This change materializes now the value "0" from the zero register.
The zero register can be folded by several instruction, so no
materialization is need at all.
Fixes <rdar://problem/17924413>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215591 91177308-0d34-0410-b5e6-96231b3b80d8
The combiner ignored DBG nodes when checking
the uses of a virtual register.
It combined a sequence like
%vreg1 = madd %vreg2, %vreg3,...
DBG_VALUE (%vreg1 ...)
%vreg4 = add %vreg1,...
to
%vreg4 = madd %vreg2, %vreg3
leaving behind a dangling DBG_VALUE with
a definition. This triggered an assertion
in the MachineTraceMetrics.cpp module.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215431 91177308-0d34-0410-b5e6-96231b3b80d8
be propagated to all its users, and this propagation could increase the
probability of finding common subexpressions. If the COPY has only one user,
the COPY itself can be removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215344 91177308-0d34-0410-b5e6-96231b3b80d8
For best-case performance on Cortex-A57, we should try to use a balanced mix of odd and even D-registers when performing a critical sequence of independent, non-quadword FP/ASIMD floating-point multiply or multiply-accumulate operations.
This pass attempts to detect situations where the register allocation may adversely affect this load balancing and to change the registers used so as to better utilize the CPU.
Ideally we'd just take each multiply or multiply-accumulate in turn and allocate it alternating even or odd registers. However, multiply-accumulates are most efficiently performed in the same functional unit as their accumulation operand. Therefore this pass tries to find maximal sequences ("Chains") of multiply-accumulates linked via their accumulation operand, and assign them all the same "color" (oddness/evenness).
This optimization affects S-register and D-register floating point multiplies and FMADD/FMAs, as well as vector (floating point only) muls and FMADD/FMA. Q register instructions (and 128-bit vector instructions) are not affected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215199 91177308-0d34-0410-b5e6-96231b3b80d8
__stack_chk_guard.
Handle the case where the pointer operand of the load instruction that loads the
stack guard is not a global variable but instead a bitcast.
%StackGuard = load i8** bitcast (i64** @__stack_chk_guard to i8**)
call void @llvm.stackprotector(i8* %StackGuard, i8** %StackGuardSlot)
Original test case provided by Ana Pazos.
This fixes PR20558.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215167 91177308-0d34-0410-b5e6-96231b3b80d8
Re-commit of r214832,r21469 with a work-around that
avoids the previous problem with gcc build compilers
The work-around is to use SmallVector instead of ArrayRef
of basic blocks in preservesResourceLen()/MachineCombiner.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215151 91177308-0d34-0410-b5e6-96231b3b80d8
This implements basic argument lowering for AArch64 in FastISel. It only
handles a small subset of the C calling convention. It supports simple
arguments that can be passed in GPR and FPR registers.
This should cover most of the trivial cases without falling back to
SelectionDAG.
This fixes <rdar://problem/17890986>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214846 91177308-0d34-0410-b5e6-96231b3b80d8
It broke compiling of most Benchmark and internal test, as clang got
clashed by segmentation fault or assertion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214845 91177308-0d34-0410-b5e6-96231b3b80d8
sequence on AArch64
Re-commit of r214669 without changes to test cases
LLVM::CodeGen/AArch64/arm64-neon-mul-div.ll and
LLVM:: CodeGen/AArch64/dp-3source.ll
This resolves the reported compfails of the original commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214832 91177308-0d34-0410-b5e6-96231b3b80d8
This fix changes the parameters #r and #s that are passed to the UBFM/SBFM
instruction to get the zero/sign-extension for free.
The original problem was that the shift left would use the 32-bit shift even for
i8/i16 value types, which could leave the upper bits set with "garbage" values.
The arithmetic shift right on the other side would use the wrong MSB as sign-bit
to determine what bits to shift into the value.
This fixes <rdar://problem/17907720>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214788 91177308-0d34-0410-b5e6-96231b3b80d8
scalar integer instruction pass.
This is a patch I had lying around from a few months ago. The pass is
currently disabled by default, so nothing to interesting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214779 91177308-0d34-0410-b5e6-96231b3b80d8
sequence - AArch64 target support
This patch turns off madd/msub generation in the DAGCombiner and generates
them in the MachineCombiner instead. It replaces the original code sequence
with the combined sequence when it is beneficial to do so.
When there is no machine model support it always generates the madd/msub
instruction. This is true also when the objective is to optimize for code
size: when the combined sequence is shorter is always chosen and does not
get evaluated.
When there is a machine model the combined instruction sequence
is evaluated for critical path and resource length using machine
trace metrics and the original code sequence is replaced when it is
determined to be faster.
rdar://16319955
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214669 91177308-0d34-0410-b5e6-96231b3b80d8
The combiner was creating Q-register loads and stores, which then had to be spilled because there are no callee-save Q registers!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214634 91177308-0d34-0410-b5e6-96231b3b80d8
Add branch weights to branch instructions, so that the following passes can
optimize based on it (i.e. basic block ordering).
Fixes <rdar://problem/17887137>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214537 91177308-0d34-0410-b5e6-96231b3b80d8
ADDS and SUBS cannot encode negative immediates or immediates larger than 12bit.
This fix checks if the immediate version can be used under this constraints and
if we can convert ADDS to SUBS or vice versa to support negative immediates.
Also update the test cases to test the immediate versions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214470 91177308-0d34-0410-b5e6-96231b3b80d8
This commit updates the existing SelectionDAG tests for the stackmap and patchpoint
intrinsics and enables FastISel testing. It also splits up the tests into separate
files, due to different codegen between SelectionDAG and FastISel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214382 91177308-0d34-0410-b5e6-96231b3b80d8
Currently the large code model for MachO uses the GOT to make function calls.
