Previously, subtarget features were a bitfield with the underlying type being uint64_t.
Since several targets (X86 and ARM, in particular) have hit or were very close to hitting this bound, switching the features to use a bitset.
No functional change.
The first time this was committed (r229831), it caused several buildbot failures.
At least some of the ARM ones were due to gcc/binutils issues, and should now be fixed.
Differential Revision: http://reviews.llvm.org/D8542
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233055 91177308-0d34-0410-b5e6-96231b3b80d8
The pass used to be enabled by default with CodeGenOpt::Less (-O1).
This is too aggressive, considering the pass indiscriminately merges
all globals together.
Currently, performance doesn't always improve, and, on code that uses
few globals (e.g., the odd file- or function- static), more often than
not is degraded by the optimization. Lengthy discussion can be found
on llvmdev (AArch64-focused; ARM has similar problems):
http://lists.cs.uiuc.edu/pipermail/llvmdev/2015-February/082800.html
Also, it makes tooling and debuggers less useful when dealing with
globals and data sections.
GlobalMerge needs to better identify those cases that benefit, and this
will be done separately. In the meantime, move the pass to run with
-O3 rather than -O1, on both ARM and AArch64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233024 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
But still handle them the same way since I don't know how they differ on
this target.
Clang also has code for 'Ump', 'Utf', 'Usa', and 'Ush' but calls
llvm_unreachable() on this code path so they are not converted to a
constraint id at the moment.
No functional change intended.
Reviewers: t.p.northover
Subscribers: aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D8177
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232941 91177308-0d34-0410-b5e6-96231b3b80d8
of this add a test that shows we can generate code for functions
that specifically enable a subtarget feature.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232884 91177308-0d34-0410-b5e6-96231b3b80d8
The code this patch removes was there to make sure the text sections went
before the dwarf sections. That is necessary because MachO uses offsets
relative to the start of the file, so adding a section can change relaxations.
The dwarf sections were being printed at the start just to produce symbols
pointing at the start of those sections.
The underlying issue was fixed in r231898. The dwarf sections are now printed
when they are about to be used, which is after we printed the text sections.
To make sure we don't regress, the patch makes the MachO streamer assert
if CodeGen puts anything unexpected after the DWARF sections.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232842 91177308-0d34-0410-b5e6-96231b3b80d8
LocalStackSlotPass assumes that isFrameOffsetLegal doesn't change its
answer when the base register changes. Unfortunately this isn't true
in thumb1, where SP-based loads allow a larger offset than
non-SP-based loads, and this causes the base register reuse code to
generate instructions that are unencodable, causing an assertion
failure.
Solve this by adding a BaseReg parameter to isFrameOffsetLegal, which
ARMBaseRegisterInfo can then make use of to give the correct answer.
Differential Revision: http://reviews.llvm.org/D8419
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232825 91177308-0d34-0410-b5e6-96231b3b80d8
There are two main advantages to doing this
* Targets that only need to handle one of the formats specially don't have
to worry about the others. For example, x86 now only registers a
constructor for the COFF streamer.
* Changes to the arguments passed to one format constructor will not impact
the other formats.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232699 91177308-0d34-0410-b5e6-96231b3b80d8
as we don't necessarily need to do this yet - though we could move
the base class to the TargetMachine as it isn't subtarget dependent.
This reverts commit r232103.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232665 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Building FP16 constant vectors caused the FP16 data to be bitcast to i64. This patch creates a BITCAST node with the correct value, and adds a test to verify correct handling.
Reviewers: mcrosier
Reviewed By: mcrosier
Subscribers: mcrosier, jmolloy, ab, srhines, llvm-commits, rengolin, aemerson
Differential Revision: http://reviews.llvm.org/D8369
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232562 91177308-0d34-0410-b5e6-96231b3b80d8
Before this patch code wanting to create temporary labels for a given entity
(function, cu, exception range, etc) had to keep its own counter to have stable
symbol names.
createTempSymbol would still add a suffix to make sure a new symbol was always
returned, but it kept a single counter. Because of that, if we were to use
just createTempSymbol("cu_begin"), the label could change from cu_begin42 to
cu_begin43 because some other code started using temporary labels.
