As with the stores, these instructions can trap when the condition is false,
so they are only used for things like (cond ? x : *ptr).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187112 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions are allowed to trap even if the condition is false,
so for now they are only used for "*ptr = (cond ? x : *ptr)"-style
constructs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187111 91177308-0d34-0410-b5e6-96231b3b80d8
Enable parsing all 32 floating point control registers $0-31 and stop trying to
parse floating point condition code register $fcc0. Also, return ParseFail if
the operand being parsed is not in the expected format.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186861 91177308-0d34-0410-b5e6-96231b3b80d8
instructions. With this patch:
1. ldr.n is recognized as mnemonic for the short encoding
2. ldr.w is recognized as menmonic for the long encoding
3. ldr will map to either short or long encodings depending on the size of the offset
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186831 91177308-0d34-0410-b5e6-96231b3b80d8
The insn definitions themselves crept into r186689, sorry.
This should be the last of the distinct-ops instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186690 91177308-0d34-0410-b5e6-96231b3b80d8
Follows the same lines as r186686, but much more limited, since we only
use ADD LOGICAL for multi-i64 additions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186689 91177308-0d34-0410-b5e6-96231b3b80d8
The atomic tests assume the two-operand forms, so I've restricted them to z10.
Running and-01.ll, or-01.ll and xor-01.ll for z196 as well as z10 shows why
using convertToThreeAddress() is better than exposing the three-operand forms
first and then converting back to two operands where possible (which is what
I'd originally tried). Using the three-operand form first stops us from
taking advantage of NG, OG and XG for spills.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186683 91177308-0d34-0410-b5e6-96231b3b80d8
This first step just adds definitions for SLLK, SRLK and SRAK.
The next patch will actually make use of them during codegen.
insn-bad.s tests that some form of error is reported when using these
instructions on z10. More work is needed to get the "instruction requires:
distinct-ops" that we'd ideally like, so I've stubbed that part out for now.
I'll come back and make it mandatory once the necessary changes are in.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186680 91177308-0d34-0410-b5e6-96231b3b80d8
Somehow forgot to git rm these two files. I believe I left the remaining
invalid* tests intentionally, though whether my reasons were sound is a
different matter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186663 91177308-0d34-0410-b5e6-96231b3b80d8
The tests were checking for barriers which the ARM ARM says they must execute
as a full system DMB/DSB, rather than that they're UNDEFINED and LLVM does in
fact represent them.
The tests happened to be passing because they were using a non-versioned ARM
triple which didn't have *any* DMB/DSB instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186662 91177308-0d34-0410-b5e6-96231b3b80d8
This allows "llvm-mc -disassemble" to accept two new features:
+ Using comma as a byte separator
+ Grouping bytes with '[' and ']' pairs.
The behaviour outside a [...] group is unchanged. But within the group once
llvm-mc encounters a true error, it stops rather than trying to resynchronise
the stream at the next byte. This is more useful for disassembly tests, where
we have an almost-instruction in mind and don't care what the misaligned
interpretation would be. Particularly if it means llvm-mc won't actually see
the next intended almost-instruction.
As a side effect, this means llvm-mc can disassemble its own -show-encoding
output if copy-pasted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186661 91177308-0d34-0410-b5e6-96231b3b80d8
This adds an instruction alias to make the assembler recognize the alternate literal form: pli [PC, #+/-<imm>]
See A8.8.129 in the ARM ARM (DDI 0406C.b).
Fixes <rdar://problem/14403733>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186459 91177308-0d34-0410-b5e6-96231b3b80d8
RISBG has three 8-bit operands (I3, I4 and I5). I'd originally
restricted all three to 6 bits, since that's the only range we intended
to use at the time. However, the top bit of I4 acts as a "zero" flag for
RISBG, while the top bit of I3 acts as a "test" flag for RNSBG & co.
This patch therefore allows them to have the full 8-bit range.
I've left the fifth operand as a 6-bit value for now since the
upper 2 bits have no defined meaning.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186070 91177308-0d34-0410-b5e6-96231b3b80d8
Patch from Игорь Пашев (I do hope we support utf-8 commit messages; I
also hope he'll forgive me for transliterating it as Igor Pashev in
case things go horribly wrong).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186034 91177308-0d34-0410-b5e6-96231b3b80d8
In the commit message to r185476 I wrote:
>The PowerPC-specific modifiers VK_PPC_TLSGD and VK_PPC_TLSLD
>correspond exactly to the generic modifiers VK_TLSGD and VK_TLSLD.
>This causes some confusion with the asm parser, since VK_PPC_TLSGD
>is output as @tlsgd, which is then read back in as VK_TLSGD.
>
>To avoid this confusion, this patch removes the PowerPC-specific
>modifiers and uses the generic modifiers throughout. (The only
>drawback is that the generic modifiers are printed in upper case
>while the usual convention on PowerPC is to use lower-case modifiers.
>But this is just a cosmetic issue.)
This was unfortunately incorrect, there is is fact another,
serious drawback to using the default VK_TLSLD/VK_TLSGD
variant kinds: using these causes ELFObjectWriter::RelocNeedsGOT
to return true, which in turn causes the ELFObjectWriter to emit
an undefined reference to _GLOBAL_OFFSET_TABLE_.
This is a problem on powerpc64, because it uses the TOC instead
of the GOT, and the linker does not provide _GLOBAL_OFFSET_TABLE_,
so the symbol remains undefined. This means shared libraries
using TLS built with the integrated assembler are currently
broken.
While the whole RelocNeedsGOT / _GLOBAL_OFFSET_TABLE_ situation
probably ought to be properly fixed at some point, for now I'm
simply reverting the r185476 commit. Now this in turn exposes
the breakage of handling @tlsgd/@tlsld in the asm parser that
this check-in was originally intended to fix.
To avoid this regression, I'm also adding a different fix for
this problem: while common code now parses @tlsgd as VK_TLSGD,
a special hack in the asm parser translates this code to the
platform-specific VK_PPC_TLSGD that the back-end now expects.
While this is not really pretty, it's self-contained and
shouldn't hurt anything else for now. One the underlying
problem is fixed, this hack can be reverted again.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185945 91177308-0d34-0410-b5e6-96231b3b80d8
The PowerPC assembler is supposed to provide a directive .machine
that allows switching the supported CPU instruction set on the fly.
Since we do not yet check CPU feature sets at all and always accept
any available instruction, this is not really useful at this point.
However, it makes sense to accept (and ignore) ".machine any" to
avoid spuriously rejecting existing assembler files that use this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185924 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the .llong PowerPC-specifc assembler directive.
In doing so, I notices that .word is currently incorrect: it is
supposed to define a 2-byte data element, not a 4-byte one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185911 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the old-style time base instructions;
while new programs are supposed to use mfspr, the mftb instructions
are still supported and in use by existing assembler files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185829 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the basic mnemoics (with the L operand) for the
fixed-point compare instructions. These are defined as aliases for the
already existing CMPW/CMPD patterns, depending on the value of L.
This requires use of InstAlias patterns with immediate literal operands.
To make this work, we need two further changes:
- define a RegisterPrefix, because otherwise literals 0 and 1 would
be parsed as literal register names
- provide a PPCAsmParser::validateTargetOperandClass routine to
recognize immediate literals (like ARM does)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185826 91177308-0d34-0410-b5e6-96231b3b80d8
