Currently it just holds the calling convention and flags
for isVarArgs and isTailCall.
And it has several utility methods, which eliminate magic
5+2*i and similar index computations in several places.
CallSDNodes are not CSE'd. Teach UpdateNodeOperands to handle
nodes that are not CSE'd gracefully.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56183 91177308-0d34-0410-b5e6-96231b3b80d8
ConstantFP* instead of APInt and APFloat directly.
This reduces the amount of time to create ConstantSDNode
and ConstantFPSDNode nodes when ConstantInt* and ConstantFP*
respectively are already available, as is the case in
SelectionDAGBuild.cpp. Also, it reduces the amount of time
to legalize constants into constant pools, and the amount of
time to add ConstantFP operands to MachineInstrs, due to
eliminating ConstantInt::get and ConstantFP::get calls.
It increases the amount of work needed to create new constants
in cases where the client doesn't already have a ConstantInt*
or ConstantFP*, such as legalize expanding 64-bit integer constants
to 32-bit constants. And it adds a layer of indirection for the
accessor methods. But these appear to be outweight by the benefits
in most cases.
It will also make it easier to make ConstantSDNode and
ConstantFPNode more consistent with ConstantInt and ConstantFP.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56162 91177308-0d34-0410-b5e6-96231b3b80d8
with ConstantInt. This led to fixing a bug in TargetLowering.cpp
using getValue instead of getAPIntValue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56159 91177308-0d34-0410-b5e6-96231b3b80d8
cmp-and-swap reversed the Cmp and Swap arguments; comments
make it clear this is unintentional. Unfortunately, the
x86 BE had a compensating reversal, which is removed here.
PPC is OK.
From inspection of the Alpha code I think it is OK, but
if somebody has that platform please check it out. I
cannot test on that platform.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56091 91177308-0d34-0410-b5e6-96231b3b80d8
ATOMIC_LOAD_ADD_{8,16,32,64} instead of ATOMIC_LOAD_ADD.
Increased the Hardcoded Constant OpActionsCapacity to match.
Large but boring; no functional change.
This is to support partial-word atomics on ppc; i8 is
not a valid type there, so by the time we get to lowering, the
ATOMIC_LOAD nodes looks the same whether the type was i8 or i32.
The information can be added to the AtomicSDNode, but that is the
largest SDNode; I don't fully understand the SDNode allocation,
but it is sensitive to the largest node size, so increasing
that must be bad. This is the alternative.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55457 91177308-0d34-0410-b5e6-96231b3b80d8
use raw_ostream instead of std::ostream. Among other goodness,
this speeds up llvm-dis of kc++ with a release build from 0.85s
to 0.49s (88% faster).
Other interesting changes:
1) This makes Value::print be non-virtual.
2) AP[S]Int and ConstantRange can no longer print to ostream directly,
use raw_ostream instead.
3) This fixes a bug in raw_os_ostream where it didn't flush itself
when destroyed.
4) This adds a new SDNode::print method, instead of only allowing "dump".
A lot of APIs have both std::ostream and raw_ostream versions, it would
be useful to go through and systematically anihilate the std::ostream
versions.
This passes dejagnu, but there may be minor fallout, plz let me know if
so and I'll fix it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55263 91177308-0d34-0410-b5e6-96231b3b80d8
alignment and volatility information, such as loads and
stores, to reduce the number of integer values added to
the FoldingSetNodeID.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55058 91177308-0d34-0410-b5e6-96231b3b80d8
which is represented in codegen as an 'and' operation. This matches them
with movz instructions, instead of leaving them to be matched by and
instructions with an immediate field.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54147 91177308-0d34-0410-b5e6-96231b3b80d8
a new ilist_node class, and remove them. Unlike alist_node,
ilist_node doesn't attempt to manage storage itself, so it avoids
the associated problems, including being opaque in gdb.
Adjust the Recycler class so that it doesn't depend on alist_node.
Also, change it to use explicit Size and Align parameters, allowing
it to work when the largest-sized node doesn't have the greatest
alignment requirement.
Change MachineInstr's MachineMemOperand list from a pool-backed
alist to a std::list for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54146 91177308-0d34-0410-b5e6-96231b3b80d8
parallel its analogue, Value::value_use_iterator. The operator* method
now returns the user, rather than the use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54127 91177308-0d34-0410-b5e6-96231b3b80d8
replacement of multiple values. This is slightly more efficient
than doing multiple ReplaceAllUsesOfValueWith calls, and theoretically
could be optimized even further. However, an important property of this
new function is that it handles the case where the source value set and
destination value set overlap. This makes it feasible for isel to use
SelectNodeTo in many very common cases, which is advantageous because
SelectNodeTo avoids a temporary node and it doesn't require CSEMap
updates for users of values that don't change position.
