This reverts commit 06091513c2.
The code is obviously wrong, but the trivial fix causes
inefficient code generation on X86. Somebody with more
knowledge of the code needs to take a look here.
Signed-off-by: Christian König <christian.koenig@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177529 91177308-0d34-0410-b5e6-96231b3b80d8
TargetOpcodes need to be treaded as Machine- and not ISD-Opcodes.
Signed-off-by: Christian König <christian.koenig@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177518 91177308-0d34-0410-b5e6-96231b3b80d8
A node's ordering is only propagated during legalization if (a) the new node does
not have an ordering (is not a CSE'd node), or (b) the new node has an ordering
that is higher than the node being legalized.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177465 91177308-0d34-0410-b5e6-96231b3b80d8
This doesn't reset all of the target options within the TargetOptions
object. This is because some of those are ABI-specific and must be determined if
it's okay to change those on the fly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176986 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Statistics are still available in Release+Asserts (any +Asserts builds),
and stats can also be turned on with LLVM_ENABLE_STATS.
Move some of the FastISel stats that were moved under DEBUG()
back out of DEBUG(), since stats are disabled across the board now.
Many tests depend on grepping "-stats" output. Move those into
a orig_dir/Stats/. so that they can be marked as unsupported
when building without statistics.
Differential Revision: http://llvm-reviews.chandlerc.com/D486
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176733 91177308-0d34-0410-b5e6-96231b3b80d8
LegalizeDAG.cpp uses the value of the comparison operands when checking
the legality of BR_CC, so DAGCombiner should do the same.
v2:
- Expand more BR_CC value types for NVPTX
v3:
- Expand correct BR_CC value types for Hexagon, Mips, and XCore.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176694 91177308-0d34-0410-b5e6-96231b3b80d8
Code generation makes some basic assumptions about the IR it's been given. In
particular, if there is only one 'invoke' in the function, then that invoke
won't be going away. However, with the advent of the `llvm.donothing' intrinsic,
those invokes may go away. If all of them go away, the landing pad no longer has
any users. This confuses the back-end, which asserts.
This happens with SjLj exceptions, because that's the model that modifies the IR
based on there being invokes, etc. in the function.
Remove any invokes of `llvm.donothing' during SjLj EH preparation. This will
give us a CFG that the back-end won't be confused about. If all of the invokes
in a function are removed, then the SjLj EH prepare pass won't insert the bogus
code the relies upon the invokes being there.
<rdar://problem/13228754&13316637>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176677 91177308-0d34-0410-b5e6-96231b3b80d8
rdar:13370002 [pre-RA-sched] assertion: released too many times
I tracked this down to an earlier hack that is no longer applicable
and interfered with normal scheduler logic. With the changes in
r176037, it was causing an instruction to be scheduled multiple times.
I have an external test case that I tried hard to reduce and
failed. I can't even reproduce with llc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176636 91177308-0d34-0410-b5e6-96231b3b80d8
- ISD::SHL/SRL/SRA must have either both scalar or both vector operands
but TLI.getShiftAmountTy() so far only return scalar type. As a
result, backend logic assuming that breaks.
- Rename the original TLI.getShiftAmountTy() to
TLI.getScalarShiftAmountTy() and re-define TLI.getShiftAmountTy() to
return target-specificed scalar type or the same vector type as the
1st operand.
- Fix most TICG logic assuming TLI.getShiftAmountTy() a simple scalar
type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176364 91177308-0d34-0410-b5e6-96231b3b80d8
SelectionDAGIsel::LowerArguments needs a function, not a basic block. So it
makes sense to pass it the function instead of extracting a basic-block from
the function and then tossing it. This is also more self-documenting (functions
have arguments, BBs don't).
In addition, added comments to a couple of Select* methods.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176305 91177308-0d34-0410-b5e6-96231b3b80d8
This patch disables the counters on non-debug builds. This reduces the runtime of SelectionDAGISel::SelectCodeCommon by ~5%.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176214 91177308-0d34-0410-b5e6-96231b3b80d8
fewer scalar integer (i32 or i64) arguments. It completely eliminates the need
for SDISel for trivial functions.
Also, add the new llc -fast-isel-abort-args option, which is similar to
-fast-isel-abort option, but for formal argument lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176052 91177308-0d34-0410-b5e6-96231b3b80d8
memory intrinsics in the SDAG builder.
When alignment is zero, the lang ref says that *no* alignment
assumptions can be made. This is the exact opposite of the internal API
contracts of the DAG where alignment 0 indicates that the alignment can
be made to be anything desired.
There is another, more explicit alignment that is better suited for the
role of "no alignment at all": an alignment of 1. Map the intrinsic
alignment to this early so that we don't end up generating aligned DAGs.
