This makes reassociate realize that loads should be treated as unmovable, and
gives distinct ranks to distinct values defined in the same basic block, allowing
reassociate to do its thing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21783 91177308-0d34-0410-b5e6-96231b3b80d8
in. This tends to get cases like this:
X = cast ubyte to int
Y = shr int X, ...
Tested by: shift.ll:test24
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21775 91177308-0d34-0410-b5e6-96231b3b80d8
of trying to do local reassociation tweaks at each level, only process an expression
tree once (at its root). This does not improve the reassociation pass in any real way.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21768 91177308-0d34-0410-b5e6-96231b3b80d8
strlen(x) != 0 -> *x != 0
strlen(x) == 0 -> *x == 0
* Change nested statistics to use style of other LLVM statistics so that
only the name of the optimization (simplify-libcalls) is used as the
statistic name, and the description indicates which specific all is
optimized. Cuts down on some redundancy and saves a few bytes of space.
* Make note of stpcpy optimization that could be done.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21766 91177308-0d34-0410-b5e6-96231b3b80d8
the result, turn signed shift rights into unsigned shift rights if possible.
This leads to later simplification and happens *often* in 176.gcc. For example,
this testcase:
struct xxx { unsigned int code : 8; };
enum codes { A, B, C, D, E, F };
int foo(struct xxx *P) {
if ((enum codes)P->code == A)
bar();
}
used to be compiled to:
int %foo(%struct.xxx* %P) {
%tmp.1 = getelementptr %struct.xxx* %P, int 0, uint 0 ; <uint*> [#uses=1]
%tmp.2 = load uint* %tmp.1 ; <uint> [#uses=1]
%tmp.3 = cast uint %tmp.2 to int ; <int> [#uses=1]
%tmp.4 = shl int %tmp.3, ubyte 24 ; <int> [#uses=1]
%tmp.5 = shr int %tmp.4, ubyte 24 ; <int> [#uses=1]
%tmp.6 = cast int %tmp.5 to sbyte ; <sbyte> [#uses=1]
%tmp.8 = seteq sbyte %tmp.6, 0 ; <bool> [#uses=1]
br bool %tmp.8, label %then, label %UnifiedReturnBlock
Now it is compiled to:
%tmp.1 = getelementptr %struct.xxx* %P, int 0, uint 0 ; <uint*> [#uses=1]
%tmp.2 = load uint* %tmp.1 ; <uint> [#uses=1]
%tmp.2 = cast uint %tmp.2 to sbyte ; <sbyte> [#uses=1]
%tmp.8 = seteq sbyte %tmp.2, 0 ; <bool> [#uses=1]
br bool %tmp.8, label %then, label %UnifiedReturnBlock
which is the difference between this:
foo:
subl $4, %esp
movl 8(%esp), %eax
movl (%eax), %eax
shll $24, %eax
sarl $24, %eax
testb %al, %al
jne .LBBfoo_2
and this:
foo:
subl $4, %esp
movl 8(%esp), %eax
movl (%eax), %eax
testb %al, %al
jne .LBBfoo_2
This occurs 3243 times total in the External tests, 215x in povray,
6x in each f2c'd program, 1451x in 176.gcc, 7x in crafty, 20x in perl,
25x in gap, 3x in m88ksim, 25x in ijpeg.
Maybe this will cause a little jump on gcc tommorow :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21715 91177308-0d34-0410-b5e6-96231b3b80d8
This implements set.ll:test20.
This triggers 2x on povray, 9x on mesa, 11x on gcc, 2x on crafty, 1x on eon,
6x on perlbmk and 11x on m88ksim.
It allows us to compile these two functions into the same code:
struct s { unsigned int bit : 1; };
unsigned foo(struct s *p) {
if (p->bit)
return 1;
else
return 0;
}
unsigned bar(struct s *p) { return p->bit; }
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21690 91177308-0d34-0410-b5e6-96231b3b80d8
library function:
isdigit(chr) -> 0 or 1 if chr is constant
isdigit(chr) -> chr - '0' <= 9 otherwise
Although there are many calls to isdigit in llvm-test, most of them are
compiled away by macros leaving only this:
2 MultiSource/Applications/hexxagon
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21688 91177308-0d34-0410-b5e6-96231b3b80d8
actual spec (int -> uint)
* Add the ability to get/cache the strlen function prototype.
