Summary:
Set operation action for FP16 conversion opcodes, so the Op legalizer
can choose the gnu_* libcalls for Mips.
Set LoadExtAction and TruncStoreAction for f16 scalars and vectors to
prevent (fpext (load )) and (store (fptrunc)) from getting combined into
unsupported operations.
Added test cases to test that these operations are handled correctly
for f16 scalars and vectors. This patch depends on
http://reviews.llvm.org/D8755.
Reviewers: srhines
Subscribers: llvm-commits, ab
Differential Revision: http://reviews.llvm.org/D8804
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235341 91177308-0d34-0410-b5e6-96231b3b80d8
This is the last major parent class, so I'll probably start deleting
classes in batches now. Looks like many of the references to the DI*
hierarchy were updated organically along the way.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235331 91177308-0d34-0410-b5e6-96231b3b80d8
Replace uses of `DIScope` with `MDScope*`. There was one spot where
I've left an `MDScope*` uninitialized (where `DIScope` would have been
default-initialized to `nullptr`) -- this is intentional, since the
if/else that follows should unconditional assign it to a value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235327 91177308-0d34-0410-b5e6-96231b3b80d8
This commit fixes the code which adds lifetime markers in InlineFunction to skip
zero-sized allocas instead of asserting on them.
rdar://problem/20531155
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235312 91177308-0d34-0410-b5e6-96231b3b80d8
n/1 generates a quotient equal to n and a remainder of 0.
If this case is not recognized, then the SCEV divide() function
can return a remainder that is greater than or equal to the
denominator, which means the delinearized subscripts for the
test case will be incorrect.
Differential Revision: http://reviews.llvm.org/D9003
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235311 91177308-0d34-0410-b5e6-96231b3b80d8
The current implementations could exhibit some behavior differences:
raw_fd_ostream: Whatever the underlying fd does with seek+write. In a normal
file, the write position would be back to the old offset.
raw_svector_ostream: The write position is always the end of the stream, so
after pwrite the write position would be the new end. This matches what OS_X
(all BSD?) do with a pwrite in a O_APPEND fd.
Given that we don't need that feature and don't use O_APPEND a lot in LLVM,
just disallow it.
I am open to suggestions on renaming pwrite to something else, but this fixes
the issue for now.
Thanks to Yaron Keren for reporting it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235303 91177308-0d34-0410-b5e6-96231b3b80d8
We have to avoid converting a reference to a global into a reference to a local,
but it is fine to look past a local.
Patch by Vasileios Kalintiris.
I just moved the comment and added thet test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235300 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a regression introduced at revision 231243.
The target-independent selection algorithm in FastISel knows how to select
a SINT_TO_FP if the target is SSE but not AVX. That is because on X86, the
tablegen'd 'fastEmit' functions know how to select CVTSI2SSrr and CVTSI2SDrr.
Method X86FastISel::X86SelectSIToFP was therefore working under the
wrong assumption that the target was AVX. That assumption was incorrect since
we can have a target that is neither AVX nor SSE.
So, rather than asserting for the presence of AVX, we should have had an
early exit from 'X86SelectSIToFP' if the target was not AVX.
This patch fixes the issue replacing the invalid assertion with an early exit.
Thanks to Dimitry Andric for reporting this problem and for providing a small
reproducible testcase. Added test pr23273.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235295 91177308-0d34-0410-b5e6-96231b3b80d8
When an inline asm call has an output register marked as early-clobber, but
that same register is also an input operand, what should we do? GCC accepts
this, and is documented to accept this for read/write operands saying,
"Furthermore, if the earlyclobber operand is also a read/write operand, then
that operand is written only after it's used." For write-only operands, the
situation seems less clear, but I have at least one existing codebase that
assumes this will work, in part because it has syscall macros like this:
({ \
register uint64_t r0 __asm__ ("r0") = (__NR_ ## name); \
register uint64_t r3 __asm__ ("r3") = ((uint64_t) (arg0)); \
register uint64_t r4 __asm__ ("r4") = ((uint64_t) (arg1)); \
register uint64_t r5 __asm__ ("r5") = ((uint64_t) (arg2)); \
__asm__ __volatile__ \
("sc" \
: "=&r"(r0),"=&r"(r3),"=&r"(r4),"=&r"(r5) \
: "0"(r0), "1"(r3), "2"(r4), "3"(r5) \
: "r6","r7","r8","r9","r10","r11","r12","cr0","memory"); \
r3; \
})
Furthermore, with register aliases and subregister relationships that only the
backend knows about, rejecting this in the frontend seems like a difficult
proposition (if we wanted to do so). However, keeping the early-clobber flag on
the INLINEASM MI does not work for us, because it will cause the register's
live interval to end to soon (so it will not appear defined to be used as an
input).
Fortunately, fixing this does not seem hard: When forming the INLINEASM MI,
check to see if any of the early-clobber outputs are also inputs, and if so,
remove the early-clobber flag.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235283 91177308-0d34-0410-b5e6-96231b3b80d8
The fix ensures that scalar sources inserted into a vector are the correct bit size.
Integer scalar sources from BUILD_VECTOR and SCALAR_TO_VECTOR nodes may require truncation that this function doesn't currently support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235281 91177308-0d34-0410-b5e6-96231b3b80d8
Harden r235258 to support any integer bitwidth. The quick glance at
the reference made me think only i32 and i64 were valid types, but
they're not special, so any overload is legal.
Thanks to David Majnemer for noticing!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235261 91177308-0d34-0410-b5e6-96231b3b80d8
Followup to r235232, which caused PR23278.
We can't assume the memset and memcpy sizes have the same type, as
nothing in the language reference prevents that.
Instead, zext both to i64 if they disagree.
While there, robustify tests by using i8 %c rather than i8 0 for the
memset character.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235258 91177308-0d34-0410-b5e6-96231b3b80d8
Multiplying INT_MIN by 1 doesn't trigger nsw. However, shifting 1 into
the sign bit *does* trigger nsw.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235250 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of merging everything together, look at the users of
GlobalVariables, and try to group them by function, to create
sets of globals used "together".
Using that information, a less-aggressive alternative is to keep merging
everything together *except* globals that are only ever used alone, that
is, those for which it's clearly non-profitable to merge with others.
In my testing, grouping by Function is too aggressive, but grouping by
BasicBlock is too conservative. Anything in-between isn't trivially
available, so stick with Function grouping for now.
cl::opts are added for testing; both enabled by default.
A few of the testcases aren't testing the merging proper, but just
various edge cases when merging does occur. Update them to use the
previous grouping behavior. Also, one of the tests is unrelated to
GlobalMerge; change it accordingly.
While there, switch to r234666' flags rather than the brutal -O3.
Differential Revision: http://reviews.llvm.org/D8070
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235249 91177308-0d34-0410-b5e6-96231b3b80d8
Delete `DIDescriptor` and update the remaining users. I'll follow-up by
deleting subclasses in manageable groups (top-down).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235248 91177308-0d34-0410-b5e6-96231b3b80d8
The result is either an Untyped reg sequence, on ldN with N > 1, or
just the type of the input vector, on ld1. Don't force Untyped.
Instead, just use the type of the reg sequence.
This mirrors the behavior of createTuple, which feeds the LD1*_POST.
The narrow code path wasn't actually covered by tests, because V64
insert_vector_elt are widened to V128 before the LD1LANEpost combine
has the chance to run, usually.
The only case where it does run on V64 vectors is if the vector ops
legalizer ran. So, tickle the code with a ctpop.
