This handles the simplest case for mov -> push conversion:
1. x86-32 calling convention, everything is passed through the stack.
2. There is no reserved call frame.
3. Only registers or immediates are pushed, no attempt to combine a mem-reg-mem sequence into a single PUSHmm.
Differential Revision: http://reviews.llvm.org/D6503
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223757 91177308-0d34-0410-b5e6-96231b3b80d8
Don't assume that the forward referenced entity was of the same
global-kind as the new entity.
This fixes PR21779.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223754 91177308-0d34-0410-b5e6-96231b3b80d8
CodeGen/PowerPC/vsx-p8.ll was failing.
'+power8-vector' is not a recognized feature for this target (ignoring feature)
llvm/test/CodeGen/PowerPC/vsx-p8.ll:33:14: error: expected string not found in input
; CHECK-REG: lxvw4x 34, 0, 3
^
<stdin>:50:2: note: scanning from here
.align 3
^
<stdin>:61:2: note: possible intended match here
lvx 3, 0, 3
^
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223729 91177308-0d34-0410-b5e6-96231b3b80d8
The aggressive anti-dep breaker, used by the PowerPC backend during post-RA
scheduling (but is available to all targets), did not handle early-clobber MI
operands (at all). When constructing the list of available registers for the
replacement of some def operand, check the using instructions, and remove
registers assigned to early-clobbered defs from the set.
Fixes PR21452.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223727 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes an issue with ScheduleDAGInstrs::buildSchedGraph
where stores without an underlying object would not be added
as a predecessor to the current BarrierChain.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223717 91177308-0d34-0410-b5e6-96231b3b80d8
GCC accepts 'cc' as an alias for 'cr0', and we need to do the same when
processing inline asm constraints. This had previously been implemented using a
non-allocatable register, named 'cc', that was listed as an alias of 'cr0', but
the infrastructure does not seem to support this properly (neither the register
allocator nor the scheduler properly accounts for the alias). Instead, we can
just process this as a naming alias inside of the inline asm
constraint-processing code, so we'll do that instead.
There are two regression tests, one where the post-RA scheduler did the wrong
thing with the non-allocatable alias, and one where the register allocator did
the wrong thing. Fixes PR21742.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223708 91177308-0d34-0410-b5e6-96231b3b80d8
We were already lazily linking functions, but all GlobalValues can be treated
uniformly for this.
The test updates are to ensure that a given GlobalValue is still linked in.
This fixes pr21494.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223681 91177308-0d34-0410-b5e6-96231b3b80d8
Fix a compact unwind encoding logic bug which would try to encode
more callee saved registers than it should, leading to early bail out
in the encoding logic and abusive use of DWARF frame mode unnecessarily.
Also remove no-compact-unwind.ll which was testing the wrong thing
based on this bug and move it to valid 'compact unwind' tests. Added
other few more tests too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223676 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce the ``llvm.instrprof_increment`` intrinsic and the
``-instrprof`` pass. These provide the infrastructure for writing
counters for profiling, as in clang's ``-fprofile-instr-generate``.
The implementation of the instrprof pass is ported directly out of the
CodeGenPGO classes in clang, and with the followup in clang that rips
that code out to use these new intrinsics this ends up being NFC.
Doing the instrumentation this way opens some doors in terms of
improving the counter performance. For example, this will make it
simple to experiment with alternate lowering strategies, and allows us
to try handling profiling specially in some optimizations if we want
to.
Finally, this drastically simplifies the frontend and puts all of the
lowering logic in one place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223672 91177308-0d34-0410-b5e6-96231b3b80d8
Teach ISel how to match a TZCNT/LZCNT from a conditional move if the
condition code is X86_COND_NE.
Existing tablegen patterns only allowed to match TZCNT/LZCNT from a
X86cond with condition code equal to X86_COND_E. To avoid introducing
extra rules, I added an 'ImmLeaf' definition that checks if the
condition code is COND_E or COND_NE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223668 91177308-0d34-0410-b5e6-96231b3b80d8
Before this patch, the backend sub-optimally expanded the non-constant shift
count of a v8i16 shift into a sequence of two 'movd' plus 'movzwl'.
With this patch the backend checks if the target features sse4.1. If so, then
it lets the shuffle legalizer deal with the expansion of the shift amount.
Example:
;;
define <8 x i16> @test(<8 x i16> %A, <8 x i16> %B) {
%shamt = shufflevector <8 x i16> %B, <8 x i16> undef, <8 x i32> zeroinitializer
%shl = shl <8 x i16> %A, %shamt
ret <8 x i16> %shl
}
;;
Before (with -mattr=+avx):
vmovd %xmm1, %eax
movzwl %ax, %eax
vmovd %eax, %xmm1
vpsllw %xmm1, %xmm0, %xmm0
retq
Now:
vpxor %xmm2, %xmm2, %xmm2
vpblendw $1, %xmm1, %xmm2, %xmm1
vpsllw %xmm1, %xmm0, %xmm0
retq
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223660 91177308-0d34-0410-b5e6-96231b3b80d8
X86ISelLowering.cpp has a long switch for intrinsics. I moved a part of
this long switch to the new intrinsics table in X86IntrinsicsInfo.h.