* Make sure generated values are appropriately named for debugging purposes
* Add the SPrintFOptimiation for 4 casts of sprintf optimization:
sprintf(str,cstr) -> llvm.memcpy(str,cstr) (if cstr has no %)
sprintf(str,"") -> store sbyte 0, str
sprintf(str,"%s",src) -> llvm.memcpy(str,src) (if src is constant)
sprintf(str,"%c",chr) -> store chr, str ; store sbyte 0, str+1
The sprintf optimization didn't fire as much as I had hoped:
2 MultiSource/Applications/SPASS
5 MultiSource/Benchmarks/McCat/18-imp
22 MultiSource/Benchmarks/Prolangs-C/TimberWolfMC
1 MultiSource/Benchmarks/Prolangs-C/assembler
6 MultiSource/Benchmarks/Prolangs-C/unix-smail
2 MultiSource/Benchmarks/mediabench/mpeg2/mpeg2dec
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21679 91177308-0d34-0410-b5e6-96231b3b80d8
population (ctpop). Generic lowering is implemented, however only promotion
is implemented for SelectionDAG at the moment.
More coming soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21676 91177308-0d34-0410-b5e6-96231b3b80d8
Neither of these activated as many times as was hoped:
strchr:
9 MultiSource/Applications/siod
1 MultiSource/Applications/d
2 MultiSource/Prolangs-C/archie-client
1 External/SPEC/CINT2000/176.gcc/176.gcc
llvm.memset:
no hits
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21669 91177308-0d34-0410-b5e6-96231b3b80d8
strings passed to Statistic's constructor are not destructable. The stats
are printed during static destruction and the SimplifyLibCalls module was
getting destructed before the statistics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21661 91177308-0d34-0410-b5e6-96231b3b80d8
this constmul code is still buggy though, so beware. mul by 7427 is currently
broken, for example. will fix it when I get a moment :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21652 91177308-0d34-0410-b5e6-96231b3b80d8
Changed dependence analyzer to only use dep distances of 2 or less.
This is experimental.
Changed MSchedGraph to be able to represent more then one BB (first steps).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21641 91177308-0d34-0410-b5e6-96231b3b80d8
type be obtained from a CallInst we're optimizing.
* Make it possible for getConstantStringLength to return the ConstantArray
that it extracts in case the content is needed by an Optimization.
* Implement the strcmp optimization
* Implement the toascii optimization
This pass is now firing several to many times in the following MultiSource
tests:
Applications/Burg - 7 (strcat,strcpy)
Applications/siod - 13 (strcat,strcpy,strlen)
Applications/spiff - 120 (exit,fputs,strcat,strcpy,strlen)
Applications/treecc - 66 (exit,fputs,strcat,strcpy)
Applications/kimwitu++ - 34 (strcmp,strcpy,strlen)
Applications/SPASS - 588 (exit,fputs,strcat,strcpy,strlen)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21626 91177308-0d34-0410-b5e6-96231b3b80d8
sinh, cosh, etc.
* Make the name comparisons for the fp libcalls a little more efficient by
switching on the first character of the name before doing comparisons.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21611 91177308-0d34-0410-b5e6-96231b3b80d8
(TRUNK)Stores and (EXT|ZEXT|SEXT)Loads have an extra SDOperand which is a SrcValueSDNode which contains the Value*. Note that if the operation is introduced by the backend, it will still have the operand, but the value* will be null.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21599 91177308-0d34-0410-b5e6-96231b3b80d8
* Name the instructions by appending to name of original
* Factor common part out of a switch statement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21597 91177308-0d34-0410-b5e6-96231b3b80d8
* Correct stale documentation in a few places
* Re-order the file to better associate things and reduce line count
* Make the pass thread safe by caching the Function* objects needed by the
optimizers in the pass object instead of globally.
* Provide the SimplifyLibCalls pass object to the optimizer classes so they
can access cached Function* objects and TargetData info
* Make sure the pass resets its cache if the Module passed to runOnModule
changes
* Rename CallOptimizer LibCallOptimization. All the classes are named
*Optimization while the objects are *Optimizer.
* Don't cache Function* in the optimizer objects because they could be used
by multiple PassManager's running in multiple threads
* Add an optimization for strcpy which is similar to strcat
* Add a "TODO" list at the end of the file for ideas on additional libcall
optimizations that could be added (get ideas from other compilers).
Sorry for the huge diff. Its mostly reorganization of code. That won't
happen again as I believe the design and infrastructure for this pass is
now done or close to it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21589 91177308-0d34-0410-b5e6-96231b3b80d8
call to them into an 'unreachable' instruction.
This triggers a bunch of times, particularly on gcc:
gzip: 36
gcc: 601
eon: 12
bzip: 38
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21587 91177308-0d34-0410-b5e6-96231b3b80d8
* MemCpyOptimization can only be optimized if the 3rd and 4th arguments are
constants and we weren't checking for that.
* The result of llvm.memcpy (and llvm.memmove) is void* not sbyte*, put in
a cast.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21570 91177308-0d34-0410-b5e6-96231b3b80d8
* Have the SimplifyLibCalls pass acquire the TargetData and pass it down to
the optimization classes so they can use it to make better choices for
the signatures of functions, etc.
* Rearrange the code a little so the utility functions are closer to their
usage and keep the core of the pass near the top of the files.