Fixes PR23265.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235243 91177308-0d34-0410-b5e6-96231b3b80d8
Stop using `DIDescriptor` and its subclasses in the `DebugInfoFinder`
API, as well as the rest of the API hanging around in `DebugInfo.h`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235240 91177308-0d34-0410-b5e6-96231b3b80d8
Previously DebugInfoPDB could only load data for a PDB given a
path to the PDB. It could not open an EXE and find the matching
PDB and verify it matched, etc. This patch adds support for that
so that we can simply load debug information for a PDB directly.
Additionally, this patch extends DebugInfoPDB to support getting
source and line information for symbols.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235237 91177308-0d34-0410-b5e6-96231b3b80d8
The implementation of this GEP::getResultElementType will be refactored
to either rely on a member variable, or recompute the value from the
indicies (any preferences?).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235236 91177308-0d34-0410-b5e6-96231b3b80d8
A common idiom in some code is to do the following:
memset(dst, 0, dst_size);
memcpy(dst, src, src_size);
Some of the memset is redundant; instead, we can do:
memcpy(dst, src, src_size);
memset(dst + src_size, 0,
dst_size <= src_size ? 0 : dst_size - src_size);
Original patch by: Joel Jones
Differential Revision: http://reviews.llvm.org/D498
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235232 91177308-0d34-0410-b5e6-96231b3b80d8
This commit removes `DebugLocList` and replaces it with
`DebugLocStream`.
- `DebugLocEntry` no longer contains its byte/comment streams.
- The `DebugLocEntry` list for a variable/inlined-at pair is allocated
on the stack, and released right after `DebugLocEntry::finalize()`
(possible because of the refactoring in r231023). Now, only one
list is in memory at a time now.
- There's a single unified stream for the `.debug_loc` section that
persists, stored in the new `DebugLocStream` data structure.
The last point is important: this collapses the nested `SmallVector<>`s
from `DebugLocList` into unified streams. We previously had something
like the following:
vec<tuple<Label, CU,
vec<tuple<BeginSym, EndSym,
vec<Value>,
vec<char>,
vec<string>>>>>
A `SmallVector` can avoid allocations, but is statically fairly large
for a vector: three pointers plus the size of the small storage, which
is the number of elements in small mode times the element size).
Nesting these is expensive, since an inner vector's size contributes to
the element size of an outer one. (Nesting any vector is expensive...)
In the old data structure, the outer vector's *element* size was 632B,
excluding allocation costs for when the middle and inner vectors
exceeded their small sizes. 312B of this was for the "three" pointers
in the vector-tree beneath it. If you assume 1M functions with an
average of 10 variable/inlined-at pairs each (in an LTO scenario),
that's almost 6GB (besides inner allocations), with almost 3GB for the
"three" pointers.
This came up in a heap profile a little while ago of a `clang -flto -g`
bootstrap, with `DwarfDebug::collectVariableInfo()` using something like
10-15% of the total memory.
With this commit, we have:
tuple<vec<tuple<Label, CU, Offset>>,
vec<tuple<BeginSym, EndSym, Offset, Offset>>,
vec<char>,
vec<string>>
The offsets are used to create `ArrayRef` slices of adjacent
`SmallVector`s. This reduces the number of vectors to four (unrelated
to the number of variable/inlined-at pairs), and caps the number of
allocations at the same number.
Besides saving memory and limiting allocations, this is NFC.
I don't know my way around this code very well yet, but I wonder if we
could go further: why stream to a side-table, instead of directly to the
output stream?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235229 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to r235222, but for the weak symbol case.
In an "ideal" assembler/object format an expression would always refer to the
final value and A-B would only be computed from a section in the same
comdat as A and B with A and B strong.
Unfortunately that is not the case with debug info on ELF, so we need an
heuristic. Since we need an heuristic, we may as well use the same one as
gas:
* call weak_sym : produces a relocation, even if in the same section.
* A - weak_sym and weak_sym -A: don't produce a relocation if we can
compute it.
This fixes pr23272 and changes the fix of pr22815 to match what gas does.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235227 91177308-0d34-0410-b5e6-96231b3b80d8
They would break the SelectionDAG.
Note that the opposite load->vector dependency is already obvious in:
(LD1*post vec, ..)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235224 91177308-0d34-0410-b5e6-96231b3b80d8
CatchHigh may be smaller than TryHigh if we reuse an outlined catch
handler for two different invokes with different EH states. We have no
evidence which shows that CatchHigh must be greater than TryHigh or
TryLow. We can revisit this if we turn out to be wrong.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235223 91177308-0d34-0410-b5e6-96231b3b80d8
Part of pr23272.
A small annoyance with the assembly syntax we implement is that given an
expression there is no way to know if what is desired is the value of that
expression for the symbols in this file or for the final values of those
symbols in a link.
The first case is useful for use in sections that get discarded or ignored
if the section they are describing is discarded.
For axample, consider A-B where A and B are in the same comdat section.
We can compute the value of the difference in the section that is present in
the current .o and if that section survives to the final DSO the value will
still will be correct.
But the section is in a comdat. Another section from another object file
might be used istead. We know that that section will define A and B, but
we have no idea what the value of A-B might be.
In practice we have to assume that the intention is to compute the value
in the current section since otherwise the is no way to create something like
the debug aranges section.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235222 91177308-0d34-0410-b5e6-96231b3b80d8
Now (with a few carefully placed suppressions relating to general type
serialization, etc) we can round trip a simple load through bitcode and
textual IR without calling getElementType on a PointerType.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235221 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
- Handle TypePromoteFloat in switch statements
- Move an expression into an assert to avoid unused variable in
non-assert builds.
Reviewers: srhines, ab
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9086
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235220 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch adds legalization support to operate on FP16 as a load/store type
and do operations on it as floats.
Tests for ARM are added to test/CodeGen/ARM/fp16-promote.ll
Reviewers: srhines, t.p.northover
Differential Revision: http://reviews.llvm.org/D8755
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235215 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Implement the method FastMaterializeAlloca in Mips fast-isel
Based on a patch by Reed Kotler.
Test Plan:
Passes test-suite at O0/O2 for mips32 r1/r2
fastalloca.ll
Reviewers: dsanders, rkotler
Subscribers: rfuhler, llvm-commits
Differential Revision: http://reviews.llvm.org/D6742
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235213 91177308-0d34-0410-b5e6-96231b3b80d8
Catch blocks which are empty may be in the same state as their try
blocks. It is not meaningful to give the catch block its own state
number in this case because it can't do anything exceptional.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235212 91177308-0d34-0410-b5e6-96231b3b80d8
When debugging LTO issues with ld64, we use -save-temps to save the merged
optimized bitcode file, then invoke ld64 again on the single bitcode file.
The saved bitcode file is already internalized, so we can call
lto_codegen_set_should_internalize and skip running internalization again.
rdar://20227235
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235211 91177308-0d34-0410-b5e6-96231b3b80d8
Stop storing the `MDLocalVariable` in the `DebugLocEntry::Value`s. We
generate the list of `DebugLocEntry`s separately for each
variable/inlined-at pair, so the variable never actually changes here.
This is effectively NFC (aside from saving some memory and CPU time).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235202 91177308-0d34-0410-b5e6-96231b3b80d8
We can calculate the variable type up front before calling
`DebugLocEntry::finalize()`. In fact, since we only care about the type
if it's an `MDBasicType`, don't even bother resolving it using the type
identifier map.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235201 91177308-0d34-0410-b5e6-96231b3b80d8
The v1i128 type is needed for the quadword add/substract instructions introduced
in POWER8. Futhermore, the PowerPC ABI specifies that parameters of type v1i128
are to be passed in a single vector register, while parameters of type i128 are
passed in pairs of GPRs. Thus, it is necessary to be able to differentiate
between v1i128 and i128 in LLVM.
http://reviews.llvm.org/D8564
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235198 91177308-0d34-0410-b5e6-96231b3b80d8
The i128 type is needed as a builtin type in order to support the v1i128 vector
type. The PowerPC ABI requires that the i128 and v1i128 types are handled
differently when passed as parameters to functions (i128 is passed in pairs of
GPRs, v1i128 is passed in a single vector register).
http://reviews.llvm.org/D8564
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235196 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Add shift operators implementation to fast-isel for Mips. These are shift ops
for non legal forms, i.e. i8 and i16.
