx < tablesize;
if (cond)
r = table[idx];
else
r = default_value;
if (cond)
...
\endcode
Jump threading will then eliminate the second if(cond).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222872 91177308-0d34-0410-b5e6-96231b3b80d8
This restores our ability to optimize:
(X & C) == 0 ? X ^ C : X into X | C
(X & C) != 0 ? X ^ C : X into X & ~C
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222871 91177308-0d34-0410-b5e6-96231b3b80d8
This restores our ability to optimize:
(X & C) ? X & ~C : X into X & ~C
(X & C) ? X : X & ~C into X
(X & C) ? X | C : X into X
(X & C) ? X : X | C into X | C
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222868 91177308-0d34-0410-b5e6-96231b3b80d8
All symbols have to be stored in the global symbol to enable
cross-rtdyld-instance linking, so the local symbol table content is
redundant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222867 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r210006, it miscompiled libapr which is used in who
knows how many projects.
A test has been added to ensure that we don't regress again.
I'll work on a rewrite of what the optimization was trying to do later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222856 91177308-0d34-0410-b5e6-96231b3b80d8
llvm-objdump printed out an error message for this off-by-one error,
but because it always exits with 0 whether or not it found an error,
the test (llvm-objdump/coff-many-relocs.test) succeeded.
I made llvm-objdump exit with EXIT_FAILURE when an error is found.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222852 91177308-0d34-0410-b5e6-96231b3b80d8
This sort of doesn't matter since the setcc type is i1, but
this previously was using the default UndefinedBooleanContent. This
makes it more consistent with R600. This enables more optimizations
which typically give up on UndefinedBooleanContent. For example,
there is already a special case target DAG combine for
setcc + sext which can be eliminated in favor of what the generic
DAG combiner can do if it assumes boolean values are sign extended.
Since -1 is an inline immediate, using it is basically free and the
backend already uses it when a boolean value is needed in a wider type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222850 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes moving boolean constants into registers before operating
on them. They get permuted and shrunk down to e32 anyway later. This
is a temporary fix until the patch that removes these pseudos is
committed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222844 91177308-0d34-0410-b5e6-96231b3b80d8
This mostly entails adding relocations, however there are a couple of
changes to existing relocations:
1. R_AARCH64_NONE is defined to be zero rather than 256
R_AARCH64_NONE has been defined to be zero for a long time elsewhere
e.g. binutils and glibc since the submission of the AArch64 port in
2012 so this is required for compatibility.
2. R_AARCH64_TLSDESC_ADR_PAGE renamed to R_AARCH64_TLSDESC_ADR_PAGE21
I don't think there is any way for relocation names to leak out of LLVM
so this should not break anything.
Tested with check-all with no regressions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222821 91177308-0d34-0410-b5e6-96231b3b80d8
including SAE mode and memory operand.
Added AVX512_maskable_scalar template, that should cover all scalar instructions in the future.
The main difference between AVX512_maskable_scalar<> and AVX512_maskable<> is using X86select instead of vselect.
I need it, because I can't create vselect node for MVT::i1 mask for scalar instruction.
http://reviews.llvm.org/D6378
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222820 91177308-0d34-0410-b5e6-96231b3b80d8
that we actually have an object to register first.
For MachO objects, RuntimeDyld::LoadedObjectInfo::getObjectForDebug returns an
empty OwningBinary<ObjectFile> which was causing crashes in the GDB registration
code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222812 91177308-0d34-0410-b5e6-96231b3b80d8
The RuntimeDyld cleanup patch r222810 turned on GDB registration for MachO
objects. I expected this to be harmless, but it seems to have broken on
MacsOS. Temporarily disabling debugger registration while I dig in to what's
gone wrong.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222811 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, when loading an object file, RuntimeDyld (1) took ownership of the
ObjectFile instance (and associated MemoryBuffer), (2) potentially modified the
object in-place, and (3) returned an ObjectImage that managed ownership of the
now-modified object and provided some convenience methods. This scheme accreted
over several years as features were tacked on to RuntimeDyld, and was both
unintuitive and unsafe (See e.g. http://llvm.org/PR20722).
This patch fixes the issue by removing all ownership and in-place modification
of object files from RuntimeDyld. Existing behavior, including debugger
registration, is preserved.
Noteworthy changes include:
(1) ObjectFile instances are now passed to RuntimeDyld by const-ref.
(2) The ObjectImage and ObjectBuffer classes have been removed entirely, they
existed to model ownership within RuntimeDyld, and so are no longer needed.
(3) RuntimeDyld::loadObject now returns an instance of a new class,
RuntimeDyld::LoadedObjectInfo, which can be used to construct a modified
object suitable for registration with the debugger, following the existing
debugger registration scheme.
(4) The JITRegistrar class has been removed, and the GDBRegistrar class has been
re-written as a JITEventListener.
This should fix http://llvm.org/PR20722 .
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222810 91177308-0d34-0410-b5e6-96231b3b80d8
