PPCInstrInfo.cpp has ended up containing several small MI-level passes, and
this is making the file harder to read than necessary. Split out
PPCVSXFMAMutate into its own source file. NFC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227770 91177308-0d34-0410-b5e6-96231b3b80d8
This MI-level pass was necessary when VSX support was first being developed,
specifically, before the ABI code had been updated to use VSX registers for
arguments (the register assignments did not change, in a physical sense, but
the VSX super-registers are now used). Unfortunately, I never went back and
removed this pass after that was done. I believe this code is now effectively
dead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227767 91177308-0d34-0410-b5e6-96231b3b80d8
When PPCEarlyReturn, it should really copy implicit ops from the old return
instruction to the new one. This currently does not matter much, because we run
PPCEarlyReturn very late in the pipeline (there is nothing to do DCE on
definitions of those registers). However, for completeness, we should do it
anyway.
Noticed by inspection (and there should be no functional change); thus, no
test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227763 91177308-0d34-0410-b5e6-96231b3b80d8
The VSX store instructions were also picking up an implicit "may read" from the
default pattern, which was an intrinsic (and we don't currently have a way of
specifying write-only intrinsics).
This was causing MI verification to fail for VSX spill restores.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227759 91177308-0d34-0410-b5e6-96231b3b80d8
isel is actually a cracked instruction on the P7/P8, and must start a dispatch
group. The scheduling model should reflect this so that we don't bunch too many
of them together when possible.
Thanks to Bill Schmidt and Pat Haugen for helping to sort this out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227758 91177308-0d34-0410-b5e6-96231b3b80d8
Other than moving code and adding the boilerplate for the new files, the code
being moved is unchanged.
There are a few global functions that are shared with the rest of the
LoopVectorizer. I moved these to the new module as well (emitLoopAnalysis,
stripIntegerCast, replaceSymbolicStrideSCEV) along with the Report class used
by emitLoopAnalysis. There is probably room for further improvement in this
area.
I kept DEBUG_TYPE "loop-vectorize" because it's used as the PassName with
emitOptimizationRemarkAnalysis. This will obviously have to change.
NFC. This is part of the patchset that splits out the memory dependence logic
from LoopVectorizationLegality into a new class LoopAccessAnalysis.
LoopAccessAnalysis will be used by the new Loop Distribution pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227756 91177308-0d34-0410-b5e6-96231b3b80d8
This class needs to remain public because it's used by
LoopVectorizationLegality::addRuntimeCheck.
NFC. This is part of the patchset that splits out the memory dependence logic
from LoopVectorizationLegality into a new class LoopAccessAnalysis.
LoopAccessAnalysis will be used by the new Loop Distribution pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227755 91177308-0d34-0410-b5e6-96231b3b80d8
Rather than using globals use a structure to pass parameters from the
vectorizer. This prepares the class to be moved outside the LoopVectorizer.
It's not great how all this is passed through in LoopAccessAnalysis but this
is all expected to change once the class start servicing the Loop Distribution
pass as well where some of these parameters make no sense.
NFC. This is part of the patchset that splits out the memory dependence logic
from LoopVectorizationLegality into a new class LoopAccessAnalysis.
LoopAccessAnalysis will be used by the new Loop Distribution pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227754 91177308-0d34-0410-b5e6-96231b3b80d8
This moves the transformation introduced in r223757 into a separate MI pass.
This allows it to cover many more cases (not only cases where there must be a
reserved call frame), and perform rudimentary call folding. It still doesn't
have a heuristic, so it is enabled only for optsize/minsize, with stack
alignment <= 8, where it ought to be a fairly clear win.
(Re-commit of r227728)
Differential Revision: http://reviews.llvm.org/D6789
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227752 91177308-0d34-0410-b5e6-96231b3b80d8
Move the canVectorizeMemory functionality from LoopVectorizationLegality to a
new class LoopAccessAnalysis and forward users.
Currently the collection of the symbolic stride information is kept with
LoopVectorizationLegality and it becomes an input to LoopAccessAnalysis.
NFC. This is part of the patchset that splits out the memory dependence logic
from LoopVectorizationLegality into a new class LoopAccessAnalysis.
LoopAccessAnalysis will be used by the new Loop Distribution pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227751 91177308-0d34-0410-b5e6-96231b3b80d8
These members are moving to LoopAccessAnalysis. The accessors help to hide
this.
NFC. This is part of the patchset that splits out the memory dependence logic
from LoopVectorizationLegality into a new class LoopAccessAnalysis.
LoopAccessAnalysis will be used by the new Loop Distribution pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227750 91177308-0d34-0410-b5e6-96231b3b80d8
This class will become public in the new LoopAccessAnalysis header so the name
needs to be more global.
NFC. This is part of the patchset that splits out the memory dependence logic
from LoopVectorizationLegality into a new class LoopAccessAnalysis.
LoopAccessAnalysis will be used by the new Loop Distribution pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227749 91177308-0d34-0410-b5e6-96231b3b80d8
The logic in emitAnalysis is duplicated across multiple functions. This
splits it into a function. Another use will be added by the patchset.
NFC. This is part of the patchset that splits out the memory dependence logic
from LoopVectorizationLegality into a new class LoopAccessAnalysis.
