The form of nops used is CPU-specific (some CPUs, such as the POWER7, have
special group-terminating nops). We probably want a different callback for this
kind of nop insertion (something more like MCAsmBackend::writeNopData), or for
PPC to use a different mechanism for scheduling nops, but this will stop the
test from failing for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225928 91177308-0d34-0410-b5e6-96231b3b80d8
This re-applies r225808, fixed to avoid problems with SDAG dependencies along
with the preceding fix to ScheduleDAGSDNodes::RegDefIter::InitNodeNumDefs.
These problems caused the original regression tests to assert/segfault on many
(but not all) systems.
Original commit message:
This commit does two things:
1. Refactors PPCFastISel to use more of the common infrastructure for call
lowering (this lets us take advantage of this common code for lowering some
common intrinsics, stackmap/patchpoint among them).
2. Adds support for stackmap/patchpoint lowering. For the most part, this is
very similar to the support in the AArch64 target, with the obvious differences
(different registers, NOP instructions, etc.). The test cases are adapted
from the AArch64 test cases.
One difference of note is that the patchpoint call sequence takes 24 bytes, so
you can't use less than that (on AArch64 you can go down to 16). Also, as noted
in the docs, we take the patchpoint address to be the actual code address
(assuming the call is local in the TOC-sharing sense), which should yield
higher performance than generating the full cross-DSO indirect-call sequence
and is likely just as useful for JITed code (if not, we'll change it).
StackMaps and Patchpoints are still marked as experimental, and so this support
is doubly experimental. So go ahead and experiment!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225909 91177308-0d34-0410-b5e6-96231b3b80d8
A pass that adds random noops to X86 binaries to introduce diversity with the goal of increasing security against most return-oriented programming attacks.
Command line options:
-noop-insertion // Enable noop insertion.
-noop-insertion-percentage=X // X% of assembly instructions will have a noop prepended (default: 50%, requires -noop-insertion)
-max-noops-per-instruction=X // Randomly generate X noops per instruction. ie. roll the dice X times with probability set above (default: 1). This doesn't guarantee X noop instructions.
In addition, the following 'quick switch' in clang enables basic diversity using default settings (currently: noop insertion and schedule randomization; it is intended to be extended in the future).
-fdiversify
This is the llvm part of the patch.
clang part: D3393
http://reviews.llvm.org/D3392
Patch by Stephen Crane (@rinon)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225908 91177308-0d34-0410-b5e6-96231b3b80d8
This was already done in clang, this commit now uses the integrated
assembler as default when using LLVM tools directly.
A number of test cases using inline asm had to be adapted, either by
updating the expected output, or by using -no-integrated-as (for such
tests that deliberately use an invalid instruction in inline asm).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225819 91177308-0d34-0410-b5e6-96231b3b80d8
Reverting this while I investiage buildbot failures (segfaulting in
GetCostForDef at ScheduleDAGRRList.cpp:314).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225811 91177308-0d34-0410-b5e6-96231b3b80d8
This commit does two things:
1. Refactors PPCFastISel to use more of the common infrastructure for call
lowering (this lets us take advantage of this common code for lowering some
common intrinsics, stackmap/patchpoint among them).
2. Adds support for stackmap/patchpoint lowering. For the most part, this is
very similar to the support in the AArch64 target, with the obvious differences
(different registers, NOP instructions, etc.). The test cases are adapted
from the AArch64 test cases.
One difference of note is that the patchpoint call sequence takes 24 bytes, so
you can't use less than that (on AArch64 you can go down to 16). Also, as noted
in the docs, we take the patchpoint address to be the actual code address
(assuming the call is local in the TOC-sharing sense), which should yield
higher performance than generating the full cross-DSO indirect-call sequence
and is likely just as useful for JITed code (if not, we'll change it).
StackMaps and Patchpoints are still marked as experimental, and so this support
is doubly experimental. So go ahead and experiment!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225808 91177308-0d34-0410-b5e6-96231b3b80d8
Looking at r225438 inspired me to see how the PowerPC backend handled the
situation (calling a bitcasted TLS global), and it turns out we also produced
an error (cannot select ...). What it means to "call" something that is not a
function is implementation and platform specific, but in the name of doing
something (besides crashing), this makes sure we do what GCC does (treat all
such calls as calls through a function pointer -- meaning that the pointer is
assumed, as is the convention on PPC, to point to a function descriptor
structure holding the actual code address along with the function's TOC pointer
and environment pointer). As GCC does, we now do the same for calling regular
(non-TLS) non-function globals too.
I'm not sure whether this is the most useful way to define the behavior, but at
least we won't be alone.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225617 91177308-0d34-0410-b5e6-96231b3b80d8
This initial implementation of PPCTargetLowering::isZExtFree marks as free
zexts of small scalar loads (that are not sign-extending). This callback is
used by SelectionDAGBuilder's RegsForValue::getCopyToRegs, and thus to
determine whether a zext or an anyext is used to lower illegally-typed PHIs.
Because later truncates of zero-extended values are nops, this allows for the
elimination of later unnecessary truncations.
Fixes the initial complaint associated with PR22120.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225584 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In the previous commit, the register was saved, but space was not allocated.
This resulted in the parameter save area potentially clobbering r30, leading to
nasty results.
Test Plan: Tests updated
Reviewers: hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6906
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225573 91177308-0d34-0410-b5e6-96231b3b80d8
On modern cores with lfiw[az]x, we can fold a sign or zero extension from i32
to i64 into the load necessary for an i64 -> fp conversion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225493 91177308-0d34-0410-b5e6-96231b3b80d8
MachineLICM uses a callback named hasLowDefLatency to determine if an
instruction def operand has a 'low' latency. If all relevant operands have a
'low' latency, the instruction is considered too cheap to hoist out of loops
even in low-register-pressure situations. On PowerPC cores, both the embedded
cores and the others, there is no reason to believe that this is a good choice:
all instructions have a cost inside a loop, and hoisting them when not limited
by register pressure is a reasonable default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225471 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: The PIC additions didn't update the prologue and epilogue code to save and restore r30 (PIC base register). This does that.
Test Plan: Tests updated.
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6876
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225450 91177308-0d34-0410-b5e6-96231b3b80d8
int->fp conversions on PPC must be done through memory loads and stores. On a
modern core, this process begins by storing the int value to memory, then
loading it using a (sometimes special) FP load instruction. Unfortunately, we
would do this even when the value to be converted was itself a load, and we can
just use that same memory location instead of copying it to another first.
There is a slight complication when handling int_to_fp(fp_to_int(x)) pairs,
because the fp_to_int operand has not been lowered when the int_to_fp is being
lowered. We handle this specially by invoking fp_to_int's lowering logic
(partially) and getting the necessary memory location (some trivial refactoring
was done to make this possible).