Based on a patch by Reed Kotler.
Test Plan:
Reviewers: dsanders
Subscribers: echristo, rfuhler, llvm-commits
Differential Revision: http://reviews.llvm.org/D6726
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235194 91177308-0d34-0410-b5e6-96231b3b80d8
This is a followon to r233681 - I'd misunderstood the semantics of FTRUNC,
and had confused it with (FP_ROUND ..., 0).
Thanks for Ahmed Bougacha for his post-commit review!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235191 91177308-0d34-0410-b5e6-96231b3b80d8
Avoid double closing of the handle by testing GetLastErr for
ERROR_INVALID_HANDLE and not calling CloseHandle(PI.ProcessHandle) then.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235184 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Previously, the presence of KILL instructions would block valid candidates
from filling a specific delay slot. With the elimination of the KILL
instructions, in the appropriate range, we are able to fill more slots and
keep the information from future def/use analysis consistent.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: hfinkel, llvm-commits
Differential Revision: http://reviews.llvm.org/D7724
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235183 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
For example, a common idiom was 'isN64 ? Mips::SP_64 : Mips::SP'. This has
been moved to MipsABIInfo and replaced with 'ABI.GetStackPtr()'.
There are others that should also be moved. This patch sticks to the ones that
are obviously non-functional. The others have minor mistakes that need fixing
at the same time, mostly involving checks for 64-bit GPR's instead of checks
for 64-bit pointers.
Reviewers: tomatabacu
Reviewed By: tomatabacu
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8972
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235173 91177308-0d34-0410-b5e6-96231b3b80d8
Linkers normally read all the relocations upfront to compute the references
between sections. Putting them together is a bit more cache friendly.
I benchmarked linking a Release+Asserts clang with gold on a vm. I tried all
4 combinations of --gc-sections/no --gc-section hot and cold cache.
I cleared the cache with
echo 3 > /proc/sys/vm/drop_caches
and warmed it up by running the link once before timing the subsequent ones.
With cold cache and --gc-sections the time goes from
1.86130781665 +- 0.01713126697463843 seconds
to
1.82370735105 +- 0.014127522318814516 seconds
With cold cache and no --gc-sections the time goes from
1.6087245435500002 +- 0.012999066825178644 seconds
to
1.5687122041500001 +- 0.013145850126026619 seconds
With hot cache and no --gc-sections the time goes from
0.926200939 ( +- 0.33% ) seconds
to
0.907200079 ( +- 0.31% ) seconds
With hot cache and gc sections the time goes from
1.183038049 ( +- 0.34% ) seconds
to
1.147355862 ( +- 0.39% ) seconds
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235165 91177308-0d34-0410-b5e6-96231b3b80d8
Use an extra bit in the CCInfo to flag the newer version of the
instructiont hat includes the type explicitly.
Tested the newer error cases I added, but didn't add tests for the finer
granularity improvements to existing error paths.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235160 91177308-0d34-0410-b5e6-96231b3b80d8
This now emits simple, unoptimized xdata tables for __C_specific_handler
based on the handlers listed in @llvm.eh.actions calls produced by
WinEHPrepare.
This adds support for running __finally blocks when exceptions are
thrown, and removes the old landingpad fan-in codepath.
I ran some manual execution tests on small basic test cases with and
without optimization, as well as on Chrome base_unittests, which uses a
small amount of SEH. I'm sure there are bugs, and we may need to
revert.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235154 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
An alternative is to use a worklist approach. However, that approach
would break the traversing order so that we couldn't lookup SeenExprs
efficiently. I don't see a clear winner here, so I picked the easier approach.
Along with two minor improvements:
1. preserves ScalarEvolution by forgetting instructions replaced
2. removes dead code locally avoiding the need of running DCE afterwards
Test Plan: add to slsr-add.ll a test that requires multiple iterations
Reviewers: broune, dberlin, atrick, meheff
Reviewed By: atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9058
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235151 91177308-0d34-0410-b5e6-96231b3b80d8
Found by code inspection, but breaking i16 at least breaks other tests.
They aren't checking this in particular though, so also add some
explicit tests for the already working types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235148 91177308-0d34-0410-b5e6-96231b3b80d8
See r230786 and r230794 for similar changes to gep and load
respectively.
Call is a bit different because it often doesn't have a single explicit
type - usually the type is deduced from the arguments, and just the
return type is explicit. In those cases there's no need to change the
IR.
When that's not the case, the IR usually contains the pointer type of
the first operand - but since typed pointers are going away, that
representation is insufficient so I'm just stripping the "pointerness"
of the explicit type away.
This does make the IR a bit weird - it /sort of/ reads like the type of
the first operand: "call void () %x(" but %x is actually of type "void
()*" and will eventually be just of type "ptr". But this seems not too
bad and I don't think it would benefit from repeating the type
("void (), void () * %x(" and then eventually "void (), ptr %x(") as has
been done with gep and load.
This also has a side benefit: since the explicit type is no longer a
pointer, there's no ambiguity between an explicit type and a function
that returns a function pointer. Previously this case needed an explicit
type (eg: a function returning a void() function was written as
"call void () () * @x(" rather than "call void () * @x(" because of the
ambiguity between a function returning a pointer to a void() function
and a function returning void).
No ambiguity means even function pointer return types can just be
written alone, without writing the whole function's type.
This leaves /only/ the varargs case where the explicit type is required.
Given the special type syntax in call instructions, the regex-fu used
for migration was a bit more involved in its own unique way (as every
one of these is) so here it is. Use it in conjunction with the apply.sh
script and associated find/xargs commands I've provided in rr230786 to
migrate your out of tree tests. Do let me know if any of this doesn't
cover your cases & we can iterate on a more general script/regexes to
help others with out of tree tests.
About 9 test cases couldn't be automatically migrated - half of those
were functions returning function pointers, where I just had to manually
delete the function argument types now that we didn't need an explicit
function type there. The other half were typedefs of function types used
in calls - just had to manually drop the * from those.
import fileinput
import sys
import re
pat = re.compile(r'((?:=|:|^|\s)call\s(?:[^@]*?))(\s*$|\s*(?:(?:\[\[[a-zA-Z0-9_]+\]\]|[@%](?:(")?[\\\?@a-zA-Z0-9_.]*?(?(3)"|)|{{.*}}))(?:\(|$)|undef|inttoptr|bitcast|null|asm).*$)')
addrspace_end = re.compile(r"addrspace\(\d+\)\s*\*$")
func_end = re.compile("(?:void.*|\)\s*)\*$")
def conv(match, line):
if not match or re.search(addrspace_end, match.group(1)) or not re.search(func_end, match.group(1)):
return line
return line[:match.start()] + match.group(1)[:match.group(1).rfind('*')].rstrip() + match.group(2) + line[match.end():]
for line in sys.stdin:
sys.stdout.write(conv(re.search(pat, line), line))
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235145 91177308-0d34-0410-b5e6-96231b3b80d8
r235050 dropped the inlined-at field from `MDLocalVariable`, deferring
to the `!dbg` attachments. Fix `UserValue` to take the `!dbg` into
account when differentiating between variables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235140 91177308-0d34-0410-b5e6-96231b3b80d8
A big-endian vector return needs a byte-swap which we aren't doing right now.