Revamp MorphNodeTo, which is what does all the work of SelectNodeTo, to
handle operand lists more efficiently, and to correctly handle a number
of corner cases to which its new wider use exposes it.
This commit also includes a change to the encoding of post-isel opcodes
in SDNodes; now instead of being sandwiched between the target-independent
pre-isel opcodes and the target-dependent pre-isel opcodes, post-isel
opcodes are now represented as negative values. This makes it possible
to test if an opcode is pre-isel or post-isel without having to know
the size of the current target's post-isel instruction set.
These changes speed up llc overall by 3% and reduce memory usage by 10%
on the InstructionCombining.cpp testcase with -fast and -regalloc=local.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53728 91177308-0d34-0410-b5e6-96231b3b80d8
in Value, to make use of some otherwise unused space. Use this
field to shrink LoadSDNode and StoreSDNode by moving the
addressing mode and ext/trunc fields there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53422 91177308-0d34-0410-b5e6-96231b3b80d8
makes their special-case checks of use_size() less beneficial,
so remove them. This eliminates all but one use of use_size(),
which is in AssignTopologicalOrder, which uses it only once for
each node, and so can reasonably afford to recompute it, as
this allows the UsesSize field of SDNode to be removed
altogether.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53377 91177308-0d34-0410-b5e6-96231b3b80d8
class, and store IsVolatile and Alignment in a more compact form.
This makes AtomicSDNode slightly larger, but it shrinks LoadSDNode
and StoreSDNode, which are much more common and are the largest of
the SDNode subclasses. Also, this lets the isVolatile() and
getAlignment() accessors be non-virtual.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53361 91177308-0d34-0410-b5e6-96231b3b80d8
and reused across SelectionDAGs.
This drastically reduces the number of calls to malloc/free made during
instruction selection, and improves memory locality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53211 91177308-0d34-0410-b5e6-96231b3b80d8
properly track dead nodes that are on the original SDNode's operand
list but not the new one, and have no other uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53201 91177308-0d34-0410-b5e6-96231b3b80d8
simple const SDOperand*, which is what's usually needed.
For AddNodeIDOperands, which is small, just duplicate the function to
accept an SDUse*.
For SelectionDAG::getNode - Add an overload that accepts SDUse* that
copies the operands into a temporary SDOperand array, but also has
special-case checks for 0 through 3 operands to avoid the copy in
the common cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53183 91177308-0d34-0410-b5e6-96231b3b80d8
the need for a flavor operand, and add a new SDNode subclass,
LabelSDNode, for use with them to eliminate the need for a label id
operand.
Change instruction selection to let these label nodes through
unmodified instead of creating copies of them. Teach the MachineInstr
emitter how to emit a MachineInstr directly from an ISD label node.
This avoids the need for allocating SDNodes for the label id and
flavor value, as well as SDNodes for each of the post-isel label,
label id, and label flavor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52943 91177308-0d34-0410-b5e6-96231b3b80d8
purpose, and give it a custom SDNode subclass so that it doesn't
need to have line number, column number, filename string, and
directory string, all existing as individual SDNodes to be the
operands.
This was the only user of ISD::STRING, StringSDNode, etc., so
remove those and some associated code.
This makes stop-points considerably easier to read in
-view-legalize-dags output, and reduces overhead (creating new
nodes and copying std::strings into them) on code containing
debugging information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52924 91177308-0d34-0410-b5e6-96231b3b80d8
For this it is convenient to permit floats to
be used with EXTRACT_ELEMENT, so I tweaked
things to allow that. I also added libcalls
for ppcf128 to i32 forms of FP_TO_XINT, since
they exist in libgcc and this case can certainly
occur (and does occur in the testsuite) - before
the i64 libcall was being used. Also, the
XINT_TO_FP result seemed to be wrong when
the argument is an i128: the wrong fudge
factor was added (the i32 and i64 cases were
handled directly, but the i128 code fell
through to some generic softening code which
seemed to think it was i64 to f32!). So I
fixed it by adding a fudge factor that I
found in my breakfast cereal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52739 91177308-0d34-0410-b5e6-96231b3b80d8
Added abstract class MemSDNode for any Node that have an associated MemOperand
Changed atomic.lcs => atomic.cmp.swap, atomic.las => atomic.load.add, and
atomic.lss => atomic.load.sub
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52706 91177308-0d34-0410-b5e6-96231b3b80d8
and better control the abstraction. Rename the type
to MVT. To update out-of-tree patches, the main
thing to do is to rename MVT::ValueType to MVT, and
rewrite expressions like MVT::getSizeInBits(VT) in
the form VT.getSizeInBits(). Use VT.getSimpleVT()
to extract a MVT::SimpleValueType for use in switch
statements (you will get an assert failure if VT is
an extended value type - these shouldn't exist after
type legalization).
