DAG. Disable using "-disable-sched-cycles".
For ARM, this enables a framework for modeling the cpu pipeline and
counting stalls. It also activates several heuristics to drive
scheduling based on the model. Scheduling is inherently imprecise at
this stage, and until spilling is improved it may defeat attempts to
schedule. However, this framework provides greater control over
tuning codegen.
Although the flag is not target-specific, it should have very little
affect on the default scheduler used by x86. The only two changes that
affect x86 are:
- scheduling a high-latency operation bumps the current cycle so independent
operations can have their latency covered. i.e. two independent 4
cycle operations can produce results in 4 cycles, not 8 cycles.
- Two operations with equal register pressure impact and no
latency-based stalls on their uses will be prioritized by depth before height
(height is irrelevant if no stalls occur in the schedule below this point).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123971 91177308-0d34-0410-b5e6-96231b3b80d8
flags. They are still not enable in this revision.
Added TargetInstrInfo::isZeroCost() to fix a fundamental problem with
the scheduler's model of operand latency in the selection DAG.
Generalized unit tests to work with sched-cycles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123969 91177308-0d34-0410-b5e6-96231b3b80d8
value, the "add pc" must be CSE'ed at the same time. We could follow the same
approach as T2 by adding pseudo instructions that combine the ldr + "add pc".
But the better approach is to use movw + movt (which I will enable soon), so
I'll leave this as a TODO.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123949 91177308-0d34-0410-b5e6-96231b3b80d8
TargetInstrInfo:
Change produceSameValue() to take MachineRegisterInfo as an optional argument.
When in SSA form, targets can use it to make more aggressive equality analysis.
Machine LICM:
1. Eliminate isLoadFromConstantMemory, use MI.isInvariantLoad instead.
2. Fix a bug which prevent CSE of instructions which are not re-materializable.
3. Use improved form of produceSameValue.
ARM:
1. Teach ARM produceSameValue to look pass some PIC labels.
2. Look for operands from different loads of different constant pool entries
which have same values.
3. Re-implement PIC GA materialization using movw + movt. Combine the pair with
a "add pc" or "ldr [pc]" to form pseudo instructions. This makes it possible
to re-materialize the instruction, allow machine LICM to hoist the set of
instructions out of the loop and make it possible to CSE them. It's a bit
hacky, but it significantly improve code quality.
4. Some minor bug fixes as well.
With the fixes, using movw + movt to materialize GAs significantly outperform the
load from constantpool method. 186.crafty and 255.vortex improved > 20%, 254.gap
and 176.gcc ~10%.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123905 91177308-0d34-0410-b5e6-96231b3b80d8
with an invalid type then split the result and perform the overflow check
normally.
Fixes the 32-bit parts of rdar://8622122 and rdar://8774702.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123864 91177308-0d34-0410-b5e6-96231b3b80d8
movw r0, :lower16:(L_foo$non_lazy_ptr-(LPC0_0+4))
movt r0, :upper16:(L_foo$non_lazy_ptr-(LPC0_0+4))
LPC0_0:
add r0, pc, r0
It's not yet enabled by default as some tests are failing. I suspect bugs in
down stream tools.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123619 91177308-0d34-0410-b5e6-96231b3b80d8
Also fix an off-by-one in SelectionDAGBuilder that was preventing shuffle
vectors from being translated to EXTRACT_SUBVECTOR.
Patch by Tim Northover.
The test changes are needed to keep those spill-q tests from testing aligned
spills and restores. If the only aligned stack objects are spill slots, we
no longer realign the stack frame. Prior to this patch, an EXTRACT_SUBVECTOR
was legalized by loading from the stack, which created an aligned frame index.
Now, however, there is nothing except the spill slot in the stack frame, so
I added an aligned alloca.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122995 91177308-0d34-0410-b5e6-96231b3b80d8
If the basic block containing the BCCi64 (or BCCZi64) instruction ends with
an unconditional branch, that branch needs to be deleted before appending
the expansion of the BCCi64 to the end of the block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122521 91177308-0d34-0410-b5e6-96231b3b80d8
Type legalization splits up i64 values into pairs of i32 values, which leads
to poor quality code when inserting or extracting i64 vector elements.
If the vector element is loaded or stored, it can be treated as an f64 value
and loaded or stored directly from a VPR register. Use the pre-legalization
DAG combiner to cast those vector elements to f64 types so that the type
legalizer won't mess them up. Radar 8755338.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122319 91177308-0d34-0410-b5e6-96231b3b80d8
may be called. If the entry block is empty, the insertion point iterator will be
the "end()" value. Calling ->getParent() on it (among others) causes problems.
Modify materializeFrameBaseRegister to take the machine basic block and insert
the frame base register at the beginning of that block. (It's very similar to
what the code does all ready. The only difference is that it will always insert
at the beginning of the entry block instead of after a previous materialization
of the frame base register. I doubt that that matters here.)