This is all somewhat ugly, and it would be nice if some later CodeGen stage
could just clean this stuff up, but because doing so would involve modifying
target-specific nodes (or instructions), it is not immediately clear how that
would work.
Also, remove a related entry from the README.txt for which we now generate
reasonable code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225301 91177308-0d34-0410-b5e6-96231b3b80d8
In r225251, I removed an old entry from the README.txt file. While there are
several contributing factors (including pieces in Clang's ABI code), upon
further reflection, the backend part deserves a regression test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225268 91177308-0d34-0410-b5e6-96231b3b80d8
The old target DAG combine that allowed for performing int_to_fp(fp_to_int(x))
without a load/store pair is updated here with support for unsigned integers,
and to support single-precision values without a third rounding step, on newer
cores with the appropriate instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225248 91177308-0d34-0410-b5e6-96231b3b80d8
We now produce the desired code as noted in the README.txt file (no spurious
or). Remove the README entry and improve the regression test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225214 91177308-0d34-0410-b5e6-96231b3b80d8
We now produce the desired code as noted in the README.txt file. Remove the
README entry and add a regression test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225209 91177308-0d34-0410-b5e6-96231b3b80d8
We now produce the desired code as noted in the README.txt file. Remove the
README entry and add a regression test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225205 91177308-0d34-0410-b5e6-96231b3b80d8
Consider this function from our README.txt file:
int foo(int a, int b) { return (a < b) << 4; }
We now explicitly track CR bits by default, so the comment in the README.txt
about not really having a SETCC is no longer accurate, but we did generate this
somewhat silly code:
cmpw 0, 3, 4
li 3, 0
li 12, 1
isel 3, 12, 3, 0
sldi 3, 3, 4
blr
which generates the zext as a select between 0 and 1, and then shifts the
result by a constant amount. Here we preprocess the DAG in order to fold the
results of operations on an extension of an i1 value into the SELECT_I[48]
pseudo instruction when the resulting constant can be materialized using one
instruction (just like the 0 and 1). This was not implemented as a DAGCombine
because the resulting code would have been anti-canonical and depends on
replacing chained user nodes, which does not fit well into the lowering
paradigm. Now we generate:
cmpw 0, 3, 4
li 3, 0
li 12, 16
isel 3, 12, 3, 0
blr
which is less silly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225203 91177308-0d34-0410-b5e6-96231b3b80d8
The 64-bit semantics of cntlzw are not special, the 32-bit population count is
stored as a 64-bit value in the range [0,32]. As a result, it is always zero
extended, and it can be added to the PPCISelDAGToDAG peephole optimization as a
frontier instruction for the removal of unnecessary zero extensions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225192 91177308-0d34-0410-b5e6-96231b3b80d8
lhbrx and lwbrx not only load their data with byte swapping, but also clear the
upper 32 bits (at least). As a result, they can be added to the PPCISelDAGToDAG
peephole optimization as frontier instructions for the removal of unnecessary
zero extensions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225189 91177308-0d34-0410-b5e6-96231b3b80d8
PPC has an instruction for ctlz with defined zero behavior, and our lowering of
cttz (provided by DAGCombine) is also efficient and branchless, so speculating
these makes sense.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225150 91177308-0d34-0410-b5e6-96231b3b80d8
r225135 added the ability to materialize i64 constants using rotations in order
to reduce the instruction count. Sometimes we can use a rotation only with some
extra masking, so that we take advantage of the fact that generating a bunch of
extra higher-order 1 bits is easy using li/lis.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225147 91177308-0d34-0410-b5e6-96231b3b80d8
Materializing full 64-bit constants on PPC64 can be expensive, requiring up to
5 instructions depending on the locations of the non-zero bits. Sometimes
materializing a rotated constant, and then applying the inverse rotation, requires
fewer instructions than the direct method. If so, do that instead.
In r225132, I added support for forming constants using bit inversion. In
effect, this reverts that commit and replaces it with rotation support. The bit
inversion is useful for turning constants that are mostly ones into ones that
are mostly zeros (thus enabling a more-efficient shift-based materialization),
but the same effect can be obtained by using negative constants and a rotate,
and that is at least as efficient, if not more.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225135 91177308-0d34-0410-b5e6-96231b3b80d8
Materializing full 64-bit constants on PPC64 can be expensive, requiring up to
5 instructions depending on the locations of the non-zero bits. Sometimes
materializing the bit-reversed constant, and then flipping the bits, requires
fewer instructions than the direct method. If so, do that instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225132 91177308-0d34-0410-b5e6-96231b3b80d8
The existing code provided for specifying a global loop alignment preference.
However, the preferred loop alignment might depend on the loop itself. For
recent POWER cores, loops between 5 and 8 instructions should have 32-byte
alignment (while the others are better with 16-byte alignment) so that the
entire loop will fit in one i-cache line.
To support this, getPrefLoopAlignment has been made virtual, and can be
provided with an optional MachineLoop* so the target can inspect the loop
before answering the query. The default behavior, as before, is to return the
value set with setPrefLoopAlignment. MachineBlockPlacement now queries the
target for each loop instead of only once per function. There should be no
functional change for other targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225117 91177308-0d34-0410-b5e6-96231b3b80d8
Most modern PowerPC cores prefer that functions and loops start on
16-byte-aligned boundaries (*), so instruct block placement, etc. to make this
happen. The branch selector has also been adjusted so account for the extra
nops that might now be inserted before loop headers.
(*) Some cores actually prefer other alignments for small loops, but that will
be addressed in a follow-up commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225115 91177308-0d34-0410-b5e6-96231b3b80d8
Newer POWER cores, and the A2, support the cmpb instruction. This instruction
compares its operands, treating each of the 8 bytes in the GPRs separately,
returning a 'mask' result of 0 (for false) or -1 (for true) in each byte.
Code generation support is added, in the form of a PPCISelDAGToDAG
DAG-preprocessing routine, that recognizes patterns close to what the
instruction computes (either exactly, or related by a constant masking
operation), and generates the cmpb instruction (along with any necessary
constant masking operation). This can be expanded if use cases arise.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225106 91177308-0d34-0410-b5e6-96231b3b80d8
This is the second installment of improvements to instruction selection for "bit
permutation" instruction sequences. r224318 added logic for instruction
selection for 32-bit bit permutation sequences, and this adds lowering for
64-bit sequences. The 64-bit sequences are more complicated than the 32-bit
ones because:
a) the 64-bit versions of the 32-bit rotate-and-mask instructions
work by replicating the lower 32-bits of the value-to-be-rotated into the
upper 32 bits -- and integrating this into the cost modeling for the various
bit group operations is non-trivial
b) unlike the 32-bit instructions in 32-bit mode, the rotate-and-mask instructions
cannot, in one instruction, specify the
mask starting index, the mask ending index, and the rotation factor. Also,
forming arbitrary 64-bit constants is more complicated than in 32-bit mode
because the number of instructions necessary is value dependent.
