fully specified at this level. Subclasses of NLdStLN can specify selective
bit(s) for Inst{7-4}, as is done for VLD[234]LN* and VST[234]LN* inside
ARMInstrNEON.td.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89377 91177308-0d34-0410-b5e6-96231b3b80d8
they are lowered to instruction sequences more complex than a simple
load, such that CodeGen cannot rematerialize them, a reload from a
spill slot is likely to be cheaper than the complex sequence.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89374 91177308-0d34-0410-b5e6-96231b3b80d8
Add a -linearscan-skip-count argument (default to 0) that tells the
allocator to remember the last N registers it allocated and skip them
when looking for a register candidate. This tends to spread out
register usage and free up post-allocation scheduling at the cost of
slightly more register pressure. The primary benefit is the ability
to backschedule reloads.
This is turned off by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89356 91177308-0d34-0410-b5e6-96231b3b80d8
All spiller calls in RegAllocLinearScan now go through the new Spiller interface.
The "-new-spill-framework" command line option has been removed. To use the trivial in-place spiller you should now pass "-spiller=trivial -rewriter=trivial".
(Note the trivial spiller/rewriter are only meant to serve as examples of the new in-place modification work. Enabling them will yield terrible, though hopefully functional, code).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89311 91177308-0d34-0410-b5e6-96231b3b80d8
for uses inside the loop. This works better with LSR. Disabled behind
-simplify-iv-users while benchmarking.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89299 91177308-0d34-0410-b5e6-96231b3b80d8
When TwoAddressInstructionPass deletes a dead instruction, make sure that all
register kills are accounted for. The 2-addr register does not get special
treatment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89246 91177308-0d34-0410-b5e6-96231b3b80d8
when LiveVariables is available.
The -split-phi-edges is now gone, and so is the hack to disable it when using
the local register allocator. The PHIElimination pass no longer has
LiveVariables as a prerequisite - that is what broke the local allocator.
Instead we do critical edge splitting when possible - that is when
LiveVariables is available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89213 91177308-0d34-0410-b5e6-96231b3b80d8
contents of the block to be duplicated. Use this for ARM Cortex A8/9 to
be more aggressive tail duplicating indirect branches, since it makes it
much more likely that they will be predicted in the branch target buffer.
Testcase coming soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89187 91177308-0d34-0410-b5e6-96231b3b80d8
This is probably not confined to *just* these two things.
Anyway, the llvm-gcc front-end may look up the structure layout information for
an abstract type. That information will be stored into a table with the FE's
TD. Instruction combine can come along and also ask for information on that
abstract type, but for a separate TD (the one associated with the pass manager).
After the type is refined, the old structure layout information in the pass
manager's TD file is out of date. If a new type is allocated in the same space
as the old-unrefined type, then the structure type information in the pass
manager's TD file will be wrong, but won't know it.
Fix this by making the TD's structure type information an abstract type user.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89176 91177308-0d34-0410-b5e6-96231b3b80d8
The local register allocator doesn't like it when LiveVariables is run.
We should also disable edge splitting under -O0, but that has to wait a bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89125 91177308-0d34-0410-b5e6-96231b3b80d8
unnecessary. It is broken because the "isIdenticalTo" check should be
negated. If that is fixed, this code causes the CodeGen/X86/tail-opts.ll
test to fail, in the dont_merge_oddly function. And, I confirmed that the
regression is real -- the generated code is worse. As far as I can tell,
that tail-opts.ll test is checking for what this code is supposed to handle
and we're doing the right thing anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89121 91177308-0d34-0410-b5e6-96231b3b80d8
libffi support and that the interpreter can't call external functions without
it. Patch by Timo Juhani Lindfors! Fixes PR5466.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89062 91177308-0d34-0410-b5e6-96231b3b80d8
unconditional branches or fallthroghes. Instcombine/SimplifyCFG
should be simplifying branches with known conditions.
This fixes some problems caused by these transformations not
updating the MachineBasicBlock CFG.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89017 91177308-0d34-0410-b5e6-96231b3b80d8
0b1110 (ALways). This is so that the disassembler decoder can distinguish among
BX_RET, BRIND, and BXr9.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89000 91177308-0d34-0410-b5e6-96231b3b80d8
The large code model is documented at
http://www.x86-64.org/documentation/abi.pdf and says that calls should
assume their target doesn't live within the 32-bit pc-relative offset
that fits in the call instruction.
To do this, we turn off the global-address->target-global-address
conversion in X86TargetLowering::LowerCall(). The first attempt at
this broke the lazy JIT because it can separate the movabs(imm->reg)
from the actual call instruction. The lazy JIT receives the address of
the movabs as a relocation and needs to record the return address from
the call; and then when that call happens, it needs to patch the
movabs with the newly-compiled target. We could thread the call
instruction into the relocation and record the movabs<->call mapping
explicitly, but that seems to require at least as much new
complication in the code generator as this change.
