to TargetFrameLowering, where it belongs. Incidentally, this allows us
to delete some duplicated (and slightly different!) code in TRI.
There are potentially other layering problems that can be cleaned up
as a result, or in a similar manner.
The refactoring was OK'd by Anton Korobeynikov on llvmdev.
Note: this touches the target interfaces, so out-of-tree targets may
be affected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175788 91177308-0d34-0410-b5e6-96231b3b80d8
there were inline br .+4 instructions. Soon everything can enjoy the
full instruction scheduling experience.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175718 91177308-0d34-0410-b5e6-96231b3b80d8
The constructs %hi() and %lo() represent the high and low 16
bits of the address.
Because the 16 bit offset field of an LW instruction is
interpreted as signed, if bit 15 of the low part is 1 then the
low part will act as a negative and 1 needs to be added to the
high part.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175707 91177308-0d34-0410-b5e6-96231b3b80d8
excluding visibility bits.
Mips specific standalone assembler directive "set at".
This directive changes the general purpose register
that the assembler will use when given the symbolic
register name $at.
This does not include negative testing. That will come
in a future patch.
A side affect of this patch recognizes the different
GPR register names for temporaries between old abi
and new abi so a test case for that is included.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175686 91177308-0d34-0410-b5e6-96231b3b80d8
SltCCRxRy16, SltiCCRxImmX16, SltiuCCRxImmX16, SltuCCRxRy16
$T8 shows up as register $24 when emitted from C++ code so we had
to change some tests that were already there for this functionality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175593 91177308-0d34-0410-b5e6-96231b3b80d8
excluding visibility bits.
Mips (o32 abi) specific e_header setting.
EF_MIPS_ABI_O32 needs to be set in the
ELF header flags for o32 abi output.
Contributer: Reed Kotler
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175569 91177308-0d34-0410-b5e6-96231b3b80d8
excluding visibility bits.
Mips (Mips16) specific e_header setting.
EF_MIPS_ARCH_ASE_M16 needs to be set in the
ELF header flags for Mips16.
Contributer: Reed Kotler
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175566 91177308-0d34-0410-b5e6-96231b3b80d8
excluding visibility bits.
Mips (MicroMips) specific STO handling .
The st_other field settig for STO_MIPS_MICROMIPS
Contributer: Zoran Jovanovic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175564 91177308-0d34-0410-b5e6-96231b3b80d8
at this time, llvm is generating a different but equivalent pattern
that would lead to this instruction. I am trying to think of a way
to get it to generate this. If I can't, I may just remove the pseudo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175419 91177308-0d34-0410-b5e6-96231b3b80d8
This expansion will be moved to expandISelPseudos as soon as I can figure
out how to do that. There are other instructions which use this
ExpandFEXT_T8I816_ins and as soon as I have finished expanding them all,
I will delete the macro asm string text so it has no way to be used
in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175413 91177308-0d34-0410-b5e6-96231b3b80d8
as well as 16/32 bit variants to do and so I want this to look nice
when I do it. I've been experimenting with this. No new test cases
are needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175369 91177308-0d34-0410-b5e6-96231b3b80d8
functions. Set AddedComplexity to determine the order in which patterns are
matched.
This simplifies selection of floating point loads/stores.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175300 91177308-0d34-0410-b5e6-96231b3b80d8
of the old jit and which we don't intend to support in mips16 or micromips.
This dependency is for the testing of whether an instruction is a pseudo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175297 91177308-0d34-0410-b5e6-96231b3b80d8
not matter but makes it more gcc compatible which avoids possible subtle
problems. Also, turned back on a disabled check in helloworld.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175237 91177308-0d34-0410-b5e6-96231b3b80d8
Unfortunately, I wasn't able to create a test case that demonstrates the
problem I was trying to fix with this patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175226 91177308-0d34-0410-b5e6-96231b3b80d8
1. Define and use function terminateSearch.
2. Use MachineBasicBlock::iterator instead of MachineBasicBlock::instr_iterator.
3. Delete the line which checks whether an instruction is a pseudo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175219 91177308-0d34-0410-b5e6-96231b3b80d8
up so that we can apply the direct object emitter patch. This patch
should be a nop right now and it's test is to not break what is already
there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175126 91177308-0d34-0410-b5e6-96231b3b80d8
if the offset fits in 11 bits. This makes use of the fact that the abi
requires sp to be 8 byte aligned so the actual offset can fit in 8
bits. It will be shifted left and sign extended before being actually used.
The assembler or direct object emitter will shift right the 11 bit
signed field by 3 bits. We don't need to deal with that here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175073 91177308-0d34-0410-b5e6-96231b3b80d8
MipsCodeEmitter.cpp.
JALR and NOP are expanded by function emitPseudoExpansionLowering, which is not
called when the old JIT is used.
This fixes the following tests which have been failing on
llvm-mips-linux builder:
LLVM :: ExecutionEngine__2003-01-04-LoopTest.ll
LLVM :: ExecutionEngine__2003-05-06-LivenessClobber.ll
LLVM :: ExecutionEngine__2003-06-04-bzip2-bug.ll
LLVM :: ExecutionEngine__2005-12-02-TailCallBug.ll
LLVM :: ExecutionEngine__2003-10-18-PHINode-ConstantExpr-CondCode-Failure.ll
LLVM :: ExecutionEngine__hello2.ll
LLVM :: ExecutionEngine__stubs.ll
LLVM :: ExecutionEngine__test-branch.ll
LLVM :: ExecutionEngine__test-call.ll
LLVM :: ExecutionEngine__test-common-symbols.ll
LLVM :: ExecutionEngine__test-loadstore.ll
LLVM :: ExecutionEngine__test-loop.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174912 91177308-0d34-0410-b5e6-96231b3b80d8
same so we put in the comment field an indicator when we think we are
emitting the 16 bit version. For the direct object emitter, the difference is
important as well as for other passes which need an accurate count of
program size. There will be other similar putbacks to this for various
instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174747 91177308-0d34-0410-b5e6-96231b3b80d8
allowed size for the instruction. This code uses RegScavenger to fix this.
We sometimes need 2 registers for Mips16 so we must handle things
differently than how register scavenger is normally used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174696 91177308-0d34-0410-b5e6-96231b3b80d8
