Thomas Harte
66c2eb0414
Further tightens const
and constexpr
usage.
2020-05-12 22:22:21 -04:00
Thomas Harte
b7fd4de32f
Ensures a one-instruction latency on the trace flag.
2020-01-18 22:06:00 -05:00
Thomas Harte
274867579b
Deploys constexpr
as a stricter const
.
2019-12-22 00:22:17 -05:00
Thomas Harte
6a80832140
Moves timing of interrupt sampling into prefetch queue advancement.
...
As per comment, that is definitely the only place it can occur; I don't know whether it always occurs there.
2019-08-04 21:06:34 -04:00
Thomas Harte
5769944918
Shrinks MicroOp
struct size from 16 bytes to 4.
2019-07-25 10:14:36 -04:00
Thomas Harte
f2ae04597f
Updates test case.
2019-07-24 22:07:17 -04:00
Thomas Harte
1327de1c82
Slims the Program struct down to 8 bytes total.
2019-07-24 22:02:50 -04:00
Thomas Harte
827c4e172a
Cuts a third from the Program
struct.
...
Observation: [source/destination]_address are always one of the address registers. So you can fit both within a single byte.
Net effect: around a 12% reduction in execution costs, given that this reduces the size of the instructions table from 3mb to 2mb.
2019-07-24 18:39:36 -04:00
Thomas Harte
4aca6c5ef8
Adds a note of admission here.
2019-07-23 23:03:15 -04:00
Thomas Harte
fa226bb1b9
Seeks to reduce enquiry costs.
2019-07-17 15:09:26 -04:00
Thomas Harte
dbdbea85c2
Imports CMPA tests, and fixes CMPA.w.
2019-06-26 21:42:48 -04:00
Thomas Harte
faef917cbd
Improves resizeable microcycle test.
2019-06-24 10:55:22 -04:00
Thomas Harte
d27ba90c07
Attempts to introduce more rigour to variable-length instruction handling.
2019-06-24 10:43:28 -04:00
Thomas Harte
4d4ddded6d
Fixes register-relative JMP and JSR.
2019-06-03 15:29:50 -04:00
Thomas Harte
541b75ee6e
Further fixes PEA, and OR/AND/EOR Dn, (An).
2019-05-29 14:37:15 -04:00
Thomas Harte
2c9a1f7b16
Restores vector.
2019-05-03 14:50:07 -04:00
Thomas Harte
2e5c0811e7
Makes some effort at getting into interrupt processing.
2019-05-01 15:26:36 -04:00
Thomas Harte
f6ac407e4d
Takes further steps towards supporting interrupts.
...
Specifically:
* introduces the necessary bus signalling; and
* adds corresponding functional steps.
Still to figure out: getting into and out of an interrupt cycle.
2019-05-01 15:19:24 -04:00
Thomas Harte
92568c90c8
Adds support for HALT as an input, and puts some effort into how to calculate E.
2019-04-30 22:07:48 -04:00
Thomas Harte
31bb770fdd
Implement STOPpages, waits for DTack, and bus and address error exceptions.
2019-04-30 19:24:22 -04:00
Thomas Harte
977f9ee831
Takes a run at divide-by-zero exceptions and starts looking towards ways to improve startup time.
2019-04-29 22:08:16 -04:00
Thomas Harte
16fb3b49a5
It leads to a TODO, but implemented decoding and initial setup of STOPpages.
2019-04-29 19:30:00 -04:00
Thomas Harte
3da1b3bf9b
Introduces storage for various bus inputs.
2019-04-29 19:22:05 -04:00
Thomas Harte
d9071ee9f1
Starts sketching out the asynchronous bus.
2019-04-29 13:45:53 -04:00
Thomas Harte
ca1f669e64
Implements MOVEP.
...
371 is now the alleged number of missing opcodes. But I'd dare imagine it's more like three or four.
2019-04-28 22:52:54 -04:00
Thomas Harte
0298b1b3b7
Implements LINK and UNLINK.
