The ABI specifies that <1 x i128> and <1 x fp128> are supposed to be
passed in vector registers. We do not yet support those types, and
some infrastructure is missing before we can do so.
In order to prevent accidentally generating code violating the ABI,
this patch adds checks to detect those types and error out if user
code attempts to use them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236526 91177308-0d34-0410-b5e6-96231b3b80d8
The ABI allows sub-128 vectors to be passed and returned in registers,
with the vector occupying the upper part of a register. We therefore
want to legalize those types by widening the vector rather than promoting
the elements.
The patch includes some simple tests for sub-128 vectors and also tests
that we can recognize various pack sequences, some of which use sub-128
vectors as temporary results. One of these forms is based on the pack
sequences generated by llvmpipe when no intrinsics are used.
Signed unpacks are recognized as BUILD_VECTORs whose elements are
individually sign-extended. Unsigned unpacks can have the equivalent
form with zero extension, but they also occur as shuffles in which some
elements are zero.
Based on a patch by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236525 91177308-0d34-0410-b5e6-96231b3b80d8
The z13 vector facility includes some instructions that operate only on the
high f64 in a v2f64, effectively extending the FP register set from 16
to 32 registers. It's still better to use the old instructions if the
operands happen to fit though, since the older instructions have a shorter
encoding.
Based on a patch by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236524 91177308-0d34-0410-b5e6-96231b3b80d8
The architecture doesn't really have any native v4f32 operations except
v4f32->v2f64 and v2f64->v4f32 conversions, with only half of the v4f32
elements being used. Even so, using vector registers for <4 x float>
and scalarising individual operations is much better than generating
completely scalar code, since there's much less register pressure.
It's also more efficient to do v4f32 comparisons by extending to 2
v2f64s, comparing those, then packing the result.
This particularly helps with llvmpipe.
Based on a patch by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236523 91177308-0d34-0410-b5e6-96231b3b80d8
This adds ABI and CodeGen support for the v2f64 type, which is natively
supported by z13 instructions.
Based on a patch by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236522 91177308-0d34-0410-b5e6-96231b3b80d8
This the first of a series of patches to add CodeGen support exploiting
the instructions of the z13 vector facility. This patch adds support
for the native integer vector types (v16i8, v8i16, v4i32, v2i64).
When the vector facility is present, we default to the new vector ABI.
This is characterized by two major differences:
- Vector types are passed/returned in vector registers
(except for unnamed arguments of a variable-argument list function).
- Vector types are at most 8-byte aligned.
The reason for the choice of 8-byte vector alignment is that the hardware
is able to efficiently load vectors at 8-byte alignment, and the ABI only
guarantees 8-byte alignment of the stack pointer, so requiring any higher
alignment for vectors would require dynamic stack re-alignment code.
However, for compatibility with old code that may use vector types, when
*not* using the vector facility, the old alignment rules (vector types
are naturally aligned) remain in use.
These alignment rules are not only implemented at the C language level
(implemented in clang), but also at the LLVM IR level. This is done
by selecting a different DataLayout string depending on whether the
vector ABI is in effect or not.
Based on a patch by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236521 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for the z13 processor type and its vector facility,
and adds MC support for all new instructions provided by that facilily.
Apart from defining the new instructions, the main changes are:
- Adding VR128, VR64 and VR32 register classes.
- Making FP64 a subclass of VR64 and FP32 a subclass of VR32.
- Adding a D(V,B) addressing mode for scatter/gather operations
- Adding 1-, 2-, and 3-bit immediate operands for some 4-bit fields.
Until now all immediate operands have been the same width as the
underlying field (hence the assert->return change in decode[SU]ImmOperand).
In addition, sys::getHostCPUName is extended to detect running natively
on a z13 machine.
Based on a patch by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236520 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 963cdbccf6e5578822836fd9b2ebece0ba9a60b7 (ie r236514)
This is to get the bots green while i investigate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236518 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit b27413cbfd78d959c18e713bfa271fb69e6b3303 (ie r236515).
This is to get the bots green while i investigate the failures.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236517 91177308-0d34-0410-b5e6-96231b3b80d8
A regmask (typically seen on a call) clobbers the set of registers it lists. The IfConverter, in UpdatePredRedefs, was handling register defs, but not regmasks.
These are slightly different to a def in that we need to add both an implicit use and def to appease the machine verifier. Otherwise, uses after the if converted call could think they are reading an undefined register.
Reviewed by Matthias Braun and Quentin Colombet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236515 91177308-0d34-0410-b5e6-96231b3b80d8
The code was basically the same here already. Just added an out parameter for a vector of seen defs so that UpdatePredRedefs can call StepForward first, then do its own post processing on the seen defs.
Will be used in the next commit to also handle regmasks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236514 91177308-0d34-0410-b5e6-96231b3b80d8
It got this in some cases (if one of them was an identified object), but not in all cases.
This caused stores to undef to block load-forwarding in some cases, etc.
Added test to Transforms/GVN to verify optimization occurs as expected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236511 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r236360.
This change exposed a bug in WinEHPrepare by opting win32 code into EH
preparation. We already knew that WinEHPrepare has bugs, and is the
status quo for x64, so I don't think that's a reason to hold off on this
change. I disabled exceptions in the sanitizer tests in r236505 and an
earlier revision.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236508 91177308-0d34-0410-b5e6-96231b3b80d8
This patch introduces a new pass that computes the safe point to insert the
prologue and epilogue of the function.
The interest is to find safe points that are cheaper than the entry and exits
blocks.
As an example and to avoid regressions to be introduce, this patch also
implements the required bits to enable the shrink-wrapping pass for AArch64.
** Context **
Currently we insert the prologue and epilogue of the method/function in the
entry and exits blocks. Although this is correct, we can do a better job when
those are not immediately required and insert them at less frequently executed
places.