Simplify this by just keeping one counter per prefix and removing the various
specialized counters.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232535 91177308-0d34-0410-b5e6-96231b3b80d8
Optimize concat_vectors of truncated vectors, where the intermediate
type is illegal, to avoid said illegality, e.g.,
(v4i16 (concat_vectors (v2i16 (truncate (v2i64))),
(v2i16 (truncate (v2i64)))))
->
(v4i16 (truncate (v4i32 (concat_vectors (v2i32 (truncate (v2i64))),
(v2i32 (truncate (v2i64)))))))
This isn't really target-specific, and, as such, would best go in the
DAGCombiner. However, ISD::TRUNCATE legality isn't keyed on both input
and result type, so we might generate worse code when we don't know
better. On AArch64 we know it's fine for v2i64->v4i16 and v4i32->v8i8.
rdar://20022387
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232459 91177308-0d34-0410-b5e6-96231b3b80d8
This covers essentially all of llvm's headers and libs. One or two weird
cases I wasn't sure were worth/appropriate to fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232394 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is instead of doing this in target independent code and is the last
non-functional change before targets begin to distinguish between
different memory constraints when selecting code for the ISD::INLINEASM
node.
Next, each target will individually move away from the idea that all
memory constraints behave like 'm'.
Subscribers: jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D8173
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232373 91177308-0d34-0410-b5e6-96231b3b80d8
The operand flag word for ISD::INLINEASM nodes now contains a 15-bit
memory constraint ID when the operand kind is Kind_Mem. This constraint
ID is a numeric equivalent to the constraint code string and is converted
with a target specific hook in TargetLowering.
This patch maps all memory constraints to InlineAsm::Constraint_m so there
is no functional change at this point. It just proves that using these
previously unused bits in the encoding of the flag word doesn't break
anything.
The next patch will make each target preserve the current mapping of
everything to Constraint_m for itself while changing the target independent
implementation of the hook to return Constraint_Unknown appropriately. Each
target will then be adapted in separate patches to use appropriate
Constraint_* values.
PR22883 was caused the matching operands copying the whole of the operand flags
for the matched operand. This included the constraint id which needed to be
replaced with the operand number. This has been fixed with a conversion
function. Following on from this, matching operands also used the operand
number as the constraint id. This has been fixed by looking up the matched
operand and taking it from there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232165 91177308-0d34-0410-b5e6-96231b3b80d8
implementation. This requires a bit of scaffolding and a few fixups
that'll go away once all of the ports have been migrated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232103 91177308-0d34-0410-b5e6-96231b3b80d8
This (r232027) has caused PR22883; so it seems those bits might be used by
something else after all. Reverting until we can figure out what else to do.
Original commit message:
The operand flag word for ISD::INLINEASM nodes now contains a 15-bit
memory constraint ID when the operand kind is Kind_Mem. This constraint
ID is a numeric equivalent to the constraint code string and is converted
with a target specific hook in TargetLowering.
This patch maps all memory constraints to InlineAsm::Constraint_m so there
is no functional change at this point. It just proves that using these
previously unused bits in the encoding of the flag word doesn't break anything.
The next patch will make each target preserve the current mapping of
everything to Constraint_m for itself while changing the target independent
implementation of the hook to return Constraint_Unknown appropriately. Each
target will then be adapted in separate patches to use appropriate Constraint_*
values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232093 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The operand flag word for ISD::INLINEASM nodes now contains a 15-bit
memory constraint ID when the operand kind is Kind_Mem. This constraint
ID is a numeric equivalent to the constraint code string and is converted
with a target specific hook in TargetLowering.
This patch maps all memory constraints to InlineAsm::Constraint_m so there
is no functional change at this point. It just proves that using these
previously unused bits in the encoding of the flag word doesn't break anything.
