This should always be done as a matter of principal. I don't have a
case that exposes the problem. I just noticed this recently while
scanning the code and realized I meant to fix it long ago.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146438 91177308-0d34-0410-b5e6-96231b3b80d8
subdirectories to traverse into.
- Originally I wanted to avoid this and just autoscan, but this has one key
flaw in that new subdirectories can not automatically trigger a rerun of the
llvm-build tool. This is particularly a pain when switching back and forth
between trees where one has added a subdirectory, as the dependencies will
tend to be wrong. This will also eliminates FIXME implicitly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146436 91177308-0d34-0410-b5e6-96231b3b80d8
If we create new intervals for a variable that is being spilled, then those new intervals are not guaranteed to also spill. This means that anything reading from the original spilling value might not get the correct value if spills were missed.
Fixes <rdar://problem/10546864>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146428 91177308-0d34-0410-b5e6-96231b3b80d8
These modifiers simply select either the low or high D subregister of a Neon
Q register. I've also removed the unimplemented 'p' modifier, which turns out
to be a bit different than the comment here suggests and as far as I can tell
was only intended for internal use in Apple's version of gcc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146417 91177308-0d34-0410-b5e6-96231b3b80d8
detected in the forward-CFG DFS. This prevents the reverse-CFG from
visiting blocks inside loops after blocks that dominate them in the
case where loops have multiple exits.
No testcase, because this fixes a bug which in practice only shows
up in a full optimizer run, due to the use-list order.
This fixes rdar://10422791 and others.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146408 91177308-0d34-0410-b5e6-96231b3b80d8
Downgrade the alignment of the initial constant island when constant
pool entries are moved elsewhere.
This is all gated by -arm-align-constant-islands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146391 91177308-0d34-0410-b5e6-96231b3b80d8
Order constant pool entries by descending alignment in the initial
island to ensure packing and correct alignment. When the command line
flag is set, also align the basic block containing the constant pool
entries.
This is only a partial implementation of constant island alignment. More
to come.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146375 91177308-0d34-0410-b5e6-96231b3b80d8
indicates whether the intrinsic has a defined result for a first
argument equal to zero. This will eventually allow these intrinsics to
accurately model the semantics of GCC's __builtin_ctz and __builtin_clz
and the X86 instructions (prior to AVX) which implement them.
This patch merely sets the stage by extending the signature of these
intrinsics and establishing auto-upgrade logic so that the old spelling
still works both in IR and in bitcode. The upgrade logic preserves the
existing (inefficient) semantics. This patch should not change any
behavior. CodeGen isn't updated because it can use the existing
semantics regardless of the flag's value.
Note that this will be followed by API updates to Clang and DragonEgg.
Reviewed by Nick Lewycky!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146357 91177308-0d34-0410-b5e6-96231b3b80d8
The OptLevel is now redundant with the TargetMachine*.
And selectTarget() isn't really JIT-specific and could probably
get refactored into one of the lower level libraries.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146355 91177308-0d34-0410-b5e6-96231b3b80d8
The split point is picked such that the newly created water has the same
alignment as the function. This makes the island suitable for constant
pool entries with potentially higher alignment.
This also fixes an issue where the basic block was split one instruction
too late, causing nonconvergence of the algorithm.
<rdar://problem/10550705>
There is still an issue with correctly packing differently aligned
entries in the island.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146314 91177308-0d34-0410-b5e6-96231b3b80d8
does. The _GLOBAL_OFFSET_TABLE_ is still magical in that we get a R_386_GOTPC,
but it doesn't change the immediate in the same way as when the expression
has no right hand side symbol.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146311 91177308-0d34-0410-b5e6-96231b3b80d8
Since we're not rewriting IVs in other loops, there's not much reason
to consider their stride when generating formulae.
This should reduce the number of useless formulas considered by LSR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146302 91177308-0d34-0410-b5e6-96231b3b80d8
Backwards compatibility with 'gas'. #imm is the preferered and documented
syntax, but lots of existing code uses the '$' prefix, so we should
support it if we can.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146285 91177308-0d34-0410-b5e6-96231b3b80d8
When the immediate operand of an AND or BIC instruction isn't representable
in the immediate field of the instruction, but the bitwise negation of the
immediate is, assemble the instruction as the inverse operation instead
with the inverted immediate as the operand.
rdar://10550057
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146283 91177308-0d34-0410-b5e6-96231b3b80d8
Refactor the instructions into fixed writeback and register-stride
writeback variants to simplify the offset operand (no more optional
register operand using reg0). This is a simpler representation and allows
the assembly parser to more easily handle these instructions.