It is really terrifying that we've never seen this before, but we
suddenly started generating a large number of alignment 0 memcpys due to
the new code to do memcpy-based copying of POD class members. That patch
contains a bug that rounds bitfield alignments down when they are the
first field. This can in turn produce zero alignments.
This fixes weird crashes I've seen in library users of LLVM on 32-bit
hosts, etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176022 91177308-0d34-0410-b5e6-96231b3b80d8
One of the phases of SelectionDAG is LegalizeVectors. We don't need to sort the DAG and copy nodes around if there are no vector ops.
Speeds up the compilation time of SelectionDAG on a big scalar workload by ~8%.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175929 91177308-0d34-0410-b5e6-96231b3b80d8
It was incorrectly checking a Function* being an IntrinsicInst* which
isn't possible. It should always have been checking the CallInst* instead.
Added test case for x86 which ensures we only get one constant load.
It was 2 before this change.
rdar://problem/13267920
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175853 91177308-0d34-0410-b5e6-96231b3b80d8
A legal BUILD_VECTOR goes in and gets constant folded into another legal
BUILD_VECTOR so we don't lose any legality here. The problematic PPC
optimization that made this check necessary was fixed recently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175759 91177308-0d34-0410-b5e6-96231b3b80d8
(2xi32) (truncate ((2xi64) bitcast (buildvector i32 a, i32 x, i32 b, i32 y)))
can be folded into a (2xi32) (buildvector i32 a, i32 b).
Such a DAG would cause uneccessary vdup instructions followed by vmovn
instructions.
We generate this code on ARM NEON for a setcc olt, 2xf64, 2xf64. For example, in
the vectorized version of the code below.
double A[N];
double B[N];
void test_double_compare_to_double() {
int i;
for(i=0;i<N;i++)
A[i] = (double)(A[i] < B[i]);
}
radar://13191881
Fixes bug 15283.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175670 91177308-0d34-0410-b5e6-96231b3b80d8
- When extloading from a vector with non-byte-addressable element, e.g.
<4 x i1>, the current logic breaks. Extend the current logic to
fix the case where the element type is not byte-addressable by loading
all bytes, bit-extracting/packing each element.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175642 91177308-0d34-0410-b5e6-96231b3b80d8
If the frame pointer is omitted, and any stack changes occur in the inline
assembly, e.g.: "pusha", then any C local variable or C argument references
will be incorrect.
I pass no judgement on anyone who would do such a thing. ;)
rdar://13218191
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175334 91177308-0d34-0410-b5e6-96231b3b80d8
If two functions require different features (e.g., `-mno-sse' vs. `-msse') then
we want to honor that, especially during LTO. We can do that by resetting the
subtarget's features depending upon the 'target-feature' attribute.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175314 91177308-0d34-0410-b5e6-96231b3b80d8
- add sincos to runtime library if target triple environment is GNU
- added canCombineSinCosLibcall() which checks that sincos is in the RTL and
if the environment is GNU then unsafe fpmath is enabled (required to
preserve errno)
- extended sincos-opt lit test
Reviewed by: Hal Finkel
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175283 91177308-0d34-0410-b5e6-96231b3b80d8
DAGCombiner::ReduceLoadWidth was converting (trunc i32 (shl i64 v, 32))
into (shl i32 v, 32) into undef. To prevent this, check the shift count
against the final result size.
Patch by: Kevin Schoedel
Reviewed by: Nadav Rotem
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174972 91177308-0d34-0410-b5e6-96231b3b80d8
Sorry for the lack of a test case. I tried writing one for i386 as i know selects are illegal on this target, but they are actually considered legal by isel and expanded later.
I can't see any targets to trigger this, but checking for the legality of a node before forming it is general goodness.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174934 91177308-0d34-0410-b5e6-96231b3b80d8
function is successfully handled by fast-isel. That's because function
arguments are *always* handled by SDISel. Introduce FastLowerArguments to
allow each target to provide hook to handle formal argument lowering.
As a proof-of-concept, add ARMFastIsel::FastLowerArguments to handle
functions with 4 or fewer scalar integer (i8, i16, or i32) arguments. It
completely eliminates the need for SDISel for trivial functions.
rdar://13163905
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174855 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, even when a pre-increment load or store was generated,
we often needed to keep a copy of the original base register for use
with other offsets. If all of these offsets are constants (including
the offset which was combined into the addressing mode), then this is
clearly unnecessary. This change adjusts these other offsets to use the
new incremented address.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174746 91177308-0d34-0410-b5e6-96231b3b80d8
Aside from the question of whether we report a warning or an error when we
can't satisfy a requested stack object alignment, the current implementation
of this is not good. We're not providing any source location in the diagnostics
and the current warning is not connected to any warning group so you can't
control it. We could improve the source location somewhat, but we can do a
much better job if this check is implemented in the front-end, so let's do that
instead. <rdar://problem/13127907>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174741 91177308-0d34-0410-b5e6-96231b3b80d8
base point of a load, and the overall alignment of the load. This caused infinite loops in DAG combine with the
original application of this patch.
