Addresses a review comment from Ulrich Weigand. No functional change intended.
I'm not sure whether the old TODO that this patch touches still holds,
but that's something we'd get to when adding a targetted scheduling
description.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182474 91177308-0d34-0410-b5e6-96231b3b80d8
The original version of the pass could underestimate the length of a backward
branch in cases like:
alignment to N bytes or more
...
relaxable branch A
...
foo: (aligned to M<N bytes)
...
bar: (aligned to N bytes)
...
relaxable branch B to foo
We don't add any misalignment gap for "bar" because N bytes of alignment
had already been reached earlier in the function. In this case, assuming
that A is relaxed can push "foo" closer to "bar", and make B appear to be
in range. Similar problems can occur for forward branches.
I don't think it's possible to create blocks with mixed alignments as
things stand, not least because we haven't yet defined getPrefLoopAlignment()
for SystemZ (that would need benchmarking). So I don't think we can test
this yet.
Thanks to Rafael Espíndola for spotting the bug.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182460 91177308-0d34-0410-b5e6-96231b3b80d8
Allow LLVM to take advantage of shift instructions that set the ZF flag,
making instructions that test the destination superfluous.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182454 91177308-0d34-0410-b5e6-96231b3b80d8
MSC is confused about "memcpy" between <cstring> and llvm::Intrinsic::memcpy, when llvm::Intrinsic were exposed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182452 91177308-0d34-0410-b5e6-96231b3b80d8
Although I had added some support for the BDZ/BDNZ branches into the selector
(in r158204), I had not correctly adjusted the condition at the top of the
loop. As a result, these branches were still essentially unsupported.
This fixes PR16086. Unfortunately, any test case would be very large (because
it would need to force the loop backedge to exceed the range of the 16-bit
immediate).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182385 91177308-0d34-0410-b5e6-96231b3b80d8
pic calls. These need to be there so we don't try and use helper
functions when we call those.
As part of this, make sure that we properly exclude helper functions in pic
mode when indirect calls are involved.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182343 91177308-0d34-0410-b5e6-96231b3b80d8
By default, a teq instruction is inserted after integer divide. No divide-by-zero
checks are performed if option "-mnocheck-zero-division" is used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182306 91177308-0d34-0410-b5e6-96231b3b80d8
Now that the preheader insertion logic in LoopSimplify is externally exposed,
use it, and remove the copy-and-pasted version.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182300 91177308-0d34-0410-b5e6-96231b3b80d8
As the pairing of this instruction form with the bdnz/bdz branches is now
enforced by the verification pass, make it clear from the name that these
are used only for counter-based loops.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182296 91177308-0d34-0410-b5e6-96231b3b80d8
When asserts are enabled, this adds a verification pass for PPC counter-loop
formation. Unfortunately, without sacrificing code quality, there is no better
way of forming counter-based loops except at the (late) IR level. This means
that we need to recognize, at the IR level, anything which might turn into a
function call (or indirect branch). Because this is currently a finite set of
things, and because SelectionDAG lowering is basic-block local, this can be
done. Nevertheless, it is fragile, and failure results in a miscompile. This
verification pass checks that all (reachable) counter-based branches are
dominated by a loop mtctr instruction, and that no instructions in between
clobber the counter register. If these conditions are not satisfied, then an
ICE will be triggered.
In short, this is to help us sleep better at night.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182295 91177308-0d34-0410-b5e6-96231b3b80d8
R600TextureIntrinsicsReplacer.cpp:232: warning: the address of ‘ArgsType’ will always evaluate as ‘true’
This doesn't have any effect on the output as a vararg intrinsic behaves the
same way as a non-vararg one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182293 91177308-0d34-0410-b5e6-96231b3b80d8
This will simplify the instructions and also the pattern definitions.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182288 91177308-0d34-0410-b5e6-96231b3b80d8
This makes it possible to reorder the operands without breaking the
encoding.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182283 91177308-0d34-0410-b5e6-96231b3b80d8
Before this change, the SystemZ backend would use BRCL for all branches
and only consider shortening them to BRC when generating an object file.
E.g. a branch on equal would use the JGE alias of BRCL in assembly output,
but might be shortened to the JE alias of BRC in ELF output. This was
a useful first step, but it had two problems:
(1) The z assembler isn't traditionally supposed to perform branch shortening
or branch relaxation. We followed this rule by not relaxing branches
in assembler input, but that meant that generating assembly code and
then assembling it would not produce the same result as going directly
to object code; the former would give long branches everywhere, whereas
the latter would use short branches where possible.
(2) Other useful branches, like COMPARE AND BRANCH, do not have long forms.
We would need to do something else before supporting them.
(Although COMPARE AND BRANCH does not change the condition codes,
the plan is to model COMPARE AND BRANCH as a CC-clobbering instruction
during codegen, so that we can safely lower it to a separate compare
and long branch where necessary. This is not a valid transformation
for the assembler proper to make.)
This patch therefore moves branch relaxation to a pre-emit pass.
For now, calls are still shortened from BRASL to BRAS by the assembler,
although this too is not really the traditional behaviour.
The first test takes about 1.5s to run, and there are likely to be
more tests in this vein once further branch types are added. The feeling
on IRC was that 1.5s is a bit much for a single test, so I've restricted
it to SystemZ hosts for now.
The patch exposes (and fixes) some typos in the main CodeGen/SystemZ tests.
A later patch will remove the {{g}}s from that directory.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182274 91177308-0d34-0410-b5e6-96231b3b80d8
This converter currently only handles global variables in address space 0. For
these variables, they are promoted to address space 1 (global memory), and all
uses are updated to point to the result of a cvta.global instruction on the new
variable.
The motivation for this is address space 0 global variables are illegal since we
cannot declare variables in the generic address space. Instead, we place the
variables in address space 1 and explicitly convert the pointer to address
space 0. This is primarily intended to help new users who expect to be able to
place global variables in the default address space.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182254 91177308-0d34-0410-b5e6-96231b3b80d8
Introduction:
In case when stack alignment is 8 and GPRs parameter part size is not N*8:
we add padding to GPRs part, so part's last byte must be recovered at
address K*8-1.
We need to do it, since remained (stack) part of parameter starts from
address K*8, and we need to "attach" "GPRs head" without gaps to it:
Stack:
|---- 8 bytes block ----| |---- 8 bytes block ----| |---- 8 bytes...
[ [padding] [GPRs head] ] [ ------ Tail passed via stack ------ ...
FIX:
Note, once we added padding we need to correct *all* Arg offsets that are going
after padded one. That's why we need this fix: Arg offsets were never corrected
before this patch. See new test-cases included in patch.
We also don't need to insert padding for byval parameters that are stored in GPRs
only. We need pad only last byval parameter and only in case it outsides GPRs
and stack alignment = 8.
Though, stack area, allocated for recovered byval params, must satisfy
"Size mod 8 = 0" restriction.
This patch reduces stack usage for some cases:
We can reduce ArgRegsSaveArea since inner N*4 bytes sized byval params my be
"packed" with alignment 4 in some cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182237 91177308-0d34-0410-b5e6-96231b3b80d8
