was inserted or not. This allows bitcast in fast isel to properly handle the case
where an appropriate reg-to-reg copy is not available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55375 91177308-0d34-0410-b5e6-96231b3b80d8
process up to a higher level. This allows FastISel to leverage
more of SelectionDAGISel's infastructure, such as updating Machine
PHI nodes.
Also, implement transitioning from SDISel back to FastISel in
the middle of a block, so it's now possible to go back and
forth. This allows FastISel to hand individual CallInsts and other
complicated things off to SDISel to handle, while handling the rest
of the block itself.
To help support this, reorganize the SelectionDAG class so that it
is allocated once and reused throughout a function, instead of
being completely reallocated for each block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55219 91177308-0d34-0410-b5e6-96231b3b80d8
replacement of multiple values. This is slightly more efficient
than doing multiple ReplaceAllUsesOfValueWith calls, and theoretically
could be optimized even further. However, an important property of this
new function is that it handles the case where the source value set and
destination value set overlap. This makes it feasible for isel to use
SelectNodeTo in many very common cases, which is advantageous because
SelectNodeTo avoids a temporary node and it doesn't require CSEMap
updates for users of values that don't change position.
Revamp MorphNodeTo, which is what does all the work of SelectNodeTo, to
handle operand lists more efficiently, and to correctly handle a number
of corner cases to which its new wider use exposes it.
This commit also includes a change to the encoding of post-isel opcodes
in SDNodes; now instead of being sandwiched between the target-independent
pre-isel opcodes and the target-dependent pre-isel opcodes, post-isel
opcodes are now represented as negative values. This makes it possible
to test if an opcode is pre-isel or post-isel without having to know
the size of the current target's post-isel instruction set.
These changes speed up llc overall by 3% and reduce memory usage by 10%
on the InstructionCombining.cpp testcase with -fast and -regalloc=local.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53728 91177308-0d34-0410-b5e6-96231b3b80d8
MachineMemOperands. The pools are owned by MachineFunctions.
This drastically reduces the number of calls to malloc/free made
during the "Emit" phase of scheduling, as well as later phases
in CodeGen. Combined with other changes, this speeds up the
"instruction selection" phase of CodeGen by 10% in some cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53212 91177308-0d34-0410-b5e6-96231b3b80d8
hook for each way in which a result type can be
legalized (promotion, expansion, softening etc),
just use one: ReplaceNodeResults, which returns
a node with exactly the same result types as the
node passed to it, but presumably with a bunch of
custom code behind the scenes. No change if the
new LegalizeTypes infrastructure is not turned on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53137 91177308-0d34-0410-b5e6-96231b3b80d8
- Also remove LiveVariables::instructionChanged, etc. Replace all calls with cheaper calls which update VarInfo kill list.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53097 91177308-0d34-0410-b5e6-96231b3b80d8
the need for a flavor operand, and add a new SDNode subclass,
LabelSDNode, for use with them to eliminate the need for a label id
operand.
Change instruction selection to let these label nodes through
unmodified instead of creating copies of them. Teach the MachineInstr
emitter how to emit a MachineInstr directly from an ISD label node.
This avoids the need for allocating SDNodes for the label id and
flavor value, as well as SDNodes for each of the post-isel label,
label id, and label flavor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52943 91177308-0d34-0410-b5e6-96231b3b80d8
purpose, and give it a custom SDNode subclass so that it doesn't
need to have line number, column number, filename string, and
directory string, all existing as individual SDNodes to be the
operands.
This was the only user of ISD::STRING, StringSDNode, etc., so
remove those and some associated code.
This makes stop-points considerably easier to read in
-view-legalize-dags output, and reduces overhead (creating new
nodes and copying std::strings into them) on code containing
debugging information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52924 91177308-0d34-0410-b5e6-96231b3b80d8
it impossible to create a MERGE_VALUES node with
only one result: sometimes it is useful to be able
to create a node with only one result out of one of
the results of a node with more than one result, for
example because the new node will eventually be used
to replace a one-result node using ReplaceAllUsesWith,
cf X86TargetLowering::ExpandFP_TO_SINT. On the other
hand, most users of MERGE_VALUES don't need this and
for them the optimization was valuable. So add a new
utility method getMergeValues for creating MERGE_VALUES
nodes which by default performs the optimization.
Change almost everywhere to use getMergeValues (and
tidy some stuff up at the same time).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52893 91177308-0d34-0410-b5e6-96231b3b80d8
Added abstract class MemSDNode for any Node that have an associated MemOperand
Changed atomic.lcs => atomic.cmp.swap, atomic.las => atomic.load.add, and
atomic.lss => atomic.load.sub
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52706 91177308-0d34-0410-b5e6-96231b3b80d8
of apint codegen failure is the DAG combiner doing
the wrong thing because it was comparing MVT's using
< rather than comparing the number of bits. Removing
the < method makes this mistake impossible to commit.
Instead, add helper methods for comparing bits and use
them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52098 91177308-0d34-0410-b5e6-96231b3b80d8
and better control the abstraction. Rename the type
to MVT. To update out-of-tree patches, the main
thing to do is to rename MVT::ValueType to MVT, and
rewrite expressions like MVT::getSizeInBits(VT) in
the form VT.getSizeInBits(). Use VT.getSimpleVT()
to extract a MVT::SimpleValueType for use in switch
statements (you will get an assert failure if VT is
an extended value type - these shouldn't exist after
type legalization).
This results in a small speedup of codegen and no
new testsuite failures (x86-64 linux).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52044 91177308-0d34-0410-b5e6-96231b3b80d8
are represented as "weak", but there are subtle differences
in some cases on Darwin, so we need both. The intent
is that "common" will behave identically to "weak" unless
somebody changes their target to do something else.
No functional change as yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51118 91177308-0d34-0410-b5e6-96231b3b80d8
This eliminates the need for several awkward casts, including
the last dynamic_cast under lib/Target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51091 91177308-0d34-0410-b5e6-96231b3b80d8
several things that were neither in an anonymous namespace nor static
but not intended to be global.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51017 91177308-0d34-0410-b5e6-96231b3b80d8
on any current target and aren't optimized in DAGCombiner. Instead
of using intermediate nodes, expand the operations, choosing between
simple loads/stores, target-specific code, and library calls,
immediately.
Previously, the code to emit optimized code for these operations
was only used at initial SelectionDAG construction time; now it is
used at all times. This fixes some cases where rep;movs was being
used for small copies where simple loads/stores would be better.
This also cleans up code that checks for alignments less than 4;
let the targets make that decision instead of doing it in
target-independent code. This allows x86 to use rep;movs in
low-alignment cases.
Also, this fixes a bug that resulted in the use of rep;stos for
memsets of 0 with non-constant memory size when the alignment was
at least 4. It's better to use the library in this case, which
can be significantly faster when the size is large.
This also preserves more SourceValue information when memory
intrinsics are lowered into simple loads/stores.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49572 91177308-0d34-0410-b5e6-96231b3b80d8
that merely add passes. This allows them to be used with either
FunctionPassManager or PassManager, or even with a custom new
kind of pass manager.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48256 91177308-0d34-0410-b5e6-96231b3b80d8
return ValueType can depend its operands' ValueType.
This is a cosmetic change, no functionality impacted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48145 91177308-0d34-0410-b5e6-96231b3b80d8
