subregister operands like this:
%reg1040:sub_32bit<def> = MOV32rm <fi#-2>, 1, %reg0, 0, %reg0, %reg1040<imp-def>; mem:LD4[FixedStack-2](align=8)
Make them return false when subreg operands are present. VirtRegRewriter is
making bad assumptions otherwise.
This fixes PR7713.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109489 91177308-0d34-0410-b5e6-96231b3b80d8
we are using AVX and no AVX version of the desired intruction is present,
this is better for incremental dev (without fallbacks it's easier to spot
what's missing). Not sure this is the best hack thought (we can also disable
all HasSSE* predicates by dinamically marking them 'false' if AVX is present)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109434 91177308-0d34-0410-b5e6-96231b3b80d8
appropriate for targets without detailed instruction iterineries.
The scheduler schedules for increased instruction level parallelism in
low register pressure situation; it schedules to reduce register pressure
when the register pressure becomes high.
On x86_64, this is a win for all tests in CFP2000. It also sped up 256.bzip2
by 16%.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109300 91177308-0d34-0410-b5e6-96231b3b80d8
SSE, so we can't return floating point values if this
is disabled. Detect this error for clang.
With SSE1 only, f64 is a problem; it can be done, but
neither llvm-gcc nor clang has ever generated correct
code for it. Since nobody noticed this I think it's
OK to treat it as an error for now.
This also handles SSE-sized vectors of floating point.
8207686, 8204109.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109201 91177308-0d34-0410-b5e6-96231b3b80d8
rip out the implementation of X86InstrInfo::GetInstSizeInBytes.
The code being ripped out just implemented a copy and hacked up
version of the (old) instruction encoder, and is buggy and
terrible in other ways. Since "GetInstSizeInBytes" is really
only there to support the JIT's "NeedsExactSize" hook (which
noone is using), just rip out the code. I will rip out the
NeedsExactSize hook next.
This resolves rdar://7617809 - switch X86InstrInfo::GetInstSizeInBytes to use X86MCCodeEmitter
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109149 91177308-0d34-0410-b5e6-96231b3b80d8
for lowering without sse2. Add a couple of new testcases.
Fixes a few libgomp tests and latent bugs. Remove a few todos.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109078 91177308-0d34-0410-b5e6-96231b3b80d8
Add 64-bit (GR64) versions of some instructions (which are not
described in their SSE forms, but are described in AVX)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109063 91177308-0d34-0410-b5e6-96231b3b80d8
asmprinter or mangler around. This is option #B for killing off
X86InstrInfo::GetInstSizeInBytes. Option #A (killing
"needsexactsize") was sent for consideration to llvmdev.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109056 91177308-0d34-0410-b5e6-96231b3b80d8
1) all registers were spilled as xmm, regardless of actual size
2) win64 abi doesn't do the varargs-size-in-%al thing
Still to look into:
xmm6-15 are marked as clobbered by call instructions on win64 even though they aren't.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109035 91177308-0d34-0410-b5e6-96231b3b80d8
of AsmPrinter and InstLowering into libx86 and out of the
asmprinter subdirectory. Now X86/AsmPrinter just depends on
MC stuff, not all of codegen and LLVM IR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108782 91177308-0d34-0410-b5e6-96231b3b80d8
instruction, we only want to allow the one for the current subtarget.
- This also fixes suffix matching for jmp instructions, because it eliminates
the ambiguity between 'jmpl' and 'jmpq'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108746 91177308-0d34-0410-b5e6-96231b3b80d8
- Currently includes a hack to limit ourselves to "In32BitMode" and "In64BitMode", because we don't have the other infrastructure to properly deal with setting SSE, etc. features on X86.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108677 91177308-0d34-0410-b5e6-96231b3b80d8
- Unfortunate, but necessary for now to handle subtarget instruction matching. Eventually we should factor out the lower level target machine information so we don't need to do this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108664 91177308-0d34-0410-b5e6-96231b3b80d8
pass that inserted it.