The job of the shrink-wrapping pass is to identify such places.
** Motivating example **
Let us consider the following function that perform a call only in one branch of
a if:
define i32 @f(i32 %a, i32 %b) {
%tmp = alloca i32, align 4
%tmp2 = icmp slt i32 %a, %b
br i1 %tmp2, label %true, label %false
true:
store i32 %a, i32* %tmp, align 4
%tmp4 = call i32 @doSomething(i32 0, i32* %tmp)
br label %false
false:
%tmp.0 = phi i32 [ %tmp4, %true ], [ %a, %0 ]
ret i32 %tmp.0
}
On AArch64 this code generates (removing the cfi directives to ease
readabilities):
_f: ; @f
; BB#0:
stp x29, x30, [sp, #-16]!
mov x29, sp
sub sp, sp, #16 ; =16
cmp w0, w1
b.ge LBB0_2
; BB#1: ; %true
stur w0, [x29, #-4]
sub x1, x29, #4 ; =4
mov w0, wzr
bl _doSomething
LBB0_2: ; %false
mov sp, x29
ldp x29, x30, [sp], #16
ret
With shrink-wrapping we could generate:
_f: ; @f
; BB#0:
cmp w0, w1
b.ge LBB0_2
; BB#1: ; %true
stp x29, x30, [sp, #-16]!
mov x29, sp
sub sp, sp, #16 ; =16
stur w0, [x29, #-4]
sub x1, x29, #4 ; =4
mov w0, wzr
bl _doSomething
add sp, x29, #16 ; =16
ldp x29, x30, [sp], #16
LBB0_2: ; %false
ret
Therefore, we would pay the overhead of setting up/destroying the frame only if
we actually do the call.
** Proposed Solution **
This patch introduces a new machine pass that perform the shrink-wrapping
analysis (See the comments at the beginning of ShrinkWrap.cpp for more details).
It then stores the safe save and restore point into the MachineFrameInfo
attached to the MachineFunction.
This information is then used by the PrologEpilogInserter (PEI) to place the
related code at the right place. This pass runs right before the PEI.
Unlike the original paper of Chow from PLDI’88, this implementation of
shrink-wrapping does not use expensive data-flow analysis and does not need hack
to properly avoid frequently executed point. Instead, it relies on dominance and
loop properties.
The pass is off by default and each target can opt-in by setting the
EnableShrinkWrap boolean to true in their derived class of TargetPassConfig.
This setting can also be overwritten on the command line by using
-enable-shrink-wrap.
Before you try out the pass for your target, make sure you properly fix your
emitProlog/emitEpilog/adjustForXXX method to cope with basic blocks that are not
necessarily the entry block.
** Design Decisions **
1. ShrinkWrap is its own pass right now. It could frankly be merged into PEI but
for debugging and clarity I thought it was best to have its own file.
2. Right now, we only support one save point and one restore point. At some
point we can expand this to several save point and restore point, the impacted
component would then be:
- The pass itself: New algorithm needed.
- MachineFrameInfo: Hold a list or set of Save/Restore point instead of one
pointer.
- PEI: Should loop over the save point and restore point.
Anyhow, at least for this first iteration, I do not believe this is interesting
to support the complex cases. We should revisit that when we motivating
examples.
Differential Revision: http://reviews.llvm.org/D9210
<rdar://problem/3201744>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236507 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When using the N64 ABI, element-indices use the i64 type instead of i32.
In many cases, we can use iPTR to account for this but additional patterns
and pseudo's are also required.
This fixes most (but not quite all) failures in the test-suite when using
N64 and MSA together.
Reviewers: vkalintiris
Reviewed By: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9342
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236494 91177308-0d34-0410-b5e6-96231b3b80d8
When forming an IT block from the first MOV here:
%R2<def> = t2MOVr %R0, pred:1, pred:%CPSR, opt:%noreg
%R3<def> = tMOVr %R0<kill>, pred:14, pred:%noreg
the move in to R3 is moved out of the IT block so that later instructions on the same predicate can be inside this block, and we can share the IT instruction.
However, when moving the R3 copy out of the IT block, we need to clear its kill flags for anything in use at this point in time, ie, R0 here.
This appeases the machine verifier which thought that R0 wasn't defined when used.
I have a test case, but its extremely register allocator specific. It would be too fragile to commit a test which depends on the register allocator here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236468 91177308-0d34-0410-b5e6-96231b3b80d8
and avoid cloning unused decls into every partition.
Module partitioning showed up as a source of significant overhead when I
profiled some trivial test cases. Avoiding the overhead of partitionging
for uncalled functions helps to mitigate this.
This change also means that it is no longer necessary to have a
LazyEmittingLayer underneath the CompileOnDemand layer, since the
CompileOnDemandLayer will not extract or emit function bodies until they are
called.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236465 91177308-0d34-0410-b5e6-96231b3b80d8
When deciding whether a value comes from the aggregate or inserted value of an
insertvalue instruction, we compare the indices against those of the location
we're interested in. One of the lists needs reversing because the input data is
backwards (so that modifications take place at the end of the SmallVector), but
we were reversing both before leading to incorrect results.
Should fix PR23408
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236457 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The object format can be set to something other than MachO, e.g.
to use ELF-on-Darwin for MCJIT. This already works on Windows, so
there's no reason it shouldn't on Darwin.
Reviewers: lhames, grosbach
Subscribers: rafael, grosbach, t.p.northover, llvm-commits
Differential Revision: http://reviews.llvm.org/D6185
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236455 91177308-0d34-0410-b5e6-96231b3b80d8
A joined option always needs to have an argument, even if it's an empty one.
