MIOperands/ConstMIOperands are classes iterating over the MachineOperand
of a MachineInstr, however MachineInstr::mop_iterator does the same
thing.
I assume these two iterators exist to have a uniform interface to
iterate over the operands of a machine instruction bundle and a single
machine instruction. However in practice I find it more confusing to have 2
different iterator classes, so this patch transforms (nearly all) the
code to use mop_iterators.
The only exception being MIOperands::anlayzePhysReg() and
MIOperands::analyzeVirtReg() still needing an equivalent, I leave that
as an exercise for the next patch.
Differential Revision: http://reviews.llvm.org/D9932
This version is slightly modified from the proposed revision in that it
introduces MachineInstr::getOperandNo to avoid the extra counting
variable in the few loops that previously used MIOperands::getOperandNo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238539 91177308-0d34-0410-b5e6-96231b3b80d8
TargetRegisterInfo::getRegPressureLimit has a note that it is an old
model that relies on manually entered classes. Using the newer model of
register pressure sets seems more appropriate. We might eventually even
switch to lib/CodeGen/RegisterPressure.cpp, but we should probably do
incremental changes here.
Using the newer model also makes it easier to take regmasks into account
which is necessary to fix llvm.org/PR23143. I am currently also
preparing a patch for that, but would like to do this switch
independently.
Review: http://reviews.llvm.org/D8986
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234880 91177308-0d34-0410-b5e6-96231b3b80d8
There were four almost identical implementations of calculating/updating
the register pressure for a certain MachineInstr. Cleanup to have a
single implementation (well, controlled with two bool flags until this
is cleaned up more).
No functional changes intended.
Tested by verify that there are no binary changes in the entire llvm
test-suite. A new test was added separately in r234309 as it revealed a
pre-existing error in the register pressure calculation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234325 91177308-0d34-0410-b5e6-96231b3b80d8
Specifically, if there are copy-like instructions in the loop header
they are moved into the loop close to their uses. This reduces the live
intervals of the values and can avoid register spills.
This is working towards a fix for http://llvm.org/PR22230.
Review: http://reviews.llvm.org/D7259
Next steps:
- Find a better cost model (which non-copy instructions should be sunk?)
- Make this dependent on register pressure
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232262 91177308-0d34-0410-b5e6-96231b3b80d8
Specifically:
- Calculate the loop pre-header once at the stat of HoistOutOfLoop, so:
- We don't-DFS walk the MachineDomTree if we aren't going to do anything
- Don't call getCurPreheader for each Scope
- Don't needlessly use a do-while loop
- Use early exit for Scopes.size() == 0
No functional changes intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228350 91177308-0d34-0410-b5e6-96231b3b80d8
Add a command-line option to enable hoisting even cheap instructions (in
low-register-pressure situations). This is turned off by default, but has
proved useful for testing purposes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225470 91177308-0d34-0410-b5e6-96231b3b80d8
This is to be consistent with StringSet and ultimately with the standard
library's associative container insert function.
This lead to updating SmallSet::insert to return pair<iterator, bool>,
and then to update SmallPtrSet::insert to return pair<iterator, bool>,
and then to update all the existing users of those functions...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222334 91177308-0d34-0410-b5e6-96231b3b80d8
define below all header includes in the lib/CodeGen/... tree. While the
current modules implementation doesn't check for this kind of ODR
violation yet, it is likely to grow support for it in the future. It
also removes one layer of macro pollution across all the included
headers.
Other sub-trees will follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206837 91177308-0d34-0410-b5e6-96231b3b80d8
operator* on the by-operand iterators to return a MachineOperand& rather than
a MachineInstr&. At this point they almost behave like normal iterators!
Again, this requires making some existing loops more verbose, but should pave
the way for the big range-based for-loop cleanups in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203865 91177308-0d34-0410-b5e6-96231b3b80d8
Post-RA LICM keeps three sets of registers: PhysRegDefs, PhysRegClobbers
and TermRegs. When it sees a definition of R it adds all aliases of R
to the corresponding set, so that when it needs to test for membership
it only needs to test a single register, rather than worrying about
aliases there too. E.g. the final candidate loop just has:
unsigned Def = Candidates[i].Def;
if (!PhysRegClobbers.test(Def) && ...) {
to test whether register Def is multiply defined.