* Adjust the StrLen pass to get/use the correct prototype depending on the
TargetData::getIntPtrType() result. The result of strlen is size_t which
could be either uint or ulong depending on the platform.
* Clean up some coding nits (cast vs. dyn_cast, remove redundant items from
a switch, etc.)
* Implement the MemMoveOptimization as a twin of MemCpyOptimization (they
only differ in name).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21569 91177308-0d34-0410-b5e6-96231b3b80d8
named getConstantStringLength. This is the common part of StrCpy and
StrLen optimizations and probably several others, yet to be written. It
performs all the validity checks for looking at constant arrays that are
supposed to be null-terminated strings and then computes the actual
length of the string.
* Implement the MemCpyOptimization class. This just turns memcpy of 1, 2, 4
and 8 byte data blocks that are properly aligned on those boundaries into
a load and a store. Much more could be done here but alignment
restrictions and lack of knowledge of the target instruction set prevent
use from doing significantly more. That will have to be delegated to the
code generators as they lower llvm.memcpy calls.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21562 91177308-0d34-0410-b5e6-96231b3b80d8
subtracts. This is a very rough and nasty implementation of Lefevre's
"pattern finding" algorithm. With a few small changes though, it should
end up beating most other methods in common use, regardless of the size
of the constant (currently, it's often one or two shifts worse)
TODO: rewrite it so it's not hideously ugly (this is a translation from
perl, which doesn't help ;)
bypass most of it for multiplies by 2^n+1
(eventually) teach it that some combinations of shift+add are
cheaper than others (e.g. shladd on ia64, scaled adds on alpha)
get it to try multiple booth encodings in search of the cheapest
routine
make it work for negative constants
This is hacked up as a DAG->DAG transform, so once I clean it up I hope
it'll be pulled out of here and put somewhere else. The only thing backends
should really have to worry about for now is where to draw the line
between using this code vs. going ahead and doing an integer multiply
anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21560 91177308-0d34-0410-b5e6-96231b3b80d8
* Factor out commonalities between StrLenOptimization and StrCatOptimization
* Make sure that signatures return sbyte* not void*
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21559 91177308-0d34-0410-b5e6-96231b3b80d8
* Change signatures of OptimizeCall and ValidateCalledFunction so they are
non-const, allowing the optimization object to be modified. This is in
support of caching things used across multiple calls.
* Provide two functions for constructing and caching function types
* Modify the StrCatOptimization to cache Function objects for strlen and
llvm.memcpy so it doesn't regenerate them on each call site. Make sure
these are invalidated each time we start the pass.
* Handle both a GEP Instruction and a GEP ConstantExpr
* Add additional checks to make sure we really are dealing with an arary of
sbyte and that all the element initializers are ConstantInt or
ConstantExpr that reduce to ConstantInt.
* Make sure the GlobalVariable is constant!
* Don't use ConstantArray::getString as it can fail and it doesn't give us
the right thing. We must check for null bytes in the middle of the array.
* Use llvm.memcpy instead of memcpy so we can factor alignment into it.
* Don't use void* types in signatures, replace with sbyte* instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21555 91177308-0d34-0410-b5e6-96231b3b80d8
* Don't use std::string for the function names, const char* will suffice
* Allow each CallOptimizer to validate the function signature before
doing anything
* Repeatedly loop over the functions until an iteration produces
no more optimizations. This allows one optimization to insert a
call that is optimized by another optimization.
* Implement the ConstantArray portion of the StrCatOptimization
* Provide a template for the MemCpyOptimization
* Make ExitInMainOptimization split the block, not delete everything
after the return instruction.
(This covers revision 1.3 and 1.4, as the 1.3 comments were botched)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21548 91177308-0d34-0410-b5e6-96231b3b80d8
* Fix comments at top of file
* Change algorithm for running the call optimizations from n*n to something
closer to n.
* Use a hash_map to store and lookup the optimizations since there will
eventually (or potentially) be a large number of them. This gets lookup
based on the name of the function to O(1). Each CallOptimizer now has a
std::string member named func_name that tracks the name of the function
that it applies to. It is this string that is entered into the hash_map
for fast comparison against the function names encountered in the module.
* Cleanup some style issues pertaining to iterator invalidation
* Don't pass the Function pointer to the OptimizeCall function because if
the optimization needs it, it can get it from the CallInst passed in.
* Add the skeleton for a new CallOptimizer, StrCatOptimizer which will
eventually replace strcat's of constant strings with direct copies.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21526 91177308-0d34-0410-b5e6-96231b3b80d8
calls. The pass visits all external functions in the module and determines
if such function calls can be optimized. The optimizations are specific to
the library calls involved. This initial version only optimizes calls to
exit(3) when they occur in main(): it changes them to ret instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21522 91177308-0d34-0410-b5e6-96231b3b80d8
Completely rework the 'setcc (cast x to larger), y' code. This code has
the advantage of implementing setcc.ll:test19 (being more general than
the previous code) and being correct in all cases.
