Summary:
It's not emitted by the code generator so we only need assembler tests.
Also added missing daddi aliases from dsub mnemonics, and removed a couple
duplicate dsub tests.
Depends on D4112
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4113
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210897 91177308-0d34-0410-b5e6-96231b3b80d8
When targetting Thumb1 on a processor which has a VFP unit (which
is not accessible from Thumb1), we were converting the fastcc calling
convention to AAPCS-VFP, which is not possible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210889 91177308-0d34-0410-b5e6-96231b3b80d8
CondCode actions are set with setCondCodeAction.
This should have been a harmless bug since the values seem to only
collide only with nodes that don't need to be handled, and these are
already correctly setup elsewhere.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210888 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the cvttss2si/cvttsd2si intrinsics. Preceding
insertelement instructions are folded into the conversion instruction (if
possible).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210870 91177308-0d34-0410-b5e6-96231b3b80d8
Add branch weights to branch instructions, so that the following passes can
optimize based on it (i.e. basic block ordering).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210863 91177308-0d34-0410-b5e6-96231b3b80d8
so we can use initializer lists for the ARMSubtarget and then
use this to initialize a moved DataLayout on the subtarget from
the TargetMachine.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210861 91177308-0d34-0410-b5e6-96231b3b80d8
Previous algorithm for constructing [Address ranges]->[Compile Units]
mapping was wrong. It somewhat relied on the assumption that address ranges
for different compile units may not overlap. It is not so.
For example, two compile units may contain the definition of the same
linkonce_odr function. These definitions will be merged at link-time,
resulting in equivalent .debug_ranges entries for both these units
Instead of sorting and merging original address ranges (from .debug_ranges
and .debug_aranges), implement a different approach: save endpoints
of all ranges, and then use a sweep-line approach to construct
the desired mapping. If we find that certain address maps to
several compilation units, we just pick any of them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210860 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds MachineMemOperands to load and store instructions. This allows
the peephole optimizer to fold load instructions. Unfortunatelly the peephole
optimizer currently doesn't run at -O0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210858 91177308-0d34-0410-b5e6-96231b3b80d8
the subtarget. Also remove unnecessary argument to the constructor
at the same time, we already have access via the subtarget.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210844 91177308-0d34-0410-b5e6-96231b3b80d8
Enable value forwarding for loads from `calloc()` without an intervening
store.
This change extends GVN to handle the following case:
%1 = tail call noalias i8* @calloc(i64 1, i64 4)
%2 = bitcast i8* %1 to i32*
; This load is trivially constant zero
%3 = load i32* %2, align 4
This is analogous to the handling for `malloc()` in the same places.
`malloc()` returns `undef`; `calloc()` returns a zero value. Note that
it is correct to return zero even for out of bounds GEPs since the
result of such a GEP would be undefined.
Patch by Philip Reames!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210828 91177308-0d34-0410-b5e6-96231b3b80d8
Delete all unused ones, and add new AMDGPU named intrinsics for
the ones that are. Handle the old AMDIL names for comptability (although
remove their GCCBuiltin names) and add tests since there weren't any
for these before.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210827 91177308-0d34-0410-b5e6-96231b3b80d8
the initializeSubtargetDependencies code to obtain an initialized
subtarget and migrate a couple of subtarget using functions to the
.cpp file to avoid circular includes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210822 91177308-0d34-0410-b5e6-96231b3b80d8
Recommit with fixed argument attribute checking code, which is required to bail
out of all the cases we don't handle yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210815 91177308-0d34-0410-b5e6-96231b3b80d8
Windows on ARM uses COFF/PE which is intrinsically position independent. For
the case of 32-bit immediates, use a pair-wise relocation as otherwise we may
exceed the range of operators. This fixes a code generation crash when using
-Oz when targeting Windows on ARM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210814 91177308-0d34-0410-b5e6-96231b3b80d8
Turns out that DW_AT_ranges_base attribute sets the offset for