Plus, support for 'late masking' was added: it is sometimes more efficient to
treat the overall value as if it had no mandatory zero bits when planning the
bit-group insertions, and then mask them in at the very end. Unfortunately, as
the structure of the bit groups is different in the two cases, the more
feasible implementation technique was to generate both instruction sequences,
and then pick the shorter one.
And finally, we now generate reasonable code for i64 bswap:
rldicl 5, 3, 16, 0
rldicl 4, 3, 8, 0
rldicl 6, 3, 24, 0
rldimi 4, 5, 8, 48
rldicl 5, 3, 32, 0
rldimi 4, 6, 16, 40
rldicl 6, 3, 48, 0
rldimi 4, 5, 24, 32
rldicl 5, 3, 56, 0
rldimi 4, 6, 40, 16
rldimi 4, 5, 48, 8
rldimi 4, 3, 56, 0
vs. what we used to produce:
li 4, 255
rldicl 5, 3, 24, 40
rldicl 6, 3, 40, 24
rldicl 7, 3, 56, 8
sldi 8, 3, 8
sldi 10, 3, 24
sldi 12, 3, 40
rldicl 0, 3, 8, 56
sldi 9, 4, 32
sldi 11, 4, 40
sldi 4, 4, 48
andi. 5, 5, 65280
andis. 6, 6, 255
andis. 7, 7, 65280
sldi 3, 3, 56
and 8, 8, 9
and 4, 12, 4
and 9, 10, 11
or 6, 7, 6
or 5, 5, 0
or 3, 3, 4
or 7, 9, 8
or 4, 6, 5
or 3, 3, 7
or 3, 3, 4
which is 12 instructions, instead of 25, and seems optimal (at least in terms
of code size).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225056 91177308-0d34-0410-b5e6-96231b3b80d8
Determining the address of a TLS variable results in a function call in
certain TLS models. This means that a simple ICmpInst might actually
result in invalidating the CTR register.
In such cases, do not attempt to rely on the CTR register for loop
optimization purposes.
This fixes PR22034.
Differential Revision: http://reviews.llvm.org/D6786
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224890 91177308-0d34-0410-b5e6-96231b3b80d8
When materializing constant i1 values, they must be zero extended. We represent
i1 values as [0, 1], not [0, -1], in i32 registers. As it turns out, this code
path was dead for i1 values prior to r216006 (which is why this did not manifest in
miscompiles until recently).
Fixes -O0 self-hosting on PPC64/Linux.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224842 91177308-0d34-0410-b5e6-96231b3b80d8
On non-Darwin PPC64, the TOC reload needs to come directly after the bctrl
instruction (for indirect calls) because the 'bctrl/ld 2, 40(1)' instruction
sequence is interpreted by the unwinding code in libgcc. To make sure these
occur as a pair, as with other pairings interpreted by the linker, fuse the two
instructions into one instruction (for code generation only).
In the future, we might wish to do this by emitting CFI directives instead,
but this solution is simpler, and mirrors what GCC does. Additional discussion
on this point is contained in the PR.
Fixes PR22015.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224788 91177308-0d34-0410-b5e6-96231b3b80d8
It is tempting to mark the fixed stack slot used to store the return address as
immutable when lowering @llvm.returnaddress(i32 0). Unfortunately, within the
function, it is not completely immutable: it is written during the function
prologue. When using post-RA instruction scheduling, the prologue instructions
are available for scheduling, and we're not free to interchange the order of a
particular store in the prologue with loads from that stack location.
Fixes PR21976.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224761 91177308-0d34-0410-b5e6-96231b3b80d8
In r224033, in moving the signed power-of-2 division expansion into
BuildSDIVPow2, I accidentally made it possible to attempt the lowering for a
64-bit division on PPC32. This later asserts.
Fixes PR21928.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224758 91177308-0d34-0410-b5e6-96231b3b80d8
The PowerPC backend, somewhat embarrassingly, did not generate an
optimal-length sequence of instructions for a 32-bit bswap. While adding a
pattern for the bswap intrinsic to fix this would not have been terribly
difficult, doing so would not have addressed the real problem: we had been
generating poor code for many bit-permuting operations (by which I mean things
like byte-swap that permute the bits of one or more inputs around in various
ways). Here are some initial steps toward solving this deficiency.
Bit-permuting operations are represented, at the SDAG level, using ISD::ROTL,
SHL, SRL, AND and OR (mostly with constant second operands). Looking back
through these operations, we can build up a description of the bits in the
resulting value in terms of bits of one or more input values (and constant
zeros). For each bit, we compute the rotation amount from the original value,
and then group consecutive (value, rotation factor) bits into groups. Groups
sharing these attributes are then collected and sorted, and we can then
instruction select the entire permutation using a combination of masked
rotations (rlwinm), imm ands (andi/andis), and masked rotation inserts
(rlwimi).
The result is that instead of lowering an i32 bswap as:
rlwinm 5, 3, 24, 16, 23
rlwinm 4, 3, 24, 0, 7
rlwimi 4, 3, 8, 8, 15
rlwimi 5, 3, 8, 24, 31
rlwimi 4, 5, 0, 16, 31
we now produce:
rlwinm 4, 3, 8, 0, 31
rlwimi 4, 3, 24, 16, 23
rlwimi 4, 3, 24, 0, 7
and for the 'test6' example in the PowerPC/README.txt file:
unsigned test6(unsigned x) {
return ((x & 0x00FF0000) >> 16) | ((x & 0x000000FF) << 16);
}
we used to produce:
lis 4, 255
rlwinm 3, 3, 16, 0, 31
ori 4, 4, 255
and 3, 3, 4
and now we produce:
rlwinm 4, 3, 16, 24, 31
rlwimi 4, 3, 16, 8, 15
and, as a nice bonus, this fixes the FIXME in
test/CodeGen/PowerPC/rlwimi-and.ll.
This commit does not include instruction-selection for i64 operations, those
will come later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224318 91177308-0d34-0410-b5e6-96231b3b80d8
Now that `Metadata` is typeless, reflect that in the assembly. These
are the matching assembly changes for the metadata/value split in
r223802.
- Only use the `metadata` type when referencing metadata from a call
intrinsic -- i.e., only when it's used as a `Value`.
- Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode`
when referencing it from call intrinsics.