LoopAccessAnalysis will be used by the new Loop Distribution pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227748 91177308-0d34-0410-b5e6-96231b3b80d8
RuntimePointerCheck will be used through LoopAccessAnalysis in
LoopVectorizationLegality. Later in the patchset it will become a local class
of LoopAccessAnalysis.
NFC. This is part of the patchset that splits out the memory dependence logic
from LoopVectorizationLegality into a new class LoopAccessAnalysis.
LoopAccessAnalysis will be used by the new Loop Distribution pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227747 91177308-0d34-0410-b5e6-96231b3b80d8
The TOC base pointer is passed in r2, and we normally reserve this register so
that we can depend on it being there. However, for leaf functions, and
specifically those leaf functions that don't do any TOC access of their own
(which is generally due to accessing the constant pool, using TLS, etc.),
we can treat r2 as an ordinary callee-saved register (it must be callee-saved
because, for local direct calls, the linker will not insert any save/restore
code).
The allocation order has been changed slightly for PPC64/ELF systems to put r2
at the end of the list (while leaving it near the beginning for Darwin systems
to prevent unnecessary output changes). While r2 is allocatable, using it still
requires spill/restore traffic, and thus comes at the end of the list.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227745 91177308-0d34-0410-b5e6-96231b3b80d8
now that we have a correct and cached subtarget specific to the
function.
Also, finish providing a cached per-function subtarget in the core
LLVMTargetMachine -- that layer hadn't switched over yet.
The only use of the TargetMachine was to re-lookup a subtarget for
a particular function to work around the fact that TTI was immutable.
Now that it is per-function and we haved a cached subtarget, use it.
This still leaves a few interfaces with real warts on them where we were
passing Function objects through the TTI interface. I'll remove these
and clean their usage up in subsequent commits now that this isn't
necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227738 91177308-0d34-0410-b5e6-96231b3b80d8
intermediate TTI implementation template and instead query up to the
derived class for both the TargetMachine and the TargetLowering.
Most of the derived types had a TLI cached already and there is no need
to store a less precisely typed target machine pointer.
This will in turn make it much cleaner to look up the TLI via
a per-function subtarget instead of the generic subtarget, and it will
pave the way toward pulling the subtarget used for unroll preferences
into the same form once we are *always* using the function to look up
the correct subtarget.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227737 91177308-0d34-0410-b5e6-96231b3b80d8
TargetIRAnalysis access path directly rather than implementing getTTI.
This even removes getTTI from the interface. It's more efficient for
each target to just register a precise callback that creates their
specific TTI.
As part of this, all of the targets which are building their subtargets
individually per-function now build their TTI instance with the function
and thus look up the correct subtarget and cache it. NVPTX, R600, and
XCore currently don't leverage this functionality, but its trivial for
them to add it now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227735 91177308-0d34-0410-b5e6-96231b3b80d8
null.
For some reason some of the original TTI code supported a null target
machine. This seems to have been legacy, and I made matters worse when
refactoring this code by spreading that pattern further through the
various targets.
The TargetMachine can't actually be null, and it doesn't make sense to
support that use case. I've now consistently removed it and removed all
of the code trying to cope with that situation. This is probably good,
as several targets *didn't* cope with it being null despite the null
default argument in their constructors. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227734 91177308-0d34-0410-b5e6-96231b3b80d8
terms of the new pass manager's TargetIRAnalysis.
Yep, this is one of the nicer bits of the new pass manager's design.
Passes can in many cases operate in a vacuum and so we can just nest
things when convenient. This is particularly convenient here as I can
now consolidate all of the TargetMachine logic on this analysis.
The most important change here is that this pushes the function we need
TTI for all the way into the TargetMachine, and re-creates the TTI
object for each function rather than re-using it for each function.
We're now prepared to teach the targets to produce function-specific TTI
objects with specific subtargets cached, etc.
One piece of feedback I'd love here is whether its worth renaming any of
this stuff. None of the names really seem that awesome to me at this
point, but TargetTransformInfoWrapperPass is particularly ... odd.
TargetIRAnalysisWrapper might make more sense. I would want to do that
rename separately anyways, but let me know what you think.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227731 91177308-0d34-0410-b5e6-96231b3b80d8
getTTI method used to get an actual TTI object.
No functionality changed. This just threads the argument and ensures
code like the inliner can correctly look up the callee's TTI rather than
using a fixed one.
The next change will use this to implement per-function subtarget usage
by TTI. The changes after that should eliminate the need for FTTI as that
will have become the default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227730 91177308-0d34-0410-b5e6-96231b3b80d8
This moves the transformation introduced in r223757 into a separate MI pass.
This allows it to cover many more cases (not only cases where there must be a
reserved call frame), and perform rudimentary call folding. It still doesn't
have a heuristic, so it is enabled only for optsize/minsize, with stack
alignment <= 8, where it ought to be a fairly clear win.
Differential Revision: http://reviews.llvm.org/D6789
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227728 91177308-0d34-0410-b5e6-96231b3b80d8
This should be sufficient to replace the initial (minor) function pass
pipeline in Clang with the new pass manager. I'll probably add an (off
by default) flag to do that just to ensure we can get extra testing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227726 91177308-0d34-0410-b5e6-96231b3b80d8
I've added RUN lines both to the basic test for EarlyCSE and the
target-specific test, as this serves as a nice test that the TTI layer
in the new pass manager is in fact working well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227725 91177308-0d34-0410-b5e6-96231b3b80d8
produce it.
