The register allocator, when it allocates a register to a virtual register defined by an implicit_def, can allocate any physical register without worrying about overlapping live ranges. It should mark all of operands of the said virtual register so later passes will do the right thing.
This is not the best solution. But it should be a lot less fragile to having the scavenger try to track what is defined by implicit_def.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74518 91177308-0d34-0410-b5e6-96231b3b80d8
an individual exhaustive evaluation reflects only the exit value
implied by an individual exit, which may differ from the actual
exit value of the loop if there are other exits. This fixes PR4477.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74447 91177308-0d34-0410-b5e6-96231b3b80d8
Not sure I understand how the temp register gets used,
but this fixes a bug and introduces no regressions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74446 91177308-0d34-0410-b5e6-96231b3b80d8
After much back and forth, I decided to deviate from ARM design and split LDR into 4 instructions (r + imm12, r + imm8, r + r << imm12, constantpool). The advantage of this is 1) it follows the latest ARM technical manual, and 2) makes it easier to reduce the width of the instruction later. The down side is this creates more inconsistency between the two sub-targets. We should split ARM LDR instruction in a similar fashion later. I've added a README entry for this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74420 91177308-0d34-0410-b5e6-96231b3b80d8
when one of them can be converted to a trivial icmp and conditional
branch.
This addresses what is essentially a phase ordering problem.
SimplifyCFG knows how to do this transformation, but it doesn't do so
if the primary block has any instructions in it other than an icmp and
a branch. In the given testcase, the block contains other instructions,
however they are loop-invariant and can be hoisted. SimplifyCFG doesn't
have LoopInfo though, so it can't hoist them. And, it's important that
the blocks be merged before LoopRotation, as it doesn't support
multiple-exit loops.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74396 91177308-0d34-0410-b5e6-96231b3b80d8
inserted to replace that value must dominate all of of the basic
blocks associated with the uses of the value in the PHI, not just
one of them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74376 91177308-0d34-0410-b5e6-96231b3b80d8
implementation primarily differs from the former in that the asmprinter
doesn't make a zillion decisions about whether or not something will be
RIP relative or not. Instead, those decisions are made by isel lowering
and propagated through to the asm printer. To achieve this, we:
1. Represent RIP relative addresses by setting the base of the X86 addr
mode to X86::RIP.
2. When ISel Lowering decides that it is safe to use RIP, it lowers to
X86ISD::WrapperRIP. When it is unsafe to use RIP, it lowers to
X86ISD::Wrapper as before.
3. This removes isRIPRel from X86ISelAddressMode, representing it with
a basereg of RIP instead.
4. The addressing mode matching logic in isel is greatly simplified.
5. The asmprinter is greatly simplified, notably the "NotRIPRel" predicate
passed through various printoperand routines is gone now.
6. The various symbol printing routines in asmprinter now no longer infer
when to emit (%rip), they just print the symbol.
I think this is a big improvement over the previous situation. It does have
two small caveats though: 1. I implemented a horrible "no-rip" modifier for
the inline asm "P" constraint modifier. This is a short term hack, there is
a much better, but more involved, solution. 2. I had to xfail an
-aggressive-remat testcase because it isn't handling the use of RIP in the
constant-pool reading instruction. This specific test is easy to fix without
-aggressive-remat, which I intend to do next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74372 91177308-0d34-0410-b5e6-96231b3b80d8
Also, added a pattern for the thumb-2 MOV of shifted immediate since that can encode immediates not encodable by the 16-bit immediate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74288 91177308-0d34-0410-b5e6-96231b3b80d8
test suite. Remove documentation for --with-f2c, which
is no longer supported. Remove information about obtaining
tcl/expect, which ship with Mac OS X by default since
10.4.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74271 91177308-0d34-0410-b5e6-96231b3b80d8
- Includes some DG tests in test/MC/AsmParser, which are rather primitive since
we don't have a -verify mode yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74139 91177308-0d34-0410-b5e6-96231b3b80d8
computations in loops with multiple exits.