Emit the required adrp and ldr instructions to load the address from the GOT.
Related to <rdar://problem/17733076>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214381 91177308-0d34-0410-b5e6-96231b3b80d8
This improves the code generation for the XALU intrinsics when the
condition is feeding a select instruction.
This also updates and enables the XALU unit tests for FastISel.
This fixes <rdar://problem/17831117>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214350 91177308-0d34-0410-b5e6-96231b3b80d8
Currently the shift-immediate versions are not supported by tblgen and
hopefully this can be later removed, once the required support has been
added to tblgen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214345 91177308-0d34-0410-b5e6-96231b3b80d8
'J' represents a negative number suitable for an add/sub alias
instruction, but while preparing it to become an int64_t we were
mangling the sign extension. So "i32 -1" became 0xffffffffLL, for
example.
Should fix one half of PR20456.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214052 91177308-0d34-0410-b5e6-96231b3b80d8
address of the stack guard was being spilled to the stack.
Previously the address of the stack guard would get spilled to the stack if it
was impossible to keep it in a register. This patch introduces a new target
independent node and pseudo instruction which gets expanded post-RA to a
sequence of instructions that load the stack guard value. Register allocator
can now just remat the value when it can't keep it in a register.
<rdar://problem/12475629>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213967 91177308-0d34-0410-b5e6-96231b3b80d8
This commit implements the frameaddress intrinsic for the AArch64 architecture
in FastISel.
There were two test cases that pretty much tested the same, so I combined them
to a single test case.
Fixes <rdar://problem/17811834>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213959 91177308-0d34-0410-b5e6-96231b3b80d8
which have successfully round-tripped through the combine phase, and use
this to ensure all operands to DAG nodes are visited by the combiner,
even if they are only added during the combine phase.
This is critical to have the combiner reach nodes that are *introduced*
during combining. Previously these would sometimes be visited and
sometimes not be visited based on whether they happened to end up on the
worklist or not. Now we always run them through the combiner.
This fixes quite a few bad codegen test cases lurking in the suite while
also being more principled. Among these, the TLS codegeneration is
particularly exciting for programs that have this in the critical path
like TSan-instrumented binaries (although I think they engineer to use
a different TLS that is faster anyways).
I've tried to check for compile-time regressions here by running llc
over a merged (but not LTO-ed) clang bitcode file and observed at most
a 3% slowdown in llc. Given that this is essentially a worst case (none
of opt or clang are running at this phase) I think this is tolerable.
The actual LTO case should be even less costly, and the cost in normal
compilation should be negligible.
With this combining logic, it is possible to re-legalize as we combine
which is necessary to implement PSHUFB formation on x86 as
a post-legalize DAG combine (my ultimate goal).
Differential Revision: http://reviews.llvm.org/D4638
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213898 91177308-0d34-0410-b5e6-96231b3b80d8
This bug is introduced by r211144. The element of operand may be
smaller than the element of result, but previous commit can
only handle the contrary condition. This commit is to handle this
scenario and generate optimized codes like ZIP1.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213830 91177308-0d34-0410-b5e6-96231b3b80d8
The transform to constant fold unary operations with an AND across a
vector comparison applies when the constant is not a splat of a scalar
as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213800 91177308-0d34-0410-b5e6-96231b3b80d8
The folding of unary operations through a vector compare and mask operation
is only safe if the unary operation result is of the same size as its input.
For example, it's not safe for [su]itofp from v4i32 to v4f64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213799 91177308-0d34-0410-b5e6-96231b3b80d8
I used the wrong method to obtain the return type inside FinishCall. This fix
simply uses the return type from FastLowerCall, which we already determined to
be a valid type.
Reduced test case from Chad. Thanks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213788 91177308-0d34-0410-b5e6-96231b3b80d8
The target-independent DAGcombiner will generate:
asr w1, X, #31 w1 = splat sign bit.
add X, X, w1, lsr #28 X = X + 0 or pow2-1
asr w0, X, asr #4 w0 = X/pow2
However, the add + shifts is expensive, so generate:
add w0, X, 15 w0 = X + pow2-1
cmp X, wzr X - 0
csel X, w0, X, lt X = (X < 0) ? X + pow2-1 : X;
asr w0, X, asr 4 w0 = X/pow2
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213758 91177308-0d34-0410-b5e6-96231b3b80d8
There really is no arm64_be: it was a useful fiction to test big-endian support
while both backends existed in parallel, but now the only platform that uses
the name (iOS) doesn't have a big-endian variant, let alone one called
"arm64_be".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213748 91177308-0d34-0410-b5e6-96231b3b80d8
This commit modifies the existing call lowering functions to be used as the
FastLowerCall and FastLowerIntrinsicCall target-hooks instead.
This enables patchpoint intrinsic lowering for AArch64.
This fixes <rdar://problem/17733076>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213704 91177308-0d34-0410-b5e6-96231b3b80d8
This makes the first stage DAG for @llvm.convert.to.fp16 an fptrunc,
and correspondingly @llvm.convert.from.fp16 an fpext. The legalisation
path is now uniform, regardless of the input IR:
fptrunc -> FP_TO_FP16 (if f16 illegal) -> libcall
fpext -> FP16_TO_FP (if f16 illegal) -> libcall
Each target should be able to select the version that best matches its
operations and not be required to duplicate patterns for both fptrunc
and FP_TO_FP16 (for example).
As a result we can remove some redundant AArch64 patterns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213507 91177308-0d34-0410-b5e6-96231b3b80d8
Because i16 is illegal, there's no native DAG method to
represent a bitcast to or from an f16 type. This meant LLVM was
inserting a stack store/load pair which is really not ideal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213378 91177308-0d34-0410-b5e6-96231b3b80d8