No functional changes, just code and compile time optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223641 91177308-0d34-0410-b5e6-96231b3b80d8
r223618 including special handling of `MDNode::intersect()`: if the
first operand is a self-reference with the same operands you're trying
to return, return it instead.
Reuse that handling in `MDNode::concatenate()` in the hopes that it
fixes a polly test that seems to rely on the old behaviour [1].
[1]: http://lab.llvm.org:8011/builders/polly-amd64-linux/builds/25167
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223619 91177308-0d34-0410-b5e6-96231b3b80d8
It doesn't make sense to unique self-referencing nodes. Drop uniquing
for them.
Note that `MDNode::intersect()` occasionally returns self-referencing
nodes. Previously these would be returned by `MDNode::get()`. I'm not
convinced this was intended behaviour -- to me it seems it should return
a node whose only operand is the self-reference -- but I don't know much
about alias scopes so I'm preserving it for now.
This is part of PR21532.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223618 91177308-0d34-0410-b5e6-96231b3b80d8
Add assembly and bitcode tests that I neglected to add in r223564 (IR:
Disallow complicated function-local metadata) and r223574 (IR: Disallow
function-local metadata attachments).
Found a couple of bugs:
- The error message for function-local attachments gave the wrong line
number -- it indicated the next token (typically on the next line)
instead of the token that started the attachment. Fixed.
- Metadata arguments of the form `!{i32 0, i32 %v}` (or with the
arguments reversed) fired an assertion in `ValueEnumerator` in LLVM
v3.5, so I suppose this never really worked. I suppose this was
"fixed" by r223564.
(Thanks to dblaikie for pointing out my omission.)
Part of PR21532.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223616 91177308-0d34-0410-b5e6-96231b3b80d8
There are 3 changes:
- Convert 32-bit S_LSHL/LSHR/ASHR to their V_*REV variants for VI
- Lower RSQ_CLAMP for VI
- Don't generate MIN/MAX_LEGACY on VI
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223604 91177308-0d34-0410-b5e6-96231b3b80d8
DenseSet used to be implemented as DenseMap<Key, char>, which usually doubled
the memory footprint of the map. Now we use a compressed set so the second
element uses no memory at all. This required some surgery on DenseMap as
all accesses to the bucket now have to go through methods; this should
have no impact on the behavior of DenseMap though. The new default bucket
type for DenseMap is a slightly extended std::pair as we expose it through
DenseMap's iterator and don't want to break any existing users.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223588 91177308-0d34-0410-b5e6-96231b3b80d8
Consider:
void f() {}
void __attribute__((weak)) g() {}
bool b = &f != &g;
It's possble for g to resolve to f if --defsym=g=f is passed on to the
linker.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223585 91177308-0d34-0410-b5e6-96231b3b80d8
This can significantly reduce the size of the switch, allowing for more
efficient lowering.
I also worked with the idea of exploiting unreachable defaults by
omitting the range check for jump tables, but always ended up with a
non-neglible binary size increase. It might be worth looking into some more.
SimplifyCFG currently does this transformation, but I'm working towards changing
that so we can optimize harder based on unreachable defaults.
Differential Revision: http://reviews.llvm.org/D6510
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223566 91177308-0d34-0410-b5e6-96231b3b80d8
Disallow complex types of function-local metadata. The only valid
function-local metadata is an `MDNode` whose sole argument is a
non-metadata function-local value.
Part of PR21532.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223564 91177308-0d34-0410-b5e6-96231b3b80d8
All our patterns use MVT::i64, but the ISelLowering nodes were inconsistent in
their choice.
No functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223551 91177308-0d34-0410-b5e6-96231b3b80d8
Fix the poor codegen seen in PR21710 ( http://llvm.org/bugs/show_bug.cgi?id=21710 ).
Before we crack 32-byte build vectors into smaller chunks (and then subsequently
glue them back together), we should look for the easy case where we can just load
all elements in a single op.
An example of the codegen change is:
From:
vmovss 16(%rdi), %xmm1
vmovups (%rdi), %xmm0
vinsertps $16, 20(%rdi), %xmm1, %xmm1
vinsertps $32, 24(%rdi), %xmm1, %xmm1
vinsertps $48, 28(%rdi), %xmm1, %xmm1
vinsertf128 $1, %xmm1, %ymm0, %ymm0
retq
To:
vmovups (%rdi), %ymm0
retq
Differential Revision: http://reviews.llvm.org/D6536
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223518 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Follow up to [x32] "Use ebp/esp as frame and stack pointer":
http://reviews.llvm.org/D4617
In that earlier patch, NaCl64 was made to always use rbp.