For now just bail on these cases to get correctness back.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235133 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If a pointer is marked as dereferenceable_or_null(N), LLVM assumes it
is either `null` or `dereferenceable(N)` or both. This change only
introduces the attribute and adds a token test case for the `llvm-as`
/ `llvm-dis`. It does not hook up other parts of the optimizer to
actually exploit the attribute -- those changes will come later.
For pointers in address space 0, `dereferenceable(N)` is now exactly
equivalent to `dereferenceable_or_null(N)` && `nonnull`. For other
address spaces, `dereferenceable(N)` is potentially weaker than
`dereferenceable_or_null(N)` && `nonnull` (since we could have a null
`dereferenceable(N)` pointer).
The motivating case for this change is Java (and other managed
languages), where pointers are either `null` or dereferenceable up to
some usually known-at-compile-time constant offset.
Reviewers: rafael, hfinkel
Reviewed By: hfinkel
Subscribers: nicholas, llvm-commits
Differential Revision: http://reviews.llvm.org/D8650
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235132 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This fixes a left-over efficiency issue in D8950.
As Andrew and Daniel suggested, we can store the candidates in a stack
and pop the top element when it does not dominate the current
instruction. This reduces the worst-case time complexity to O(n).
Test Plan: a new test in nary-add.ll that exercises this optimization.
Reviewers: broune, dberlin, meheff, atrick
Reviewed By: atrick
Subscribers: llvm-commits, sanjoy
Differential Revision: http://reviews.llvm.org/D9055
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235129 91177308-0d34-0410-b5e6-96231b3b80d8
This is very similar to D8486 / r232852 (vperm2). If we treat insertps intrinsics
as shufflevectors, we can optimize them better.
I've left all but the full zero case of the zero mask variants out of this patch.
I don't think those can be converted into a single shuffle in all cases, but I'd
be happy to be proven wrong as I was for vperm2f128.
Either way, we'd need to support whatever sequence we come up with for those cases
in the backend before converting them here.
Differential Revision: http://reviews.llvm.org/D8833
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235124 91177308-0d34-0410-b5e6-96231b3b80d8
As a step toward killing `DIDescriptor` and its subclasses, remove it
from the `DIBuilder` API. Replace the subclasses with appropriate
pointers from the new debug info hierarchy. There are a couple of
possible surprises in type choices for out-of-tree frontends:
- Subroutine types: `MDSubroutineType`, not `MDCompositeTypeBase`.
- Composite types: `MDCompositeType`, not `MDCompositeTypeBase`.
- Scopes: `MDScope`, not `MDNode`.
- Generic debug info nodes: `DebugNode`, not `MDNode`.
This is part of PR23080.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235111 91177308-0d34-0410-b5e6-96231b3b80d8
This is a major rewrite of the SelectionDAG switch lowering. The previous code
would lower switches as a binary tre, discovering clusters of cases
suitable for lowering by jump tables or bit tests as it went along. To increase
the likelihood of finding jump tables, the binary tree pivot was selected to
maximize case density on both sides of the pivot.
By not selecting the pivot in the middle, the binary trees would not always
be balanced, leading to performance problems in the generated code.
This patch rewrites the lowering to search for clusters of cases
suitable for jump tables or bit tests first, and then builds the binary
tree around those clusters. This way, the binary tree will always be balanced.
This has the added benefit of decoupling the different aspects of the lowering:
tree building and jump table or bit tests finding are now easier to tweak
separately.
For example, this will enable us to balance the tree based on profile info
in the future.
The algorithm for finding jump tables is O(n^2), whereas the previous algorithm
was O(n log n) for common cases, and quadratic only in the worst-case. This
doesn't seem to be major problem in practice, e.g. compiling a file consisting
of a 10k-case switch was only 30% slower, and such large switches should be rare
in practice. Compiling e.g. gcc.c showed no compile-time difference. If this
does turn out to be a problem, we could limit the search space of the algorithm.
This commit also disables all optimizations during switch lowering in -O0.
Differential Revision: http://reviews.llvm.org/D8649
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235101 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Previously, this was only happening for functions, but because of .insn, objects can also be marked now.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8007
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235095 91177308-0d34-0410-b5e6-96231b3b80d8
Required some tweaking of ValueMap to accommodate a move-only value
type. No functional change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235091 91177308-0d34-0410-b5e6-96231b3b80d8
In order to introduce v8.1a-specific entities, Mappers should be aware of SubtargetFeatures available.
This patch introduces refactoring, that will then allow to easily introduce:
- v8.1-specific "pan" PState for PStateMapper (PAN extension)
- v8.1-specific sysregs for SysRegMapper (LOR,VHE extensions)
Reviewers: jmolloy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8496
Patch by Tom Coxon
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235089 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This assembler directive marks the current label as an instruction label in microMIPS and MIPS16.
This initial implementation works only for microMIPS.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8006
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235084 91177308-0d34-0410-b5e6-96231b3b80d8
Fix for test case found by James Molloy - TRUNCATE of constant build vectors can be more simply achieved by simply replacing with a new build vector node with the truncated value type - no need to touch the scalar operands at all.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235079 91177308-0d34-0410-b5e6-96231b3b80d8
The only type that isn't an integer, isn't floating point, and isn't
a vector; ladies and gentlemen, the gift that keeps on giving: x86_mmx!
Fixes PR23246.
Original message (reverted in r235062):
[CodeGen] Combine concat_vectors of scalars into build_vector.
Combine something like:
(v8i8 concat_vectors (v2i8 bitcast (i16)) x4)
into:
(v8i8 (bitcast (v4i16 BUILD_VECTOR (i16) x4)))
If any of the scalars are floating point, use that throughout.
Differential Revision: http://reviews.llvm.org/D8948
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235072 91177308-0d34-0410-b5e6-96231b3b80d8
Delete `DIRef<>`, and replace the remaining uses of it with
`TypedDebugNodeRef<>`. To minimize code churn, I've added typedefs from
`MDTypeRef` to `DITypeRef` (etc.).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235071 91177308-0d34-0410-b5e6-96231b3b80d8
Try to appease the build bots. We should write rtdyld test cases for these
to make them testible on other platforms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235070 91177308-0d34-0410-b5e6-96231b3b80d8
PR23080 is almost finished. With this commit, there's no consequential
API in `DIDescriptor` and its subclasses. What's left?
- Default-constructed to `nullptr`.
- Handy `const_cast<>` (constructed from `const`, but accessors are
non-`const`).
I think the safe way to catch those is to delete the classes and fix
compile errors. That'll be my next step, after I delete the `DITypeRef`
(etc.) wrapper around `MDTypeRef`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235069 91177308-0d34-0410-b5e6-96231b3b80d8
Continuing PR23080, gut `DIType` and its various subclasses, leaving
behind thin wrappers around the pointer types in the new debug info
hierarchy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235064 91177308-0d34-0410-b5e6-96231b3b80d8
The way we split SEH catch-all blocks can leave some dead EH values
behind at -O0. Try to remove them, and if we fail, replace them all with
undef.
Fixes a crash when removing the old unreachable landingpad which is
still used by extractvalue instructions in the catch-all block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235061 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This allows us to get rid of the original unrelocated object file after
we're done processing relocations (but before applying them).
MachO and COFF already do not require this (currently we have temporary hacks
to prevent ownership from being released, but those are brittle and should be
removed soon).
The placeholder mechanism allowed the relocation resolver to look at original
object file to obtain more information that are required to apply the
relocations. This is usually necessary in two cases:
- For relocations targetting sub-word memory locations, there may be pieces
of the instruction at the target address which we should not override.
- Some relocations on some platforms allow an extra addend to be encoded in
their immediate fields.