Clang would previously assert when trying to use --extra-warnings, which is
a flag alias for -W, which is a joined option.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236434 91177308-0d34-0410-b5e6-96231b3b80d8
At the moment, all subregs defined by the SystemZ target can be modified
independently of the wider register. E.g. writing to a GR32 does not
change the upper 32 bits of the GR64. Writing to an FP32 does not change
the lower 32 bits of the FP64.
Hoewver, the upcoming support for the vector extension redefines FP64 as
one half of a V128. Floating-point operations leave the other half of
a V128 in an unpredictable state, so it's no longer the case that writing
to an FP32 leaves the bits of the underlying register (the V128) alone.
I'd prefer to have separate subreg_ names for this situation, so that
it's obvious at a glance whether we're talking about a subreg that leaves
the other parts of the register alone.
No behavioral change intended.
Patch originally by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236433 91177308-0d34-0410-b5e6-96231b3b80d8
We know what MemoryKind an operand has at the time we construct it,
so we might as well just record it in an unused part of the structure.
This makes it easier to add scatter/gather addresses later.
No behavioral change intended.
Patch originally by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236432 91177308-0d34-0410-b5e6-96231b3b80d8
It seems SystemZTargetLowering::getTargetNodeName got out of sync with
some recent changes to the SystemZISD opcode list. Add back all the
missing opcodes (and re-sort to the same order as SystemISelLowering.h).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236430 91177308-0d34-0410-b5e6-96231b3b80d8
ScheduleDAGInstrs wasn't setting or clearing the kill flags on instructions inside bundles. This led to code such as this
%R3<def> = t2ANDrr %R0
BUNDLE %ITSTATE<imp-def,dead>, %R0<imp-use,kill>
t2IT 1, 24, %ITSTATE<imp-def>
R6<def,tied6> = t2ORRrr %R0<kill>, ...
being transformed to
BUNDLE %ITSTATE<imp-def,dead>, %R0<imp-use>
t2IT 1, 24, %ITSTATE<imp-def>
R6<def,tied6> = t2ORRrr %R0<kill>, ...
%R3<def> = t2ANDrr %R0<kill>
where the kill flag was removed from the BUNDLE instruction, but not the t2ORRrr inside it. The verifier then thought that
R0 was undefined when read by the AND.
This change make the toggleKillFlags method also check for bundles and toggle flags on bundled instructions.
Setting the kill flag is special cased as we only want to set the kill flag on the last instruction in the bundle.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236428 91177308-0d34-0410-b5e6-96231b3b80d8
Fixed some bugs in extend/truncate for AVX-512 target.
Removed VBROADCASTM (masked broadcast) node, since it is not used any more.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236420 91177308-0d34-0410-b5e6-96231b3b80d8
After r210687, windows_error does nothing but call mapWindowsError.
Other Windows/*.inc files directly call mapWindowsError. This patch
updates Path.inc and Process.inc to do the same.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236409 91177308-0d34-0410-b5e6-96231b3b80d8
Removed code that was replicating v8i16 'shift + mask' implementation that is done more nicely by making use of LowerScalarImmediateShift
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236388 91177308-0d34-0410-b5e6-96231b3b80d8
Seems we were setting the base address on the wrong DwarfCompileUnit
object so it wasn't being used when generating the ranges.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236377 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds the --load-address command line option to
llvm-pdbdump, which dumps all addresses assuming the module has
loaded at the specified address.
Additionally, this patch adds an option to llvm-pdbdump to support
dumping of public symbols (i.e. symbols with external linkage).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236342 91177308-0d34-0410-b5e6-96231b3b80d8
This reapplies r235060 and 235070, which were reverted because of test failures
in LLDB. The failure was caused because at moment RuntimeDyld is processing
relocations for all sections, irrespective of whether we actually load them
into memory or not, but RuntimeDyld was not actually remembering where in memory
the unrelocated section is. This commit includes a fix for that issue by
remembering that pointer, though the longer term fix should be to stop processing
unneeded sections.
Original Summary:
This allows us to get rid of the original unrelocated object file after
we're done processing relocations (but before applying them).
MachO and COFF already do not require this (currently we have temporary hacks
to prevent ownership from being released, but those are brittle and should be
removed soon).
The placeholder mechanism allowed the relocation resolver to look at original
object file to obtain more information that are required to apply the
relocations. This is usually necessary in two cases:
- For relocations targetting sub-word memory locations, there may be pieces
of the instruction at the target address which we should not override.
- Some relocations on some platforms allow an extra addend to be encoded in
their immediate fields.
The problem is that in the second case the information cannot be recovered
after the relocations have been applied once because they will have been
overridden. In the first case we also need to be careful to not use any bits
that aren't fixed and may have been overriden by applying a first relocation.
In the past both have been fixed by just looking at original object file. This
patch attempts to recover the information from the first by looking at the
relocated object file, while the extra addend in the second case is read
upon relocation processing and addend to the regular addend.
I have tested this on X86. Other platforms represent my best understanding
of how those relocations should work, but I may have missed something because
I do not have access to those platforms.
We will keep the ugly workarounds in place for a couple of days, so this commit
can be reverted if it breaks the bots.
Differential Revision: http://reviews.llvm.org/D9028
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236341 91177308-0d34-0410-b5e6-96231b3b80d8
This pass is responsible for constructing the EH registration object
that gets linked into fs:00, which is all it does in this change. In the
future, it will also insert stores to update the EH state number.
I considered keeping this functionality in WinEHPrepare, but it's pretty
separable and X86 specific. It has conceptually very little to do with
the task of WinEHPrepare, which is currently outlining. WinEHPrepare is
also in theory useful on ARM, but this logic is pretty x86 specific.
Reviewers: andrew.w.kaylor, majnemer
Differential Revision: http://reviews.llvm.org/D9422
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236339 91177308-0d34-0410-b5e6-96231b3b80d8
Converting from t2LDRs to tLDRr caused the shift argument to drop the internal flag. This would then throw machine verifier errors.
