Canonicallize on the non-suffixed form, but continue to accept assembly that
has any correctly sized type suffix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144583 91177308-0d34-0410-b5e6-96231b3b80d8
register dependency (rather than glue them together). This is general
goodness as it gives scheduler more freedom. However it is motivated by
a nasty bug in isel.
When a i64 sub is expanded to subc + sube.
libcall #1
\
\ subc
\ / \
\ / \
\ / libcall #2
sube
If the libcalls are not serialized (i.e. both have chains which are dag
entry), legalizer can serialize them in arbitrary orders. If it's
unlucky, it can force libcall #2 before libcall #1 in the above case.
subc
|
libcall #2
|
libcall #1
|
sube
However since subc and sube are "glued" together, this ends up being a
cycle when the scheduler combine subc and sube as a single scheduling
unit.
The right solution is to fix LegalizeType too chains the libcalls together.
However, LegalizeType is not processing nodes in order so that's harder than
it should be. For now, the move to physical register dependency will do.
rdar://10019576
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138791 91177308-0d34-0410-b5e6-96231b3b80d8
Fix base register type and canonicallize to the "ldm" spelling rather than
"ldmia." Add diagnostics for incorrect writeback token and out-of-range
registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137986 91177308-0d34-0410-b5e6-96231b3b80d8
(including compilation, assembly). Move relocation model Reloc::Model from
TargetMachine to MCCodeGenInfo so it's accessible even without TargetMachine.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135468 91177308-0d34-0410-b5e6-96231b3b80d8
if (x != 0) x = 1
if (x == 1) x = 1
Previous codegen looks like this:
mov r1, r0
cmp r1, #1
mov r0, #0
moveq r0, #1
The naive lowering select between two different values. It should recognize the
test is equality test so it's more a conditional move rather than a select:
cmp r0, #1
movne r0, #0
rdar://9758317
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135017 91177308-0d34-0410-b5e6-96231b3b80d8
Use memory barriers to force if-conversion off for these tests instead of
the internal llc command line option ifcvt-limit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134986 91177308-0d34-0410-b5e6-96231b3b80d8
The normal tBX instruction is predicable, so there's no reason the
pseudos for using it as a return shouldn't be. Gives us some nice code-gen
improvements as can be seen by the test changes. In particular, several
tests now have to disable if-conversion because it works too well and defeats
the test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134746 91177308-0d34-0410-b5e6-96231b3b80d8
makes one of the tests actually mean something (as the string 'add' will
always appear in the output of this file).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134358 91177308-0d34-0410-b5e6-96231b3b80d8
The DSP instructions in the Thumb2 instruction set are an optional extension
in the Cortex-M* archtitecture. When present, the implementation is considered
an "ARMv7E-M implementation," and when not, an "ARMv7-M implementation."
Add a subtarget feature hook for the v7e-m instructions and hook it up. The
cortex-m3 cpu is an example of a v7m implementation, while the cortex-m4 is
a v7e-m implementation.
rdar://9572992
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134261 91177308-0d34-0410-b5e6-96231b3b80d8
Fix a FIXME and allow predication (in Thumb2) for the T1 register to
register MOV instructions. This allows some better codegen with
if-conversion (as seen in the test updates), plus it lays the groundwork
for pseudo-izing the tMOVCC instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134197 91177308-0d34-0410-b5e6-96231b3b80d8
It's just a t2LDMIA_UPD instruction with extra codegen properties, so it
doesn't need the encoding information. As a side-benefit, we now correctly
recognize for instruction printing as a 'pop' instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134173 91177308-0d34-0410-b5e6-96231b3b80d8
for pre-2.9 bitcode files. We keep x86 unaligned loads, movnt, crc32, and the
target indep prefetch change.
As usual, updating the testsuite is a PITA.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133337 91177308-0d34-0410-b5e6-96231b3b80d8
we try to branch to them.
Before we were creating successor lists with duplicated entries. Fixing that
found a bug in isBlockOnlyReachableByFallthrough that would causes it to
return the wrong answer for
-----------
...
jne foo
jmp bar
foo:
----------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132882 91177308-0d34-0410-b5e6-96231b3b80d8
of reserved registers.
Use RegisterClassInfo in RABasic as well. This slightly changes som
allocation orders because RegisterClassInfo puts CSR aliases last.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132581 91177308-0d34-0410-b5e6-96231b3b80d8
by non-CMP expressions. The executable test case (129821) would test
this as well, if we had an "-O0 -disable-arm-fast-isel" LLVM-GCC
tester. Alas, the ARM assembly would be very difficult to check with
FileCheck.
The thumb2-cbnz.ll test is affected; it generates larger code (tst.w
vs. cmp #0), but I believe the new version is correct.
rdar://problem/9298790
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131261 91177308-0d34-0410-b5e6-96231b3b80d8
Original message:
Teach MachineCSE how to do simple cross-block CSE involving physregs. This allows, for example, eliminating duplicate cmpl's on x86. Part of rdar://problem/8259436 .
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@130877 91177308-0d34-0410-b5e6-96231b3b80d8
These tests all follow the same pattern:
mov r2, r0
movs r0, #0
$CMP r2, r1
it eq
moveq r0, #1
bx lr
The first 'mov' can be eliminated by rematerializing 'movs r0, #0' below the
test instruction:
$CMP r0, r1
mov.w r0, #0
it eq
moveq r0, #1
bx lr
So far, only physreg coalescing can do that. The register allocators won't yet
split live ranges just to eliminate copies. They can learn, but this particular
problem is not likely to show up in real code. It only appears because r0 is
used for both the function argument and return value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@130858 91177308-0d34-0410-b5e6-96231b3b80d8
more callee-saved registers and introduce copies. Only allows it if scheduling
a node above calls would end up lessen register pressure.
Call operands also has added ABI restrictions for register allocation, so be
extra careful with hoisting them above calls.
rdar://9329627
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@130245 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes Thumb2 ADCS and SBCS lowering: <rdar://problem/9275821>.
t2ADCS/t2SBCS are now pseudo instructions, consistent with ARM, so the
assembly printer correctly prints the 's' suffix.
Fixes Thumb2 adde -> SBC matching to check for live/dead carry flags.
Fixes the internal ARM machine opcode mnemonic for ADCS/SBCS.
Fixes ARM SBC lowering to check for live carry (potential bug).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@130048 91177308-0d34-0410-b5e6-96231b3b80d8