The problem is that in the second case the information cannot be recovered
after the relocations have been applied once because they will have been
overridden. In the first case we also need to be careful to not use any bits
that aren't fixed and may have been overriden by applying a first relocation.
In the past both have been fixed by just looking at original object file. This
patch attempts to recover the information from the first by looking at the
relocated object file, while the extra addend in the second case is read
upon relocation processing and addend to the regular addend.
I have tested this on X86. Other platforms represent my best understanding
of how those relocations should work, but I may have missed something because
I do not have access to those platforms.
We will keep the ugly workarounds in place for a couple of days, so this commit
can be reverted if it breaks the bots.
Reviewers: petarj, t.p.northover, lhames
Reviewed By: lhames
Subscribers: aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D9028
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235060 91177308-0d34-0410-b5e6-96231b3b80d8
Remove the accessors of `DIDerivedType` that downcast to
`MDDerivedType`, shifting the `cast<MDDerivedType>` into the callers.
Also remove `DIType::isValid()`, which is really just a check against
`nullptr` at this point.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235059 91177308-0d34-0410-b5e6-96231b3b80d8
Continuing gutting `DIDescriptor` subclasses; this edition,
`DICompileUnit` and `DIFile`. In the name of PR23080.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235055 91177308-0d34-0410-b5e6-96231b3b80d8
Remove 'inlinedAt:' from MDLocalVariable. Besides saving some memory
(variables with it seem to be single largest `Metadata` contributer to
memory usage right now in -g -flto builds), this stops optimization and
backend passes from having to change local variables.
The 'inlinedAt:' field was used by the backend in two ways:
1. To tell the backend whether and into what a variable was inlined.
2. To create a unique id for each inlined variable.
Instead, rely on the 'inlinedAt:' field of the intrinsic's `!dbg`
attachment, and change the DWARF backend to use a typedef called
`InlinedVariable` which is `std::pair<MDLocalVariable*, MDLocation*>`.
This `DebugLoc` is already passed reliably through the backend (as
verified by r234021).
This commit removes the check from r234021, but I added a new check
(that will survive) in r235048, and changed the `DIBuilder` API in
r235041 to require a `!dbg` attachment whose 'scope:` is in the same
`MDSubprogram` as the variable's.
If this breaks your out-of-tree testcases, perhaps the script I used
(mdlocalvariable-drop-inlinedat.sh) will help; I'll attach it to PR22778
in a moment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235050 91177308-0d34-0410-b5e6-96231b3b80d8
Before we start to rely on valid `!dbg` attachments, add a check to the
verifier that `@llvm.dbg.*` intrinsics always have one. Also check that
the `scope:` fields point at the same `MDSubprogram`.
This is in the context of PR22778. The check that the `inlinedAt:`
fields agree has baked for a while (since r234021), so I'll kill [1] the
`MDLocalVariable::getInlinedAt()` field soon.
[1]: http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20150330/269387.html
Unfortunately, that means it's impossible to keep the current `Verifier`
checks, which rely on comparing `inlinedAt:` fields. We'll be able to
keep the checks I'm adding here.
If this breaks your out-of-tree testcases, the upgrade script
(add-dbg-to-intrinsics.sh) attached to PR22778 that I used for r235040
might fix them for you.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235048 91177308-0d34-0410-b5e6-96231b3b80d8
Change `DIBuilder::insertDeclare()` and `insertDbgValueIntrinsic()` to
take an `MDLocation*`/`DebugLoc` parameter which it attaches to the
created intrinsic. Assert at creation time that the `scope:` field's
subprogram matches the variable's. There's a matching `clang` commit to
use the API.
The context for this is PR22778, which is removing the `inlinedAt:`
field from `MDLocalVariable`, instead deferring to the `!dbg` location
attached to the debug info intrinsic. The best way to ensure we always
have a `!dbg` attachment is to require one at creation time. I'll be
adding verifier checks next, but this API change is the best way to
shake out frontend bugs.
Note: I added an `llvm_unreachable()` in `bindings/go` and passed in
`nullptr` for the `DebugLoc`. The `llgo` folks will eventually need to
pass a valid `DebugLoc` here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235041 91177308-0d34-0410-b5e6-96231b3b80d8
This avoids emitting code for unreachable landingpad blocks that contain
calls to llvm.eh.actions and indirectbr.
It's also a first step towards unifying the SEH and WinEH lowering
codepaths. I'm keeping the old fan-in lowering of SEH around until the
preparation version works well enough that we can switch over without
breaking existing users.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235037 91177308-0d34-0410-b5e6-96231b3b80d8
BXJ was incorrectly said to be unsupported in ARMv8-A. It is not
supported in the A64 instruction set, but it is supported in the T32
and A32 instruction sets, because it's listed as an instruction in the
ARM ARM section F7.1.28.
Using SP as an operand to BXJ changed from UNPREDICTABLE to
PREDICTABLE in v8-A. This patch reflects that update as well.
This was found by MCHammer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235024 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
With this patch, SLSR may rewrite
S1: X = B + i * S
S2: Y = B + i' * S
to
S2: Y = X + (i' - i) * S
A secondary improvement: if (i' - i) is a power of 2, emit Y as X + (S << log(i' - i)). (S << log(i' -i)) is in a canonical form and thus more likely GVN'ed than (i' - i) * S.
Test Plan: slsr-add.ll
Reviewers: hfinkel, sanjoy, meheff, broune, eliben
Reviewed By: eliben
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8983
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235019 91177308-0d34-0410-b5e6-96231b3b80d8
This is a 1-line patch (with a TODO for AVX because that will affect
even more regression tests) that lets us substitute the appropriate
64-bit store for the float/double/int domains.
It's not clear to me exactly what the difference is between the 0xD6 (MOVPQI2QImr) and
0x7E (MOVSDto64mr) opcodes, but this is apparently the right choice.
Differential Revision: http://reviews.llvm.org/D8691
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235014 91177308-0d34-0410-b5e6-96231b3b80d8
Set the transform bar at 2 divisions because the fastest current
x86 FP divider circuit is in SandyBridge / Haswell at 10 cycle
latency (best case) relative to a 5 cycle multiplier.
So that's the worst case for this transform (no latency win),
but multiplies are obviously pipelined while divisions are not,
so there's still a big throughput win which we would expect to
show up in typical FP code.
These are the sequences I'm comparing:
divss %xmm2, %xmm0
mulss %xmm1, %xmm0
divss %xmm2, %xmm0
Becomes:
movss LCPI0_0(%rip), %xmm3 ## xmm3 = mem[0],zero,zero,zero
divss %xmm2, %xmm3
mulss %xmm3, %xmm0
mulss %xmm1, %xmm0
mulss %xmm3, %xmm0
[Ignore for the moment that we don't optimize the chain of 3 multiplies
into 2 independent fmuls followed by 1 dependent fmul...this is the DAG
version of: https://llvm.org/bugs/show_bug.cgi?id=21768 ...if we fix that,
then the transform becomes even more profitable on all targets.]
Differential Revision: http://reviews.llvm.org/D8941
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235012 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Refactor MipsAsmParser::getATReg to return an internal register number instead of a register index.
Also change all the int's to unsigned, seeing as the current AT register index is stored as an unsigned in MipsAssemblerOptions.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8478
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234996 91177308-0d34-0410-b5e6-96231b3b80d8
This commit makes LLVM not estimate branch probabilities when doing a
single bit bitmask tests.
The code that originally made me discover this is:
if ((a & 0x1) == 0x1) {
..
}
In this case we don't actually have any branch probability information
and should not assume to have any. LLVM transforms this into:
%and = and i32 %a, 1
%tobool = icmp eq i32 %and, 0
So, in this case, the result of a bitwise and is compared against 0,
but nevertheless, we should not assume to have probability
information.