...
Also starts excluding opcodes that I can't determine the mapping of from the list of those tested against.
Due to those two things together, the latter incomplete: 627 opcodes outstanding. But only STOP and MOVEP remain on my list of things to implement prior to exceptions.
2019-04-28 17:12:31 -04:00
Thomas Harte
4b1324de77
Takes a run at TRAPV.
...
... to leave 1466 as the unimplemented count.
2019-04-28 15:52:58 -04:00
Thomas Harte
8e8dce9bec
Attempts an implementation of CHK.
...
1467 is now the official count of things to implement, though I'm starting to get suspicious.
2019-04-28 15:47:21 -04:00
Thomas Harte
f4350522bf
Implements NBCD.
...
Now outstanding: 1891.
2019-04-27 21:29:50 -04:00
Thomas Harte
ab5fcab9bf
Attempts an implementation of ADDX and SUBX.
...
Leaving 2005 non-[A/F]-line instructions.
2019-04-27 16:57:47 -04:00
Thomas Harte
e75b386f7d
Attempts DIVU and DIVS.
...
Reportedly leaving 10965 operations now unimplemented.
2019-04-26 22:22:35 -04:00
Thomas Harte
a3b6d2d16e
Corrects test and resolves all instances of opcodes that are valid but shouldn't be.
...
The converse case will require implementation of the remaining instructions.
2019-04-25 22:54:58 -04:00
Thomas Harte
3983f8303f
Introduces failing test of 68000 opcode coverage.
2019-04-25 22:06:05 -04:00
Thomas Harte
dab9bb6575
Implements EXT.
2019-04-25 18:22:19 -04:00
Thomas Harte
8557e563bc
Takes a run at TAS, clarifying bus cycles.
2019-04-25 12:19:40 -04:00
Thomas Harte
002796e5f5
Takes a run at BSET and BCHG.
2019-04-24 23:01:32 -04:00
Thomas Harte
582e4acc11
Implements ANDI/ORI/EOR to SR/CCR.
2019-04-24 17:38:59 -04:00
Thomas Harte
11bf706aa2
Attempts to fix LT and LTE conditions.
2019-04-24 10:07:17 -04:00
Thomas Harte
033b8e6b36
ADD/SUBQ #, An shouldn't set flags.
...
Also, temporarily at least, adds a new means for observing CPU behaviour.
2019-04-24 09:59:54 -04:00
Thomas Harte
ee7ae11e90
Implements EXG and SWAP.
2019-04-19 11:27:43 -04:00
Thomas Harte
64c4137e5b
Begins a cleanup procedure on MOVE.
2019-04-18 23:25:19 -04:00
Thomas Harte
8c26d0c6e6
Makes an attempt at RTE and RTR.
2019-04-18 20:50:58 -04:00
Thomas Harte
e49b257e94
Takes a run at TRAP.
2019-04-17 22:21:56 -04:00
Thomas Harte
cadc0bd509
Mental delusion lifted: JSR doesn't look enough like BSR.
2019-04-17 10:02:14 -04:00
Thomas Harte
8f77d1831b
Implements MULU and MULS.
2019-04-16 22:16:43 -04:00
Thomas Harte
d8d974e2d7
Consolidates JSR and BSR preparation.
2019-04-16 21:29:37 -04:00
Thomas Harte
9b7ca6f271
Implements the basics of EORI, ORI, ANDI, SUBI and ADDI.
...
Also corrects the BSR return address.
2019-04-16 19:50:10 -04:00
Thomas Harte
8ce018dbab
Adds the necessary runtime support for AND, EOR and OR.
2019-04-16 15:17:40 -04:00
Thomas Harte
37656f14d8
Adds basic addressing modes for [ADD/SUB]Q.
2019-04-16 11:19:45 -04:00
Thomas Harte
dec5535e54
Implements (arguably: fixes) BSR.
2019-04-15 23:20:36 -04:00