Unfortunately i'm having trouble reducing a test case. I'm going to keep trying, but so far its a scary combination of machine sinking, an 'and i1', loads feeding loads, and a bunch of code which shouldn't change IT block formation, but does. Its not useful to commit a test in that state as we have no way of knowing if it even hits this code reliably in future.
rdar://problem/20752113
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236333 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes a bug where the YAML Output class emitted
a sequence of flow sequences without the '-' characters.
Before:
seq:
[ a, b ]
[ c, d ]
After:
seq:
- [ a, b ]
- [ c, d ]
Reviewers: Justin Bogner
Differential Revision: http://reviews.llvm.org/D9206
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236329 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
LI should never accept immediates larger than 32 bits.
The additional Is32BitImm boolean also paves the way for unifying the functionality that LA and LI have in common.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9289
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236313 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Generate one DSLL32 of 0 instead of two consecutive DSLL of 16.
In order to do this I had to change createLShiftOri's template argument from a bool to an unsigned.
This also gave me the opportunity to rewrite the mips64-expansions.s test, as it was testing the same cases multiple times and skipping over other cases.
It was also somewhat unreadable, as the CHECK lines were grouped in a huge block of text at the beginning of the file.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8974
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236311 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes issues with vector constant folding not correctly handling scalar input operands if they require implicit truncation - this was tested with llvm-stress as recommended by Patrik H Hagglund.
The patch ensures that integer input scalars from a build vector are correctly truncated before folding, and that constant integer scalar results are promoted to a legal type before inclusion in the new folded build vector.
I have added another crash test case and also a test for UINT_TO_FP / SINT_TO_FP using an non-truncated scalar input, which was failing before this patch.
Differential Revision: http://reviews.llvm.org/D9282
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236308 91177308-0d34-0410-b5e6-96231b3b80d8
This pass was generating 'Instruction does not dominate all uses!'
errors for programs which had loops with a condition variable that
depended on the result of a phi instruction from outside of the loop.
The pass was inserting new phi nodes outside of the loop which used values
defined inside the loop.
http://bugs.freedesktop.org/show_bug.cgi?id=90056
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236306 91177308-0d34-0410-b5e6-96231b3b80d8
If we move an instruction from one block down to a MOVC and predicate it,
then the original instruction could be moved in to a loop. In this case,
its invalid for any kill flags to remain on there.
Fails with -verfy-machineinstrs.
rdar://problem/20752113
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236290 91177308-0d34-0410-b5e6-96231b3b80d8
This change is the second of 3 patches to add support for specifying
the profile output from the command line via -fprofile-instr-generate=<path>,
where the specified output path/file will be overridden by the
LLVM_PROFILE_FILE environment variable.
This patch adds the necessary support to the llvm instrumenter, specifically
a new member of GCOVOptions for clang to save the specified filename, and
support for calling the new compiler-rt interface from __llvm_profile_init.
Patch by Teresa Johnson. Thanks!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236288 91177308-0d34-0410-b5e6-96231b3b80d8
When commuting a thumb instruction in the size reduction pass, thumb
instructions are represented as a bundle and so some operands may be marked
as internal. The internal flag has to move with the operand when commuting.
This test is sensitive to register allocation so can't specifically check that
this error was happening, but so long as it continues to pass with -verify then
hopefully its still ok.
rdar://problem/20752113
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236282 91177308-0d34-0410-b5e6-96231b3b80d8
The expansion for t2ABS was always setting the kill flag on the rsb instruction.
It should instead only be set on rsb if it was set on the original ABS instruction.
rdar://problem/20752113
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236272 91177308-0d34-0410-b5e6-96231b3b80d8
This helps reduce the frequency of stack realignment prologues in 32-bit
X86 Windows code. Before this change and the corresponding clang change,
we would take the max of the type preferred alignment and the explicit
alignment on the alloca.
If you don't override aggregate alignment in datalayout, you get a
default of 8. This dates back to 2007 / r34356, and changing it seems
prohibitively difficult at this point.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236270 91177308-0d34-0410-b5e6-96231b3b80d8
When optimizing demanded bits of the operands of an Add we have to
remove the nsw/nuw flags as we have no guarantee anymore that we don't
wrap. This is legal here because the top bit is not demanded. In fact
this operaion was already performed but missed in the case of an Add
with a constant on the right side. To fix this this patch refactors the
code to unify the code paths in SimplifyDemandedUseBits() handling of
Add/Sub:
- The transformation of Add->Or is removed from the simplify demand
code because the equivalent transformation exists in
InstCombiner::visitAdd()
- KnownOnes/KnownZero are not adjusted for Add x, C anymore as
computeKnownBits() already performs these computations.
- The simplification of the operands is unified. In this new version
constant on the right side of a Sub are shrunk now as I could not find
a reason why not to do so.
- The special case for clearing nsw/nuw in ShrinkDemandedConstant() is
not necessary anymore as the caller does that already.
Differential Revision: http://reviews.llvm.org/D9415
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236269 91177308-0d34-0410-b5e6-96231b3b80d8
The rule that turns a sub to xor if the LHS is 2^n-1 and the remaining bits
are known zero, does not use the demanded bits at all: Move it to the
normal InstCombine code path.
Differential Revision: http://reviews.llvm.org/D9417
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236268 91177308-0d34-0410-b5e6-96231b3b80d8
This is actually fairly simple in the current code layout: Check if we should
compress just before writing out and everything else just works.
This removes the last case in which the object writer was creating a
fragment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236267 91177308-0d34-0410-b5e6-96231b3b80d8
Revision 220239 exposed a latent bug in method
'TargetInstrInfo::commuteInstruction'. When commuting the operands of a machine
instruction, method 'commuteInstruction' didn't correctly propagate the
'IsUndef' flag to the register operands of the new (commuted) instruction.