CodeGen/ARM/2013-10-11-select-stalls.ll started failing because the
changed probabilities changed the results of
ARMBaseInstrInfo::isProfitableToIfCvt() and led to an Ifcvt of the
diamond in the test. AFAICT, the test was never meant to test this and
thus changing the test input slightly to not change the probabilities
seems like the best way to preserve the meaning of the test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234979 91177308-0d34-0410-b5e6-96231b3b80d8
even if there are no references to them in the code.
This allows exceptions thrown from JIT'd code to be caught by the JIT itself.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234975 91177308-0d34-0410-b5e6-96231b3b80d8
Remove all the global bits to do with preserving use-list order by
moving the `cl::opt`s to the individual tools that want them. There's a
minor functionality change to `libLTO`, in that you can't send in
`-preserve-bc-uselistorder=false`, but making that bit settable (if it's
worth doing) should be through explicit LTO API.
As a drive-by fix, I removed some includes of `UseListOrder.h` that were
made unnecessary by recent commits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234973 91177308-0d34-0410-b5e6-96231b3b80d8
Now the callers of `PrintModulePass()` (etc.) that care about use-list
order in assembly pass in the flag.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234969 91177308-0d34-0410-b5e6-96231b3b80d8
Pull the `-preserve-ll-uselistorder` bit up through all the callers of
`Module::print()`. I converted callers of `operator<<` to
`Module::print()` where necessary to pull the bit through.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234968 91177308-0d34-0410-b5e6-96231b3b80d8
For consistency, start pulling out `-preserve-ll-uselistorder`. I'll
drop the global state for both eventually. This pulls it up to
`Module::print()` (but not past there).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234966 91177308-0d34-0410-b5e6-96231b3b80d8
Change the callers of `WriteToBitcodeFile()` to pass `true` or
`shouldPreserveBitcodeUseListOrder()` explicitly. I left the callers
that want to send `false` alone.
I'll keep pushing the bit higher until hopefully I can delete the global
`cl::opt` entirely.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234957 91177308-0d34-0410-b5e6-96231b3b80d8
Canonicalize access to whether to preserve use-list order in bitcode on
a `bool` stored in `ValueEnumerator`. Next step, expose this as a
`bool` through `WriteBitcodeToFile()`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234956 91177308-0d34-0410-b5e6-96231b3b80d8
Now we don't have to do 2 synchronized passes to compute offsets and then
write the file.
This also includes a fix for the corner case of seeking in /dev/null. It
is not an error, but on some systems (Linux) the returned offset is
always 0. An error is signaled by returning -1. This is checked by
the existing tests now that "clang -o /dev/null ..." seeks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234952 91177308-0d34-0410-b5e6-96231b3b80d8
Since adding invokes of llvm.donothing to cleanups, we come here now,
and trivial EH cleanup usage from clang fails to compile.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234948 91177308-0d34-0410-b5e6-96231b3b80d8
Inlining such intrinsics is very difficult, since you need to
simultaneously transform many calls to llvm.framerecover and potentially
duplicate the functions containing them. Normally this intrinsic isn't
added until EH preparation, which is part of the backend pass pipeline
after inlining. However, if it were to get fed through the inliner,
this change will ensure that it doesn't break the code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234937 91177308-0d34-0410-b5e6-96231b3b80d8
But keep it on by default in `llvm-as`, `opt`, `bugpoint`, `llvm-link`,
`llvm-extract`, and `LTOCodeGenerator`. Part of PR5680.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234921 91177308-0d34-0410-b5e6-96231b3b80d8
Rename options to be consistent with the name of `verify-uselistorder`,
and update `DEBUG_TYPE` (etc.) to be consistent.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234919 91177308-0d34-0410-b5e6-96231b3b80d8
This causes badness for GDB which expects to find a definition in any
compile_unit that has an entry for the variable in its pubnames.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234915 91177308-0d34-0410-b5e6-96231b3b80d8
StringRef is unsafe here, since SectionEntry instances can outlive the
ObjectFile instances they are created from.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234910 91177308-0d34-0410-b5e6-96231b3b80d8
With commit r219944, InstCombine can now turn a sqrtl into a llvm.fabs.f64.
The call graph edge originally representing the call to sqrtl becomes invalid.
This patch modifies CGPassManager::RefreshCallGraph() to remove the invalid
call graph edge, which can triggers an assert in
CallGraphNode::addCalledFunction().
Phabricator Review: http://reviews.llvm.org/D7705
Patch by Lawrence Hu <lawrence@codeaurora.org>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234902 91177308-0d34-0410-b5e6-96231b3b80d8
if ((a & 0x1) == 0x1) {
..
}
In this case we don't actually have any branch probability information and
should not assume to have any. LLVM transforms this into:
%and = and i32 %a, 1
%tobool = icmp eq i32 %and, 0
So, in this case, the result of a bitwise and is compared against 0,
but nevertheless, we should not assume to have probability
information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234898 91177308-0d34-0410-b5e6-96231b3b80d8
The ARMv8 ARMARM states that for these instructions in A64 state:
"Unspecified bits in "imm5" are ignored but should be set to zero by an assembler.", (imm4 for INS).
Make the disassembler accept any encoding with these ignored bits set to 1.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234896 91177308-0d34-0410-b5e6-96231b3b80d8
This pass will always try to insert llvm.SI.ifbreak intrinsics
in the same block that its conditional value is computed in. This is
a problem when conditions for breaks or continue are computed outside
of the loop, because the llvm.SI.ifbreak intrinsic ends up being inserted
outside of the loop.
This patch fixes this problem by inserting the llvm.SI.ifbreak
intrinsics in the loop header when the condition is computed outside
the loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234891 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Without this check the following case failed:
Skip a SubBlock which is not a MODULE_BLOCK_ID nor a BLOCKINFO_BLOCK_ID
Got to end of file
TheModule would still be == nullptr, and we would subsequentially fail
when materializing the Module (assert at the start of
BitcodeReader::MaterializeModule).
Bug found with AFL.
Reviewers: dexonsmith, rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9014
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234887 91177308-0d34-0410-b5e6-96231b3b80d8
Some targets (ie. Mips) have additional rules for ordering the relocation
table entries. Allow them to override generic sortRelocs(), which sorts
entries by Offset.
Then override this function for Mips, to emit HI16 and GOT16 relocations
against the local symbol in pair with the corresponding LO16 relocation.
Patch by Vladimir Stefanovic.
Differential Revision: http://reviews.llvm.org/D7414
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234883 91177308-0d34-0410-b5e6-96231b3b80d8
TargetRegisterInfo::getRegPressureLimit has a note that it is an old
model that relies on manually entered classes. Using the newer model of
register pressure sets seems more appropriate. We might eventually even
switch to lib/CodeGen/RegisterPressure.cpp, but we should probably do
incremental changes here.
Using the newer model also makes it easier to take regmasks into account
which is necessary to fix llvm.org/PR23143. I am currently also
preparing a patch for that, but would like to do this switch
independently.
Review: http://reviews.llvm.org/D8986
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234880 91177308-0d34-0410-b5e6-96231b3b80d8
The testcase that is included in the patch caused a crash when doing DebugInfoFinder::processModule
on the module due to DCT->getElements() returning nullptr in DebugInfoFinder::processType.
By doing "DCT->getElements()" instead of "DCT->getElements()->operands()" one gets a DIArray
instead of a raw MDTuple. The former has code to handle null as a 0-element array and
therefore avoids the crash.