The next patch will make each target preserve the current mapping of
everything to Constraint_m for itself while changing the target independent
implementation of the hook to return Constraint_Unknown appropriately. Each
target will then be adapted in separate patches to use appropriate Constraint_*
values.
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D8171
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232027 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
I don't know why every singled backend had to redeclare its own DataLayout.
There was a virtual getDataLayout() on the common base TargetMachine, the
default implementation returned nullptr. It was not clear from this that
we could assume at call site that a DataLayout will be available with
each Target.
Now getDataLayout() is no longer virtual and return a pointer to the
DataLayout member of the common base TargetMachine. I plan to turn it into
a reference in a future patch.
The only backend that didn't have a DataLayout previsouly was the CPPBackend.
It now initializes the default DataLayout. This commit is NFC for all the
other backends.
Test Plan: clang+llvm ninja check-all
Reviewers: echristo
Subscribers: jfb, jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D8243
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231987 91177308-0d34-0410-b5e6-96231b3b80d8
time. The target independent code was passing in one all the
time and targets weren't checking validity before using. Update
a few calls to pass in a MachineFunction where necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231970 91177308-0d34-0410-b5e6-96231b3b80d8
update all ports accordingly. Required a couple of small rewrites
in handling subtarget features during creation in PPC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231861 91177308-0d34-0410-b5e6-96231b3b80d8
This adds new node types for each intrinsic.
For instance, for addv, we have AArch64ISD::UADDV, such that:
(v4i32 (uaddv ...))
is the same as
(v4i32 (scalar_to_vector (i32 (int_aarch64_neon_uaddv ...))))
that is,
(v4i32 (INSERT_SUBREG (v4i32 (IMPLICIT_DEF)),
(i32 (int_aarch64_neon_uaddv ...)), ssub)
In a combine, we transform all such across-vector-lanes intrinsics to:
(i32 (extract_vector_elt (uaddv ...), 0))
This has one big advantage: by making the extract_element explicit, we
enable the existing patterns for lane-aware instructions to fire.
This lets us avoid needlessly going through the GPRs. Consider:
uint32x4_t test_mul(uint32x4_t a, uint32x4_t b) {
return vmulq_n_u32(a, vaddvq_u32(b));
}
We now generate:
addv.4s s1, v1
mul.4s v0, v0, v1[0]
instead of the previous:
addv.4s s1, v1
fmov w8, s1
dup.4s v1, w8
mul.4s v0, v1, v0
rdar://20044838
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231840 91177308-0d34-0410-b5e6-96231b3b80d8
Most are redundant, and they never seem to fire.
The V128 integer patterns already exist in the INS multiclass.
The duplicates only fire when the vector index type isn't i64,
because they accept "imm" instead of an explicit "i64", as the
instruction definition patterns do.
TLI::getVectorIdxTy is i64 on AArch64, so this should never happen.
Also, one of them had a typo: for i64, INSvi32lane was used.
I noticed because I mistakenly used an explicit i32 as the idx type,
and got ins.s for an i64 vector_insert.
The V64 patterns also don't seem to ever fire, as V64 vector
extract/insert are legalized to V128.
The equivalent float patterns are unique and useful, so keep them.
No functional change intended; none exhibited on the LIT and LNT tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231838 91177308-0d34-0410-b5e6-96231b3b80d8
For inner one of nested loops, it is more likely to be a hot loop,
and the runtime check can be promoted out from patch 0001, so the
overhead is less, we can try a doubled threshold to unroll more loops.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231632 91177308-0d34-0410-b5e6-96231b3b80d8
In theory this allows the compiler to skip materializing the array on
the stack. In practice clang often fails to do that, but that's a
different story. NFC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231571 91177308-0d34-0410-b5e6-96231b3b80d8
Teach the load store optimizer how to sign extend a result of a load pair when
it helps creating more pairs.
The rational is that loads are more expensive than sign extensions, so if we
gather some in one instruction this is better!
<rdar://problem/20072968>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231527 91177308-0d34-0410-b5e6-96231b3b80d8
Add MachO 32-bit (i.e. arm and x86) support for replacing global GOT equivalent
symbol accesses. Unlike 64-bit targets, there's no GOTPCREL relocation, and
access through a non_lazy_symbol_pointers section is used instead.