DW_AT_ranges values specified in the .dwo file, but not for DW_AT_ranges specified
in the skeleton compile unit DIE in the main executable. This is extremely confusing,
and would hopefully be fixed in DWARF-5 when it's finalized. For now this
behavior makes sense, as otherwise Fission would break DWARF consumers who
doesn't know anything about DW_AT_ranges_base.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210809 91177308-0d34-0410-b5e6-96231b3b80d8
lib/Target/X86/X86TargetTransformInfo.cpp: In member function ‘virtual unsigned int {anonymous}::X86TTI::getIntImmCost(unsigned int, unsigned int, const llvm::APInt&, llvm::Type*) const’:
lib/Target/X86/X86TargetTransformInfo.cpp:920:60: warning: enumeral and non-enumeral type in conditional expression [enabled by default]
This seems like an unhelpful warning, but there doesnt seem to be a controlling
flag, so add an explicit cast to silence the warning.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210806 91177308-0d34-0410-b5e6-96231b3b80d8
This is a minimal change to remove the header. I will remove the occurrences
of "using std::error_code" in a followup patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210803 91177308-0d34-0410-b5e6-96231b3b80d8
Since removeRegistrationListener is no longer called during static
destruction, we can get rid of the pimpl in PassRegistry.
This should clean up the code somewhat, increase clarity, and also
allows us to put the Lock as a member of the class, instead of as a
ManagedStatic.
As part of this change, the PassInfo class is moved from
PassSupport.h to its own file, to eliminate the otherwise circular
header dependency between PassRegistry.h and PassSupport.h
Reviewed by: rnk, dblaikie
Differential Revision: http://reviews.llvm.org/D4107
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210793 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r210540, adds a testcase for the regression it
caused, and marks the R600 test it was supposed to fix as XFAIL.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210792 91177308-0d34-0410-b5e6-96231b3b80d8
Moritz's changes have improved codegen a lot, but further testing showed significant correctness problems. Disable by default until these have been worked out.
Patch by Moritz Roth!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210789 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Also tightened up the acceptable condition operand for these instructions
on MIPS-I to MIPS-III. Support for $fcc[1-7] was added in MIPS-IV. Prior
to that only $fcc0 is acceptable.
We currently don't optimize (BEQZ (NOT $a), $target) and similar. It's
probably best to do this in InstCombine.
Depends on D4111
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4112
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210787 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
These instructions are not implemented for any MIPS ISA so we only need
testcases.
Depends on D4110
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4111
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210786 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Folded mips64-fp-indexed-ls.ll into fp-indexed-ls.ll. To do so, the zext's in
mips64-fp-indexed-ls.ll were changed to implicit sign extensions (performed
by getelementptr). This does not affect the purpose of the test.
Depends on D4004
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4110
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210784 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
c.cond.fmt has been replaced by cmp.cond.fmt. Where c.cond.fmt wrote to
dedicated condition registers, cmp.cond.fmt writes 1 or 0 to normal FGR's
(like the GPR comparisons).
mov[fntz] have been replaced by seleqz and selnez. These instructions
conditionally zero a register based on a bool in a GPR. The results can
then be or'd together to act as a select without, for example, requiring a third
register read port.
mov[fntz].[ds] have been replaced with sel.[ds]
MIPS64r6 currently generates unnecessary sign-extensions for most selects.
This is because the result of a SETCC is currently an i32. Bits 32-63 are
undefined in i32 and the behaviour of seleqz/selnez would otherwise depend
on undefined bits. Later, we will fix this by making the result of SETCC an
i64 on MIPS64 targets.
Depends on D3958
Reviewers: jkolek, vmedic, zoran.jovanovic
Reviewed By: vmedic, zoran.jovanovic
Differential Revision: http://reviews.llvm.org/D4003
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210777 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
To make this work for both AFGR64 and FGR64 register sets, I've had to make the
instruction definition consistent with the white lie (that it reads the lower
32-bits of the register) when they are generated by expandBuildPairF64().
Corrected the definition of hasMips32r2() and hasMips64r2() to include
MIPS32r6 and MIPS64r6.