So, assembly like this:
define @foo(i32 %v) {
call void @llvm.foo(metadata !{i32 %v}, metadata !0)
call void @llvm.foo(metadata !{i32 7}, metadata !0)
call void @llvm.foo(metadata !1, metadata !0)
call void @llvm.foo(metadata !3, metadata !0)
call void @llvm.foo(metadata !{metadata !3}, metadata !0)
ret void, !bar !2
}
!0 = metadata !{metadata !2}
!1 = metadata !{i32* @global}
!2 = metadata !{metadata !3}
!3 = metadata !{}
turns into this:
define @foo(i32 %v) {
call void @llvm.foo(metadata i32 %v, metadata !0)
call void @llvm.foo(metadata i32 7, metadata !0)
call void @llvm.foo(metadata i32* @global, metadata !0)
call void @llvm.foo(metadata !3, metadata !0)
call void @llvm.foo(metadata !{!3}, metadata !0)
ret void, !bar !2
}
!0 = !{!2}
!1 = !{i32* @global}
!2 = !{!3}
!3 = !{}
I wrote an upgrade script that handled almost all of the tests in llvm
and many of the tests in cfe (even handling many `CHECK` lines). I've
attached it (or will attach it in a moment if you're speedy) to PR21532
to help everyone update their out-of-tree testcases.
This is part of PR21532.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224257 91177308-0d34-0410-b5e6-96231b3b80d8
PPCTargetLowering::DAGCombineExtBoolTrunc contains logic to remove unwanted
truncations and extensions when dealing with nodes of the form:
zext(binary-ops(binary-ops(trunc(x), trunc(y)), ...)
There was a FIXME in the implementation (now removed) regarding the fact that
the function would abort the transformations if any of the non-output operands
of a SELECT or SELECT_CC node would need to be promoted (because they were
also output operands, for example). As a result, we continued to generate
unnecessary zero-extends for code such as this:
unsigned foo(unsigned a, unsigned b) {
return (a <= b) ? a : b;
}
which would produce:
cmplw 0, 3, 4
isel 3, 4, 3, 1
rldicl 3, 3, 0, 32
blr
and now we produce:
cmplw 0, 3, 4
isel 3, 4, 3, 1
blr
which is better in the obvious way.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224213 91177308-0d34-0410-b5e6-96231b3b80d8
On PPC64, we end up with lots of i32 -> i64 zero extensions, not only from all
of the usual places, but also from the ABI, which specifies that values passed
are zero extended. Almost all 32-bit PPC instructions in PPC64 mode are defined
to do *something* to the higher-order bits, and for some instructions, that
action clears those bits (thus providing a zero-extended result). This is
especially common after rotate-and-mask instructions. Adding an additional
instruction to zero-extend the results of these instructions is unnecessary.
This PPCISelDAGToDAG peephole optimization examines these zero-extensions, and
looks back through their operands to see if all instructions will implicitly
zero extend their results. If so, we convert these instructions to their 64-bit
variants (which is an internal change only, the actual encoding of these
instructions is the same as the original 32-bit ones) and remove the
unnecessary zero-extension (changing where the INSERT_SUBREG instructions are
to make everything internally consistent).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224169 91177308-0d34-0410-b5e6-96231b3b80d8
If we have an add (or an or that is really an add), where one operand is a
FrameIndex and the other operand is a small constant, we can combine the
lowering of the FrameIndex (which is lowered as an add of the FI and a zero
offset) with the constant operand.
Amusingly, this is an old potential improvement entry from
lib/Target/PowerPC/README.txt which had never been resolved. In short, we used
to lower:
%X = alloca { i32, i32 }
%Y = getelementptr {i32,i32}* %X, i32 0, i32 1
ret i32* %Y
as:
addi 3, 1, -8
ori 3, 3, 4
blr
and now we produce:
addi 3, 1, -4
blr
which is much more sensible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224071 91177308-0d34-0410-b5e6-96231b3b80d8
PPCISelDAGToDAG contained existing code to lower i32 sdiv by a power-of-2 using
srawi/addze, but did not implement the i64 case. DAGCombine now contains a
callback specifically designed for this purpose (BuildSDIVPow2), and part of
the logic has been moved to an implementation of that callback. Doing this
lowering using BuildSDIVPow2 likely does not matter, compared to handling
everything in PPCISelDAGToDAG, for the positive divisor case, but the negative
divisor case, which generates an additional negation, can potentially benefit
from additional folding from DAGCombine. Now, both the i32 and the i64 cases
have been implemented.
Fixes PR20732.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224033 91177308-0d34-0410-b5e6-96231b3b80d8
With the foregoing three patches, VSX instructions can be used for
little endian. This patch removes the restriction that prevented
this, and re-enables the test cases from the first three patches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223792 91177308-0d34-0410-b5e6-96231b3b80d8
When performing instruction selection for ISD::VECTOR_SHUFFLE, there
is special code for handling v2f64 and v2i64 using VSX instructions.
This code must be adjusted for little-endian. Because the two inputs
are treated as a double-wide register, we must swap their order for
little endian. To get the appropriate mask elements to use with the
big-endian biased XXPERMDI instruction, we must reverse their order
and invert the bits.
A new test is added to test the 16 possible values of the shuffle
mask. It is initially disabled for reasons specified in the test. It
is re-enabled by patch 4/4.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223791 91177308-0d34-0410-b5e6-96231b3b80d8
This patch addresses the inherent big-endian bias in the lxvd2x,
lxvw4x, stxvd2x, and stxvw4x instructions. These instructions load
vector elements into registers left-to-right (with the first element
loaded into the high-order bits of the register), regardless of the
endian setting of the processor. However, these are the only
vector memory instructions that permit unaligned storage accesses, so
we want to use them for little-endian.
To make this work, a lxvd2x or lxvw4x is replaced with an lxvd2x
followed by an xxswapd, which swaps the doublewords. This works for
lxvw4x as well as lxvd2x, because for lxvw4x on an LE system the
vector elements are in LE order (right-to-left) within each
doubleword. (Thus after lxvw2x of a <4 x float> the elements will
appear as 1, 0, 3, 2. Following the swap, they will appear as 3, 2,
0, 1, as desired.) For stores, an stxvd2x or stxvw4x is replaced
with an stxvd2x preceded by an xxswapd.
Introduction of extra swap instructions provides correctness, but
obviously is not ideal from a performance perspective. Future patches
will address this with optimizations to remove most of the introduced
swaps, which have proven effective in other implementations.
The introduction of the swaps is performed during lowering of LOAD,
STORE, INTRINSIC_W_CHAIN, and INTRINSIC_VOID operations. The latter
are used to translate intrinsics that specify the VSX loads and stores
directly into equivalent sequences for little endian. Thus code that
uses vec_vsx_ld and vec_vsx_st does not have to be modified to be
ported from BE to LE.
We introduce new PPCISD opcodes for LXVD2X, STXVD2X, and XXSWAPD for
use during this lowering step. In PPCInstrVSX.td, we add new SDType
and SDNode definitions for these (PPClxvd2x, PPCstxvd2x, PPCxxswapd).
These are recognized during instruction selection and mapped to the
correct instructions.