-- before
_extgotequiv:
.long _extfoo
_delta:
.long _extgotequiv-_delta
-- after
_delta:
.long L_extfoo$non_lazy_ptr-_delta
.section __IMPORT,__pointers,non_lazy_symbol_pointers
L_extfoo$non_lazy_ptr:
.indirect_symbol _extfoo
.long 0
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231475 91177308-0d34-0410-b5e6-96231b3b80d8
Follow up r230264 and add ARM64 support for replacing global GOT
equivalent symbol accesses by references to the GOT entry for the final
symbol instead, example:
-- before
.globl _foo
_foo:
.long 42
.globl _gotequivalent
_gotequivalent:
.quad _foo
.globl _delta
_delta:
.long _gotequivalent-_delta
-- after
.globl _foo
_foo:
.long 42
.globl _delta
Ltmp3:
.long _foo@GOT-Ltmp3
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231474 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In PNaCl, most atomic instructions have their own @llvm.nacl.atomic.* function, each one, with a few exceptions, represents a consistent behaviour across all NaCl-supported targets. Unfortunately, the atomic RMW operations nand, [u]min, and [u]max aren't directly represented by any such @llvm.nacl.atomic.* function. This patch refines shouldExpandAtomicRMWInIR in TargetLowering so that a future `Le32TargetLowering` class can selectively inform the caller how the target desires the atomic RMW instruction to be expanded (ie via load-linked/store-conditional for ARM/AArch64, via cmpxchg for X86/others?, or not at all for Mips) if at all.
This does not represent a behavioural change and as such no tests were added.
Patch by: Richard Diamond.
Reviewers: jfb
Reviewed By: jfb
Subscribers: jfb, aemerson, t.p.northover, llvm-commits
Differential Revision: http://reviews.llvm.org/D7713
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231250 91177308-0d34-0410-b5e6-96231b3b80d8
As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers
ld.bfd and ld.gold currently only support a subset of the whole range of AArch64
ELF TLS relocations. Furthermore, they assume that some of the code sequences to
access thread-local variables are produced in a very specific sequence.
When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize
the instructions.
Even if that wouldn't be the case, it's good to produce the exact sequence,
as that ensures that linkers can perform optimizing relaxations.
This patch:
* implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang
would grow an -mtls-size option to allow support for both, but that's not part of this patch.
* by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold
linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation)
is added to enable generation of local dynamic code sequence, but is off by default.
* makes sure that the exact expected code sequence for local dynamic and general dynamic
accesses is produced, by making use of a new pseudo instruction. The patch also removes
two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo
SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231227 91177308-0d34-0410-b5e6-96231b3b80d8
Accidentally committed a few more of these cleanup changes than
intended. Still breaking these out & tidying them up.
This reverts commit r231135.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231136 91177308-0d34-0410-b5e6-96231b3b80d8
There doesn't seem to be any need to assert that iterator assignment is
between iterators over the same node - if you want to reuse an iterator
variable to iterate another node, that's perfectly acceptable. Just
don't mix comparisons between iterators into disjoint sequences, as
usual.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231135 91177308-0d34-0410-b5e6-96231b3b80d8
uses of TM->getSubtargetImpl and propagate to all calls.
This could be a debugging regression in places where we had a
TargetMachine and/or MachineFunction but don't have it as part
of the MachineInstr. Fixing this would require passing a
MachineFunction/Function down through the print operator, but
none of the existing uses in tree seem to do this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230710 91177308-0d34-0410-b5e6-96231b3b80d8
a lookup, pass that in rather than use a naked call to getSubtargetImpl.
