prefix byte problem as in r104062.
- As a total hack to keep the TAILCALL markers in the output, which some tests depend on, this invents a new TAILJMP_1 instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104120 91177308-0d34-0410-b5e6-96231b3b80d8
opcodes into a helper function. This fixes a few places in the code
which were not properly selecting the 8-bit-immediate opcodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104091 91177308-0d34-0410-b5e6-96231b3b80d8
The register use operands (e.g. the first argument is passed in a
register) is currently being modeled as a normal register use,
instead of correctly being an implicit use. This causes the operand
to get propagated onto the mcinst, which was causing the encoder to
emit a rex prefix byte, which generates an invalid call.
This fixes rdar://7998435
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104062 91177308-0d34-0410-b5e6-96231b3b80d8
too large limit.
The function would return immediately when finding an addrmode 3/5 instruction.
It needs to keep scanning in case there is an addrmode 6 instruction which drops
the limit to 0.
A test case is very difficult to produce because it will only fail when the
scavenger is used.
rdar://problem/7894847
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103995 91177308-0d34-0410-b5e6-96231b3b80d8
- Change the logic DisableFramePointerElim() to check for the
-disable-non-leaf-fp-elim before -disable-fp-elim.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103990 91177308-0d34-0410-b5e6-96231b3b80d8
- Of questionable utility, since in general anything which wants to do this should probably be within a target specific hook, which can rely on the sections being of the appropriate type. However, it can be useful for short term hacks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103980 91177308-0d34-0410-b5e6-96231b3b80d8
<1xi64> -> i64 to work in MMX registers on hosts where -no-sse
is the default (not mine). The right thing is
to accept this and make i64->f64 conversions go through memory,
but I don't have time right now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103914 91177308-0d34-0410-b5e6-96231b3b80d8
(This worked as of about 6 months ago and I didn't track down
exactly what broke it; I think this fix is appropriate.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103911 91177308-0d34-0410-b5e6-96231b3b80d8
The implementation in LegalizeIntegerTypes to handle this as
sint64->float + appropriate power of 2 is subject to double rounding,
considered incorrect by numerics people. Use this implementation only
when it is safe. This leads to using library calls in some cases
that produced inline code before, but it's correct now.
(EVTToAPFloatSemantics belongs somewhere else, any suggestions?)
Add a correctly rounding (though not particularly fast) conversion
that uses X87 80-bit computations for x86-32.
7885399, 5901940. This shows up in gcc.c-torture/execute/ieee/rbug.c
in the gcc testsuite on some platforms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103883 91177308-0d34-0410-b5e6-96231b3b80d8
allow target to override it in order to map register classes to illegal
but synthesizable types. e.g. v4i64, v8i64 for ARM / NEON.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103854 91177308-0d34-0410-b5e6-96231b3b80d8
instructions.
e.g.
%reg1026<def> = VLDMQ %reg1025<kill>, 260, pred:14, pred:%reg0
%reg1027<def> = EXTRACT_SUBREG %reg1026, 6
%reg1028<def> = EXTRACT_SUBREG %reg1026<kill>, 5
...
%reg1029<def> = REG_SEQUENCE %reg1028<kill>, 5, %reg1027<kill>, 6, %reg1028, 7, %reg1027, 8, %reg1028, 9, %reg1027, 10, %reg1030<kill>, 11, %reg1032<kill>, 12
After REG_SEQUENCE is eliminated, we are left with:
%reg1026<def> = VLDMQ %reg1025<kill>, 260, pred:14, pred:%reg0
%reg1029:6<def> = EXTRACT_SUBREG %reg1026, 6
%reg1029:5<def> = EXTRACT_SUBREG %reg1026<kill>, 5
The regular coalescer will not be able to coalesce reg1026 and reg1029 because it doesn't
know how to combine sub-register indices 5 and 6. Now 2-address pass will consult the
target whether sub-registers 5 and 6 of reg1026 can be combined to into a larger
sub-register (or combined to be reg1026 itself as is the case here). If it is possible,
it will be able to replace references of reg1026 with reg1029 + the larger sub-register
index.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103835 91177308-0d34-0410-b5e6-96231b3b80d8
replace the check with the appropriate predicate. Modify the testcase to reflect
the correct code. (It should be saving callee-saved registers on the stack
allocated by the calling fuction.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103829 91177308-0d34-0410-b5e6-96231b3b80d8
of "has calls". That's probably wrong, but it needs further
investigation. Revert to the original behavior until this is settled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103824 91177308-0d34-0410-b5e6-96231b3b80d8
the variable actually tracks.