This adds a function to the TargetMachine that produces this analysis
via a callback for each function. This in turn faves the way to produce
a *different* TTI per-function with the correct subtarget cached.
I've also done the necessary wiring in the opt tool to thread the target
machine down and make it available to the pass registry so that we can
construct this analysis from a target machine when available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227721 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
CUDA driver can unroll loops when jit-compiling PTX. To prevent CUDA
driver from unrolling a loop marked with llvm.loop.unroll.disable is not
unrolled by CUDA driver, we need to emit .pragma "nounroll" at the
header of that loop.
This patch also extracts getting unroll metadata from loop ID metadata
into a shared helper function.
Test Plan: test/CodeGen/NVPTX/nounroll.ll
Reviewers: eliben, meheff, jholewinski
Reviewed By: jholewinski
Subscribers: jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D7041
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227703 91177308-0d34-0410-b5e6-96231b3b80d8
aggregate or scalar, the debug info needs to refer to the absolute offset
(relative to the entire variable) instead of storing the offset inside
the smaller aggregate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227702 91177308-0d34-0410-b5e6-96231b3b80d8
GCC 4.9 gives the following warning:
warning: enumeral and non-enumeral type in conditional expression
Cast the enumeral value to an integer within the ternary operation. NFC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227692 91177308-0d34-0410-b5e6-96231b3b80d8
The default op indices frmo TargetInstrInfo::findCommutedOpIndices are being commuted so we don't need to do this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227689 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds shuffle mask decodes for integer zero extends (pmovzx** and movq xmm,xmm) and scalar float/double loads/moves (movss/movsd).
Also adds shuffle mask decodes for integer loads (movd/movq).
Differential Revision: http://reviews.llvm.org/D7228
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227688 91177308-0d34-0410-b5e6-96231b3b80d8
base which it adds a single analysis pass to, to instead return the type
erased TargetTransformInfo object constructed for that TargetMachine.
This removes all of the pass variants for TTI. There is now a single TTI
*pass* in the Analysis layer. All of the Analysis <-> Target
communication is through the TTI's type erased interface itself. While
the diff is large here, it is nothing more that code motion to make
types available in a header file for use in a different source file
within each target.
I've tried to keep all the doxygen comments and file boilerplate in line
with this move, but let me know if I missed anything.
With this in place, the next step to making TTI work with the new pass
manager is to introduce a really simple new-style analysis that produces
a TTI object via a callback into this routine on the target machine.
Once we have that, we'll have the building blocks necessary to accept
a function argument as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227685 91177308-0d34-0410-b5e6-96231b3b80d8
This adds some comments and splits the flag calculation on type boundaries to
make the table more readable. Addresses some post-commit review comments to SVN
r227603. NFC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227670 91177308-0d34-0410-b5e6-96231b3b80d8
type erased interface and a single analysis pass rather than an
extremely complex analysis group.
The end result is that the TTI analysis can contain a type erased
implementation that supports the polymorphic TTI interface. We can build
one from a target-specific implementation or from a dummy one in the IR.
I've also factored all of the code into "mix-in"-able base classes,
including CRTP base classes to facilitate calling back up to the most
specialized form when delegating horizontally across the surface. These
aren't as clean as I would like and I'm planning to work on cleaning
some of this up, but I wanted to start by putting into the right form.
There are a number of reasons for this change, and this particular
design. The first and foremost reason is that an analysis group is
complete overkill, and the chaining delegation strategy was so opaque,
confusing, and high overhead that TTI was suffering greatly for it.
Several of the TTI functions had failed to be implemented in all places
because of the chaining-based delegation making there be no checking of
this. A few other functions were implemented with incorrect delegation.
The message to me was very clear working on this -- the delegation and
analysis group structure was too confusing to be useful here.
The other reason of course is that this is *much* more natural fit for
the new pass manager. This will lay the ground work for a type-erased
per-function info object that can look up the correct subtarget and even
cache it.
Yet another benefit is that this will significantly simplify the
interaction of the pass managers and the TargetMachine. See the future
work below.
The downside of this change is that it is very, very verbose. I'm going
to work to improve that, but it is somewhat an implementation necessity
in C++ to do type erasure. =/ I discussed this design really extensively
with Eric and Hal prior to going down this path, and afterward showed
them the result. No one was really thrilled with it, but there doesn't
seem to be a substantially better alternative. Using a base class and
virtual method dispatch would make the code much shorter, but as
discussed in the update to the programmer's manual and elsewhere,
a polymorphic interface feels like the more principled approach even if
this is perhaps the least compelling example of it. ;]
Ultimately, there is still a lot more to be done here, but this was the
huge chunk that I couldn't really split things out of because this was
the interface change to TTI. I've tried to minimize all the other parts
of this. The follow up work should include at least:
1) Improving the TargetMachine interface by having it directly return
a TTI object. Because we have a non-pass object with value semantics
and an internal type erasure mechanism, we can narrow the interface
of the TargetMachine to *just* do what we need: build and return
a TTI object that we can then insert into the pass pipeline.