This involved passing down and around either a TargetMachine or
TargetRegisterInfo. Update all callers/definitions around the targets
and SelectionDAG.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230699 91177308-0d34-0410-b5e6-96231b3b80d8
This required plumbing a TargetRegisterInfo through computeRegisterProperties
and into findRepresentativeClass which uses it for register class
iteration. This required passing a subtarget into a few target specific
initializations of TargetLowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230583 91177308-0d34-0410-b5e6-96231b3b80d8
The reason why these large shift sizes happen is because OpaqueConstants
currently inhibit alot of DAG combining, but that has to be addressed in
another commit (like the proposal in D6946).
Differential Revision: http://reviews.llvm.org/D6940
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230355 91177308-0d34-0410-b5e6-96231b3b80d8
It was previously using the subtarget to get values for the global
offset without actually checking each function as it was generating
code. Go ahead and solidify the current behavior and make the
existing FIXMEs more prominent.
As a note the ARM backend previously had a thumb1 and non-thumb1
set of defaults. Only the former was tested so I've changed the
behavior to only use that for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230245 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds the isProfitableToHoist API. For AArch64, we want to prevent a
fmul from being hoisted in cases where it is more profitable to form a
fmsub/fmadd.
Phabricator Review: http://reviews.llvm.org/D7299
Patch by Lawrence Hu <lawrence@codeaurora.org>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230241 91177308-0d34-0410-b5e6-96231b3b80d8
Everyone except R600 was manually passing the length of a static array
at each callsite, calculated in a variety of interesting ways. Far
easier to let ArrayRef handle that.
There should be no functional change, but out of tree targets may have
to tweak their calls as with these examples.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230118 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, subtarget features were a bitfield with the underlying type being uint64_t.
Since several targets (X86 and ARM, in particular) have hit or were very close to hitting this bound, switching the features to use a bitset.
No functional change.
Differential Revision: http://reviews.llvm.org/D7065
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229831 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a safe interface to the machine independent InputArg struct
for accessing the index of the original (IR-level) argument. When a
non-native return type is lowered, we generate the hidden
machine-level sret argument on-the-fly. Before this fix, we were
representing this argument as OrigArgIndex == 0, which is an outright
lie. In particular this crashed in the AArch64 backend where we
actually try to access the type of the original argument.
Now we use a sentinel value for machine arguments that have no
original argument index. AArch64, ARM, Mips, and PPC now check for this
case before accessing the original argument.
Fixes <rdar://19792160> Null pointer assertion in AArch64TargetLowering
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229413 91177308-0d34-0410-b5e6-96231b3b80d8
Canonicalize access to function attributes to use the simpler API.
getAttributes().getAttribute(AttributeSet::FunctionIndex, Kind)
=> getFnAttribute(Kind)
getAttributes().hasAttribute(AttributeSet::FunctionIndex, Kind)
=> hasFnAttribute(Kind)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229218 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM's include tree and the use of using declarations to hide the
'legacy' namespace for the old pass manager.
This undoes the primary modules-hostile change I made to keep
out-of-tree targets building. I sent an email inquiring about whether
this would be reasonable to do at this phase and people seemed fine with
it, so making it a reality. This should allow us to start bootstrapping
with modules to a certain extent along with making it easier to mix and
match headers in general.
The updates to any code for users of LLVM are very mechanical. Switch
from including "llvm/PassManager.h" to "llvm/IR/LegacyPassManager.h".
Qualify the types which now produce compile errors with "legacy::". The
most common ones are "PassManager", "PassManagerBase", and
"FunctionPassManager".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229094 91177308-0d34-0410-b5e6-96231b3b80d8
The NodeMetadata are maintained in an incremental way. When an edge between
2 nodes has its cost updated, in the course of graph reduction for example,
the NodeMetadata need first to have the old edge cost removed, then the new
edge cost added. Only once the NodeMetadata have been fully updated, it
becomes safe to consider promoting the nodes to the
ConservativelyAllocatable or OptimallyReducible sets. Previously, this
promotion was occuring right after the removing the old cost, and this was
breaking the assumption that a ConservativelyAllocatable should not be
spilled.