It is no longer necessary to limit the live ranges of FP registers to a single
basic block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108536 91177308-0d34-0410-b5e6-96231b3b80d8
FP_REG_KILL instructions are still inserted, but can be disabled by passing
-live-x87 to llc. The X87FPRegKillInserterPass is going to be removed shortly.
CFG edges are partioned into bundles where the x87 stack must be allocated
identically. Code is insertad at the end of each basic block that shuffles the
live FP registers to match the outgoing bundles expectations.
This fix is in preparation for some upcoming register allocator improvements
that may extend the live range of registers beyond a basic block, similar to
LICM. It also provides a nice runtime speedup if you are building with
-mfpmath=387.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108529 91177308-0d34-0410-b5e6-96231b3b80d8
-enable-no-nans-fp-math and -enable-no-infs-fp-math. All of the current codegen fp math optimizations only care whether the fp arithmetics arguments and results can never be NaN.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108465 91177308-0d34-0410-b5e6-96231b3b80d8
this fixes rdar://8192860. Unfortunately it can only be triggered
with llc because llvm-mc matches another (correctly encoded) version
of this, so no testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108454 91177308-0d34-0410-b5e6-96231b3b80d8
lowering atomics. This will allow those copies to still be coalesced after
TII::isMoveInstr is removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108385 91177308-0d34-0410-b5e6-96231b3b80d8
address cannot be allocated a register is in 32-bit mode where the first
three arguments are marked inreg. In that case EAX, EDX, and ECX will be
used for argument passing.
This fixes PR7610.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108327 91177308-0d34-0410-b5e6-96231b3b80d8
constants, since they may not be emited near the other instructions
which get the same line, and this confuses debug info.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108302 91177308-0d34-0410-b5e6-96231b3b80d8
utility classes can be used from multiple files. This will aid
transitioning to a new refactored x86 SIMD specification.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108213 91177308-0d34-0410-b5e6-96231b3b80d8
getMinimalPhysRegClass. It was used to produce spills, and it is better to
use the most specific class if possible.
Update getLoadStoreRegOpcode to handle GR32_AD.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108115 91177308-0d34-0410-b5e6-96231b3b80d8
We are generating movaps for all XMM register copies, including scalar
floating point values. This is known to be at least as good as movss and movsd
for all known architectures up to and including Nehalem because it avoids a
partial register stall.
The SSEDomainFix pass will switch movaps to movdqa when appropriate (i.e., when
operands come from the integer unit). We don't now that switching movaps to
movapd has any benefit.
The same applies to andps -> pand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108096 91177308-0d34-0410-b5e6-96231b3b80d8
Don't try a cross-class copy. That is very unlikely anywy since return value
registers are usually register class friendly. (%EAX, %XMM0, etc).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108074 91177308-0d34-0410-b5e6-96231b3b80d8
The remaining copyRegToReg calls actually check the return value (shock!), so we
cannot trivially replace them with COPY instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108069 91177308-0d34-0410-b5e6-96231b3b80d8
Based on a patch by Rafael Espíndola.
Attempt to make the FpSET_ST1 hack more robust, but we are still relying on
FpSET_ST0 preceeding it. This is only for supporting really weird x87 inline
asm.
We support:
FpSET_ST0
INLINEASM
FpSET_ST0
FpSET_ST1
INLINEASM
with and without kills on the arguments. We don't support:
FpSET_ST1
FpSET_ST0
INLINEASM
nor
FpSET_ST1
INLINEASM
Just Don't Do It!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108047 91177308-0d34-0410-b5e6-96231b3b80d8
- Check getBytesToPopOnReturn().
- Eschew ST0 and ST1 for return values.
- Fix the PIC base register initialization so that it doesn't ever
fail to end up the top of the entry block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108039 91177308-0d34-0410-b5e6-96231b3b80d8
it is popped, even if it is ununsed. A CopyFromReg node is too weak to represent
the required sideeffect, so insert an FpGET_ST0 instruction directly instead.
This will matter when CopyFromReg gets lowered to a generic COPY instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108037 91177308-0d34-0410-b5e6-96231b3b80d8
notes:
- The instructions are being added with dummy placeholder patterns using some 256
specifiers, this is not meant to work now, but since there are some multiclasses
generic enough to accept them, when we go for codegen, the stuff will be already
there.