Differential Revision: http://reviews.llvm.org/D9008
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234875 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This transformation reassociates a n-ary add so that the add can partially reuse
existing instructions. For example, this pass can simplify
void foo(int a, int b) {
bar(a + b);
bar((a + 2) + b);
}
to
void foo(int a, int b) {
int t = a + b;
bar(t);
bar(t + 2);
}
saving one add instruction.
Fixes PR22357 (https://llvm.org/bugs/show_bug.cgi?id=22357).
Test Plan: nary-add.ll
Reviewers: broune, dberlin, hfinkel, meheff, sanjoy, atrick
Reviewed By: sanjoy, atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8950
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234855 91177308-0d34-0410-b5e6-96231b3b80d8
Change `DICompileUnit::replaceSubprograms()` and
`DICompileUnit::replaceGlobalVariables()` to match the `MDCompileUnit`
equivalents that they're wrapping.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234852 91177308-0d34-0410-b5e6-96231b3b80d8
Gut the `DIDescriptor` wrappers around `MDLocalScope` subclasses. Note
that `DILexicalBlock` wraps `MDLexicalBlockBase`, not `MDLexicalBlock`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234850 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Runtime unrolling of loops needs to emit an expression to compute the
loop's runtime trip-count. Avoid runtime unrolling if this computation
will be expensive.
Depends on D8993.
Reviewers: atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8994
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234846 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Teach `isHighCostExpansion` to consider divisions by power-of-two
constants as cheap and add a test case. This change is needed for a new
user of `isHighCostExpansion` that will be added in a subsequent change.
Depends on D8995.
Reviewers: atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8993
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234845 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Move isHighCostExpansion from IndVarSimplify to SCEVExpander. This
exposed function will be used in a subsequent change.
Reviewers: bogner, atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8995
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234844 91177308-0d34-0410-b5e6-96231b3b80d8
Gut all the non-pointer API from the variable wrappers, except an
implicit conversion from `DIGlobalVariable` to `DIDescriptor`. Note
that if you're updating out-of-tree code, `DIVariable` wraps
`MDLocalVariable` (`MDVariable` is a common base class shared with
`MDGlobalVariable`).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234840 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is the first in a series of patches to eventually add support for TLS relocations to RuntimeDyld. This patch resolves an issue in the current GOT handling, where GOT entries would be reused between object files, which leads to the same situation that necessitates the GOT in the first place, i.e. that the 32-bit offset can not cover all of the address space. Thus this patch makes the GOT object-file-local.
Unfortunately, this still isn't quite enough, because the MemoryManager does not yet guarantee that sections are allocated sufficiently close to each other, even if they belong to the same object file. To address this concern, this patch also adds a small API abstraction on top of the GOT allocation mechanism that will allow (temporarily, until the MemoryManager is improved) using the stub mechanism instead of allocating a different section. The actual switch from separate section to stub mechanism will be part of a follow-on commit, so that it can be easily reverted independently at the appropriate time.
Test Plan: Includes a test case where the GOT of two object files is artificially forced to be apart by several GB.
Reviewers: lhames
Reviewed By: lhames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8813
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234839 91177308-0d34-0410-b5e6-96231b3b80d8
I don't think this API is helping much. Change the callers to call
`MDType::isBlockByrefStruct()` directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234837 91177308-0d34-0410-b5e6-96231b3b80d8
Gut a couple more classes in the DIDescriptor hierarchy. Leave behind
an implicit conversion to `DIDescriptor`, the old base class.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234836 91177308-0d34-0410-b5e6-96231b3b80d8
This is along the same lines as r234832, but for `DILocation`. Clean
out all accessors from `DILocation`. Any callers should be using
`MDLocation` directly (e.g., via `operator->()`).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234835 91177308-0d34-0410-b5e6-96231b3b80d8
Fix oversight in -analyze output. PtrRtCheck contains the pointers that
need to be checked against each other and not whether memchecks are
necessary.
For instance in the testcase PtrRtCheck has four elements but all
no-alias so no checking is necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234833 91177308-0d34-0410-b5e6-96231b3b80d8
Completely gut `DIExpression`, turning it into a simple wrapper around
`MDExpression *`. There are two bits of magic left:
- It's constructed from `const MDExpression*` but convertible to
`MDExpression*`.
- It's default-constructed to `nullptr`.
Otherwise, it should behave quite like a raw pointer. Once I've done
the same to the rest of the `DIDescriptor` subclasses, I'll come back to
delete them entirely (and update call sites as necessary to deal with
the missing magic).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234832 91177308-0d34-0410-b5e6-96231b3b80d8
Before we had real liveness, we needed to track every value that base pointer
insertion code created because these now might be live. We now just rerun
the data flow liveness algorithm (which is actually faster!) and no longer
need the associated code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234827 91177308-0d34-0410-b5e6-96231b3b80d8
As documented in PR23200 (and the FIXMEs I've added to the code here),
this logic is fairly broken: it modifies the `LLVMContext` in a way that
affects other modules and cannot be serialized to assembly/bitcode. For
now, move it over to `MDLocation::computeNewDiscriminators()` anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234825 91177308-0d34-0410-b5e6-96231b3b80d8
I don't see a reason to add the `copyWithNewScope()` API over to
`MDLocation` -- it seems to be a holdover from when creating locations
required knowing details of operand layout -- so change
`AddDiscriminators` to call `MDLocation::get()` directly. Should be no
functionality change here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234824 91177308-0d34-0410-b5e6-96231b3b80d8
There's only one user of the various `DIObjCProperty::is*Property()`
accessors -- `DwarfUnit::constructTypeDIE()` -- and it's just using the
reverse logic to reconstruct the bitfield. Drop this API and simplify
the only caller.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234818 91177308-0d34-0410-b5e6-96231b3b80d8
Combine something like:
(v8i8 concat_vectors (v2i8 bitcast (i16)) x4)
into:
(v8i8 (bitcast (v4i16 BUILD_VECTOR (i16) x4)))
If any of the scalars are floating point, use that throughout.
Differential Revision: http://reviews.llvm.org/D8948
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234809 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of calling the somewhat confusingly-named
`DIVariable::isInlinedFnArgument()`, do the check directly here.
There's possibly a small functionality change here: instead of
`dyn_cast<>`'ing `DV->getScope()` to `MDSubprogram`, I'm looking up the
scope chain for the actual subprogram. I suspect that this is a no-op
for function arguments so in practise there isn't a real difference.
I've also added a `FIXME` to check the `inlinedAt:` chain instead, since
I wonder if that would be more reliable than the
`MDSubprogram::describes()` function.
Since this was the only user of `DIVariable::isInlinedFnArgument()`,
delete it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234799 91177308-0d34-0410-b5e6-96231b3b80d8
`DIGlobalVariable::getGlobal()` isn't really helpful, it just does a
`dyn_cast_or_null<>`. Simplify its only user by doing the cast directly
and delete the code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234796 91177308-0d34-0410-b5e6-96231b3b80d8
The only difference between the two is a `dyn_cast<>` to
`GlobalVariable`. If optimizations have left anything behind when a
global gets replaced, then it doesn't seem like the debug info is dead.
I can't seem to find an optimization that would leave behind a
non-`GlobalVariable` without nulling the reference entirely, so I
haven't added a testcase (but I'll be deleting `getGlobal()` in a future
commit).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234792 91177308-0d34-0410-b5e6-96231b3b80d8
Use early-return style that's preferred in LLVM and updating the naming in places I touched with other changes in the last few days. Hopefully, NFC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234785 91177308-0d34-0410-b5e6-96231b3b80d8
We use dummy calls to adjust the liveness of values over statepoints in the midst of the insertion. If there are no values which need held live, there's no point in actually inserting the holder.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234779 91177308-0d34-0410-b5e6-96231b3b80d8
I don't really like this function at all -- I think it should be as
simple as `return getFunction() == F` -- but for now this seems like the
best we can do.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234778 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r234717, reapplying r234698 (in spirit).