2) Make the TTI object be fully specialized for a particular function.
This will include splitting off a minimal form of it which is
sufficient for the inliner and the old pass manager.
3) Add a new pass manager analysis which produces TTI objects from the
target machine for each function. This may actually be done as part
of #2 in order to use the new analysis to implement #2.
4) Work on narrowing the API between TTI and the targets so that it is
easier to understand and less verbose to type erase.
5) Work on narrowing the API between TTI and its clients so that it is
easier to understand and less verbose to forward.
6) Try to improve the CRTP-based delegation. I feel like this code is
just a bit messy and exacerbating the complexity of implementing
the TTI in each target.
Many thanks to Eric and Hal for their help here. I ended up blocked on
this somewhat more abruptly than I expected, and so I appreciate getting
it sorted out very quickly.
Differential Revision: http://reviews.llvm.org/D7293
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227669 91177308-0d34-0410-b5e6-96231b3b80d8
Now that -mstack-probe-size is piped through to the backend via the function
attribute as on Windows x86, honour the value to permit handling of non-default
values for stack probes. This is needed /Gs with the clang-cl driver or
-mstack-probe-size with the clang driver when targeting Windows on ARM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227667 91177308-0d34-0410-b5e6-96231b3b80d8
Also revert r227489 since it didn't actually fix the thing I thought I
was fixing (since the test case was targeting the wrong architecture
initially). The change might be correct & demonstrated by other test
cases, but it's not a priority for me to find those test cases right
now.
Filed PR22417 for the failure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227632 91177308-0d34-0410-b5e6-96231b3b80d8
Add tie breaker to colorChainSet() sort so that processing order doesn't
depend on std::set order, which depends on pointer order, which is
unstable from run to run.
No test case as this is nearly impossible to reproduce.
Phabricator Review: http://reviews.llvm.org/D7265
Patch by Geoff Berry <gberry@codeaurora.org>!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227606 91177308-0d34-0410-b5e6-96231b3b80d8
If the original FPU specification involved a restricted VFP unit (d16), ensure
that we reset the functionality when we encounter a new FPU type. In
particular, if the user specified vfpv3-d16, but switched to a VFPv3 (which has
32 double precision registers), we would fail to reset the D16 feature, and
treat it as being equivalent to vfpv3-d16.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227603 91177308-0d34-0410-b5e6-96231b3b80d8
In preparation for adding PDB support to LLVM, this moves the
DWARF parsing code to its own subdirectory under DebugInfo, and
renames LLVMDebugInfo to LLVMDebugInfoDWARF.
This is purely a mechanical / build system change.
Differential Revision: http://reviews.llvm.org/D7269
Reviewed by: Eric Christopher
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227586 91177308-0d34-0410-b5e6-96231b3b80d8
The FPU directive permits the user to switch the target FPU, enabling
instructions that would be otherwise unavailable. However, when configuring the
new subtarget features, we would not enable the implied functions for newer
FPUs. This would result in invalid rejection of valid input. Ensure that we
inherit the implied FPU functionality when enabling newer versions of the FPU.
Fortunately, these are mostly hierarchical, unlike the CPUs.
Addresses PR22395.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227584 91177308-0d34-0410-b5e6-96231b3b80d8
analyses back into the LTO code generator.
The pass manager builder (and the transforms library in general)
shouldn't be referencing the target machine at all.
This makes the LTO population work like the others -- the data layout
and target transform info need to be pre-populated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227576 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is needed by the .cprestore assembler directive.
This directive needs to be able to insert an LW instruction after every JALR replacement of a JAL pseudo-instruction
(and never after a JALR which has NOT been a result of a pseudo-instruction replacement).
The problem with using InstAlias for these is that after it replaces the pseudo-instruction, we can't find out if the resulting JALR instruction
was generated by an InstAlias or not, so we don't know whether or not to insert our LW instruction.
By replacing it manually, we know when the pseudo-instruction replacement happens and we can insert the LW instruction correctly.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D5601
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227568 91177308-0d34-0410-b5e6-96231b3b80d8
accumulateAndSortLibcalls in LTOCodeGenerator.cpp collects names of runtime
library functions which are used to identify user-defined functions that should
be protected. Previously, this function would only scan the TargetLowering
object belonging to the "main" subtarget for the library function names. This
commit changes it to scan all per-function subtargets.
Differential Revision: http://reviews.llvm.org/D7275
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227533 91177308-0d34-0410-b5e6-96231b3b80d8
In the large code model, we now put __chkstk in %r11 before calling it.
Refactor the code so that we only do this once. Simplify things by using
__chkstk_ms instead of __chkstk on cygming. We already use that symbol
in the prolog emission, and it simplifies our logic.
Second half of PR18582.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227519 91177308-0d34-0410-b5e6-96231b3b80d8
calls that don't take a Function argument from Mips. Notable
exceptions: the AsmPrinter and MipsTargetObjectFile. The
latter needs to be fixed, and the former will be fixed when the
general AsmPrinter changes happen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227512 91177308-0d34-0410-b5e6-96231b3b80d8
This is just an alias for CALL64pcrel32, and we can just use that opcode
with explicit defs in the MI.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227508 91177308-0d34-0410-b5e6-96231b3b80d8
win64: Call __chkstk through a register with the large code model
Fixes half of PR18582. True dynamic allocas will still have a
CALL64pcrel32 which will fail.