Depends on D3956
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3957
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210771 91177308-0d34-0410-b5e6-96231b3b80d8
When I originally added node RDTSCP_DAG (r207127) I forgot to add
a string name for it in method 'getTargetNodeName'.
No functional change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210769 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch updates both the assembler and the code generator.
MIPS32r6/MIPS64r6 replaces them with maddf.[ds] and msubf.[ds] which are fused
multiply-add/sub operations. We don't emit these yet, this patch only prevents the removed instructions from being emitted.
Depends on D3955
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3956
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210763 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch disables madd/maddu/msub/msubu in both the assembler and code
generator.
Depends on D3896
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3955
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210762 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The accumulator-based (HI/LO) multiplies and divides from earlier ISA's have
been removed and replaced with GPR-based equivalents. For example:
div $1, $2
mflo $3
is now:
div $3, $1, $2
This patch disables the accumulator-based multiplies and divides for
MIPS32r6/MIPS64r6 and uses the GPR-based equivalents instead.
Renamed expandPseudoDiv to insertDivByZeroTrap to better describe the
behaviour of the function.
MipsDelaySlotFiller now invalidates the liveness information when moving
instructions to the delay slot. Without this, divrem.ll will abort since
%GP ends up used before it is defined.
Reviewers: vmedic, zoran.jovanovic, jkolek
Reviewed By: jkolek
Differential Revision: http://reviews.llvm.org/D3896
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210760 91177308-0d34-0410-b5e6-96231b3b80d8
There is not such thing as a 0-data ds instruction, and the data
operand needs to be a vgpr set to something meaningful.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210756 91177308-0d34-0410-b5e6-96231b3b80d8
The verifier follows GlobalAlias operands so that it can detect cycles of
alias definitions. It was doing this in a way that caused it to also recurse
through initializers for the GlobalValue aliasees, and it would fail when
an initializer refers to a global that is a declaration and not a definition.
This patch causes it to stop recursing when it hits a global definition.
<rdar://problem/17277451>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210734 91177308-0d34-0410-b5e6-96231b3b80d8
construction and destruction.
PassRegistrationListener is intended for use as a generic listener.
In some cases, PassRegistrationListener-derived classes were being
created, and automatically registered and de-registered in static
constructors and destructors. Since ManagedStatics are destroyed
prior to program shutdown, this leads to errors where an attempt is
made to access a ManagedStatic that has already been destroyed.
Reviewed by: rnk, dblaikie
Differential Revision: http://reviews.llvm.org/D4106
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210724 91177308-0d34-0410-b5e6-96231b3b80d8
This destructor is run as part of static program termination, and
so all ManagedStatics (including this lock) will have been
destroyed by llvm_shutdown. Furthermore, if there is actually
a race condition during static program termination, then we are
just hiding a bug somewhere else, because other threads should
not be running at this point.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210717 91177308-0d34-0410-b5e6-96231b3b80d8
This will allow inlining get_magic, which should in turn fix one of the mingw
build problems after the switch to std::error_code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210712 91177308-0d34-0410-b5e6-96231b3b80d8
We weren't doing this before, so all instruction using the *Helper
classes were considered for any ALU slot.
This fixes a hang in the builtin-char-clz-1.0.generated.cl piglit test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210703 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we would always print the offset as decimal, regardless of
the formatting requested. Now we use the formatImm() helper so the value
is printed as the client (LLDB in the motivating example) requested.
Before:
ldr.w r8, [sp, #180] @ always
After:
ldr.w r8, [sp, #0xb4] @ when printing hex immediates
ldr.w r8, [sp, #0180] @ when printing decimal immediates
rdar://17237103
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210701 91177308-0d34-0410-b5e6-96231b3b80d8
This is the same problem fixed in r210664 for more types.
The test passes without this fix. For some reason
I'm only hitting this when creating selects lowered
to v2i32 selects.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210692 91177308-0d34-0410-b5e6-96231b3b80d8
The idea of this patch is to turn llvm/Support/system_error.h into a
transitional header that just brings in the erorr_code api to the llvm
namespace. I will remove it shortly afterwards.