Several tests that were written to use -mcpu=pwr7 or pwr8 are modified
to disable VSX on LE variants because code generation changes with
this and subsequent patches in this set. I chose to include all of
these in the first patch than try to rigorously sort out which tests
were broken by one or another of the patches. Sorry about that.
The new test vsx-ldst-builtin-le.ll, and the changes to vsx-ldst.ll,
are disabled until LE support is enabled because of breakages that
occur as noted in those tests. They are re-enabled in patch 4/4.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223783 91177308-0d34-0410-b5e6-96231b3b80d8
The aggressive anti-dep breaker, used by the PowerPC backend during post-RA
scheduling (but is available to all targets), did not handle early-clobber MI
operands (at all). When constructing the list of available registers for the
replacement of some def operand, check the using instructions, and remove
registers assigned to early-clobbered defs from the set.
Fixes PR21452.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223727 91177308-0d34-0410-b5e6-96231b3b80d8
GCC accepts 'cc' as an alias for 'cr0', and we need to do the same when
processing inline asm constraints. This had previously been implemented using a
non-allocatable register, named 'cc', that was listed as an alias of 'cr0', but
the infrastructure does not seem to support this properly (neither the register
allocator nor the scheduler properly accounts for the alias). Instead, we can
just process this as a naming alias inside of the inline asm
constraint-processing code, so we'll do that instead.
There are two regression tests, one where the post-RA scheduler did the wrong
thing with the non-allocatable alias, and one where the register allocator did
the wrong thing. Fixes PR21742.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223708 91177308-0d34-0410-b5e6-96231b3b80d8
Reverting this because, while it fixes the problem in the reduced test case, it
does not fix the problem in the full test case from the bug report.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223442 91177308-0d34-0410-b5e6-96231b3b80d8
The scheduling dependency graph is built bottom-up within each scheduling
region, and ScheduleDAGInstrs::addPhysRegDeps is called to add output/anti
dependencies, based on physical registers, to the SUs for instructions
based on those that come before them.
In the test case, we start before post-RA scheduling with a block that looks
like this:
...
INLINEASM <...
andc $0,$0,$2
stdcx. $0,0,$3
bne- 1b
> [sideeffect] [mayload] [maystore] [attdialect], $0:[regdef-ec:G8RC], %X6<earlyclobber,def,dead>, $1:[mem], %X3<kill>, $2:[reguse:G8RC], %X5<kill>, $3:[reguse:G8RC], %X3, $4:[mem], %X3, $5:[clobber], %CC<earlyclobber,imp-def,dead>, <<badref>>
...
%X4<def,dead> = ANDIo8 %X4<kill>, 1, %CR0<imp-def,dead>, %CR0GT<imp-def>
...
%R29<def> = ISEL %R3<undef>, %R4<kill>, %CR0GT<kill>
where it is relevant that %CC is an alias to %CR0, and that %CR0GT is a
subregister of %CR0. However, for post-RA scheduling, no dependency was added
to prevent the INLINEASM from being scheduled in between the ANDIo8 and the
ISEL (which communicate via the %CR0GT register).
In ScheduleDAGInstrs::addPhysRegDeps, when called for the %CC operand, we'd
iterate over all of its aliases (which include %CC itself and also %CR0), and
look for previously-encountered defs of those registers. We'd find the ANDIo8,
but decide not to add a dependency between the INLINEASM and the ANDIo8 because
both the INLINEASM's def of %CC is dead, and also the ANDIo8 def of %CR0 is
dead. This ignores, however, that ANDIo8 has a non-dead def of %CR0GT, a
subregister of %CR0, and thus a dependency still must exist.
To fix this problem, when calling registerDefIsDead on the SU with the def, we
also check all subregisters for possible non-dead defs, and add the dependency
if any are found.
Fixes PR21742.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223440 91177308-0d34-0410-b5e6-96231b3b80d8
We had mistakenly believed that GCC's 'cc' referred to the entire
condition-code register (cr0 through cr7) -- and implemented this in r205630 to
fix PR19326, but 'cc' is actually an alias only to 'cr0'. This is causing LLVM
to clobber too much with legacy code with inline asm using the 'cc' clobber.
Fixes PR21451.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223328 91177308-0d34-0410-b5e6-96231b3b80d8
On PowerPC, inline asm memory operands might be expanded as 0($r), where $r is
a register containing the address. As a result, this register cannot be r0, and
we need to enforce this register subclass constraint to prevent miscompiling
the code (we'd get this constraint for free with the usual instruction
definitions, but that scheme has no knowledge of how we end up printing inline
asm memory operands, and so here we need to do it 'by hand'). We can accomplish
this within the current address-mode selection framework by introducing an
explicit COPY_TO_REGCLASS node.
Fixes PR21443.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223318 91177308-0d34-0410-b5e6-96231b3b80d8
Almost all immediates in PowerPC assembly (both 32-bit and 64-bit) are signed
numbers, and it is important that we print them as such. To make sure that
happens, we change PPCTargetLowering::LowerAsmOperandForConstraint so that it
does all intermediate checks on a signed-extended int64_t value, and then
creates the resulting target constant using MVT::i64. This will ensure that all
negative values are printed as negative values (mirroring what is done in other
backends to achieve the same sign-extension effect).
This came up in the context of inline assembly like this:
"add%I2 %0,%0,%2", ..., "Ir"(-1ll)
where we used to print:
addi 3,3,4294967295
and gcc would print:
addi 3,3,-1
and gas accepts both forms, but our builtin assembler (correctly) does not. Now
we print -1 like gcc does.
While here, I replaced a bunch of custom integer checks with isInt<16> and
friends from MathExtras.h.
Thanks to Paul Hargrove for the bug report.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223220 91177308-0d34-0410-b5e6-96231b3b80d8
We need to use the custom expansion of readcyclecounter on all 32-bit targets
(even those with 64-bit registers). This should fix the ppc64 buildbot.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223182 91177308-0d34-0410-b5e6-96231b3b80d8
We've long supported readcyclecounter on PPC64, but it is easier there (the
read of the 64-bit time-base register can be accomplished via a single
instruction). This now provides an implementation for PPC32 as well. On PPC32,
the time-base register is still 64 bits, but can only be read 32 bits at a time
via two separate SPRs. The ISA manual explains how to do this properly (it
involves re-reading the upper bits and looping if the counter has wrapped while
being read).
This requires PPC to implement a custom integer splitting legalization for the
READCYCLECOUNTER node, turning it into a target-specific SDAG node, which then
gets turned into a pseudo-instruction, which is then expanded to the necessary
sequence (which has three SPR reads, the comparison and the branch).
Thanks to Paul Hargrove for pointing out to me that this was still unimplemented.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223161 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
PowerPC DWARF unwind info defined CFA as SP + offset even in a function
where the stack had been dynamically realigned. This clearly doesn't
work because the offset from SP to CFA is not a constant. Fix it by
defining CFA as BP instead.