Reviewers: majnemer
Differential Revision: http://reviews.llvm.org/D7267
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227503 91177308-0d34-0410-b5e6-96231b3b80d8
The validation algorithm used an incremental approach, building each
iteration's data structures temporarily, validating them, then
adding them to a global set.
This does not scale well to having multiple sets of Root nodes, as the
set of instructions used in each iteration is the union over all
the root nodes. Therefore, refactor the logic to create a single, simple
container to which later logic then refers. This makes it simpler
control-flow wise to make the creation of the container more complex with
the addition of multiple root sets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227499 91177308-0d34-0410-b5e6-96231b3b80d8
Add tests for the various combines. This should
always be at least cycle neutral on all subtargets for f64,
and faster on some. For f32 we should prefer selecting
v_mad_f32 over v_fma_f32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227484 91177308-0d34-0410-b5e6-96231b3b80d8
The use of the DbgLoc in FastISel is probably something we should fix.
It's prone to leaking the wrong location into instructions - we should
have a clear chain of custody from the debug location of an IR
Instruction to that of a MachineInstr to avoid such leakage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227481 91177308-0d34-0410-b5e6-96231b3b80d8
Any code creating an MCSectionELF knows ELF and already provides the flags.
SectionKind is an abstraction used by common code that uses a plain
MCSection.
Use the flags to compute the SectionKind. This removes a lot of
guessing and boilerplate from the MCSectionELF construction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227476 91177308-0d34-0410-b5e6-96231b3b80d8
For large stack offsets the compiler generates multiple immediate mode
sub/add instructions in the prologue/epilogue. This patch makes the
compiler place the final amount to be added/subtracted into a register,
which is then added/substracted with a single operation.
Differential Revision: http://reviews.llvm.org/D7226
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227458 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Nemanja Ivanovic.
As was uncovered by the failing test case (when run on non-PPC
platforms), the feature set when compiling with -march=ppc64le was not
being picked up. This change ensures that if the -mcpu option is not
specified, the correct feature set is picked up regardless of whether
we are on PPC or not.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227455 91177308-0d34-0410-b5e6-96231b3b80d8
reroll() was slightly monolithic and a pain to modify. Refactor
a bunch of its state from local variables to member variables
of a helper class, and do some trivial simplification while we're
there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227439 91177308-0d34-0410-b5e6-96231b3b80d8
ELF has support for sections that can be split into fixed size or
null terminated entities.
Since these sections can be split by the linker, it is not necessary
to split them in codegen.
This reduces the combined .o size in a llvm+clang build from
202,394,570 to 173,819,098 bytes.
The time for linking clang with gold (on a VM, on a laptop) goes
from 2.250089985 to 1.383001792 seconds.
The flip side is the size of rodata in clang goes from 10,926,785
to 10,929,345 bytes.
The increase seems to be because of http://sourceware.org/bugzilla/show_bug.cgi?id=17902.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227431 91177308-0d34-0410-b5e6-96231b3b80d8
This has the nice secondary effect of allowing LLVM to continue to build
for targets without __thread or thread_local support to continue to work
so long as they build without support for backtraces.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227423 91177308-0d34-0410-b5e6-96231b3b80d8
entirely when threads are not enabled. This should allow anyone who
needs to bootstrap or cope with a host loader without TLS support to
limp along without threading support.
There is still some bug in the PPC TLS stuff that is not worked around.
I'm getting access to a machine to reproduce and debug this further.
There is some chance that I'll have to add a terrible workaround for
PPC.
There is also some problem with iOS, but I have no ability to really
evaluate what the issue is there. I'm leaving it to folks maintaining
that platform to suggest a path forward -- personally I don't see any
useful path forward that supports threading in LLVM but does so without
support for *very basic* TLS. Note that we don't need more than some
pointers, and we don't need constructors, destructors, or any of the
other fanciness which remains widely unimplemented.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227411 91177308-0d34-0410-b5e6-96231b3b80d8
If the personality is not a recognized MSVC personality function, this
pass delegates to the dwarf EH preparation pass. This chaining supports
people on *-windows-itanium or *-windows-gnu targets.
Currently this recognizes some personalities used by MSVC and turns
resume instructions into traps to avoid link errors. Even if cleanups
are not used in the source program, LLVM requires the frontend to emit a
code path that resumes unwinding after an exception. Clang does this,
and we get unreachable resume instructions. PR20300 covers cleaning up
these unreachable calls to resume.
Reviewers: majnemer
Differential Revision: http://reviews.llvm.org/D7216
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227405 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by: Igor Laevsky <igor@azulsystems.com>
"Currently SplitBlockPredecessors generates incorrect code in case if basic block we are going to split has a landingpad. Also seems like it is fairly common case among it's users to conditionally call either SplitBlockPredecessors or SplitLandingPadPredecessors. Because of this I think it is reasonable to add this condition directly into SplitBlockPredecessors."