The cases where the general idea needed some tweaking:
* std::errc is a namespace in msvc, so we cannot use "using std::errc". I could
add an #ifdef, but there were not that many uses, so I just added std:: to
them in this patch.
* Template specialization had to be moved to the std namespace in this
patch set already.
* The msvc implementation of default_error_condition doesn't seem to
provide the same transformations as we need. Not too surprising since
the standard doesn't actually say what "equivalent" means. I fixed the
problem by keeping our old mapping and using it at error_code
construction time.
Despite these shortcomings I think this is still a good thing. Some reasons:
* The different implementations of system_error might improve over time.
* It removes 925 lines of code from llvm already.
* It removes 6313 bytes from the text segment of the clang binary when
it is built with gcc and 2816 bytes when building with clang and
libstdc++.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210687 91177308-0d34-0410-b5e6-96231b3b80d8
The manual lists them as *_RTN_U32, not *_U32_RTN, which is more
consistent with how every other sized instruction is named.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210674 91177308-0d34-0410-b5e6-96231b3b80d8
There seem to be only 2 places that produce these,
and it's kind of tricky to hit them.
Also fixes failure to bitcast between i64 and v2f32,
although this for some reason wasn't actually broken in the
simple bitcast testcase, but did in the scalar_to_vector one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210664 91177308-0d34-0410-b5e6-96231b3b80d8
This patch moves part of the logic implemented by the target specific
combine rules added at r210477 to a separate helper function.
This should make easier to add more rules for matching AVX/AVX2 horizontal
adds/subs.
This patch also fixes a problem caused by a wrong check performed on indices
of extract_vector_elt dag nodes in input to the scalar adds/subs.
New tests have been added to verify that we correctly check indices of
extract_vector_elt dag nodes when selecting a horizontal operation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210644 91177308-0d34-0410-b5e6-96231b3b80d8
Pass initialization requires to initialize TargetMachine for back-end
specific passes. This commit creates a new macro INITIALIZE_TM_PASS to
simplify this kind of initialization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210641 91177308-0d34-0410-b5e6-96231b3b80d8
This commit is to improve global merge pass and support global symbol merge.
The global symbol merge is not enabled by default. For aarch64, we need some
more back-end fix to make it really benifit ADRP CSE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210640 91177308-0d34-0410-b5e6-96231b3b80d8
Some c++ libraries (libstdc++ at least) don't seem to map to the generic
category in in the system_category's default_error_condition.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210635 91177308-0d34-0410-b5e6-96231b3b80d8
Most Windows platforms use auxiliary data for unwinding. This information is
stored in the .pdata section. The encoding format for the data differs between
architectures and Windows variants. Windows MIPS and Alpha use identical
formats; Alpha64 is the same with different widths. Windows x86_64 and Itanium
share the representation. All Windows CE entries are identical irrespective of
the architecture. ARMv7 (Windows [NT] on ARM) has its own format.
This enumeration will become the differentiator once the windows EH emission
infrastructure is generalised, allowing us to emit the necessary unwinding
information for Windows on ARM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210634 91177308-0d34-0410-b5e6-96231b3b80d8
MSVC doesn't seem to provide any is_error_code_enum enumeration for the
windows errors.
Fortunately very few places in llvm have to handle raw windows errors, so
we can just construct the corresponding error_code directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210631 91177308-0d34-0410-b5e6-96231b3b80d8
Extract these from some of my other patches, since this
is the only thing really making them dependent on each other.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210627 91177308-0d34-0410-b5e6-96231b3b80d8
DwarfException served as a base class for exception handling directive emission.
However, this is also used by other exception models (e.g. Win64EH). Rename
this class to EHStreamer and split it out of DwarfException.h. NFC.