<rdar://problem/8782198>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122104 91177308-0d34-0410-b5e6-96231b3b80d8
BUILD_VECTOR operands where the element type is not legal. I had previously
changed this code to insert TRUNCATE operations, but that was just wrong.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122102 91177308-0d34-0410-b5e6-96231b3b80d8
Clang is now providing intrinsics for these and so we need to support them
in the backend. Radar 8068427.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121902 91177308-0d34-0410-b5e6-96231b3b80d8
Alignments smaller than the total size of the memory being loaded or stored,
unless the alignment is 8 bytes, are not allowed. Add tests for this, too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121506 91177308-0d34-0410-b5e6-96231b3b80d8
Otherwise, a plain str/ldr should be used instead. Make sure we account for
that in prologue/epilogue code generation.
rdar://8745460
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121391 91177308-0d34-0410-b5e6-96231b3b80d8
Added test to check bl __aeabi_read_tp gets emitted properly for ELF/ASM
as well as ELF/OBJ (including fixup)
Also added support for ELF::R_ARM_TLS_IE32
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121312 91177308-0d34-0410-b5e6-96231b3b80d8
vpush instructions to save / restore VFP / NEON registers like this:
vpush {d8,d10,d11}
vpop {d8,d10,d11}
vpush and vpop do not allow gaps in the register list.
rdar://8728956
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121197 91177308-0d34-0410-b5e6-96231b3b80d8
difficult on current ARM implementations for a few reasons.
1. Even though a single vmla has latency that is one cycle shorter than a pair
of vmul + vadd, a RAW hazard during the first (4? on Cortex-a8) can cause
additional pipeline stall. So it's frequently better to single codegen
vmul + vadd.
2. A vmla folowed by a vmul, vmadd, or vsub causes the second fp instruction to
stall for 4 cycles. We need to schedule them apart.
3. A vmla followed vmla is a special case. Obvious issuing back to back RAW
vmla + vmla is very bad. But this isn't ideal either:
vmul
vadd
vmla
Instead, we want to expand the second vmla:
vmla
vmul
vadd
Even with the 4 cycle vmul stall, the second sequence is still 2 cycles
faster.
Up to now, isel simply avoid codegen'ing fp vmla / vmls. This works well enough
but it isn't the optimial solution. This patch attempts to make it possible to
use vmla / vmls in cases where it is profitable.
A. Add missing isel predicates which cause vmla to be codegen'ed.
B. Make sure the fmul in (fadd (fmul)) has a single use. We don't want to
compute a fmul and a fmla.
C. Add additional isel checks for vmla, avoid cases where vmla is feeding into
fp instructions (except for the #3 exceptional case).
D. Add ARM hazard recognizer to model the vmla / vmls hazards.
E. Add a special pre-regalloc case to expand vmla / vmls when it's likely the
vmla / vmls will trigger one of the special hazards.
Work in progress, only A+B are enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120960 91177308-0d34-0410-b5e6-96231b3b80d8
Lifted adjustFixupValue() from Darwin for sharing w ELF.
Test added
TODO:
refactor ELFObjectWriter::RecordRelocation more.
Possibly share more code with Darwin?
Lots more relocations...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120534 91177308-0d34-0410-b5e6-96231b3b80d8
legalization time. Since at legalization time there is no mapping from
SDNode back to the corresponding LLVM instruction and the return
SDNode is target specific, this requires a target hook to check for
eligibility. Only x86 and ARM support this form of sibcall optimization
right now.
rdar://8707777
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120501 91177308-0d34-0410-b5e6-96231b3b80d8
We need to check if the individual vector elements are sign/zero-extended
values. For now this only handles constants values. Radar 8687140.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120034 91177308-0d34-0410-b5e6-96231b3b80d8
state. Previously Thumb2 would restore sp from fp like this:
mov sp, r7
sub, sp, #4
If an interrupt is taken after the 'mov' but before the 'sub', callee-saved
registers might be clobbered by the interrupt handler. Instead, try
restoring directly from sp:
add sp, #4
Or, if necessary (with VLA, etc.) use a scratch register to compute sp and
then restore it:
sub.w r4, r7, #8
mov sp, r7
rdar://8465407
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119977 91177308-0d34-0410-b5e6-96231b3b80d8
Remove movePastCSLoadStoreOps and associated code for simple pointer
increments. Update routines that depended upon other opcodes for save/restore.
Adjust all testcases accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119725 91177308-0d34-0410-b5e6-96231b3b80d8
appear to differ on Linux. Try to make them pass on Linux.
Would be good for a Linux person to review this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119572 91177308-0d34-0410-b5e6-96231b3b80d8