Before this patch, the following instruction:
%vreg4<def> = VADDSDrr %vreg14, %vreg5<undef>; FR64:%vreg4,%vreg14,%vreg5
was wrongly converted by method 'commuteInstruction' into:
%vreg4<def> = VADDSDrr %vreg5, %vreg14<undef>; FR64:%vreg4,%vreg5,%vreg14
The correct instruction should have been:
%vreg4<def> = VADDSDrr %vreg5<undef>, %vreg14; FR64:%vreg4,%vreg5,%vreg14
This patch fixes the problem in method 'TargetInstrInfo::commuteInstruction'.
When swapping the operands of a machine instruction, we now make sure that
'IsUndef' flags are correctly set.
Added test case 'pr23103.ll'.
Differential Revision: http://reviews.llvm.org/D9406
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236258 91177308-0d34-0410-b5e6-96231b3b80d8
If you somehow added a MachineOperand to an instruction
that did not have the parent set, the verifier would
crash since it attempts to use the operand's parent.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236249 91177308-0d34-0410-b5e6-96231b3b80d8
In the test case here, the 'unreachable' BB was removed by BranchFolding because its empty.
It then rewrote the jump from 'entry' to jump to its fallthrough, which was a landing pad.
This results in 'entry' jumping to 2 different landing pads, which fails the machine verifier.
rdar://problem/20750162
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236248 91177308-0d34-0410-b5e6-96231b3b80d8
temporary.
Because of that:
1. The machine verifier was complaining on such code.
2. The generate code worked just because the thumb reduction size pass fixed the
opcode.
rdar://problem/20749824
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236247 91177308-0d34-0410-b5e6-96231b3b80d8
Unlike 32-bit ARM, AArch64 can use wzr/xzr to implement this without the need
for a separate instruction.
rdar://18679590
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236245 91177308-0d34-0410-b5e6-96231b3b80d8
changes:
Don't apply on hexagon and NVPTX since they no longer claim to support UADDO/USUBO
Add location to getConstant
Drop comment about the ops being turned into expand
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236240 91177308-0d34-0410-b5e6-96231b3b80d8
During ELF writing, there is no need to further relax the sections, so we
should not be creating fragments. This patch avoids doing so in all cases
but debug section compression (that is next).
Also, the ELF format is fairly simple to write. We can do a single pass over
the sections to write them out and compute the section header table.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236235 91177308-0d34-0410-b5e6-96231b3b80d8
Sign extension of i8 to i16 was placing the unpacked bytes in the lower byte instead of the upper byte.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236209 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Optimizing these well are especially interesting for IRCE since it
"clamps" values by generating this sort of pattern through SCEV
expressions.
Depends on D9352.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9353
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236203 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
After this change `MatchSelectPattern` recognizes the following form
of SMIN:
Y >s C ? ~Y : ~C == ~Y <s ~C ? ~Y : ~C = SMIN(~Y, ~C)
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9352
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236202 91177308-0d34-0410-b5e6-96231b3b80d8
At the least it should be guarded by some kind of target hook.
It also introduced catastrophic compile time and code quality
regressions on some out of tree targets (test case still being
reduced/sanitized).
Sanjay agreed with reverting this patch until these issues can be
resolved.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236199 91177308-0d34-0410-b5e6-96231b3b80d8
This will cause hot nodes to appear closer to the root.
The literature says building the tree like this makes it a near-optimal (in
terms of search time given key frequencies) binary search tree. In LLVM's case,
we can do up to 3 comparisons in each leaf node, so it might be better to opt
for lower tree height in some cases; that's something to look into in the
future.
Differential Revision: http://reviews.llvm.org/D9318
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236192 91177308-0d34-0410-b5e6-96231b3b80d8
This was breaking sqlite with the machine verifier because operand 0 was a def according to tablegen, but didn't have the 'isDef' flag set.
Looking at the ISA, its clear that this operand is a source as writing to st(0) is implicit. So move the operand to the correct place in the td file.
rdar://problem/20751584
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236183 91177308-0d34-0410-b5e6-96231b3b80d8
32-bit x86 MSVC-style exceptions are functionaly similar to 64-bit, but
they take no arguments. Instead, they implicitly use the value of EBP
passed in by the caller as a pointer to the parent's frame. In LLVM, we
can represent this as llvm.frameaddress(1), and feed that into all of
our calls to llvm.framerecover.
The next steps are:
- Add an alloca to the fs:00 linked list of handlers
- Add something like llvm.sjlj.lsda or generalize it to store in the
alloca
- Move state number calculation to WinEHPrepare, arrange for
FunctionLoweringInfo to call it
- Use the state numbers to insert explicit loads and stores in the IR
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236172 91177308-0d34-0410-b5e6-96231b3b80d8
Many of the callers already have the pointer type anyway, and for the
couple of callers that don't it's pretty easy to call PointerType::get
on the pointee type and address space.
This avoids LLParser from using PointerType::getElementType when parsing
GlobalAliases from IR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236160 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of accumulating the content in a fragment first, just write it
to the output stream.
Also put it first in the section table, so that we never have to worry
about its index being >= SHN_LORESERVE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236145 91177308-0d34-0410-b5e6-96231b3b80d8
There's probably no way to test BXJ, but if the compiler ever did emit it
during CodeGen it would have to be a block terminator so "isBranch" is
appropriate.
BLX is more tricky. Clearly a call, but it affects surprisingly little.
rdar://18719544
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236140 91177308-0d34-0410-b5e6-96231b3b80d8
The clang frontend helps out GDB by emitting the members of local anonymous
unions as artificial local variables with shared storage. When SROA splits
the storage for artificial local variables that are smaller than the entire
union, the overhang piece will be outside of the allotted space for the
variable and this check fails.
rdar://problem/20730771
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236124 91177308-0d34-0410-b5e6-96231b3b80d8
x86 Windows uses the '_' prefix for all global symbols, and this was
mistakenly being applied to frameescape labels, which are not externally
visible global symbols. They use the private global prefix 'L'.
