i.e. conditions that cannot be checked with a single instruction. For example,
SETONE and SETUEQ on x86.
- Teach legalizer to implement *illegal* setcc as a and / or of a number of
legal setcc nodes. For now, only implement FP conditions. e.g. SETONE is
implemented as SETO & SETNE, SETUEQ is SETUO | SETEQ.
- Move x86 target over.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57542 91177308-0d34-0410-b5e6-96231b3b80d8
- Move the EH landing-pad code and adjust it so that it works
with FastISel as well as with SDISel.
- Add FastISel support for @llvm.eh.exception and
@llvm.eh.selector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57539 91177308-0d34-0410-b5e6-96231b3b80d8
instead of requiring all "short description" strings to begin with
two spaces. This makes these strings less mysterious, and it fixes
some cases where short description strings mistakenly did not
begin with two spaces.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57521 91177308-0d34-0410-b5e6-96231b3b80d8
create a new DAG node to represent the new shift to keep the
DAG consistent, even though it'll almost always be folded into
the address.
If a user of the resulting address has multiple uses, the
nodes may get revisited by a later MatchAddress call, in which
case DAG inconsistencies do matter.
This fixes PR2849.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57465 91177308-0d34-0410-b5e6-96231b3b80d8
parameters instead of raw Constants. This prevents the constants from
being selected by the isel pass, fixing PR2735.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57385 91177308-0d34-0410-b5e6-96231b3b80d8
the same pattern as roundpd/roundps, the Intel compiler
builtins do not: rounds* has an extra operand. Fixes
gcc.target/i386/sse4_1-rounds[sd]-[1234].c
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57370 91177308-0d34-0410-b5e6-96231b3b80d8
SDISel typically adds them in. This makes it a little easier
to compare FastISel output with SDISel output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57266 91177308-0d34-0410-b5e6-96231b3b80d8
X86::CL that was used, emit an EXTRACT_SUBREG from the CL
super-register to CL. This more precisely describes how the
CL register is being used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57264 91177308-0d34-0410-b5e6-96231b3b80d8
Instead, just create one, and make sure everything that needs
it can access it. Previously most of the SelectionDAGISel
subclasses all had their own TargetLowering object, which was
redundant with the TargetLowering object in the TargetMachine
subclasses, except on Sparc, where SparcTargetMachine
didn't have a TargetLowering object. Change Sparc to work
more like the other targets here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57016 91177308-0d34-0410-b5e6-96231b3b80d8
local register allocator's physreg liveness doesn't recognize subregs,
so it doesn't know that defs of %ecx that are immediately followed by
uses of %cl aren't dead. This comes up due to the way fast-isel emits
shift instructions.
This is a temporary workaround. Arguably, local regalloc should
handle subreg references correctly. On the other hand, perhaps
fast-isel should use INSERT_SUBREG instead of just assigning to the
most convenient super-register of %cl when lowering shifts.
This fixes MultiSource/Benchmarks/MallocBench/espresso,
MultiSource/Applications/hexxagon, and others, under -fast.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56947 91177308-0d34-0410-b5e6-96231b3b80d8
a constant vector ("{0x123, 0x456}" syntax). The fix is to simplify the
_mm_srli_si128 macro, and move the "* 8" from the macro into the compiler
back-end. I can't change the existing __builtins because so many people are
using them :-(."
Patch by Stuart Hastings!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56944 91177308-0d34-0410-b5e6-96231b3b80d8
This allows the 64-bit forms to use+def RSP instead of ESP. This
doesn't fix any real bugs today, but it is more precise and it
makes the debug dumps on x86-64 look more consistent.
Also, add some comments describing the CALL instructions' physreg
operand uses and defs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56925 91177308-0d34-0410-b5e6-96231b3b80d8
`-fno-builtin' flag. Currently, it's used to replace "memset" with "_bzero"
instead of "__bzero" on Darwin10+. This arguably violates the meaning of this
flag, but is currently sufficient. The meaning of this flag should become more
specific over time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56885 91177308-0d34-0410-b5e6-96231b3b80d8
Completely eliminate the TopOrder std::vector. Instead, sort
the AllNodes list in place. This also eliminates the need to
call AllNodes.size(), a linear-time operation, before
performing the sort.
Also, eliminate the Sources temporary std::vector, since it
essentially duplicates the sorted result as it is being
built.
This also changes the direction of the topological sort
from bottom-up to top-down. The AllNodes list starts out in
roughly top-down order, so this reduces the amount of
reordering needed. Top-down is also more convenient for
Legalize, and ISel needed only minor adjustments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56867 91177308-0d34-0410-b5e6-96231b3b80d8
and X86FastISel.cpp into X86MachineFunction.h, so that it
can be shared, instead of having each selector keep track
of its own.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56825 91177308-0d34-0410-b5e6-96231b3b80d8
its size). Adjust various lowering functions to
pass this info through from CallInst. Use it to
implement sseregparm returns on X86. Remove
X86_ssecall calling convention.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56677 91177308-0d34-0410-b5e6-96231b3b80d8
require RIP-relative addressing and use it to fix a bug
in X86FastISel in x86-64 PIC mode, where it was trying to
use base/index registers with RIP-relative addresses. This
fixes a bunch of x86-64 testsuite failures.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56676 91177308-0d34-0410-b5e6-96231b3b80d8
information is in an unreachable block, then it's possible that the high/low pc
values won't be set for the dwarf information. E.g., this function:
void abort(void) __attribute__((__noreturn__));
void dead_beef(void) __attribute__ ((noreturn));
int *b;
void dead_beef(void) {
*b=0xdeadbeef;
abort();
}
has a call to "@llvm.dbg.region.end" only in the unreachable block:
define void @dead_beef() noreturn nounwind {
entry:
call void @llvm.dbg.func.start(...)
call void @llvm.dbg.stoppoint(...)
...
call void @abort( ) noreturn nounwind
unreachable
return: ; No predecessors!
call void @llvm.dbg.stoppoint(...)
call void @llvm.dbg.region.end(...)
ret void
}
The dwarf information emitted is something like:
0x00000084: TAG_subprogram [5]
AT_name( "dead_beef" )
AT_external( 0x01 )
AT_prototyped( 0x01 )
AT_decl_file( 0x01 )
AT_decl_line( 0x08 )
Note that this is *not* the best fix for this problem, but a band-aid for an
gaping wound. This code needs to be changed when we revamp our debugging
information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56628 91177308-0d34-0410-b5e6-96231b3b80d8
s/ParamAttr/Attribute/g
s/PAList/AttrList/g
s/FnAttributeWithIndex/AttributeWithIndex/g
s/FnAttr/Attribute/g
This sets the stage
- to implement function notes as function attributes and
- to distinguish between function attributes and return value attributes.
This requires corresponding changes in llvm-gcc and clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56622 91177308-0d34-0410-b5e6-96231b3b80d8
meaning sse_regparm (i.e. float/double values go
in XMM0 instead of ST0). Update documentation
to reflect reality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56619 91177308-0d34-0410-b5e6-96231b3b80d8