This patch also adds asserts to:
- enforces the invariant that a node's reduction can not be downgraded,
- only not provably allocatable or optimally reducible nodes can be spilled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228816 91177308-0d34-0410-b5e6-96231b3b80d8
While various DAG combines try to guarantee that a vector SETCC
operation will have the same output size as input, there's nothing
intrinsic to either creation or LegalizeTypes that actually guarantees
it, so the function needs to be ready to handle a mismatch.
Fortunately this is easy enough, just extend or truncate the naturally
compared result.
I couldn't reproduce the failure in other backends that I know have
SIMD, so it's probably only an issue for these two due to shared
heritage.
Should fix PR21645.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228518 91177308-0d34-0410-b5e6-96231b3b80d8
from a conditional branch fed by an add/sub/mul-with-overflow node.
We previously used the SDLoc of the overflow node, for no good reason.
In some cases, this led to the Bcc and B terminators having different
source orders, and DBG_VALUEs being inserted between them.
The real issue is with the code that can't handle DBG_VALUEs between
terminators: the few places affected by this will be fixed soon.
In the meantime, fixing the SDLoc is a positive change no matter what.
No tests, as I have no idea how to get .loc emitted for branches?
rdar://19347133
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228463 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, Cortex-A72 is modelled as an Cortex-A57 except the fp
load balancing pass isn't enabled for Cortex-A72 as it's not
profitable to have it enabled for this core.
Patch by Ranjeet Singh.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228140 91177308-0d34-0410-b5e6-96231b3b80d8
The ARM assembler allows register alias redefinitions as long as it
targets the same register. r222319 broke that. In the AArch64 case
it would just produce a new warning, but in the ARM case it would
error out on previously accepted assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228109 91177308-0d34-0410-b5e6-96231b3b80d8
now that we have a correct and cached subtarget specific to the
function.
Also, finish providing a cached per-function subtarget in the core
LLVMTargetMachine -- that layer hadn't switched over yet.
The only use of the TargetMachine was to re-lookup a subtarget for
a particular function to work around the fact that TTI was immutable.
Now that it is per-function and we haved a cached subtarget, use it.
This still leaves a few interfaces with real warts on them where we were
passing Function objects through the TTI interface. I'll remove these
and clean their usage up in subsequent commits now that this isn't
necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227738 91177308-0d34-0410-b5e6-96231b3b80d8
intermediate TTI implementation template and instead query up to the
derived class for both the TargetMachine and the TargetLowering.
Most of the derived types had a TLI cached already and there is no need
to store a less precisely typed target machine pointer.
This will in turn make it much cleaner to look up the TLI via
a per-function subtarget instead of the generic subtarget, and it will
pave the way toward pulling the subtarget used for unroll preferences
into the same form once we are *always* using the function to look up
the correct subtarget.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227737 91177308-0d34-0410-b5e6-96231b3b80d8
TargetIRAnalysis access path directly rather than implementing getTTI.
This even removes getTTI from the interface. It's more efficient for
each target to just register a precise callback that creates their
specific TTI.
As part of this, all of the targets which are building their subtargets
individually per-function now build their TTI instance with the function
and thus look up the correct subtarget and cache it. NVPTX, R600, and
XCore currently don't leverage this functionality, but its trivial for
them to add it now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227735 91177308-0d34-0410-b5e6-96231b3b80d8
null.
For some reason some of the original TTI code supported a null target
machine. This seems to have been legacy, and I made matters worse when
refactoring this code by spreading that pattern further through the
various targets.
The TargetMachine can't actually be null, and it doesn't make sense to
support that use case. I've now consistently removed it and removed all
of the code trying to cope with that situation. This is probably good,
as several targets *didn't* cope with it being null despite the null
default argument in their constructors. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227734 91177308-0d34-0410-b5e6-96231b3b80d8
base which it adds a single analysis pass to, to instead return the type
erased TargetTransformInfo object constructed for that TargetMachine.
This removes all of the pass variants for TTI. There is now a single TTI
*pass* in the Analysis layer. All of the Analysis <-> Target
communication is through the TTI's type erased interface itself. While
the diff is large here, it is nothing more that code motion to make
types available in a header file for use in a different source file
within each target.