Use the opportunity to fix up some of the documentation comments to match
current LLVM style. Also rename some functions to conform better with current
LLVM coding style.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210622 91177308-0d34-0410-b5e6-96231b3b80d8
This patch removes the functions llvm_start_multithreaded() and
llvm_stop_multithreaded(), and changes llvm_is_multithreaded()
to return a constant value based on the value of the compile-time
definition LLVM_ENABLE_THREADS.
Previously, it was possible to have compile-time support for
threads on, and runtime support for threads off, in which case
certain mutexes were not allocated or ever acquired. Now, if the
build is created with threads enabled, mutexes are always acquired.
A test before/after patch of compiling a very large TU showed no
noticeable performance impact of this change.
Reviewers: rnk
Differential Revision: http://reviews.llvm.org/D4076
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210600 91177308-0d34-0410-b5e6-96231b3b80d8
I can't get VGPR spilling to work reliable, so for now just emit
an error when the register allocator tries to spill VGPRs.
v2:
- Fix build
v3:
- Added crash fix when spilling SPGRs
v4:
- Use V_MOV_B32 as a dummy instruction instead of S_NOP
Patch by: Darren Powell
https://bugs.freedesktop.org/show_bug.cgi?id=75276
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210588 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r206683.
The code was confusing SEH register numbers with DWARF register numbers.
The test case it was committed with was obviously incorrect. The
disassembler was roundtripping '.seh_pushreg %rsi' as '.seh_pushreg
%rbp', and other exciting things.
Noticed by Vadim Chugunov.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210574 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Implement materialize of floating point literals in Mips Fast-Isel
Reopened version of D3659
Test Plan: simplestorefp1.ll
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4071
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210546 91177308-0d34-0410-b5e6-96231b3b80d8
This patch slightly changes the algorithm introduced at revision 210477
to fix a problem where the algorithm was producing incorrect code for
the VEX.256 encoded versions of horizontal add/sub.
For these cases, we now try to split the two 256-bit vectors into
128-bit chunks before emitting horizontal add/sub dag nodes.
Added a new test case into haddsub-2.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210545 91177308-0d34-0410-b5e6-96231b3b80d8
il is legal for Hexagon, so I should have marked this as Expand for
SELECT_CC when I removed setOperationAction(ISD::SELECT_CC, MVT::Other,
Expand); in r210541.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210544 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, the basic block was searched for future uses of the base register,
and if necessary any writeback to the base register was reset using a SUB
instruction (e.g. before calling a function) just before such a use. However,
this step happened *before* the merged LDM/STM instruction was built. So if
there was (e.g.) a function call directly after the not-yet-formed LDM/STM,
the pass would first insert a SUB instruction to reset the base register,
and then (at the same location, incorrectly) insert the LDM/STM itself.
This patch fixes PR19972. Patch by Moritz Roth.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210542 91177308-0d34-0410-b5e6-96231b3b80d8
The SelectionDAG bad a special case for ISD::SELECT_CC, where it would
allow targets to specify:
setOperationAction(ISD::SELECT_CC, MVT::Other, Expand);
to indicate that they wanted to expand ISD::SELECT_CC for all types.
This wasn't applied correctly everywhere, and it makes writing new
DAG patterns with ISD::SELECT_CC difficult.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210541 91177308-0d34-0410-b5e6-96231b3b80d8
Various masks on shufflevector instructions are recognizable as
specific PowerPC instructions (vector pack, vector merge, etc.).
There is existing code in PPCISelLowering.cpp to recognize the correct
patterns for big endian code. The masks for these instructions are
different for little endian code due to the big-endian numbering
employed by these instructions. This patch adds the recognition code
for little endian.
I've added a new test case test/CodeGen/PowerPC/vec_shuffle_le.ll for
this. The existing recognizer test (vec_shuffle.ll) is unnecessarily
verbose and difficult to read, so I felt it was better to add a new
test rather than modify the old one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210536 91177308-0d34-0410-b5e6-96231b3b80d8
inverted condition codes (CINC, CINV, CNEG, CSET, and CSETM).