The *right* way to fix this is probably to stop masquerading this label
as an ExternalSymbol and create a new SDNode type. These labels are not
"external", and we know they will be resolved by assembly time. Having a
custom SDNode type would allow us to do better X86 address mode
matching, so it's probably worth doing eventually.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236123 91177308-0d34-0410-b5e6-96231b3b80d8
Finish off PR23080 by renaming the debug info IR constructs from `MD*`
to `DI*`. The last of the `DIDescriptor` classes were deleted in
r235356, and the last of the related typedefs removed in r235413, so
this has all baked for about a week.
Note: If you have out-of-tree code (like a frontend), I recommend that
you get everything compiling and tests passing with the *previous*
commit before updating to this one. It'll be easier to keep track of
what code is using the `DIDescriptor` hierarchy and what you've already
updated, and I think you're extremely unlikely to insert bugs. YMMV of
course.
Back to *this* commit: I did this using the rename-md-di-nodes.sh
upgrade script I've attached to PR23080 (both code and testcases) and
filtered through clang-format-diff.py. I edited the tests for
test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns
were off-by-three. It should work on your out-of-tree testcases (and
code, if you've followed the advice in the previous paragraph).
Some of the tests are in badly named files now (e.g.,
test/Assembler/invalid-mdcompositetype-missing-tag.ll should be
'dicompositetype'); I'll come back and move the files in a follow-up
commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236120 91177308-0d34-0410-b5e6-96231b3b80d8
Reg+%g0 is preferred to Reg+imm0 by the manual, and is what GCC produces.
Futhermore, reg+imm is invalid for the (not yet supported) "alternate
address space" instructions.
Differential Revision: http://reviews.llvm.org/D8753
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236107 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The existing code was correct for 32-bit GPR's but not 64-bit GPR's. It now
accounts for both cases.
Reviewers: vkalintiris
Reviewed By: vkalintiris
Subscribers: llvm-commits, mohit.bhakkad, sagar
Differential Revision: http://reviews.llvm.org/D9337
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236099 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Do the assemble-time shifts from createLShiftOri at the source, which groups all the shifting together, closer to the main logic path, and
store the results in concisely-named variables to improve code clarity.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8973
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236096 91177308-0d34-0410-b5e6-96231b3b80d8
We were trying to look through COPY instructions, but only to the next
instruction in a BB and incorrectly anyway. The cases where that would actually
be a good idea are rare enough (and not even tested!) that it's not worth
trying to get right.
rdar://20721342
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236050 91177308-0d34-0410-b5e6-96231b3b80d8
This is a compromise: with this simple patch, we should always handle a chain of exactly 3
operations optimally, but we're not generating the optimal balanced binary tree for a longer
sequence.
In general, this transform will reduce the dependency chain for a sequence of instructions
using N operands from a worst case N-1 dependent operations to N/2 dependent operations.
The optimal balanced binary tree would reduce the chain to log2(N).
The trade-off for not dealing with longer sequences is: (1) we have less complexity in the
compiler, (2) we avoid unknown compile-time blowup calculating a balanced tree, and (3) we
don't need to worry about the increased register pressure required to parallelize longer
sequences. It also seems unlikely that we would ever encounter really long strings of
dependent ops like that in the wild, but I'm not sure how to verify that speculation.
FWIW, I see no perf difference for test-suite running on btver2 (x86-64) with -ffast-math
and this patch.
We can extend this patch to cover other associative operations such as fmul, fmax, fmin,
integer add, integer mul.
This is a partial fix for:
https://llvm.org/bugs/show_bug.cgi?id=17305
and if extended:
https://llvm.org/bugs/show_bug.cgi?id=21768https://llvm.org/bugs/show_bug.cgi?id=23116
The issue also came up in:
http://reviews.llvm.org/D8941
Differential Revision: http://reviews.llvm.org/D9232
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236031 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
We don't seem to need to assert here, since this function's callers expect
to get a nullptr on error. This way we don't assert on user input.
Bug found with AFL fuzz.
Reviewers: rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9308
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236027 91177308-0d34-0410-b5e6-96231b3b80d8
We don't need codegen-only intrinsic instructions for the vector forms of these instructions.
This makes the reciprocal estimate instruction lowering identical to how we handle normal
square roots: (V)SQRTPS / (V)SQRTPD.
No existing regression tests fail with this patch.
Differential Revision: http://reviews.llvm.org/D9301
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236013 91177308-0d34-0410-b5e6-96231b3b80d8
llc converts all feature strings to lower case, while the LLVM C API
does not, so we need a lower case alias in order to test this with llc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236003 91177308-0d34-0410-b5e6-96231b3b80d8
We need to track if an AddrSpaceCast expression was seen when
generating an MCExpr for a ConstantExpr. This change introduces a
custom lowerConstant method to the NVPTX asm printer that will create
NVPTXGenericMCSymbolRefExpr nodes at the appropriate places to encode
the information that a given symbol needs to be casted to a generic
address.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236000 91177308-0d34-0410-b5e6-96231b3b80d8
This is a preliminary step to using the IR-level floating-point fast-math-flags in the SDAG (D8900).
In this patch, we introduce the optimization flags as their own struct. As noted in the TODO comment,
we should eventually share this data between the IR passes and the backend.
We also switch the existing nsw / nuw / exact bit functionality of the BinaryWithFlagsSDNode class to
use the new struct.
The tradeoff is that instead of using the free but limited space of SDNode's SubclassData, we add a
data member to the subclass. This means we don't have to repeat all of the get/set methods per flag,
but we're potentially adding size to all nodes of this subclassi type.