Adjust the testcase for PR4436 so that the relevant portion isn't
optimized away.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74073 91177308-0d34-0410-b5e6-96231b3b80d8
terminator, instead of after the last phi. This fixes a bug
exposed by ScalarEvolution analyzing more kinds of loops.
This fixes PR4436.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74072 91177308-0d34-0410-b5e6-96231b3b80d8
trip counts in more cases.
Generalize ScalarEvolution's isLoopGuardedByCond code to recognize
And and Or conditions, splitting the code out into an
isNecessaryCond helper function so that it can evaluate Ands and Ors
recursively, and make SCEVExpander be much more aggressive about
hoisting instructions out of loops.
test/CodeGen/X86/pr3495.ll has an additional instruction now, but
it appears to be due to an arbitrary register allocation difference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74048 91177308-0d34-0410-b5e6-96231b3b80d8
generating LLVM IR; it is correct in the code as written
to use 8-byte-aligned operations to copy Key in bar. Formerly
the gcc inliner was run, now it isn't. I don't think it's
possible to preserve this as a pure FE test. Adding -O2 lets
the llvm optimizers get rid of the 8-byte-aligned stores, at least.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73981 91177308-0d34-0410-b5e6-96231b3b80d8
generated code was apparently doing stores directly into the return value
aggregate; now, it's doing a copy from a compiler-generated static object.
That object is initialized using [4 x i8] which breaks the test. I believe
this change preserves the original point of the test.
Of course it would be better for the code to do stores directly into the
return aggregate, but that is not what happens at -O0; the llvm optimizers
seem to do that on x86 but not on ppc32, possibly because of the explicit
padding (which is unavoidable). I think it must have been being done by
a gcc optimizer pass before.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73972 91177308-0d34-0410-b5e6-96231b3b80d8
std::pair<double, float*>
is 16 bytes on darwin-powerpc, but not always.
See testcase for full weirdness.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73874 91177308-0d34-0410-b5e6-96231b3b80d8
blocks, and also exit blocks with multiple conditions (combined
with (bitwise) ands and ors). It's often infeasible to compute an
exact trip count in such cases, but a useful upper bound can often
be found.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73866 91177308-0d34-0410-b5e6-96231b3b80d8
a global with that gets printed with the :mem modifier. All operands to lea's
should be handled with the lea32mem operand kind, and this allows the TLS stuff
to do this. There are several better ways to do this, but I went for the minimal
change since I can't really test this (beyond make check).
This also makes the use of EBX explicit in the operand list in the 32-bit,
instead of implicit in the instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73834 91177308-0d34-0410-b5e6-96231b3b80d8
SCEVUnknowns with identical Instructions to be equal. This allows
it to analze cases such as the attached testcase, where the front-end
has cloned the loop controlling expression. Along with r73805, this
lets IndVarSimplify eliminate all the sign-extend casts in the
loop in the attached testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73807 91177308-0d34-0410-b5e6-96231b3b80d8
expression in IVUsers, because in the case of a use of a non-linear
addrec outside of a loop, this causes the addrec to be evaluated as
a linear addrec.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73774 91177308-0d34-0410-b5e6-96231b3b80d8
as if they were multiple uses of the same instruction. This interacts
well with the existing loadpre that j-t does to open up many new jump
threads earlier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73768 91177308-0d34-0410-b5e6-96231b3b80d8
while experimenting. I'm reasonably sure this is correct, but please
tell me if these instructions have some strange property which makes this
change unsafe.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73746 91177308-0d34-0410-b5e6-96231b3b80d8
as signed max tests. Along with r73717, this helps CodeGen avoid
emitting code for a maximum operation for this class of loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73718 91177308-0d34-0410-b5e6-96231b3b80d8
casted induction variables in cases where the cast
isn't foldable. It ended up being a pessimization in
many cases. This could be fixed, but it would require
a bunch of complicated code in IVUsers' clients. The
advantages of this approach aren't visible enough to
justify it at this time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73706 91177308-0d34-0410-b5e6-96231b3b80d8