This was causing the AddressSanitizer null_deref test to fail 50% of
the time, depending on whether SP happened to be 32-byte aligned on
entry to a particular function or not.
Reviewers: willschm, uweigand, hfinkel
Reviewed By: hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6410
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222996 91177308-0d34-0410-b5e6-96231b3b80d8
This does not matter on newer cores (where we can use reciprocal estimates in
fast-math mode anyway), but for older cores this allows us to generate better
fast-math code where we have multiple FDIVs with a common divisor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222710 91177308-0d34-0410-b5e6-96231b3b80d8
This mirrors r222331, which enabled SeparateConstOffsetFromGEP on AArch64, in
the PowerPC backend. Yields, on a POWER7 machine, a 30% speedup on
SingleSource/Benchmarks/Shootout/nestedloop (this might just be from LICM,
there is a store moved out of the inner loop) and a potential speedup on
MultiSource/Benchmarks/mediabench/mpeg2/mpeg2dec/mpeg2decode. Regardless, it
makes some code look cleaner, and synchronizing the backends in this regard
seems like a generally good thing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222504 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds builtin support for xvdivdp and xvdivsp, along with a
test case. Straightforward stuff.
There's a companion patch for Clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221983 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Large-model was added first. With the addition of support for multiple PIC
models in LLVM, now add small-model PIC for 32-bit PowerPC, SysV4 ABI. This
generates more optimal code, for shared libraries with less than about 16380
data objects.
Test Plan: Test cases added or updated
Reviewers: joerg, hfinkel
Reviewed By: hfinkel
Subscribers: jholewinski, mcrosier, emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D5399
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221791 91177308-0d34-0410-b5e6-96231b3b80d8
This patch enables the vec_vsx_ld and vec_vsx_st intrinsics for
PowerPC, which provide programmer access to the lxvd2x, lxvw4x,
stxvd2x, and stxvw4x instructions.
New LLVM intrinsics are provided to represent these four instructions
in IntrinsicsPowerPC.td. These are patterned after the similar
intrinsics for lvx and stvx (Altivec). In PPCInstrVSX.td, these
intrinsics are tied to the code gen patterns, with additional patterns
to allow plain vanilla loads and stores to still generate these
instructions.
At -O1 and higher the intrinsics are immediately converted to loads
and stores in InstCombineCalls.cpp. This will open up more
optimization opportunities while still allowing the correct
instructions to be generated. (Similar code exists for aligned
Altivec loads and stores.)
The new intrinsics are added to the code that checks for consecutive
loads and stores in PPCISelLowering.cpp, as well as to
PPCTargetLowering::getTgtMemIntrinsic().
There's a new test to verify the correct instructions are generated.
The loads and stores tend to be reordered, so the test just counts
their number. It runs at -O2, as it's not very effective to test this
at -O0, when many unnecessary loads and stores are generated.
I ended up having to modify vsx-fma-m.ll. It turns out this test case
is slightly unreliable, but I don't know a good way to prevent
problems with it. The xvmaddmdp instructions read and write the same
register, which is one of the multiplicands. Commutativity allows
either to be chosen. If the FMAs are reordered differently than
expected by the test, the register assignment can be different as a
result. Hopefully this doesn't change often.
There is a companion patch for Clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221767 91177308-0d34-0410-b5e6-96231b3b80d8
My original support for the general dynamic and local dynamic TLS
models contained some fairly obtuse hacks to generate calls to
__tls_get_addr when lowering a TargetGlobalAddress. Rather than
generating real calls, special GET_TLS_ADDR nodes were used to wrap
the calls and only reveal them at assembly time. I attempted to
provide correct parameter and return values by chaining CopyToReg and
CopyFromReg nodes onto the GET_TLS_ADDR nodes, but this was also not
fully correct. Problems were seen with two back-to-back stores to TLS
variables, where the call sequences ended up overlapping with unhappy
results. Additionally, since these weren't real calls, the proper
register side effects of a call were not recorded, so clobbered values
were kept live across the calls.
The proper thing to do is to lower these into calls in the first
place. This is relatively straightforward; see the changes to
PPCTargetLowering::LowerGlobalTLSAddress() in PPCISelLowering.cpp.
The changes here are standard call lowering, except that we need to
track the fact that these calls will require a relocation. This is
done by adding a machine operand flag of MO_TLSLD or MO_TLSGD to the
TargetGlobalAddress operand that appears earlier in the sequence.
The calls to LowerCallTo() eventually find their way to
LowerCall_64SVR4() or LowerCall_32SVR4(), which call FinishCall(),
which calls PrepareCall(). In PrepareCall(), we detect the calls to
__tls_get_addr and immediately snag the TargetGlobalTLSAddress with
the annotated relocation information. This becomes an extra operand
on the call following the callee, which is expected for nodes of type
tlscall. We change the call opcode to CALL_TLS for this case. Back
in FinishCall(), we change it again to CALL_NOP_TLS for 64-bit only,
since we require a TOC-restore nop following the call for the 64-bit
ABIs.
During selection, patterns in PPCInstrInfo.td and PPCInstr64Bit.td
convert the CALL_TLS nodes into BL_TLS nodes, and convert the
CALL_NOP_TLS nodes into BL8_NOP_TLS nodes. This replaces the code
removed from PPCAsmPrinter.cpp, as the BL_TLS or BL8_NOP_TLS
nodes can now be emitted normally using their patterns and the
associated printTLSCall print method.
Finally, as a result of these changes, all references to get-tls-addr
in its various guises are no longer used, so they have been removed.
There are existing TLS tests to verify the changes haven't messed
anything up). I've added one new test that verifies that the problem
with the original code has been fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221703 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we have initial support for VSX, we can begin adding
intrinsics for programmer access to VSX instructions. This patch adds
basic support for VSX intrinsics in general, and tests it by
implementing intrinsics for minimum and maximum for the vector double
data type.
The LLVM portion of this is quite straightforward. There is a
companion patch for Clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220988 91177308-0d34-0410-b5e6-96231b3b80d8
Since block address values can be larger than 2GB in 64-bit code, they
cannot be loaded simply using an @l / @ha pair, but instead must be
loaded from the TOC, just like GlobalAddress, ConstantPool, and
JumpTable values are.
The commit also fixes a bug in PPCLinuxAsmPrinter::doFinalization where
temporary labels could not be used as TOC values, since code would
attempt (and fail) to use GetOrCreateSymbol to create a symbol of the
same name as the temporary label.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220959 91177308-0d34-0410-b5e6-96231b3b80d8
A previous patch enabled SELECT_VSRC and SELECT_CC_VSRC for VSX to
handle <2 x double> cases. This patch adds SELECT_VSFRC and
SELECT_CC_VSFRC to allow use of all 64 vector-scalar registers for the
f64 type when VSX is enabled. The changes are analogous to those in
the previous patch. I've added a new variant to vsx.ll to test the
code generation.
