Don't try a cross-class copy. That is very unlikely anywy since return value
registers are usually register class friendly. (%EAX, %XMM0, etc).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108074 91177308-0d34-0410-b5e6-96231b3b80d8
correct alignment information, which simplifies ExpandRes_VAARG a bit.
The patch introduces a new alignment information to TargetLoweringInfo. This is
needed since the two natural candidates cannot be used:
* The 's' in target data: If this is set to the minimal alignment of any
argument, getCallFrameTypeAlignment would return 4 for doubles on ARM for
example.
* The getTransientStackAlignment method. It is possible for an architecture to
have argument less aligned than what we maintain the stack pointer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108072 91177308-0d34-0410-b5e6-96231b3b80d8
The remaining copyRegToReg calls actually check the return value (shock!), so we
cannot trivially replace them with COPY instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108069 91177308-0d34-0410-b5e6-96231b3b80d8
Based on a patch by Rafael Espíndola.
Attempt to make the FpSET_ST1 hack more robust, but we are still relying on
FpSET_ST0 preceeding it. This is only for supporting really weird x87 inline
asm.
We support:
FpSET_ST0
INLINEASM
FpSET_ST0
FpSET_ST1
INLINEASM
with and without kills on the arguments. We don't support:
FpSET_ST1
FpSET_ST0
INLINEASM
nor
FpSET_ST1
INLINEASM
Just Don't Do It!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108047 91177308-0d34-0410-b5e6-96231b3b80d8
- Check getBytesToPopOnReturn().
- Eschew ST0 and ST1 for return values.
- Fix the PIC base register initialization so that it doesn't ever
fail to end up the top of the entry block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108039 91177308-0d34-0410-b5e6-96231b3b80d8
it is popped, even if it is ununsed. A CopyFromReg node is too weak to represent
the required sideeffect, so insert an FpGET_ST0 instruction directly instead.
This will matter when CopyFromReg gets lowered to a generic COPY instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108037 91177308-0d34-0410-b5e6-96231b3b80d8
notes:
- The instructions are being added with dummy placeholder patterns using some 256
specifiers, this is not meant to work now, but since there are some multiclasses
generic enough to accept them, when we go for codegen, the stuff will be already
there.
- Add VEX encoding bits to support YMM
- Add MOVUPS and MOVAPS in the first round
- Use "Y" as suffix for those Instructions: MOVUPSYrr, ...
- All AVX instructions in X86InstrSSE.td will move soon to a new X86InstrAVX
file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107996 91177308-0d34-0410-b5e6-96231b3b80d8
U utils/TableGen/FastISelEmitter.cpp
--- Reverse-merging r107943 into '.':
U test/CodeGen/X86/fast-isel.ll
U test/CodeGen/X86/fast-isel-loads.ll
U include/llvm/Target/TargetLowering.h
U include/llvm/Support/PassNameParser.h
U include/llvm/CodeGen/FunctionLoweringInfo.h
U include/llvm/CodeGen/CallingConvLower.h
U include/llvm/CodeGen/FastISel.h
U include/llvm/CodeGen/SelectionDAGISel.h
U lib/CodeGen/LLVMTargetMachine.cpp
U lib/CodeGen/CallingConvLower.cpp
U lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp
U lib/CodeGen/SelectionDAG/FunctionLoweringInfo.cpp
U lib/CodeGen/SelectionDAG/FastISel.cpp
U lib/CodeGen/SelectionDAG/SelectionDAGISel.cpp
U lib/CodeGen/SelectionDAG/ScheduleDAGSDNodes.cpp
U lib/CodeGen/SelectionDAG/InstrEmitter.cpp
U lib/CodeGen/SelectionDAG/TargetLowering.cpp
U lib/Target/XCore/XCoreISelLowering.cpp
U lib/Target/XCore/XCoreISelLowering.h
U lib/Target/X86/X86ISelLowering.cpp
U lib/Target/X86/X86FastISel.cpp
U lib/Target/X86/X86ISelLowering.h
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107987 91177308-0d34-0410-b5e6-96231b3b80d8
jumps where possible and turning the TAILCALL marker in the instruction
asm string into a proper comment.
This eliminates a FIXME and is on the path to finishing:
rdar://7639610 - eliminate encoding and asm info for TAILJMPd TAILJMPr TAILJMPn, etc.
However, I can't eliminate the encodings for these instructions because the JIT
still exists and has its own copy of the encoder, sigh.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107946 91177308-0d34-0410-b5e6-96231b3b80d8
like all other instructions, even though a segment is not
allowed. This resolves a bunch of gross hacks in the
encoder and makes LEA more consistent with the rest of the
instruction set.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107934 91177308-0d34-0410-b5e6-96231b3b80d8
in memory operands at the same type as hard coded segments.
This fixes problems where we'd emit the segment override after
the REX prefix on instructions like:
mov %gs:(%rdi), %rax
This fixes rdar://8127102. I have several cleanup patches coming
next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107917 91177308-0d34-0410-b5e6-96231b3b80d8
returns the start of the memory operand for an instruction.
Introduce a new "X86AddrSegment" enum to reduce # magic numbers
referring to X86 memory operand layout.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107916 91177308-0d34-0410-b5e6-96231b3b80d8
This pass runs before COPY instructions are passed to copyPhysReg, so we simply
translate COPY to the proper pseudo instruction. Note that copyPhysReg does not
handle floating point stack copies.
Once COPY is used everywhere, this can be cleaned up a bit, and most of the
pseudo instructions can be removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107899 91177308-0d34-0410-b5e6-96231b3b80d8
EXTRACT_SUBREG no longer appears as a machine instruction. Use COPY instead.
Add isCopy() checks in many places using isMoveInstr() and isExtractSubreg().
The isMoveInstr hook will be removed later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107879 91177308-0d34-0410-b5e6-96231b3b80d8
(X >s -1) ? C1 : C2 and (X <s 0) ? C2 : C1
into ((X >>s 31) & (C2 - C1)) + C1, avoiding the conditional.
This optimization could be extended to take non-const C1 and C2 but we better
stay conservative to avoid code size bloat for now.
for
int sel(int n) {
return n >= 0 ? 60 : 100;
}
we now generate
sarl $31, %edi
andl $40, %edi
leal 60(%rdi), %eax
instead of
testl %edi, %edi
movl $60, %ecx
movl $100, %eax
cmovnsl %ecx, %eax
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107866 91177308-0d34-0410-b5e6-96231b3b80d8
1. The arguments are f32.
2. The arguments are loads and they have no uses other than the comparison.
3. The comparison code is EQ or NE.
e.g.
vldr.32 s0, [r1]
vldr.32 s1, [r0]
vcmpe.f32 s1, s0
vmrs apsr_nzcv, fpscr
beq LBB0_2
=>
ldr r1, [r1]
ldr r0, [r0]
cmp r0, r1
beq LBB0_2
More complicated cases will be implemented in subsequent patches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107852 91177308-0d34-0410-b5e6-96231b3b80d8
Add explicit testcases for tail calls within the same module.
Duplicate some code to humor those who think .w doesn't apply on ARM.
Leave this disabled on Thumb1, and add some comments explaining why it's hard
and won't gain much.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107851 91177308-0d34-0410-b5e6-96231b3b80d8