As described in r234717, the original `Verifier` check had a
use-after-free. Instead of storing pointers to "interesting" debug info
intrinsics whose bit piece expressions should be verified once we have
typerefs, do a second traversal. I've added a testcase to catch the
`llc` crasher.
Original commit message:
Verifier: Check for incompatible bit piece expressions
Convert an assertion into a `Verifier` check. Bit piece expressions
must fit inside the variable, and mustn't be the entire variable.
Catching this in the verifier will help us find bugs sooner, and makes
`DIVariable::getSizeInBits()` dead code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234776 91177308-0d34-0410-b5e6-96231b3b80d8
Since we're restructuring the CFG, we also need to make sure to update the analsis passes. While I'm touching the code, I dedicided to restructure it a bit. The code involved here was very confusing. This change moves the normalization to essentially being a pre-pass before the main insertion work and updates a few comments to actually say what is happening and *why*.
The restructuring should be covered by existing tests. I couldn't easily see how to create a test for the invalidation bug. Suggestions welcome.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234769 91177308-0d34-0410-b5e6-96231b3b80d8
Revert "Remove default in fully-covered switch (to fix Clang -Werror -Wcovered-switch-default)"
Revert "R600: Add carry and borrow instructions. Use them to implement UADDO/USUBO"
Revert "LegalizeDAG: Try to use Overflow operations when expanding ADD/SUB"
Using overflow operations fails CodeGen/Generic/2011-07-07-ScheduleDAGCrash.ll
on hexagon, nvptx, and r600. Revert while I investigate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234768 91177308-0d34-0410-b5e6-96231b3b80d8
This is related to the issues addressed in 234651. These assertions check the properties ensured by that change at the place of use. Note that a similiar property is checked in checkBasicSSA, but without the reachability constraint. Technically, the liveness would be correct to include unreachable values, but this would be problematic for actual relocation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234766 91177308-0d34-0410-b5e6-96231b3b80d8
The check in question is attempting to help find cases where we haven't relocated a pointer at a safepoint we should have. It does this by coercing the value to null at any safepoint which doesn't relocate it.
Unfortunately, this turns out to be rather expensive in terms of memory usage and time. The number of stores inserted can grow with O(number of values x number of statepoints). On at least one example I looked at, over half of peak memory usage was coming from this check.
With this change, the check is no longer enabled by default in Asserts builds. It is enabled for expensive asserts builds and has a command line option to enable it in both Asserts and non-Asserts builds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234761 91177308-0d34-0410-b5e6-96231b3b80d8
v2: tighten the sub64 tests
v3: rename to CARRY/BORROW
v4: fixup test cmdline
add known bits computation
use sign extend instead of sub 0,x
better add test
v5: remove redundant break
move lowering to separate functions
fix comments
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewers: arsenm
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234759 91177308-0d34-0410-b5e6-96231b3b80d8
Original message.
Have one raw_fd_ostream constructor forward to the other.
This fixes some odd behaviour differences between the two. In particular,
the version that takes a FD no longer unconditionally sets stdout to binary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234734 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r234698.
This caused a use-after-free: `QueuedBitPieceExpressions` holds onto
references to `DbgInfoIntrinsic`s and references them past where they're
deleted (this is because the verifier is run as a function pass, and
then `verifyTypeRefs()` is called during `doFinalization()`).
I'll include a reduced crasher for `llc` when I recommit the check.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234717 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When instruction bundling is enabled and the -mc-relax-all flag is
set, we can write bundle padding directly into fragments and avoid
creating large number of fragments significantly reducing LLVM MC
memory usage.
Test Plan: Regression test attached
Reviewers: eliben
Subscribers: jfb, mseaborn
Differential Revision: http://reviews.llvm.org/D8072
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234714 91177308-0d34-0410-b5e6-96231b3b80d8
When I fixed these a couple of days ago to iterate over all loops, not just
depth == 1 loops, I inadvertently made it such that we'd only look at the first
top-level loop. Make sure that we really look at all of them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234705 91177308-0d34-0410-b5e6-96231b3b80d8
Clean up a predicate I added in r229731, fix the relevant comment and
add a test case. The earlier version is confusing to read and was also
buggy (probably not a coincidence) till Alexey fixed it in r233881.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234701 91177308-0d34-0410-b5e6-96231b3b80d8
Change `MDSubprogram::getFunction()` and
`MDGlobalVariable::getConstant()` to return a `Constant`. Previously,
both returned `ConstantAsMetadata`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234699 91177308-0d34-0410-b5e6-96231b3b80d8
Convert an assertion into a `Verifier` check. Bit piece expressions
must fit inside the variable, and mustn't be the entire variable.
Catching this in the verifier will help us find bugs sooner, and makes
`DIVariable::getSizeInBits()` dead code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234698 91177308-0d34-0410-b5e6-96231b3b80d8
r234696 replaced the only use of `DIDescriptor::replaceAllUsesWith()`
with `DIBuilder::replaceTemporary()` (added in r234695). Delete the
dead code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234697 91177308-0d34-0410-b5e6-96231b3b80d8
Continue gutting the `DIDescriptor` hierarchy. In this case, move the
guts of `DIScope::getName()` and `DIScope::getContext()` to
`MDScope::getName()` and `MDScope::getScope()`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234691 91177308-0d34-0410-b5e6-96231b3b80d8
As it turns out, even though these are part of ISA 2.06, the P7 does not
support them (or, at least, not any P7s we're tested so far).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234686 91177308-0d34-0410-b5e6-96231b3b80d8
The patch is generated using clang-tidy misc-use-override check.
This command was used:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py \
-checks='-*,misc-use-override' -header-filter='llvm|clang' \
-j=32 -fix -format
http://reviews.llvm.org/D8925
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234679 91177308-0d34-0410-b5e6-96231b3b80d8
Rewrite `DILocation::atSameLineAs()` as `MDLocation::canDiscriminate()`
with a doxygen comment explaining its purpose. I've added a few FIXMEs
where I think this check is too weak; fixing that is tracked by PR23199.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234674 91177308-0d34-0410-b5e6-96231b3b80d8
Add forwarding `getFilename()` and `getDirectory()` accessors to nodes
in the new hierarchy that define a `getFile()`. Use that to
re-implement existing functionality in the `DIDescriptor` hierarchy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234671 91177308-0d34-0410-b5e6-96231b3b80d8
This pass had the same problem as the data-prefetching pass: it was only
checking for depth == 1 loops in practice. Fix that, add some debugging
statements, and make sure that, when we grab an AddRec, it is for the loop we
expect.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234670 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, there's a single flag, checked by the pass itself.
It can't force-enable the pass (and is on by default), because it
might not even have been created, as that's the targets decision.
Instead, have separate explicit flags, so that the decision is
consistently made in the target.
Keep the flag as a last-resort "force-disable GlobalMerge" for now,
for backwards compatibility.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234666 91177308-0d34-0410-b5e6-96231b3b80d8
The spilled registers are pristine and thus, correctly handled by
the register scavenger and so on, but the liveness information is
strictly speaking wrong at this point.
Fix that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234664 91177308-0d34-0410-b5e6-96231b3b80d8
This allows winehprepare to build sensible llvm.eh.actions calls for SEH
finally blocks. The pattern matching in this change is brittle and
should be replaced with something more robust soon. In the meantime,
this will let us write the code that produces __C_specific_handler xdata
tables, which we need regardless of how we decide to get finally blocks
through EH preparation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234663 91177308-0d34-0410-b5e6-96231b3b80d8