This results in a small speedup of codegen and no
new testsuite failures (x86-64 linux).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52044 91177308-0d34-0410-b5e6-96231b3b80d8
Rename SDOperandImpl back to SDOperand.
Introduce the SDUse class that represents a use of the SDNode referred by
an SDOperand. Now it is more similar to Use/Value classes.
Patch is approved by Dan Gohman.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49795 91177308-0d34-0410-b5e6-96231b3b80d8
on any current target and aren't optimized in DAGCombiner. Instead
of using intermediate nodes, expand the operations, choosing between
simple loads/stores, target-specific code, and library calls,
immediately.
Previously, the code to emit optimized code for these operations
was only used at initial SelectionDAG construction time; now it is
used at all times. This fixes some cases where rep;movs was being
used for small copies where simple loads/stores would be better.
This also cleans up code that checks for alignments less than 4;
let the targets make that decision instead of doing it in
target-independent code. This allows x86 to use rep;movs in
low-alignment cases.
Also, this fixes a bug that resulted in the use of rep;stos for
memsets of 0 with non-constant memory size when the alignment was
at least 4. It's better to use the library in this case, which
can be significantly faster when the size is large.
This also preserves more SourceValue information when memory
intrinsics are lowered into simple loads/stores.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49572 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM Value/Use does and MachineRegisterInfo/MachineOperand does.
This allows constant time for all uses list maintenance operations.
The idea was suggested by Chris. Reviewed by Evan and Dan.
Patch is tested and approved by Dan.
On normal use-cases compilation speed is not affected. On very big basic
blocks there are compilation speedups in the range of 15-20% or even better.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48822 91177308-0d34-0410-b5e6-96231b3b80d8
flags. This is needed by the new legalize types
infrastructure which wants to expand the 64 bit
constants previously used to hold the flags on
32 bit machines. There are two functional changes:
(1) in LowerArguments, if a parameter has the zext
attribute set then that is marked in the flags;
before it was being ignored; (2) PPC had some bogus
code for handling two word arguments when using the
ELF 32 ABI, which was hard to convert because of
the bogusness. As suggested by the original author
(Nicolas Geoffray), I've disabled it for the moment.
Tested with "make check" and the Ada ACATS testsuite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48640 91177308-0d34-0410-b5e6-96231b3b80d8
getCopyToParts problem was noticed by the new
LegalizeTypes infrastructure. In order to avoid
this kind of thing in the future I've added a
check that EXTRACT_ELEMENT is only used with
integers. Once LegalizeTypes is up and running
most likely BUILD_PAIR and EXTRACT_ELEMENT can
be removed, in favour of using apints instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48294 91177308-0d34-0410-b5e6-96231b3b80d8
Change insert/extract subreg instructions to be able to be used in TableGen patterns.
Use the above features to reimplement an x86-64 pseudo instruction as a pattern.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48130 91177308-0d34-0410-b5e6-96231b3b80d8
field to 32 bits, thus enabling correct handling of ByVal
structs bigger than 0x1ffff. Abstract interface a bit.
Fixes gcc.c-torture/execute/pr23135.c and
gcc.c-torture/execute/pr28982b.c in gcc testsuite (were ICE'ing
on ppc32, quietly producing wrong code on x86-32.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48122 91177308-0d34-0410-b5e6-96231b3b80d8
- X86 now normalize SCALAR_TO_VECTOR to (BIT_CONVERT (v4i32 SCALAR_TO_VECTOR)). Get rid of X86ISD::S2VEC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47290 91177308-0d34-0410-b5e6-96231b3b80d8
initializer problem, a minor tweak to the way the
DAGISelEmitter finds load/store nodes, and a renaming of the
new PseudoSourceValue objects.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46827 91177308-0d34-0410-b5e6-96231b3b80d8
Added ISD::DECLARE node type to represent llvm.dbg.declare intrinsic. Now the intrinsic calls are lowered into a SDNode and lives on through out the codegen passes.
For now, since all the debugging information recording is done at isel time, when a ISD::DECLARE node is selected, it has the side effect of also recording the variable. This is a short term solution that should be fixed in time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46659 91177308-0d34-0410-b5e6-96231b3b80d8
in the backend. Introduce a new SDNode type, MemOperandSDNode, for
holding a MemOperand in the SelectionDAG IR, and add a MemOperand
list to MachineInstr, and code to manage them. Remove the offset
field from SrcValueSDNode; uses of SrcValueSDNode that were using
it are all all using MemOperandSDNode now.
Also, begin updating some getLoad and getStore calls to use the
PseudoSourceValue objects.