This allows us to unxfail 2004-11-27-SetCCForCastLargerAndConstant.ll,
and close PR454.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21491 91177308-0d34-0410-b5e6-96231b3b80d8
variable TARGETS_TO_BUILD is used to determine which targets in lib/Target
are built and which libraries are linked into llc. This effectively
implements the feature. One item remains: disabling targets in the dejagnu
test suite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21450 91177308-0d34-0410-b5e6-96231b3b80d8
printf format strings and other stuff. Instead of generating this:
movl $l1__2E_str_1, %eax
movl %eax, (%esp)
we now emit:
movl $l1__2E_str_1, (%esp)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21406 91177308-0d34-0410-b5e6-96231b3b80d8
bool %test(int %X) {
%Y = and int %X, 8
%Z = setne int %Y, 0
ret bool %Z
}
we now generate this:
rlwinm r2, r3, 0, 28, 28
srwi r3, r2, 3
instead of this:
rlwinm r2, r3, 0, 28, 28
srwi r2, r2, 3
rlwinm r3, r2, 0, 31, 31
I'll leave it to Nate to get it down to one instruction. :)
---------------------------------------------------------------------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21391 91177308-0d34-0410-b5e6-96231b3b80d8
Standardize the error messages to be in "path: what failed: why" format.
Also attempt to use the correct errno to ThrowErrno in situations where
the errno value is erased by subsequent system calls.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21385 91177308-0d34-0410-b5e6-96231b3b80d8
Allow the ThrowErrno function to optionally accept an error number
parameter so that callers can specify the error number to be used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21384 91177308-0d34-0410-b5e6-96231b3b80d8
Make IPSCCP strip off dead constant exprs that are using functions, making
them appear as though their address is taken. This allows us to propagate
some more pool descriptors, lowering the overhead of pool alloc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21363 91177308-0d34-0410-b5e6-96231b3b80d8
register. Added support in the .td file for the g5-specific variant
of cr -> gpr moves that executes faster, but we currently don't
generate it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21314 91177308-0d34-0410-b5e6-96231b3b80d8
Add new ppc beta option related to using condition registers
Make pattern isel control flag (-enable-pattern-isel) global and tristate
0 == off
1 == on
2 == target default
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21309 91177308-0d34-0410-b5e6-96231b3b80d8
This pass forward branches through conditions when it can show that the
conditions is either always true or false for a predecessor. This currently
only handles the most simple cases of this, but is successful at threading
across 2489 branches and 65 switch instructions in 176.gcc, which isn't bad.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21306 91177308-0d34-0410-b5e6-96231b3b80d8
This can generate considerably shorter code, reducing the size of crafty
by almost 1%. Also fix the printing of mcrf. The code is currently
disabled until it gets a bit more testing, but should work as-is.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21298 91177308-0d34-0410-b5e6-96231b3b80d8
now gone. Next step is to get rid of the remaining ones and then start
allocating bools to CRs where appropriate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21294 91177308-0d34-0410-b5e6-96231b3b80d8
Move the transform for select (a < 0) ? b : 0 into the dag from ppc isel
Enable the dag to fold and (setcc, 1) -> setcc for targets where setcc
always produces zero or one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21291 91177308-0d34-0410-b5e6-96231b3b80d8
* fold left shifts of 1, 2, 3 or 4 bits into adds
This doesn't save much now, but should get a serious workout once
multiplies by constants get converted to shift/add/sub sequences.
Hold on! :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21282 91177308-0d34-0410-b5e6-96231b3b80d8
0x00000..00FFF..FF
^ ^
^ ^
any number of
0's followed by
some number of
1's
then we use dep.z to just paste zeros over the input. For the special
cases where this is zxt1/zxt2/zxt4, we use those instructions instead,
because we're all about readability!!!
that's what it's about!! readability!
*twitch* ;D
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21279 91177308-0d34-0410-b5e6-96231b3b80d8
like this:
ldah $1,1($31)
lda $1,-1($1)
and $0,$1,$24
instead of this:
zap $0,252,$24
To get this back, the selector should recognize the ISD::AND case where this
happens and emit the appropriate ZAP instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21270 91177308-0d34-0410-b5e6-96231b3b80d8
things like this:
mov r9 = 65535;;
and r8 = r8, r9;;
To be emitted instead of:
zxt2 r8 = r8;;
To get this back, the selector for ISD::AND should recognize this case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21269 91177308-0d34-0410-b5e6-96231b3b80d8
andi instructions instead of rlwinm instructions for zero extend, but they
seem like they would take the same time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21268 91177308-0d34-0410-b5e6-96231b3b80d8