In practice on 64-bit systems (measured on Linux and MacOS X), there is no size difference between an
SDNode and BinaryWithFlagsSDNode after this change: they're both 80 bytes. This means that we had at
least one free byte to play with due to struct alignment.
Differential Revision: http://reviews.llvm.org/D9325
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235997 91177308-0d34-0410-b5e6-96231b3b80d8
[DebugInfo] Add debug locations to constant SD nodes
This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235989 91177308-0d34-0410-b5e6-96231b3b80d8
This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235977 91177308-0d34-0410-b5e6-96231b3b80d8
As a space optimization, this instruction would just encode the pointer
type of the first operand and use the knowledge that the second and
third operands would be of the pointee type of the first. When typed
pointers go away, this assumption will no longer be available - so
encode the type of the second operand explicitly and rely on that for
the third.
Test case added to demonstrate the backwards compatibility concern,
which only comes up when the definition of the second operand comes
after the use (hence the weird basic block sequence) - at which point
the type needs to be explicitly encoded in the bitcode and the record
length changes to accommodate this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235966 91177308-0d34-0410-b5e6-96231b3b80d8
This matches other assemblers and is less unexpected (e.g. PR23227).
On ELF, I tried binutils gas v2.24 and nasm 2.10.09, and they both
agree on LShr. On COFF, I couldn't get my hands on an assembler yet,
so don't change the behavior. For now, don't change it on non-AArch64
Darwin either, as the other assembler is gas v1.38, which does an AShr.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235963 91177308-0d34-0410-b5e6-96231b3b80d8
Support up to 2^16 arguments to a function. If we do hit the limit,
assert out rather than restarting at 0 as we've done historically.
This fixes PR23332. A clang test will follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235955 91177308-0d34-0410-b5e6-96231b3b80d8
Defaulting to AShr without consulting the target MCAsmInfo isn't OK.
Add a flag to fix that. Keep it off for now: target migrations will
follow in separate commits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235951 91177308-0d34-0410-b5e6-96231b3b80d8
I previously thought switch clusters would need to use uint64_t in case
the weights of multiple cases overflowed a 32-bit int. It turns
out that the weights on a terminator instruction are capped to allow for
being added together, so using a uint32_t should be safe.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235945 91177308-0d34-0410-b5e6-96231b3b80d8
Reverse libLTO's default behaviour for preserving use-list order in
bitcode, and add API for controlling it. The default setting is now
`false` (don't preserve them), which is consistent with `clang`'s
default behaviour.
Users of libLTO should call `lto_codegen_should_embed_uselists(CG,true)`
prior to calling `lto_codegen_write_merged_modules()` whenever the
output file isn't part of the production workflow in order to reproduce
results with subsequent calls to `llc`.
(I haven't added tests since `llvm-lto` (the test tool for LTO) doesn't
support bitcode output, and even if it did: there isn't actually a good
way to test whether a tool has passed the flag. If the order is already
"natural" (if the order will already round-trip) then no use-list
directives are emitted at all. At some point I'll circle back to add
tests to `llvm-as` (etc.) that they actually respect the flag, at which
point I can somehow add a test here as well.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235943 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, the code would try to put a fall-through case last,
even if that meant moving a case with much higher branch weight
further down the chain.
Ordering by branch weight is most important, putting a fall-through
block last is secondary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235942 91177308-0d34-0410-b5e6-96231b3b80d8
After legalization, scalar SETCC has an i32 result type on AArch64.
The i1 requirement seems too conservative, replace it with an assert.
This also means that we now can run after legalization. That should also
be fine, since the ops legalizer runs again after each combine, and
all types created all have the same sizes as the (legal) inputs.
Exposed by r235917; while there, robustize its tests (bsl also uses the
register it defines).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235922 91177308-0d34-0410-b5e6-96231b3b80d8
PDB uses COFFObjectFile::getPE32Header which lives in libObject.
Make sure that LLVMBuild.txt reflects this dependency.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235920 91177308-0d34-0410-b5e6-96231b3b80d8
When the setcc has f64 operands, we can't build a vector setcc mask
to feed a vselect, because f64 doesn't divide v3f32 evenly.
Just bail out when that happens.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235917 91177308-0d34-0410-b5e6-96231b3b80d8
We need to dereference the signals mutex during handler registration so that we force its construction. This is to prevent the first use being during handling an actual signal because you can't safely allocate memory in a signal handler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235914 91177308-0d34-0410-b5e6-96231b3b80d8
Use a few extra bits in the const field (after widening it from a fixed
single bit) to stash the address space which is no longer provided by
the type (and an extra bit in there to specify that we're using that new
encoding).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235911 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a new SSA MI pass that runs on little-endian PPC64
code with VSX enabled. Loads and stores of 4x32 and 2x64 vectors
without alignment constraints are accomplished for little-endian using
lxvd2x/xxswapd and xxswapd/stxvd2x. The existence of the additional
xxswapd instructions hurts performance in comparison with big-endian
code, but they are necessary in the general case to support correct
semantics.
However, the general case does not apply to most vector code. Many
vector instructions are lane-insensitive; they do not "care" which
lanes the parallel computations are performed within, provided that
the resulting data is stored into the correct locations. Thus this
pass looks for computations that perform only lane-insensitive
operations, and remove the unnecessary swaps from loads and stores in
such computations.
Future improvements will allow computations using certain
lane-sensitive operations to also be optimized in this manner, by
modifying the lane-sensitive operations to account for the permuted
order of the lanes. However, this patch only adds the infrastructure
to permit this; no lane-sensitive operations are optimized at this
time.