N.B., several back-ends are using "HasCalls" as being synonymous for something
that adjusts the stack. This isn't 100% correct and should be looked into.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103802 91177308-0d34-0410-b5e6-96231b3b80d8
used more than once. If ISel had put a kill flag on one of them,
it's not valid to transfer the kill flag to each new instance.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103799 91177308-0d34-0410-b5e6-96231b3b80d8
lower them to the correct x86-64 instructions since we
don't have a clean way to handle this in td files yet.
rdar://7947184
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103668 91177308-0d34-0410-b5e6-96231b3b80d8
v1024 = REG_SEQUENCE ...
v1025 = EXTRACT_SUBREG v1024, 5
v1026 = EXTRACR_SUBREG v1024, 6
= VSTxx <addr>, v1025, v1026
The REG_SEQUENCE ensures the sources that feed into the VST instruction
are getting the right register allocation so they form a large super-
register. The extract_subreg will be coalesced away all would just work:
v1024 = REG_SEQUENCE ...
= VSTxx <addr>, v1024:5, v1024:6
The problem is if the coalescer isn't run, the extract_subreg instructions
would stick around and there is no assurance v1025 and v1026 will get the
right registers.
As a short term workaround, teach the NEON pre-allocation pass to transfer
the sub-register indices over. An alternative would be do it 2addr pass
when reg_sequence's are eliminated. But that *seems* wrong and require
updating liveness information.
Another alternative is to do this in the scheduler when the instructions are
created. But that would mean somehow the scheduler this has to be done for
correctness reason. That's yucky as well. So for now, we are leaving this
in the target specific pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103540 91177308-0d34-0410-b5e6-96231b3b80d8
be diced into atoms, and adjust getAtom() to take this into account.
- This fixes relocations to symbols in fixed size literal sections, for
example.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103532 91177308-0d34-0410-b5e6-96231b3b80d8
to LLVM_LIBRARY_VISIBILITY and introduce LLVM_GLOBAL_VISIBILITY, which is
the opposite, for future use by dragonegg.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103495 91177308-0d34-0410-b5e6-96231b3b80d8
and the others use the regular addPassesToEmitFile hook now, and
llc no longer needs a bunch of redundant code to handle the
whole-file case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103492 91177308-0d34-0410-b5e6-96231b3b80d8
Move EmitTargetCodeForMemcpy, EmitTargetCodeForMemset, and
EmitTargetCodeForMemmove out of TargetLowering and into
SelectionDAGInfo to exercise this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103481 91177308-0d34-0410-b5e6-96231b3b80d8
string of features for that target. However LTO was using that string to pass
into the "create target machine" stuff. That stuff needed the feature string to
be in a particular form. In particular, it needed the CPU specified first and
then the attributes. If there isn't a CPU specified, it required it to be blank
-- e.g., ",+altivec". Yuck.
Modify the getDefaultSubtargetFeatures method to be a non-static member
function. For all attributes for a specific subtarget, it will add them in like
normal. It will also take a CPU string so that it can satisfy this horrible
syntax.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103451 91177308-0d34-0410-b5e6-96231b3b80d8
changed dllexport code to use EmitBytes instead of EmitRawText, and changed the export option to use /EXPORT: instead of -export: on the windows platform
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103377 91177308-0d34-0410-b5e6-96231b3b80d8