Matching aliases based on "immediate classes", when disassembling,
wasn't previously supported, hence adding MCOperandPredicate
into class Operand, and implementing the support for it
in AsmWriterEmitter.
The parsing for those aliases was already custom, so just adding
the missing condition into AArch64AsmParser::parseCondCode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210528 91177308-0d34-0410-b5e6-96231b3b80d8
As Ana Pazos pointed out, these have to be restored to their incoming values
before a function returns; i.e. before the tail call. So they can't be used
correctly as the destination register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210525 91177308-0d34-0410-b5e6-96231b3b80d8
The C++ and C semantics of the compare_and_swap operations actually
require us to return a boolean "success" value. In LLVM terms this
means a second comparison of the output of "cmpxchg" against the input
desired value.
However, x86's "cmpxchg" instruction sets all flags for the comparison
formed, so we can skip any secondary comparison. (N.b. this isn't true
for cmpxchg8b/16b, which only set ZF).
rdar://problem/13201607
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210523 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we were abandonning the attempt, leading to some combination of
extra work (when selection of a load/store fails completely) and inferior code
(when this leads to a real memcpy call instead of inlining).
rdar://problem/17187463
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210520 91177308-0d34-0410-b5e6-96231b3b80d8
We were hitting an assert if FastISel couldn't create the load or store we
requested. Currently this happens for large frame-local addresses, though
CodeGen could be improved there.
rdar://problem/17187463
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210519 91177308-0d34-0410-b5e6-96231b3b80d8
This improves the X86 cost model for small constants with large types. Before
this commit we would even hoist trivial constants such as i96 2.
This is related to <rdar://problem/17070936>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210504 91177308-0d34-0410-b5e6-96231b3b80d8
never be true in a well-defined context. The checking for null pointers
has been moved into the caller logic so it does not rely on undefined behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210497 91177308-0d34-0410-b5e6-96231b3b80d8
The code in PPCTargetLowering::PerformDAGCombine() that handles
unaligned Altivec vector loads generates a lvsl followed by a vperm.
As we've seen in numerous other places, the vperm instruction has a
big-endian bias, and this is fixed for little endian by complementing
the permute control vector and swapping the input operands. In this
case the lvsl is providing the permute control vector. Rather than
generating an lvsl and a complement operation, it is sufficient to
generate an lvsr instruction instead. Thus for LE code generation we
will generate an lvsr rather than an lvsl, and swap the other input
arguments on the vperm.
The existing test/CodeGen/PowerPC/vec_misalign.ll is updated to test
the code generation for PPC64 and PPC64LE, in addition to the existing
PPC32/G5 testing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210493 91177308-0d34-0410-b5e6-96231b3b80d8
Don't terminate location ranges for register-described variables
at the end of machine basic block if this register is never modified
in the function body, except for the prologue and epilogue. Prologue
location is guessed by FrameSetup flags on MachineInstructions, while
epilogue location is deduced from debug locations of instructions
in the basic blocks ending with return instructions.
This patch is mostly targeted to fix non-trivial debug locations for
variables addressed via stack and frame pointers.
It is not really a generic fix. We can still produce poor debug info
for register-described variables if this register *is* modified somewhere
in the function, but in unrelated places. This might be the case for the debug
info in optimized binaries (e.g. for local variables in inlined functions).
LiveDebugVariables pass in CodeGen attempts to fix this problem by adjusting
DBG_VALUE instructions, but this pass is tied to greedy register allocator,
which is used in optimized builds only. Proper fix would likely involve
generalizing LiveDebugVariables to all register allocators. See more discussion
in http://reviews.llvm.org/D3933 review thread.
I'm proceeding with this patch to fix immediate severe problems and
important cases, e.g. fix completely broken debug info with AddressSanitizer
and fix PR19307 (missing debug info for by-value std::string arguments).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210492 91177308-0d34-0410-b5e6-96231b3b80d8
The armv7-windows-itanium environment is nearly identical to the MSVC ABI. It
has a few divergences, mostly revolving around the use of the Itanium ABI for
C++. VLA support is one of the extensions that are amongst the set of the
extensions.