Differential Revision: http://reviews.llvm.org/D7157
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227390 91177308-0d34-0410-b5e6-96231b3b80d8
Sadly, this precludes optimizing it down to initial-exec or local-exec
when statically linking, and in general makes the code slower on PPC 64,
but there's nothing else for it until we can arrange to produce the
correct bits for the linker.
Lots of thanks to Ulirch for tracking this down and Bill for working on
the long-term fix to LLVM so that we can relegate this to old host
clang versions.
I'll be watching the PPC build bots to make sure this effectively
revives them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227352 91177308-0d34-0410-b5e6-96231b3b80d8
This is a refactoring to restructure the single user of performCustomLowering as a specific lowering pass and remove the custom lowering hook entirely.
Before this change, the LowerIntrinsics pass (note to self: rename!) was essentially acting as a pass manager, but without being structured in terms of passes. Instead, it proxied calls to a set of GCStrategies internally. This adds a lot of conceptual complexity (i.e. GCStrategies are stateful!) for very little benefit. Since there's been interest in keeping the ShadowStackGC working, I extracting it's custom lowering pass into a dedicated pass and just added that to the pass order. It will only run for functions which opt-in to that gc.
I wasn't able to find an easy way to preserve the runtime registration of custom lowering functionality. Given that no user of this exists that I'm aware of, I made the choice to just remove that. If someone really cares, we can look at restoring it via dynamic pass registration in the future.
Note that despite the large diff, none of the lowering code actual changes. I added the framing needed to make it a pass and rename the class, but that's it.
Differential Revision: http://reviews.llvm.org/D7218
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227351 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The primary goal of this patch is to remove the need for MarkOptionsChanged(). That goal is accomplished by having addOption and removeOption properly sort the options.
This patch puts the new add and remove functionality on a CommandLineParser class that is a placeholder. Some of the functionality in this class will need to be merged into the OptionRegistry, and other bits can hopefully be in a better abstraction.
This patch also removes the RegisteredOptionList global, and the need for cl::Option objects to be linked list nodes.
The changes in CommandLineTest.cpp are required because these changes shift when we validate that options are not duplicated. Before this change duplicate options were only found during certain cl API calls (like cl::ParseCommandLine). With this change duplicate options are found during option construction.
Reviewers: dexonsmith, chandlerc, pete
Reviewed By: pete
Subscribers: pete, majnemer, llvm-commits
Differential Revision: http://reviews.llvm.org/D7132
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227345 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
MetadataAsValue uses a canonical format that strips the MDNode if it
contains only a single constant value. This triggers an assertion when
trying to cast the value to a MDNode.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7165
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227319 91177308-0d34-0410-b5e6-96231b3b80d8
Reduce integer multiplication by a constant of the form k*2^c, where k is in {3,5,9} into a lea + shl. Previously it was only done for imulq on 64-bit platforms, but it makes sense for imull and 32-bit as well.
Differential Revision: http://reviews.llvm.org/D7196
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227308 91177308-0d34-0410-b5e6-96231b3b80d8
This includes two things:
1) Fix TCRETURNdi and TCRETURN64di patterns to check the right thing (LP64 as opposed to target bitness).
2) Allow LEA64_32 in MatchingStackOffset.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227307 91177308-0d34-0410-b5e6-96231b3b80d8
By Asaf Badouh and Elena Demikhovsky
Added special nodes for rounding: FMADD_RND, FMSUB_RND..
It will prevent merge between nodes with rounding and other standard nodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227303 91177308-0d34-0410-b5e6-96231b3b80d8
tracing code.
Managed static was just insane overhead for this. We took memory fences
and external function calls in every path that pushed a pretty stack
frame. This includes a multitude of layers setting up and tearing down
passes, the parser in Clang, everywhere. For the regression test suite
or low-overhead JITs, this was contributing to really significant
overhead.
Even the LLVM ThreadLocal is really overkill here because it uses
pthread_{set,get}_specific logic, and has careful code to both allocate
and delete the thread local data. We don't actually want any of that,
and this code in particular has problems coping with deallocation. What
we want is a single TLS pointer that is valid to use during global
construction and during global destruction, any time we want. That is
exactly what every host compiler and OS we use has implemented for
a long time, and what was standardized in C++11. Even though not all of
our host compilers support the thread_local keyword, we can directly use
the platform-specific keywords to get the minimal functionality needed.
Provided this limited trial survives the build bots, I will move this to
Compiler.h so it is more widely available as a light weight if limited
alternative to the ThreadLocal class. Many thanks to David Majnemer for
helping me think through the implications across platforms and craft the
MSVC-compatible syntax.
The end result is *substantially* faster. When running llc in a tight
loop over a small IR file targeting the aarch64 backend, this improves
its performance by over 10% for me. It also seems likely to fix the
remaining regressions seen by JIT users with threading enabled.
This may actually have more impact on real-world compile times due to
the use of the pretty stack tracing utility throughout the rest of Clang
or LLVM, but I've not collected any detailed measurements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227300 91177308-0d34-0410-b5e6-96231b3b80d8
querying of the pass registry.
The pass manager relies on the static registry of PassInfo objects to
perform all manner of its functionality. I don't understand why it does
much of this. My very vague understanding is that this registry is
touched both during static initialization *and* while each pass is being
constructed. As a consequence it is hard to make accessing it not
require a acquiring some lock. This lock ends up in the hot path of
setting up, tearing down, and invaliditing analyses in the legacy pass
manager.