To fix this, we make lazy functions _always_ go through a call
stub. You'd think we'd only have to force lazy calls through a stub on
difficult platforms, but that turns out to break indirect calls
through a function pointer. The right fix for that is to distinguish
between calls and address-of operations on uncompiled functions, but
that's complex enough to leave for someone else to do.
Another attempt at this defined a new CALL64i pseudo-instruction,
which expanded to a 2-instruction sequence in the assembly output and
was special-cased in the X86CodeEmitter's emitInstruction()
function. That broke indirect calls in the same way as above.
This patch also removes a hack forcing Darwin to the small code model.
Without far-call-stubs, the small code model requires things of the
JITMemoryManager that the DefaultJITMemoryManager can't provide.
Thanks to echristo for lots of testing!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@88984 91177308-0d34-0410-b5e6-96231b3b80d8
The Mask and LHSMask may not be of the same size, so don't do the
transformation if they're different.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@88972 91177308-0d34-0410-b5e6-96231b3b80d8
Have the asm printer emit a comment if an instruction is a spill or
reload and have the spiller mark copies it introdues so the asm printer
can also annotate those.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@88911 91177308-0d34-0410-b5e6-96231b3b80d8
Make sure when ProcessImplicitDefs removes a copy which kills its source reg that it
removes the copy from said reg's Kills list.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@88881 91177308-0d34-0410-b5e6-96231b3b80d8
This allows JT to eliminate a ton of infeasible edges when
handling code like the templates in PatternMatch.h
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@88869 91177308-0d34-0410-b5e6-96231b3b80d8
- This is an initial step towards -march=native support in Clang, and towards
eliminating host dependencies in the targets. See PR5389.
- Patch by Roman Divacky!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@88768 91177308-0d34-0410-b5e6-96231b3b80d8
- If destination is a physical register and it has a subreg index, use the
sub-register instead.
This fixes PR5423.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@88745 91177308-0d34-0410-b5e6-96231b3b80d8
When splitting an edge after a machine basic block with fall-through, we
forgot to insert a jump instruction. Fix this by calling updateTerminator() on
the fall-through block when relevant.
Also be more precise in PHIElimination::isLiveIn.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@88728 91177308-0d34-0410-b5e6-96231b3b80d8
The BasicBlock associated with a MachineBasicBlock does not necessarily
correspond to the code in the MBB.
Don't insert a new IR BasicBlock when splitting critical edges. We are not
supposed to modify the IR during codegen, and we should be able to do just
fine with a NULL BB.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@88707 91177308-0d34-0410-b5e6-96231b3b80d8
target-specific AsmPrinters. Not all comments need DebugInfo.
Re-enable the line numbers comment test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@88697 91177308-0d34-0410-b5e6-96231b3b80d8
code-size win, and not when it's only likely to be code-size neutral,
such as when only a single instruction would be eliminated and a new
branch would be required.
This fixes rdar://7392894.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@88692 91177308-0d34-0410-b5e6-96231b3b80d8
D0<def,dead> = ...
...
= S0<use, kill>
S0<def> = ...
...
D0<def> =
The first D0 def is correctly marked dead, however, livevariables should have
added an implicit def of S0 or we end up with a use without a def.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@88690 91177308-0d34-0410-b5e6-96231b3b80d8
Provide special isLoadFromStackSlotPostFE and isStoreToStackSlotPostFE
interfaces to explicitly request checking for post-frame ptr elimination
operands. This uses a heuristic so it isn't reliable for correctness.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@87047 91177308-0d34-0410-b5e6-96231b3b80d8
machine instruction loads or stores from/to a stack slot. Unlike
isLoadFromStackSlot and isStoreFromStackSlot, the instruction may be
something other than a pure load/store (e.g. it may be an arithmetic
operation with a memory operand). This helps AsmPrinter determine when
to print a spill/reload comment.
This is only a hint since we may not be able to figure this out in all
cases. As such, it should not be relied upon for correctness.
Implement for X86. Return false by default for other architectures.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@87026 91177308-0d34-0410-b5e6-96231b3b80d8
and don't assume that the call doesn't throw. It would be nice if there were a
way to determine which is the callee and which is a parameter. In practice, the
architecture we care about normally only have one operand for a call instruction
(x86 and arm).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@87023 91177308-0d34-0410-b5e6-96231b3b80d8
slots. The AsmPrinter will use this information to determine whether to
print a spill/reload comment.
Remove default argument values. It's too easy to pass a wrong argument
value when multiple arguments have default values. Make everything
explicit to trap bugs early.
Update all targets to adhere to the new interfaces..
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@87022 91177308-0d34-0410-b5e6-96231b3b80d8
making it visible to clients and adding LLVM-style cast capability.