However, there was also a shortcut in ProcessMI to make sure we didn't
add candidates if we already knew that they would fail the final test.
This shortcut was more pessimistic than the final one because it
checked whether _any alias_ of the defined register was multiply defined.
This is too conservative for targets that define register pairs.
E.g. on z, R0 and R1 are sometimes used as a pair, so there is a
128-bit register that aliases both R0 and R1. If a loop used
R0 and R1 independently, and the definition of R0 came first,
we would be able to hoist the R0 assignment (because that used
the final test quoted above) but not the R1 assignment (because
that meant we had two definitions of the paired R0/R1 register
and would fail the shortcut in ProcessMI).
This patch just uses the same check for the ProcessMI shortcut as
we use in the final candidate loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188774 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still
a complete mess but as long as the edges consist of virtual call it doesn't
cause breakage. BasicTTI did static calls and thus broke some build
configurations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172246 91177308-0d34-0410-b5e6-96231b3b80d8
Sooooo many of these had incorrect or strange main module includes.
I have manually inspected all of these, and fixed the main module
include to be the nearest plausible thing I could find. If you own or
care about any of these source files, I encourage you to take some time
and check that these edits were sensible. I can't have broken anything
(I strictly added headers, and reordered them, never removed), but they
may not be the headers you'd really like to identify as containing the
API being implemented.
Many forward declarations and missing includes were added to a header
files to allow them to parse cleanly when included first. The main
module rule does in fact have its merits. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169131 91177308-0d34-0410-b5e6-96231b3b80d8
No functional change intended.
Sorry for the churn. The iterator classes are supposed to help avoid
giant commits like this one in the future. The TableGen-produced
register lists are getting quite large, and it may be necessary to
change the table representation.
This makes it possible to do so without changing all clients (again).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157854 91177308-0d34-0410-b5e6-96231b3b80d8
The getPointerRegClass() hook can return register classes that depend on
the calling convention of the current function (ptr_rc_tailcall).
So far, we have been able to infer the calling convention from the
subtarget alone, but as we add support for multiple calling conventions
per target, that no longer works.
Patch by Yiannis Tsiouris!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156328 91177308-0d34-0410-b5e6-96231b3b80d8
Allow cheap instructions to be hoisted if they are register pressure
neutral or better. This happens if the instruction is the last loop use
of another virtual register.
Only expensive instructions are allowed to increase loop register
pressure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154455 91177308-0d34-0410-b5e6-96231b3b80d8
Hoisting a value that is used by a PHI in the loop will introduce a
copy because the live range is extended to cross the PHI.
The same applies to PHIs in exit blocks.
Also use this opportunity to make HasLoopPHIUse() non-recursive.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154454 91177308-0d34-0410-b5e6-96231b3b80d8
This caused miscompilations on out-of-tree targets, and possibly i386 as
well.
I'll find some other way of hoisting %rip-relative loads from loops
containing calls.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150816 91177308-0d34-0410-b5e6-96231b3b80d8
When using register masks, registers like %rip are clobbered by the
register mask. LICM should still be able to hoist instructions reading
%rip from a loop containing calls.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150288 91177308-0d34-0410-b5e6-96231b3b80d8
Moving toward a uniform style of pass definition to allow easier target configuration.
Globally declare Pass ID.
Globally declare pass initializer.
Use INITIALIZE_PASS consistently.
Add a call to the initializer from CodeGen.cpp.
Remove redundant "createPass" functions and "getPassName" methods.
While cleaning up declarations, cleaned up comments (sorry for large diff).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150100 91177308-0d34-0410-b5e6-96231b3b80d8
It doesn't seem worthwhile to give meaning to a NULL register mask
pointer. It complicates all the code using register mask operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149646 91177308-0d34-0410-b5e6-96231b3b80d8