I've tried to keep all the doxygen comments and file boilerplate in line
with this move, but let me know if I missed anything.
With this in place, the next step to making TTI work with the new pass
manager is to introduce a really simple new-style analysis that produces
a TTI object via a callback into this routine on the target machine.
Once we have that, we'll have the building blocks necessary to accept
a function argument as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227685 91177308-0d34-0410-b5e6-96231b3b80d8
type erased interface and a single analysis pass rather than an
extremely complex analysis group.
The end result is that the TTI analysis can contain a type erased
implementation that supports the polymorphic TTI interface. We can build
one from a target-specific implementation or from a dummy one in the IR.
I've also factored all of the code into "mix-in"-able base classes,
including CRTP base classes to facilitate calling back up to the most
specialized form when delegating horizontally across the surface. These
aren't as clean as I would like and I'm planning to work on cleaning
some of this up, but I wanted to start by putting into the right form.
There are a number of reasons for this change, and this particular
design. The first and foremost reason is that an analysis group is
complete overkill, and the chaining delegation strategy was so opaque,
confusing, and high overhead that TTI was suffering greatly for it.
Several of the TTI functions had failed to be implemented in all places
because of the chaining-based delegation making there be no checking of
this. A few other functions were implemented with incorrect delegation.
The message to me was very clear working on this -- the delegation and
analysis group structure was too confusing to be useful here.
The other reason of course is that this is *much* more natural fit for
the new pass manager. This will lay the ground work for a type-erased
per-function info object that can look up the correct subtarget and even
cache it.
Yet another benefit is that this will significantly simplify the
interaction of the pass managers and the TargetMachine. See the future
work below.
The downside of this change is that it is very, very verbose. I'm going
to work to improve that, but it is somewhat an implementation necessity
in C++ to do type erasure. =/ I discussed this design really extensively
with Eric and Hal prior to going down this path, and afterward showed
them the result. No one was really thrilled with it, but there doesn't
seem to be a substantially better alternative. Using a base class and
virtual method dispatch would make the code much shorter, but as
discussed in the update to the programmer's manual and elsewhere,
a polymorphic interface feels like the more principled approach even if
this is perhaps the least compelling example of it. ;]
Ultimately, there is still a lot more to be done here, but this was the
huge chunk that I couldn't really split things out of because this was
the interface change to TTI. I've tried to minimize all the other parts
of this. The follow up work should include at least:
1) Improving the TargetMachine interface by having it directly return
a TTI object. Because we have a non-pass object with value semantics
and an internal type erasure mechanism, we can narrow the interface
of the TargetMachine to *just* do what we need: build and return
a TTI object that we can then insert into the pass pipeline.
2) Make the TTI object be fully specialized for a particular function.
This will include splitting off a minimal form of it which is
sufficient for the inliner and the old pass manager.
3) Add a new pass manager analysis which produces TTI objects from the
target machine for each function. This may actually be done as part
of #2 in order to use the new analysis to implement #2.
4) Work on narrowing the API between TTI and the targets so that it is
easier to understand and less verbose to type erase.
5) Work on narrowing the API between TTI and its clients so that it is
easier to understand and less verbose to forward.
6) Try to improve the CRTP-based delegation. I feel like this code is
just a bit messy and exacerbating the complexity of implementing
the TTI in each target.
Many thanks to Eric and Hal for their help here. I ended up blocked on
this somewhat more abruptly than I expected, and so I appreciate getting
it sorted out very quickly.
Differential Revision: http://reviews.llvm.org/D7293
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227669 91177308-0d34-0410-b5e6-96231b3b80d8
Add tie breaker to colorChainSet() sort so that processing order doesn't
depend on std::set order, which depends on pointer order, which is
unstable from run to run.
No test case as this is nearly impossible to reproduce.
Phabricator Review: http://reviews.llvm.org/D7265
Patch by Geoff Berry <gberry@codeaurora.org>!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227606 91177308-0d34-0410-b5e6-96231b3b80d8