Add tests for the instruction variants now supported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146278 91177308-0d34-0410-b5e6-96231b3b80d8
generates the dwarf Compile Unit DIE and a dwarf subprogram DIE for each
non-temporary label.
The next part will be to get the clang driver to enable this when assembling
a .s file. rdar://9275556
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146262 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Brendon Cahoon!
This extends the existing LoopUnroll and LoopUnrollPass. Brendon
measured no regressions in the llvm test suite with -unroll-runtime
enabled. This implementation works by using the existing loop
unrolling code to unroll the loop by a power-of-two (default 8). It
generates an if-then-else sequence of code prior to the loop to
execute the extra iterations before entering the unrolled loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146245 91177308-0d34-0410-b5e6-96231b3b80d8
symbol difference. This matches gas behavior and fixes PR11513.
We still don't handle _GLOBAL_OFFSET_TABLE_ in data sections.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146238 91177308-0d34-0410-b5e6-96231b3b80d8
MipsTargetLowering::LowerGlobalTLSAddress. This is necessary to have
call16(__tls_get_addr) emitted instead of got_disp(__tls_get_addr) when the
target is Mips64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146183 91177308-0d34-0410-b5e6-96231b3b80d8
- Modify lowering of global TLS address nodes.
- Modify isel of ThreadPointer.
- Wrap target global TLS address nodes that are operands of loads with WrapperPIC.
- Remove Mips-specific DAG nodes TlsGd, TprelHi and TprelLo, which can be
substituted with other existing nodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146175 91177308-0d34-0410-b5e6-96231b3b80d8
clients to decide whether to look inside bundled instructions and whether
the query should return true if any / all bundled instructions have the
queried property.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146168 91177308-0d34-0410-b5e6-96231b3b80d8
if (HasAVX)
X86SSELevel = NoMMXSSE;
This is so patterns that are predicated on hasSSE3, etc. would not be selected when avx is available. Instead, the AVX variant is selected.
However, this breaks instructions which do not have AVX variants.
The right way to fix this is for the SSE but not-AVX patterns to predicate on something like hasSSE3() && !hasAVX().
Then we can take out the hack in X86Subtarget.cpp. Patterns which do not have AVX variants do not need to change.
However, we need to audit all the patterns before we make the change. This patch is workaround that fixes one specific case,
the prefetch instructions. rdar://10538297
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146163 91177308-0d34-0410-b5e6-96231b3b80d8
We must not issue a bitcast operation for integer-promotion of vector types, because the
location of the values in the vector may be different.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146150 91177308-0d34-0410-b5e6-96231b3b80d8
It is not used any more. We are tracking inline assembly misalignments
directly through the BBInfo.Unalign and KnownBits fields.
A simple conservative size estimate is not good enough since it can
cause alignment padding to be underestimated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146124 91177308-0d34-0410-b5e6-96231b3b80d8
Compute alignment padding before and after basic blocks dynamically.
Heed basic block alignment.
This simplifies bookkeeping because we don't have to constantly add and
remove padding from BBInfo.Size. It also makes it possible to track the
extra known alignment bits we get after a tBR_JTr terminator and when
entering an aligned basic block.
This makes the ARMConstantIslandPass aware of aligned basic blocks.
It is tricky to model block alignment correctly when dealing with inline
assembly and tBR_JTr instructions that have variable size. If inline
assembly turns out to be smaller than expected, that may cause following
alignment padding to be larger than expected. This could cause constant
pool entries to move out of range.
To avoid that problem, we use the worst case alignment padding following
inline assembly. This may cause slightly suboptimal constant island
placement in aligned basic blocks following inline assembly. Normal
functions should be unaffected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146118 91177308-0d34-0410-b5e6-96231b3b80d8
files. First, add a new block USELIST_BLOCK to the bitcode format. This is
where USELIST_CODE_ENTRYs will be stored. The format of the USELIST_CODE_ENTRYs
have not yet been defined. Add support in the BitcodeReader for parsing the
USELIST_BLOCK.
Part of rdar://9860654 and PR5680.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146078 91177308-0d34-0410-b5e6-96231b3b80d8
When the file isn't being built with subsections-via-symbols, symbol
differences involving non-local symbols can be resolved more aggressively.
Needed for gas compatibility.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146054 91177308-0d34-0410-b5e6-96231b3b80d8