That's needed for most cases because rbp should hold a full
64-bit address within the NaCl sandbox so that load/stores
off of rbp don't require sandbox adjustment (zeroing the top
32-bits, then filling those by adding r15).
However, llvm.frameaddress returns a pointer and pointers
are 32-bit for NaCl64. In this case, use ebp instead, which
will make the register copy type check. A similar mechanism
may be needed for llvm.eh.return, but is not added in this change.
Test Plan: test/CodeGen/X86/frameaddr.ll
Reviewers: dschuff, nadav
Subscribers: jfb, llvm-commits
Differential Revision: http://reviews.llvm.org/D6514
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223510 91177308-0d34-0410-b5e6-96231b3b80d8
SSE2/AVX non-constant packed shift instructions only use the lower 64-bit of
the shift count.
This patch teaches function 'getTargetVShiftNode' how to deal with shifts
where the shift count node is of type MVT::i64.
Before this patch, function 'getTargetVShiftNode' only knew how to deal with
shift count nodes of type MVT::i32. This forced the backend to wrongly
truncate the shift count to MVT::i32, and then zero-extend it back to MVT::i64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223505 91177308-0d34-0410-b5e6-96231b3b80d8
When a loop gets bundled up, its outgoing edges are quite large, and can
just barely overflow 64-bits. If one successor has multiple incoming
edges -- and that successor is getting all the incoming mass --
combining just its edges can overflow. Handle that by saturating rather
than asserting.
This fixes PR21622.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223500 91177308-0d34-0410-b5e6-96231b3b80d8
Required some APInt massaging to get proper empty/tombstone values. Apart
from making the code a bit simpler this also reduces the bucket size of
the ConstantInt map from 32 to 24 bytes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223478 91177308-0d34-0410-b5e6-96231b3b80d8
Do not realign origin address if the corresponding application
address is at least 4-byte-aligned.
Saves 2.5% code size in track-origins mode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223464 91177308-0d34-0410-b5e6-96231b3b80d8
When lowering a vector shift node, the backend checks if the shift count is a
shuffle with a splat mask. If so, then it introduces an extra dag node to
extract the splat value from the shuffle. The splat value is then used
to generate a shift count of a target specific shift.
However, if we know that the shift count is a splat shuffle, we can use the
splat index 'I' to extract the I-th element from the first shuffle operand.
The advantage is that the splat shuffle may become dead since we no longer
use it.
Example:
;;
define <4 x i32> @example(<4 x i32> %a, <4 x i32> %b) {
%c = shufflevector <4 x i32> %b, <4 x i32> undef, <4 x i32> zeroinitializer
%shl = shl <4 x i32> %a, %c
ret <4 x i32> %shl
}
;;
Before this patch, llc generated the following code (-mattr=+avx):
vpshufd $0, %xmm1, %xmm1 # xmm1 = xmm1[0,0,0,0]
vpxor %xmm2, %xmm2
vpblendw $3, %xmm1, %xmm2, %xmm1 # xmm1 = xmm1[0,1],xmm2[2,3,4,5,6,7]
vpslld %xmm1, %xmm0, %xmm0
retq
With this patch, the redundant splat operation is removed from the code.
vpxor %xmm2, %xmm2
vpblendw $3, %xmm1, %xmm2, %xmm1 # xmm1 = xmm1[0,1],xmm2[2,3,4,5,6,7]
vpslld %xmm1, %xmm0, %xmm0
retq
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223461 91177308-0d34-0410-b5e6-96231b3b80d8
The test file test/CodeGen/ARM/build-attributes.ll was missing several
floating-point build attribute tests. The intention of this commit is that for
each CPU / architecture currently tested, there are now tests that make sure
the following attributes are sufficiently checked,
* Tag_ABI_FP_rounding
* Tag_ABI_FP_denormal
* Tag_ABI_FP_exceptions
* Tag_ABI_FP_user_exceptions
* Tag_ABI_FP_number_model
Also in this commit, the -unsafe-fp-math flag has been augmented with the full
suite of flags Clang sends to LLVM when you pass -ffast-math to Clang. That is,
`-unsafe-fp-math' has been changed to `-enable-unsafe-fp-math -disable-fp-elim
-enable-no-infs-fp-math -enable-no-nans-fp-math -fp-contract=fast'
Change-Id: I35d766076bcbbf09021021c0a534bf8bf9a32dfc
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223454 91177308-0d34-0410-b5e6-96231b3b80d8