(I also cleaned up a little formatting in PPCInstrVSX.td from the
previous patch.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220395 91177308-0d34-0410-b5e6-96231b3b80d8
With VSX enabled, test/CodeGen/PowerPC/recipest.ll exposes a bug in
the FMA mutation pass. If we have a situation where a killed product
register is the same register as the FMA target, such as:
%vreg5<def,tied1> = XSNMSUBADP %vreg5<tied0>, %vreg11, %vreg5,
%RM<imp-use>; VSFRC:%vreg5 F8RC:%vreg11
then the substitution makes no sense. We end up getting a crash when
we try to extend the interval associated with the killed product
register, as there is already a live range for %vreg5 there. This
patch just disables the mutation under those circumstances.
Since recipest.ll generates different code with VMX enabled, I've
modified that test to use -mattr=-vsx. I've borrowed the code from
that test that exposed the bug and placed it in fma-mutate.ll, where
it tests several mutation opportunities including the "bad" one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220290 91177308-0d34-0410-b5e6-96231b3b80d8
We recently discovered an issue that reinforces what a good idea it is
to always specify -mcpu in our code generation tests, particularly for
-mattr=+vsx. This patch ensures that all tests that specify
-mattr=+vsx also specify -mcpu=pwr7 or -mcpu=pwr8, as appropriate.
Some of the uses of -mattr=+vsx added recently don't make much sense
(when specified for -mtriple=powerpc-apple-darwin8 or -march=ppc32,
for example). For cases like this I've just removed the extra VSX
test commands; there's enough coverage without them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220173 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Bill Seurer; some comment formatting changes by me.
There are a few PowerPC test cases for FastISel support that currently
fail with VSX support enabled. The temporary workaround under
discussion in http://reviews.llvm.org/D5362 helps, but the tests still
fail because they specify -fast-isel-abort, and the VSX workaround
punts back to SelectionDAG. We have plans to fix FastISel permanently
for VSX, but until that's in place these tests are preventing us from
enabling VSX by default. Therefore we are adding -mattr=-vsx to these
tests until the full support is ready.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220172 91177308-0d34-0410-b5e6-96231b3b80d8
The VSX testing variant in test/CodeGen/PowerPC/fma.ll had to be
disabled because of unexpected behavior on many of the builders. I
tracked this down to a situation that occurs when the VSX attribute is
enabled for a target that disables the MI early scheduling pass. This
patch adds -mcpu=pwr7 to make this predictable. The other issue will
be addressed separately.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220171 91177308-0d34-0410-b5e6-96231b3b80d8
With VSX enabled, LLVM crashes when compiling
test/CodeGen/PowerPC/fma.ll. I traced this to the liveness test
that's revised in this patch. The interval test is designed to only
work for virtual registers, but in this case the AddendSrcReg is
physical. Since there is already a walk of the MIs between the
AddendMI and the FMA, I added a check for def/kill of the AddendSrcReg
in that loop. At Hal Finkel's request, I converted the liveness test
to an assert restricted to virtual registers.
I've changed the fma.ll test to have VSX and non-VSX variants so we
can test both kinds of multiply-adds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220090 91177308-0d34-0410-b5e6-96231b3b80d8
Currently the VSX support enables use of lxvd2x and stxvd2x for 2x64
types, but does not yet use lxvw4x and stxvw4x for 4x32 types. This
patch adds that support.
As with lxvd2x/stxvd2x, this involves straightforward overriding of
the patterns normally recognized for lvx/stvx, with preference given
to the VSX patterns when VSX is enabled.
In addition, the logic for permitting misaligned memory accesses is
modified so that v4r32 and v4i32 are treated the same as v2f64 and
v2i64 when VSX is enabled. Finally, the DAG generation for unaligned
loads is changed to just use a normal LOAD (which will become lxvw4x)
on P8 and later hardware, where unaligned loads are preferred over
lvsl/lvx/lvx/vperm.
A number of tests now generate the VSX loads/stores instead of
lvx/stvx, so this patch adds VSX variants to those tests. I've also
added <4 x float> tests to the vsx.ll test case, and created a
vsx-p8.ll test case to be used for testing code generation for the
P8Vector feature. For now, that simply tests the unaligned load/store
behavior.
This has been tested along with a temporary patch to enable the VSX
and P8Vector features, with no new regressions encountered with or
without the temporary patch applied.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220047 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Bill Seurer; committed on his behalf.
These test cases generate slightly different code sequences when VSX
is activated and thus fail. The update turns off VSX explicitly for
the existing checks and then adds a second set of checks for most of
them that test the VSX instruction output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220019 91177308-0d34-0410-b5e6-96231b3b80d8
This patch changes the fast-math implementation for calculating sqrt(x) from:
y = 1 / (1 / sqrt(x))
to:
y = x * (1 / sqrt(x))
This has 2 benefits: less code / faster code and one less estimate instruction
that may lose precision.
The only target that will be affected (until http://reviews.llvm.org/D5658 is approved)
is PPC. The difference in codegen for PPC is 2 less flops for a single-precision sqrtf
or vector sqrtf and 4 less flops for a double-precision sqrt.
We also eliminate a constant load and extra register usage.
Differential Revision: http://reviews.llvm.org/D5682
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219445 91177308-0d34-0410-b5e6-96231b3b80d8
The current implementation of GPR->FPR register moves uses a stack slot. This mechanism writes a double word and reads a word. In big-endian the load address must be displaced by 4-bytes in order to get the right value. In little endian this is no longer required. This patch fixes the issue and adds LE regression tests to fast-isel-conversion which currently expose this problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219441 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r218918, effectively reapplying r218914 after fixing
an Ocaml bindings test and an Asan crash. The root cause of the latter
was a tightened-up check in `DILexicalBlock::Verify()`, so I'll file a
PR to investigate who requires the loose check (and why).
Original commit message follows.
--
This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.
Part of PR17891.
Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219010 91177308-0d34-0410-b5e6-96231b3b80d8
The test Atomics-32.ll was both redundant (all operations are also checked by
atomics.ll at least) and not actually checking correctness (it was not using
FileCheck, just verifying that the compiler does not crash).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218997 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
hwsync is only required for seq_cst fences, acquire and release one can use
the cheaper lwsync.
Test Plan: Added some cases to atomics.ll + make check-all
Reviewers: jfb, wschmidt
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5317
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218995 91177308-0d34-0410-b5e6-96231b3b80d8
Older Book-E cores, such as the PPC 440, support only msync (which has the same
encoding as sync 0), but not any of the other sync forms. Newer Book-E cores,
however, do support sync, and for performance reasons we should allow the use
of the more-general form.