This code is heavily exercised by the various vectorizing applications
in the projects/test-suite tree. For the time being, I have only added
one simple test case to demonstrate what the pass is doing. Although
it is quite simple, it provides coverage for much of the code,
including the special case handling of copies and subreg-to-reg
operations feeding the swaps. I plan to add additional tests in the
future as I fill in more of the "special handling" code.
Two existing tests were affected, because they expected the swaps to
be present, but they are now removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235910 91177308-0d34-0410-b5e6-96231b3b80d8
Use a loop instruction with a constant extender for a hardware
loop instruction that is too far away from the start of the loop.
This is cheaper than changing the SA register value.
Differential Revision: http://reviews.llvm.org/D9262
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235882 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Changed the warning message to show the current value of $at, similar to what clang does for typedef's, and renamed warnIfAssemblerTemporary to a more descriptive name.
I also changed the type of variables which store registers from int to unsigned, updated the relevant test and tried to make the related comments clearer.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8479
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235881 91177308-0d34-0410-b5e6-96231b3b80d8
This reapplies r235194, which was reverted in r235495 because it was causing a
failure in our out-of-tree buildbots for MIPS. With the sign-extension patch
in r235718, this patch doesn't cause any problem any more.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235878 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When used, it is substituted with the number of .macro instantiations we've done up to that point in time.
So if this is the 1st time we've instantiated a .macro (any .macro, regardless of name), \@ will instantiate to 0, if it's the 2nd .macro instantiation, it will instantiate to 1 etc.
It can only be used inside a .macro definition, an .irp definition or an .irpc definition (those last 2 uses are undocumented).
Reviewers: echristo, rafael
Reviewed By: rafael
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D9197
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235862 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch adds constant folding of insertelement instruction to undef value when index operand is constant and is not less than vector size or is undef.
InstCombine does not support this case, but I'm happy to add it there also if this change is accepted.
Test Plan: Unittests and regression tests for ConstProp pass.
Reviewers: majnemer
Reviewed By: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9287
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235854 91177308-0d34-0410-b5e6-96231b3b80d8
Patch to allow int8 vectors to be multiplied on the SSE unit instead of being scalarized.
The patch sign extends the i8 lanes to i16, uses the SSE2 pmullw multiplication instruction, then packs the lower byte from each result.
Differential Revision: http://reviews.llvm.org/D9115
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235837 91177308-0d34-0410-b5e6-96231b3b80d8
Looking into 23095, my best guess is that the CodeGen library itself isn't getting linked and initialized properly. To make this slightly more obvious to consumers of LLVM, emit a different error message if we can tell that the registry is empty vs you've simply happened to name a collector which hasn't been registered.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235824 91177308-0d34-0410-b5e6-96231b3b80d8
There can be various constant pointers in the IR which do not get relocated at a safepoint. One example is the address of a global variable. Another example is a pointer created via inttoptr. Note that the optimizer itself likes to create such inttoptrs when locally propagating constants through dynamically dead code.
To deal with this, we need to exclude uses of constants from contributing to the liveness of a safepoint which might reach that use. At some later date, it might be worth exploring what could be done to support the relocation of various special types of "constants", but that's future work.
Differential Revision: http://reviews.llvm.org/D9236
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235821 91177308-0d34-0410-b5e6-96231b3b80d8
This is a follow-on to D8833 (insertps optimization when the zero mask is not used).
In this patch, we check for the case where the zmask is used, but both input vectors
to the insertps intrinsic are the same operand or the zmask overrides the destination
lane. This lets us replace the 2nd shuffle input operand with the zero vector.
Differential Revision: http://reviews.llvm.org/D9257
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235810 91177308-0d34-0410-b5e6-96231b3b80d8
Update `lib/Linker` to handle `Function` metadata attachments. The
attachments stick with the function body.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235786 91177308-0d34-0410-b5e6-96231b3b80d8
Add serialization support for function metadata attachments (added in
r235783). The syntax is:
define @foo() !attach !0 {
Metadata attachments are only allowed on functions with bodies. Since
they come before the `{`, they're not really part of the body; since
they require a body, they're not really part of the header. In
`LLParser` I gave them a separate function called from `ParseDefine()`,
`ParseOptionalFunctionMetadata()`.
In bitcode, I'm using the same `METADATA_ATTACHMENT` record used by
instructions. Instruction metadata attachments are included in a
special "attachment" block at the end of a `Function`. The attachment
records are laid out like this:
InstID (KindID MetadataID)+
Note that these records always have an odd number of fields. The new
code takes advantage of this to recognize function attachments (which
don't need an instruction ID):
(KindID MetadataID)+
This means we can use the same attachment block already used for
instructions.
This is part of PR23340.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235785 91177308-0d34-0410-b5e6-96231b3b80d8
Add a verifier check that only functions with bodies have metadata
attachments. This should help catch bugs in frontends and
transformation passes. Part of PR23340.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235784 91177308-0d34-0410-b5e6-96231b3b80d8
Add IR support for `Metadata` attachments. Assembly and bitcode support
will follow shortly, but for now we just have unit tests. This is part
of PR23340.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235783 91177308-0d34-0410-b5e6-96231b3b80d8
Remove unused `PFS` variable and take the `Instruction` by reference.
(Not really related to PR23340, but might as well clean this up while
I'm here.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235782 91177308-0d34-0410-b5e6-96231b3b80d8
right scaling.
In the function canFoldInAddressingMode, VT is computed as the type of the
destination/source of a LOAD/STORE operations, instead of the memory type of the
operation.
On targets with a scaling factor on the offset of the LOAD/STORE operations, the
function may return false for actually valid cases. This may then prevent the
selection of profitable pre or post indexed load/store operations, and instead
select pre or post indexed load/store for unprofitable cases.
Patch by Francois de Ferriere <francois.de-ferriere@st.com>!
Differential Revision: http://reviews.llvm.org/D9146
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235780 91177308-0d34-0410-b5e6-96231b3b80d8