On most systems you can observe this as a non-trivial % of the time
spent in 'ninja check-llvm'. However, I haven't really seen it be more
than 1% in extreme cases of compiling more real-world software,
including LTO.
Unfortunately, some of the GPU JITs are seeing this taking essentially
all of their time because they have very small IR running through
a small pass pipeline very many times (at least, this is the vague
understanding I have of it).
This patch tries to minimize the cost of looking up PassInfo objects by
leveraging the fact that the objects themselves are immutable and they
are allocated separately on the heap and so don't have their address
change. It also requires a change I made the last time I tried to debug
this problem which removed the ability to de-register a pass from the
registry. This patch creates a single access path to these objects
inside the PMTopLevelManager which memoizes the result of querying the
registry. This is somewhat gross as I don't really know if
PMTopLevelManager is the *right* place to put it, and I dislike using
a mutable member to memoize things, but it seems to work.
For long-lived pass managers this should completely eliminate
the cost of acquiring locks to look into the pass registry once the
memoized cache is warm. For 'ninja check' I measured about 1.5%
reduction in CPU time and in total time on a machine with 32 hardware
threads. For normal compilation, I don't know how much this will help,
sadly. We will still pay the cost while we populate the memoized cache.
I don't think it will hurt though, and for LTO or compiles with many
small functions it should still be a win. However, for tight loops
around a pass manager with many passes and small modules, this will help
tremendously. On the AArch64 backend I saw nearly 50% reductions in time
to complete 2000 cycles of spinning up and tearing down the pipeline.
Measurements from Owen of an actual long-lived pass manager show more
along the lines of 10% improvements.
Differential Revision: http://reviews.llvm.org/D7213
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227299 91177308-0d34-0410-b5e6-96231b3b80d8
This patch folds fcmp in some cases of interest in Julia. The patch adds a function CannotBeOrderedLessThanZero that returns true if a value is provably not less than zero. I.e. the function returns true if the value is provably -0, +0, positive, or a NaN. The patch extends InstructionSimplify.cpp to fold instances of fcmp where:
- the predicate is olt or uge
- the first operand is provably not less than zero
- the second operand is zero
The motivation for handling these cases optimizing away domain checks for sqrt in Julia for common idioms such as sqrt(x*x+y*y)..
http://reviews.llvm.org/D6972
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227298 91177308-0d34-0410-b5e6-96231b3b80d8
abomination.
For starters, this API is incredibly slow. In order to lookup the name
of a pass it must take a memory fence to acquire a pointer to the
managed static pass registry, and then potentially acquire locks while
it consults this registry for information about what passes exist by
that name. This stops the world of LLVMs in your process no matter
how little they cared about the result.
To make this more joyful, you'll note that we are preserving many passes
which *do not exist* any more, or are not even analyses which one might
wish to have be preserved. This means we do all the work only to say
"nope" with no error to the user.
String-based APIs are a *bad idea*. String-based APIs that cannot
produce any meaningful error are an even worse idea. =/
I have a patch that simply removes this API completely, but I'm hesitant
to commit it as I don't really want to perniciously break out-of-tree
users of the old pass manager. I'd rather they just have to migrate to
the new one at some point. If others disagree and would like me to kill
it with fire, just say the word. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227294 91177308-0d34-0410-b5e6-96231b3b80d8
This has wider implications than I expected when I reviewed the patch: It can
cause JIT crashes where clients have used the default value for AbortOnFailure
during symbol lookup. I'm currently investigating alternative approaches and I
hope to have this back in tree soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227287 91177308-0d34-0410-b5e6-96231b3b80d8
This commit creates infinite loop in DAG combine for in the LLVM test-suite
for aarch64 with mcpu=cylcone (just having neon may be enough to expose this).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227272 91177308-0d34-0410-b5e6-96231b3b80d8
COMDATs must be identically named to the symbol. When support for COMDATs was
introduced, the symbol rewriter was not updated, resulting in rewriting failing
for symbols which were placed into COMDATs. This corrects the behaviour and
adds test cases for this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227261 91177308-0d34-0410-b5e6-96231b3b80d8
This contains the changes from r227148 & r227154, and also fixes to the test case to properly clean up the stack options.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227255 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
A simple genetic in-process coverage-guided fuzz testing library.
I've used this fuzzer to test clang-format
(it found 12+ bugs, thanks djasper@ for the fixes!)
and it may also help us test other parts of LLVM.
So why not keep it in the LLVM repository?
I plan to add the cmake build rules later (in a separate patch, if that's ok)
and also add a clang-format-fuzzer target.
See README.txt for details.
Test Plan: Tests will follow separately.
Reviewers: djasper, chandlerc, rnk
Reviewed By: rnk
Subscribers: majnemer, ygribov, dblaikie, llvm-commits
Differential Revision: http://reviews.llvm.org/D7184
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227252 91177308-0d34-0410-b5e6-96231b3b80d8
This was introduced in a faulty refactoring (r225640, mea culpa):
the tests weren't testing the return values, so, for both
__strcpy_chk and __stpcpy_chk, we would return the end of the
buffer (matching stpcpy) instead of the beginning (for strcpy).
