1
0
mirror of https://github.com/marqs85/ossc.git synced 2024-06-27 09:29:28 +00:00
Commit Graph

85 Commits

Author SHA1 Message Date
borti4938
1a405c1e2e Merge branch 'scanline_contrast' of https://github.com/paulb-nl/ossc into upstream
# Conflicts:
#	rtl/scanconverter.v
#	software/sys_controller/ossc/av_controller.c
2018-03-06 09:30:22 +01:00
paulb-nl
990bc1563e Add Scanline contrast
Reduce scanline strength for bright pixels
2018-02-24 21:56:18 +01:00
borti4938
5249d313d8 scanlines generation via multiplication 2018-02-22 08:11:26 +01:00
marqs
bee64c6fbc allow profile link (to each logical input) via a menu option 2017-12-11 00:51:50 +02:00
Ari Sundholm
04c9137e29 Move default input field from profiles to initconfig
This makes things consistent. Without this change, the default
input would be dictated by the profile associated with AV1.
2017-11-11 00:45:49 +02:00
Ari Sundholm
d638b6a650 Shrink write_userdata() by 20 bytes 2017-11-11 00:25:33 +02:00
Ari Sundholm
571b588da7 Shrink the code by 16 bytes by using an array to map values 2017-11-11 00:25:33 +02:00
Ari Sundholm
ab61fd0c67 Don't save initconfig every time the physical input and profile change
This spares the Flash from some unnecessary writes. If the profile
tied to a physical input changes, this change will be reflected in the
initconfig when the new profile is loaded.
2017-11-11 00:25:33 +02:00
Ari Sundholm
1979bdb333 Save the last profile used for each physical input 2017-11-02 23:38:43 +02:00
marqs
3b8b200d6f Merge branch 'patch-10' of git://github.com/511141/ossc into 511141-patch-10 2017-10-28 12:11:34 +03:00
marqs
a24d6b0e3a Update latency tester
* Enable operation with all sources
* Measure strobe length on low-persistence displays
2017-10-28 12:10:54 +03:00
marqs
4ae3423acb Update Makefile and README 2017-10-26 00:56:07 +03:00
511141
2925ca389b Update menu.c 2017-10-24 03:47:44 +11:00
marqs
1bf279b2a7 Initial latency tester implementation 2017-10-22 22:45:29 +03:00
marqs
4b21a354b4 Fix and optimize reverse lpf activation 2017-10-12 02:31:19 +03:00
marqs
0ab713a870 Merge branch 'lpf' of git://github.com/paulb-nl/ossc into paulb-nl-lpf 2017-10-11 07:36:00 +03:00
marqs
f5f95fe8c3 Merge branch 'patch-9' of git://github.com/511141/ossc into 511141-patch-9 2017-10-11 07:34:25 +03:00
marqs
a0c0620022 Use native 2x sampling only if h_total is below 1400 2017-10-11 07:33:52 +03:00
511141
2ff14280e5 Update
Noticed errors when using prototype board provided.
Additionally simplified specific menu names.
2017-10-01 14:20:50 +11:00
paulb-nl
ac16008076 Add reverse LPF feature
reverse LPF can be used to mostly reverse the blur on pre 1-CHIP SNES.
For best results use 256x240 optimized mode.
2017-09-27 22:43:26 +02:00
marqs
9d14cc776e Misc small fixes and improvements
* Disable 480p scanlines in auto mode
* Remove inoperable 3x/4x processing modes from 1080i list
* Add 640x512 mode to 480p group and limit 480p sampler option to 525-line modes
* Fix occasional pixel repetion issue after HDMI<->DVI TX switch
* Add "Allow upsample2x" option
* Add comments to some unclear sections
2017-08-10 00:06:35 +03:00
marqs
2cd36cdd37 Fix PCM1862 input selection. 2017-06-12 01:00:34 +03:00
marqs85
a8887ce47d Merge pull request #11 from 511141/patch-7
Language update
2017-06-11 11:52:34 +03:00
511141
fb8751da1e language update 2017-06-07 13:17:17 +10:00
marqs
30af6b72f2 Merge branch 'release' of https://github.com/marqs85/ossc into release 2017-06-05 20:04:04 +03:00
borti4938
e9fbf2a1b9 bugfix: screwed up register definitions 2017-06-04 23:24:23 +02:00
marqs
cabc04b3b0 Add support for v1.6 pcb with PCM1862. 2017-06-05 00:02:01 +03:00
borti4938
5b5c8bc373 Update it6613_drv.c
lines outdated
2017-06-01 22:29:24 +02:00
borti4938
b471589ae1 Bugfix: audio down-sampling setting, clock settings 2017-06-01 21:23:22 +02:00
marqs
2aee3294e3 Fix HDTV mode parameters 2017-05-30 21:16:03 +03:00
marqs
2577470abe Clean up TX setup code and add compatibility options 2017-05-29 20:43:24 +03:00
marqs
4f36278cb7 Sync processing rewritten and some issues fixed
* add 480i/576i line3x/4x
* clean up RTL and SDC
* update AVI infoframe properly
* add HDMI IT content option
2017-05-18 23:36:37 +03:00
marqs
01b5fe20ee Sync and masking improvements
* detect VSM=1 properly
* increase mask brightness
* add L2 optimized modes
* fix internal vsync alignment
2017-05-18 23:36:37 +03:00
511141
339454bb8a Language update
Revision 1.5
2017-04-12 12:32:33 +10:00
511141
39fefe2adc Language update
Revision 1.4
2017-04-12 12:04:34 +10:00
511141
5771aa80ec Language update
Revision 1.3
2017-04-12 11:51:21 +10:00
511141
f2910305ee Language update
Update 1.2
2017-04-12 11:16:43 +10:00
511141
0f9e224888 Update menu.c
Revision 1.1
2017-04-10 20:55:21 +10:00
511141
cdad09cbcd JP Language update
Revision 1.0
2017-04-10 19:21:19 +10:00
marqs
97428ba3ad Add 288p line5x modes and hotkey for quick mode select 2017-02-12 02:37:46 +02:00
marqs
2c934c9dd0 Fix line3x 4:3 mode and VGA interlace detection 2017-02-09 23:14:24 +02:00
marqs
6e043ef577 Improve input mode handling
* New options and better compatibility for Line5x
* Add support for 960i and 1080i
* Make TVP HPLL2x option user-selectable
2017-02-07 23:04:30 +02:00
marqs
3b19b2843c Preliminary Line5x implementation 2017-01-29 13:02:12 +02:00
marqs
d41c7522a0 Misc updates
* Fix mask placement and make its brightness adjustable
* Line4x
2017-01-24 00:18:15 +02:00
marqs
434186d64e Improve lo-res mode processing features
* workaround for phase shift issue on optimized modes
* add hscale option for 256x240 opt Line3x mode
* distribute video modes to groups and allow passthru for all modes
2017-01-23 00:56:17 +02:00
marqs
a03c01ca4d Keep track of last used profile and (optionally) input 2017-01-08 12:02:32 +02:00
marqs
d77c293b70 * Clean up some FPGA code
* Wrap sampling phase setting
* Enable hal.enable_lightweight_device_driver_api to reduce CPU code size
2016-12-31 14:18:21 +02:00
marqs
0f8439abf3 Profile support added. 2016-12-30 00:14:12 +02:00
marqs
79f215d41e Minor fixes. 2016-12-27 11:16:08 +02:00
marqs
03bf4c2c9a Update to Quartus 16.1. 2016-12-13 20:55:10 +02:00