- Add VEX encoding bits to support YMM
- Add MOVUPS and MOVAPS in the first round
- Use "Y" as suffix for those Instructions: MOVUPSYrr, ...
- All AVX instructions in X86InstrSSE.td will move soon to a new X86InstrAVX
file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107996 91177308-0d34-0410-b5e6-96231b3b80d8
U utils/TableGen/FastISelEmitter.cpp
--- Reverse-merging r107943 into '.':
U test/CodeGen/X86/fast-isel.ll
U test/CodeGen/X86/fast-isel-loads.ll
U include/llvm/Target/TargetLowering.h
U include/llvm/Support/PassNameParser.h
U include/llvm/CodeGen/FunctionLoweringInfo.h
U include/llvm/CodeGen/CallingConvLower.h
U include/llvm/CodeGen/FastISel.h
U include/llvm/CodeGen/SelectionDAGISel.h
U lib/CodeGen/LLVMTargetMachine.cpp
U lib/CodeGen/CallingConvLower.cpp
U lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp
U lib/CodeGen/SelectionDAG/FunctionLoweringInfo.cpp
U lib/CodeGen/SelectionDAG/FastISel.cpp
U lib/CodeGen/SelectionDAG/SelectionDAGISel.cpp
U lib/CodeGen/SelectionDAG/ScheduleDAGSDNodes.cpp
U lib/CodeGen/SelectionDAG/InstrEmitter.cpp
U lib/CodeGen/SelectionDAG/TargetLowering.cpp
U lib/Target/XCore/XCoreISelLowering.cpp
U lib/Target/XCore/XCoreISelLowering.h
U lib/Target/X86/X86ISelLowering.cpp
U lib/Target/X86/X86FastISel.cpp
U lib/Target/X86/X86ISelLowering.h
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107987 91177308-0d34-0410-b5e6-96231b3b80d8
jumps where possible and turning the TAILCALL marker in the instruction
asm string into a proper comment.
This eliminates a FIXME and is on the path to finishing:
rdar://7639610 - eliminate encoding and asm info for TAILJMPd TAILJMPr TAILJMPn, etc.
However, I can't eliminate the encodings for these instructions because the JIT
still exists and has its own copy of the encoder, sigh.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107946 91177308-0d34-0410-b5e6-96231b3b80d8
like all other instructions, even though a segment is not
allowed. This resolves a bunch of gross hacks in the
encoder and makes LEA more consistent with the rest of the
instruction set.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107934 91177308-0d34-0410-b5e6-96231b3b80d8
in memory operands at the same type as hard coded segments.
This fixes problems where we'd emit the segment override after
the REX prefix on instructions like:
mov %gs:(%rdi), %rax
This fixes rdar://8127102. I have several cleanup patches coming
next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107917 91177308-0d34-0410-b5e6-96231b3b80d8
returns the start of the memory operand for an instruction.
Introduce a new "X86AddrSegment" enum to reduce # magic numbers
referring to X86 memory operand layout.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107916 91177308-0d34-0410-b5e6-96231b3b80d8
This pass runs before COPY instructions are passed to copyPhysReg, so we simply
translate COPY to the proper pseudo instruction. Note that copyPhysReg does not
handle floating point stack copies.
Once COPY is used everywhere, this can be cleaned up a bit, and most of the
pseudo instructions can be removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107899 91177308-0d34-0410-b5e6-96231b3b80d8
EXTRACT_SUBREG no longer appears as a machine instruction. Use COPY instead.
Add isCopy() checks in many places using isMoveInstr() and isExtractSubreg().
The isMoveInstr hook will be removed later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107879 91177308-0d34-0410-b5e6-96231b3b80d8
around everywhere, and also give it an InsertPt member, to enable isel
to operate at an arbitrary position within a block, rather than just
appending to a block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107791 91177308-0d34-0410-b5e6-96231b3b80d8
instance, rather than pointers to all of FunctionLoweringInfo's
members.
This eliminates an NDEBUG ABI sensitivity.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107789 91177308-0d34-0410-b5e6-96231b3b80d8