This refactors msync use into its own feature group so that it applies by
default only to older Book-E cores (of the relevant cores, we only have
definitions for the PPC440/450 currently).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218923 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Atomic loads and store of up to the native size (32 bits, or 64 for PPC64)
can be lowered to a simple load or store instruction (as the synchronization
is already handled by AtomicExpand, and the atomicity is guaranteed thanks to
the alignment requirements of atomic accesses). This is exactly what this patch
does. Previously, these were implemented by complex
load-linked/store-conditional loops.. an obvious performance problem.
For example, this patch turns
```
define void @store_i8_unordered(i8* %mem) {
store atomic i8 42, i8* %mem unordered, align 1
ret void
}
```
from
```
_store_i8_unordered: ; @store_i8_unordered
; BB#0:
rlwinm r2, r3, 3, 27, 28
li r4, 42
xori r5, r2, 24
rlwinm r2, r3, 0, 0, 29
li r3, 255
slw r4, r4, r5
slw r3, r3, r5
and r4, r4, r3
LBB4_1: ; =>This Inner Loop Header: Depth=1
lwarx r5, 0, r2
andc r5, r5, r3
or r5, r4, r5
stwcx. r5, 0, r2
bne cr0, LBB4_1
; BB#2:
blr
```
into
```
_store_i8_unordered: ; @store_i8_unordered
; BB#0:
li r2, 42
stb r2, 0(r3)
blr
```
which looks like a pretty clear win to me.
Test Plan:
fixed the tests + new test for indexed accesses + make check-all
Reviewers: jfb, wschmidt, hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5587
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218922 91177308-0d34-0410-b5e6-96231b3b80d8
This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.
Part of PR17891.
Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218914 91177308-0d34-0410-b5e6-96231b3b80d8
argument of the llvm.dbg.declare/llvm.dbg.value intrinsics.
Previously, DIVariable was a variable-length field that has an optional
reference to a Metadata array consisting of a variable number of
complex address expressions. In the case of OpPiece expressions this is
wasting a lot of storage in IR, because when an aggregate type is, e.g.,
SROA'd into all of its n individual members, the IR will contain n copies
of the DIVariable, all alike, only differing in the complex address
reference at the end.
By making the complex address into an extra argument of the
dbg.value/dbg.declare intrinsics, all of the pieces can reference the
same variable and the complex address expressions can be uniqued across
the CU, too.
Down the road, this will allow us to move other flags, such as
"indirection" out of the DIVariable, too.
The new intrinsics look like this:
declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr)
declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr)
This patch adds a new LLVM-local tag to DIExpressions, so we can detect
and pretty-print DIExpression metadata nodes.
What this patch doesn't do:
This patch does not touch the "Indirect" field in DIVariable; but moving
that into the expression would be a natural next step.
http://reviews.llvm.org/D4919
rdar://problem/17994491
Thanks to dblaikie and dexonsmith for reviewing this patch!
Note: I accidentally committed a bogus older version of this patch previously.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218787 91177308-0d34-0410-b5e6-96231b3b80d8
argument of the llvm.dbg.declare/llvm.dbg.value intrinsics.
Previously, DIVariable was a variable-length field that has an optional
reference to a Metadata array consisting of a variable number of
complex address expressions. In the case of OpPiece expressions this is
wasting a lot of storage in IR, because when an aggregate type is, e.g.,
SROA'd into all of its n individual members, the IR will contain n copies
of the DIVariable, all alike, only differing in the complex address
reference at the end.
By making the complex address into an extra argument of the
dbg.value/dbg.declare intrinsics, all of the pieces can reference the
same variable and the complex address expressions can be uniqued across
the CU, too.
Down the road, this will allow us to move other flags, such as
"indirection" out of the DIVariable, too.
The new intrinsics look like this:
declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr)
declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr)
This patch adds a new LLVM-local tag to DIExpressions, so we can detect
and pretty-print DIExpression metadata nodes.
What this patch doesn't do:
This patch does not touch the "Indirect" field in DIVariable; but moving
that into the expression would be a natural next step.
http://reviews.llvm.org/D4919
rdar://problem/17994491
Thanks to dblaikie and dexonsmith for reviewing this patch!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218778 91177308-0d34-0410-b5e6-96231b3b80d8
This is purely refactoring. No functional changes intended. PowerPC is the only target
that is currently using this interface.
The ultimate goal is to allow targets other than PowerPC (certainly X86 and Aarch64) to turn this:
z = y / sqrt(x)
into:
z = y * rsqrte(x)
And:
z = y / x
into:
z = y * rcpe(x)
using whatever HW magic they can use. See http://llvm.org/bugs/show_bug.cgi?id=20900 .
There is one hook in TargetLowering to get the target-specific opcode for an estimate instruction
along with the number of refinement steps needed to make the estimate usable.
Differential Revision: http://reviews.llvm.org/D5484
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218553 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch makes use of AtomicExpandPass in Power for inserting fences around
atomic as part of an effort to remove fence insertion from SelectionDAGBuilder.
As a big bonus, it lets us use sync 1 (lightweight sync, often used by the mnemonic
lwsync) instead of sync 0 (heavyweight sync) in many cases.
I also added a test, as there was no test for the barriers emitted by the Power
backend for atomic loads and stores.
Test Plan: new test + make check-all
Reviewers: jfb
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5180
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218331 91177308-0d34-0410-b5e6-96231b3b80d8
We manage to generate all of the matching instructions (and a lot more) via
the reciprocal optimization function - even if we completely remove the square
root optimization. With CHECK_NEXT, we assure that we're executing the
expected square root optimization paths and not generating extra insts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218284 91177308-0d34-0410-b5e6-96231b3b80d8
The heuristic used by DAGCombine to form FMAs checks that the FMUL has only one
use, but this is overly-conservative on some systems. Specifically, if the FMA
and the FADD have the same latency (and the FMA does not compete for resources
with the FMUL any more than the FADD does), there is no need for the
restriction, and furthermore, forming the FMA leaving the FMUL can still allow
for higher overall throughput and decreased critical-path length.
Here we add a new TLI callback, enableAggressiveFMAFusion, false by default, to
elide the hasOneUse check. This is enabled for PowerPC by default, as most
PowerPC systems will benefit.
Patch by Olivier Sallenave, thanks!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218120 91177308-0d34-0410-b5e6-96231b3b80d8
For PPC targets, FastISel does not take the sign extension information into account when selecting return instructions whose operands are constants. A consequence of this is that the return of boolean values is not correct. This patch fixes the problem by evaluating the sign extension information also for constants, forwarding this information to PPCMaterializeInt which takes this information to drive the sign extension during the materialization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217993 91177308-0d34-0410-b5e6-96231b3b80d8