Most of this was written by Florian Brander, some
reorganization and updating to TOT by me.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46585 91177308-0d34-0410-b5e6-96231b3b80d8
and StoreSDNode into their common base class LSBaseSDNode. Member
functions getLoadedVT and getStoredVT are replaced with the common
getMemoryVT to simplify code that will handle both loads and stores.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46538 91177308-0d34-0410-b5e6-96231b3b80d8
and switch various codegen pieces and the X86 backend over
to using it.
* Add some comments to SelectionDAGNodes.h
* Introduce a second argument to FP_ROUND, which indicates
whether the FP_ROUND changes the value of its input. If
not it is safe to xform things like fp_extend(fp_round(x)) -> x.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46125 91177308-0d34-0410-b5e6-96231b3b80d8
- Cleaned up custom load/store logic, common code is now shared [see note
below], cleaned up address modes
- More test cases: various intrinsics, structure element access (load/store
test), updated target data strings, indirect function calls.
Note: This patch contains a refactoring of the LoadSDNode and StoreSDNode
structures: they now share a common base class, LSBaseSDNode, that
provides an interface to their common functionality. There is some hackery
to access the proper operand depending on the derived class; otherwise,
to do a proper job would require finding and rearranging the SDOperands
sent to StoreSDNode's constructor. The current refactor errs on the
side of being conservatively and backwardly compatible while providing
functionality that reduces redundant code for targets where loads and
stores are custom-lowered.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45851 91177308-0d34-0410-b5e6-96231b3b80d8
To do this it is necessary to add a "always inline" argument to the
memcpy node. For completeness I have also added this node to memmove
and memset. I have also added getMem* functions, because the extra
argument makes it cumbersome to use getNode and because I get confused
by it :-)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43172 91177308-0d34-0410-b5e6-96231b3b80d8
Add a new DenseMapInfo::isEqual method to allow clients to redefine
the equality predicate used when probing the hash table.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42042 91177308-0d34-0410-b5e6-96231b3b80d8
Implement some constant folding in SelectionDAG and
DAGCombiner using APFloat. Remove double versions
of constructor and getValue from ConstantFPSDNode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@41664 91177308-0d34-0410-b5e6-96231b3b80d8
Add APFloat interfaces to ConstantFP, SelectionDAG.
Fix integer bit in double->APFloat conversion.
Convert LegalizeDAG to use APFloat interface in
ConstantFPSDNode uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@41587 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fills the last necessary bits to enable exceptions
handling in LLVM. Currently only on x86-32/linux.
In fact, this patch adds necessary intrinsics (and their lowering) which
represent really weird target-specific gcc builtins used inside unwinder.
After corresponding llvm-gcc patch will land (easy) exceptions should be
more or less workable. However, exceptions handling support should not be
thought as 'finished': I expect many small and not so small glitches
everywhere.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@39855 91177308-0d34-0410-b5e6-96231b3b80d8
illegal value type will be transformed to, for code that needs the
register type after all transformations instead of just after the first
transformation.
Factor out the code that uses this information to do copy-from-regs and
copy-to-regs for various purposes into separate functions so that they
are done consistently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37781 91177308-0d34-0410-b5e6-96231b3b80d8
extended vector types. Remove the special SDNode opcodes used for pre-legalize
vector operations, and the special MVT::Vector type used with them. Adjust
lowering and legalize to work with the normal SDNode kinds instead, and to
use the normal MVT functions to work with vector types instead of using the
two special operands that the pre-legalize nodes held.
This allows pre-legalize and post-legalize DAGs, and the code that operates
on them, to be more consistent. Pre-legalize vector operators can be handled
more consistently with scalar operators. And, -view-dag-combine1-dags and
-view-legalize-dags now look prettier for vector code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37719 91177308-0d34-0410-b5e6-96231b3b80d8
VCONCAT_VECTORS. Use these for CopyToReg and CopyFromReg legalizing in
the case that the full register is to be split into subvectors instead
of scalars. This replaces uses of VBIT_CONVERT to present values as
vector-of-vector types in order to make whole subvectors accessible via
BUILD_VECTOR and EXTRACT_VECTOR_ELT.
This is in preparation for adding extended ValueType values, where
having vector-of-vector types is undesirable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37569 91177308-0d34-0410-b5e6-96231b3b80d8
Also, fixed static case in presence of eax livin. This fixes PR331
PS: Why don't we still have push/pop instructions? :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36195 91177308-0d34-0410-b5e6-96231b3b80d8
Intrinsic functions might need to be generated (if they are overloaded) so
returning a const char* is no longer possible. Change getOperationName to
return a std::string instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35543 91177308-0d34-0410-b5e6-96231b3b80d8