This adds support for proper VLA emission for this environment. This is
somewhat similar to the handling for __chkstk emission on X86 and the large
stack frame emission for ARM. The invocation style for chkstk is still
controlled via the -mcmodel flag to clang.
Make an explicit note that this is an extension.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210489 91177308-0d34-0410-b5e6-96231b3b80d8
Tested and works fine with clang using libstdc++.
All indications are that this was fixed some time ago and isn't a problem with
any clang version we support.
I've added a note in PR6907 which is still open for some reason.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210485 91177308-0d34-0410-b5e6-96231b3b80d8
Support headers shouldn't use config.h definitions, and they should never be
undefined like this.
ConstantFolding.cpp was the only user of this facility and already includes
config.h for other math features, so it makes sense to move the checks there at
point of use.
(The implicit config.h was also quite dangerous -- removing the FEnv.h include
would have silently disabled math constant folding without causing any tests to
fail. Need to investigate -Wundef once the cleanup is done.)
This eliminates the last config.h include from LLVM headers, paving the way for
more consistent configuration checks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210483 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds new target specific combine rules to identify horizontal
add/sub idioms from BUILD_VECTOR dag nodes.
This patch also teaches the DAGCombiner how to canonicalize sequences of
insert_vector_elt dag nodes according to the following rule:
(insert_vector_elt (insert_vector_elt A, I0), I1) ->
(insert_vecto_elt (insert_vector_elt A, I1), I0)
This new canonicalization rule only triggers if the inner insert_vector
dag node has exactly one use; also, both indices must be known constants,
and I1 < I0.
This last rule made it possible to write a simpler algorithm to identify
horizontal add/sub patterns because now we don't have to worry about the
ordering of insert_vector_elt dag nodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210477 91177308-0d34-0410-b5e6-96231b3b80d8
The existing code in PPCTargetLowering::LowerMUL() for multiplying two
v16i8 values assumes that vector elements are numbered in big-endian
order. For little-endian targets, the vector element numbering is
reversed, but the vmuleub, vmuloub, and vperm instructions still
assume big-endian numbering. To account for this, we must adjust the
permute control vector and reverse the order of the input registers on
the vperm instruction.
The existing test/CodeGen/PowerPC/vec_mul.ll is updated to be executed
on powerpc64 and powerpc64le targets as well as the original powerpc
(32-bit) target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210474 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches the backend how to check for the 'NoSignedWrap' flag on
binary operations to improve the emission of 'test' instructions.
If the result of a binary operation is known not to overflow we know that
resetting the Overflow flag is unnecessary and so we can avoid emitting
the test instruction.
Patch by Marcello Maggioni.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210468 91177308-0d34-0410-b5e6-96231b3b80d8
This patch modifies SelectionDAGBuilder to construct SDNodes with associated
NoSignedWrap, NoUnsignedWrap and Exact flags coming from IR BinaryOperator
instructions.
Added a new SDNode type called 'BinaryWithFlagsSDNode' to allow accessing
nsw/nuw/exact flags during codegen.
Patch by Marcello Maggioni.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210467 91177308-0d34-0410-b5e6-96231b3b80d8
According to Intel Software Optimization Manual
on Silvermont INC or DEC instructions require
an additional uop to merge the flags.
As a result, a branch instruction depending
on an INC or a DEC instruction incurs a 1 cycle penalty.
Differential Revision: http://reviews.llvm.org/D3990
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210466 91177308-0d34-0410-b5e6-96231b3b80d8
Instructions from __nodebug__ functions don't have file:line
information even when inlined into no-nodebug functions. As a result,
intrinsics (SSE and other) from <*intrin.h> clang headers _never_
have file:line information.
With this change, an instruction without !dbg metadata gets one from
the call instruction when inlined.
Fixes PR19001.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210459 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a crash on MMX intrinsics, as well as a corner case in handling of
all unsigned pack intrinsics.
PR19953.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210454 91177308-0d34-0410-b5e6-96231b3b80d8