The root cause was the prefix "__" being ignored when comparing,
which made us always pick LibFunc::stpcpy_chk.
Pass the LibFunc::Func directly to avoid this kind of error.
Also, make the testcases as explicit as possible to prevent this.
The now-useful testcases expose another, entangled, stpcpy problem,
with the further simplification. This was introduced in a
refactoring (r225640) to match the original behavior.
However, this leads to problems when successive simplifications
generate several similar instructions, none of which are removed
by the custom replaceAllUsesWith.
For instance, InstCombine (the main user) doesn't erase the
instruction in its custom RAUW. When trying to simplify say
__stpcpy_chk:
- first, an stpcpy is created (fortified simplifier),
- second, a memcpy is created (normal simplifier), but the
stpcpy call isn't removed.
- third, InstCombine later revisits the instructions,
and simplifies the first stpcpy to a memcpy. We now have
two memcpys.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227250 91177308-0d34-0410-b5e6-96231b3b80d8
Splitting a loop to make range checks redundant is profitable only if
the range check "never" fails. Make this fact a part of recognizing a
range check -- a branch is a range check only if it is expected to
pass (via branch_weights metadata).
Differential Revision: http://reviews.llvm.org/D7192
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227249 91177308-0d34-0410-b5e6-96231b3b80d8
This patch resolves part of PR21711 ( http://llvm.org/bugs/show_bug.cgi?id=21711 ).
The 'f3' test case in that report presents a situation where we have two 128-bit
stores extracted from a 256-bit source vector.
Instead of producing this:
vmovaps %xmm0, (%rdi)
vextractf128 $1, %ymm0, 16(%rdi)
This patch merges the 128-bit stores into a single 256-bit store:
vmovups %ymm0, (%rdi)
Differential Revision: http://reviews.llvm.org/D7208
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227242 91177308-0d34-0410-b5e6-96231b3b80d8
If a memory access is unaligned, emit __tsan_unaligned_read/write
callbacks instead of __tsan_read/write.
Required to change semantics of __tsan_unaligned_read/write to not do the user memory.
But since they were unused (other than through __sanitizer_unaligned_load/store) this is fine.
Fixes long standing issue 17:
https://code.google.com/p/thread-sanitizer/issues/detail?id=17
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227231 91177308-0d34-0410-b5e6-96231b3b80d8
Support weak symbols by first looking up if there is an externally visible symbol we can find,
and only if that fails using the one in the object file we're loading.
Reviewed By: lhames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6950
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227228 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Basically all other methods that look up functions by name skip them if they are mere declarations.
Do the same in FindFunctionNamed.
Reviewers: lhames
Reviewed By: lhames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7068
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227227 91177308-0d34-0410-b5e6-96231b3b80d8
Only pseudos have patterns on them.
Also don't set the asm string for VINTRP_Pseudo. All pseudos should have empty
asm.
This matches what all other multiclasses do.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227212 91177308-0d34-0410-b5e6-96231b3b80d8
Each class is split into two: one adds let statements around non-pseudos,
and the other one specifies the parameters.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227211 91177308-0d34-0410-b5e6-96231b3b80d8
This defines the SI versions only, so it shouldn't change anything.
There are no changes other than using the new multiclasses, adding missing
mayLoad/mayStore, and formatting fixes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227208 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches the Instruction Combiner how to fold a cttz/ctlz followed by
a icmp plus select into a single cttz/ctlz with flag 'is_zero_undef' cleared.
Added test InstCombine/select-cmp-cttz-ctlz.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227197 91177308-0d34-0410-b5e6-96231b3b80d8
Sanitizer coverage constructor must run after asan constructor (for each DSO).
Bump constructor priority to guarantee that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227195 91177308-0d34-0410-b5e6-96231b3b80d8
When lowering memcpy, memset or memmove, this assert checks whether the pointer
operands are in an address space < 256 which means "user defined address space"
on X86. However, this notion of "user defined address space" does not exist
for other targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227191 91177308-0d34-0410-b5e6-96231b3b80d8
LoopRotate wanted to avoid live range interference by looking at the
uses of a Value in the loop latch and seeing if any lied outside of the
loop. We would wrongly perform this operation on Constants.
This fixes PR22337.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227171 91177308-0d34-0410-b5e6-96231b3b80d8
r227148 added test CommandLineTest.HideUnrelatedOptionsMulti which repeatedly
outputs two following lines:
-tool: CommandLine Error: Option 'test-option-1' registered more than once!
-tool: CommandLine Error: Option 'test-option-2' registered more than once!
r227154 depends on changes from r227148
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227167 91177308-0d34-0410-b5e6-96231b3b80d8
object that manages a single run of this pass.
This was already essentially how it worked. Within the run function, it
would point members at *stack local* allocations that were only live for
a single run. Instead, it seems much cleaner to have a utility object
whose lifetime is clearly bounded by the run of the pass over the
function and can use member variables in a more direct way.
This also makes it easy to plumb the analyses used into it from the pass
and will make it re-usable with the new pass manager.
No functionality changed here, its just a refactoring.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227162 91177308-0d34-0410-b5e6-96231b3b80d8