This will be used by AsmPrinter to determine when to emit spill comments
for an instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@87019 91177308-0d34-0410-b5e6-96231b3b80d8
to directly follow the jump table. Move the layout changes to prior to any
constant island handling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86999 91177308-0d34-0410-b5e6-96231b3b80d8
running IPSCCP early, and we run functionattrs interlaced with the inliner,
we often (particularly for small or noop functions) completely propagate
all of the information about a call to its call site in IPSSCP (making a call
dead) and functionattrs is smart enough to realize that the function is
readonly (because it is interlaced with inliner).
To improve compile time and make the inliner threshold more accurate, realize
that we don't have to inline dead readonly function calls. Instead, just
delete the call. This happens all the time for C++ codes, here are some
counters from opt/llvm-ld counting the number of times calls were deleted vs
inlined on various apps:
Tramp3d opt:
5033 inline - Number of call sites deleted, not inlined
24596 inline - Number of functions inlined
llvm-ld:
667 inline - Number of functions deleted because all callers found
699 inline - Number of functions inlined
483.xalancbmk opt:
8096 inline - Number of call sites deleted, not inlined
62528 inline - Number of functions inlined
llvm-ld:
217 inline - Number of allocas merged together
2158 inline - Number of functions inlined
471.omnetpp:
331 inline - Number of call sites deleted, not inlined
8981 inline - Number of functions inlined
llvm-ld:
171 inline - Number of functions deleted because all callers found
629 inline - Number of functions inlined
Deleting a call is much faster than inlining it, and is insensitive to the
size of the callee. :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86975 91177308-0d34-0410-b5e6-96231b3b80d8
cannot be folded into target cmp instruction.
- Avoid a phase ordering issue where early cmp optimization would prevent the
later count-to-zero optimization.
- Add missing checks which could cause LSR to reuse stride that does not have
users.
- Fix a bug in count-to-zero optimization code which failed to find the pre-inc
iv's phi node.
- Remove, tighten, loosen some incorrect checks disable valid transformations.
- Quite a bit of code clean up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86969 91177308-0d34-0410-b5e6-96231b3b80d8
making the new LVI stuff smart enough to subsume some special
cases in the old code. Disable them when LVI is around, the
testcase still passes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86951 91177308-0d34-0410-b5e6-96231b3b80d8
This allows StringRef to skip controversial if(str) check in constructor.
Buildbots, wait for corresponding clang and llvm-gcc FE check-ins!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86914 91177308-0d34-0410-b5e6-96231b3b80d8
instead of typedefs for std::pair. This simplifies the type of
SameTails, which previously was std::vector<std::pair<std::vector<std::pair<unsigned, MachineBasicBlock *> >::iterator, MachineBasicBlock::iterator>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86885 91177308-0d34-0410-b5e6-96231b3b80d8
tail merging support to handle more cases.
- Recognize several cases where tail merging is beneficial even when
the tail size is smaller than the generic threshold.
- Make use of MachineInstrDesc::isBarrier to help detect
non-fallthrough blocks.
- Check for and avoid disrupting fall-through edges in more cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86871 91177308-0d34-0410-b5e6-96231b3b80d8
- Edges are split before any phis are eliminated, so the code is SSA.
- Create a proper IR BasicBlock for the split edges.
- LiveVariables::addNewBlock now has same syntax as
MachineDominatorTree::addNewBlock. Algorithm calculates predecessor live-out
set rather than successor live-in set.
This feature still causes some miscompilations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86867 91177308-0d34-0410-b5e6-96231b3b80d8
llvm.invariant.start to be used without necessarily being paired with a call
to llvm.invariant.end. If you run the entire optimization pipeline then such
calls are in fact deleted (adce does it), but that's actually a good thing since
we probably do want them to be zapped late in the game. There should really be
an integration test that checks that the llvm.invariant.start call lasts long
enough that all passes that do interesting things with it get to do their stuff
before it is deleted. But since no passes do anything interesting with it yet
this will have to wait for later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86840 91177308-0d34-0410-b5e6-96231b3b80d8
can only branch forward. To best take advantage of them, we'd like to adjust
the basic blocks around a bit when reasonable. This patch puts basics in place
to do that, with a super-simple algorithm for backwards jump table targets that
creates a new branch after the jump table which branches backwards. Real
heuristics for reordering blocks or other modifications rather than inserting
branches will follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86791 91177308-0d34-0410-b5e6-96231b3b80d8
start using them in a trivial way when -enable-jump-threading-lvi
is passed. enable-jump-threading-lvi will be my playground for
awhile.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86789 91177308-0d34-0410-b5e6-96231b3b80d8
constant whose component type is not a legal type for the target.
(If the target ConstantPool cannot handle this type either, it has
an opportunity to merge elements. In practice any target with
8-bit bytes must support i8 *as data*). 7320806 (partial).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86751 91177308-0d34-0410-b5e6-96231b3b80d8