ORIGINAL COMMIT LOG:
When the target-independent DAGCombiner inferred a higher alignment for a load,
it would replace the load with one with the higher alignment. However, it did
not place the new load in the worklist, which prevented later DAG combines in
the same phase (for example, target-specific combines) from ever seeing it.
This patch corrects that oversight, and updates some tests whose output changed
due to slightly different DAGCombine outputs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174431 91177308-0d34-0410-b5e6-96231b3b80d8
It caused hangups in compiling clang/lib/Parse/ParseDecl.cpp and clang/lib/Driver/Tools.cpp in stage2 on some hosts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174374 91177308-0d34-0410-b5e6-96231b3b80d8
it would replace the load with one with the higher alignment. However, it did
not place the new load in the worklist, which prevented later DAG combines in
the same phase (for example, target-specific combines) from ever seeing it.
This patch corrects that oversight, and updates some tests whose output changed
due to slightly different DAGCombine outputs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174343 91177308-0d34-0410-b5e6-96231b3b80d8
This required disabling a PowerPC optimization that did the following:
input:
x = BUILD_VECTOR <i32 16, i32 16, i32 16, i32 16>
lowered to:
tmp = BUILD_VECTOR <i32 8, i32 8, i32 8, i32 8>
x = ADD tmp, tmp
The add now gets folded immediately and we're back at the BUILD_VECTOR we
started from. I don't see a way to fix this currently so I left it disabled
for now.
Fix some trivially foldable X86 tests too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174325 91177308-0d34-0410-b5e6-96231b3b80d8
conditions are met:
1. They share the same operand and are in the same BB.
2. Both outputs are used.
3. The target has a native instruction that maps to ISD::FSINCOS node or
the target provides a sincos library call.
Implemented the generic optimization in sdisel and enabled it for
Mac OSX. Also added an additional optimization for x86_64 Mac OSX by
using an alternative entry point __sincos_stret which returns the two
results in xmm0 / xmm1.
rdar://13087969
PR13204
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173755 91177308-0d34-0410-b5e6-96231b3b80d8
Fix that by adding a cast to the shift expander. This came up with vector shifts
on sse-less X86 CPUs.
<2 x i64> = shl <2 x i64> <2 x i64>
-> i64,i64 = shl i64 i64; shl i64 i64
-> i32,i32,i32,i32 = shl_parts i32 i32 i64; shl_parts i32 i32 i64
Now we cast the last two i64s to the right type. Fixes the crash in PR14668.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173615 91177308-0d34-0410-b5e6-96231b3b80d8
with an initial number of elements, instead of DenseMap, which has
zero initial elements, in order to avoid the copying of elements
when the size changes and to avoid allocating space every time
LegalizeTypes is run. This patch will not affect the memory footprint,
because DenseMap will increase the element size to 64
when the first element is added.
Patch by Wan Xiaofei.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173448 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we tried to infer it from the bit width size, with an added
IsIEEE argument for the PPC/IEEE 128-bit case, which had a default
value. This default value allowed bugs to creep in, where it was
inappropriate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173138 91177308-0d34-0410-b5e6-96231b3b80d8
The optimization handles esoteric cases but adds a lot of complexity both to the X86 backend and to other backends.
This optimization disables an important canonicalization of chains of SEXT nodes and makes SEXT and ZEXT asymmetrical.
Disabling the canonicalization of consecutive SEXT nodes into a single node disables other DAG optimizations that assume
that there is only one SEXT node. The AVX mask optimizations is one example. Additionally this optimization does not update the cost model.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172968 91177308-0d34-0410-b5e6-96231b3b80d8
Further encapsulation of the Attribute object. Don't allow direct access to the
Attribute object as an aggregate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172853 91177308-0d34-0410-b5e6-96231b3b80d8
The included test case is derived from one of the GCC compatibility tests.
The problem arises after the selection DAG has been converted to type-legalized
form. The combiner first sees a 64-bit load that can be converted into a
pre-increment form. The original load feeds into a SRL that isolates the
upper 32 bits of the loaded doubleword. This looks like an opportunity for
DAGCombiner::ReduceLoadWidth() to replace the 64-bit load with a 32-bit load.
However, this transformation is not valid, as the replacement load is not
a pre-increment load. The pre-increment load produces an extra result,
which feeds a subsequent add instruction. The replacement load only has
one result value, and this value is propagated to all uses of the pre-
increment load, including the add. Because the add is looking for the
second result value as its operand, it ends up attempting to add a constant
to a token chain, resulting in a crash.
So the patch simply disables this transformation for any load with more than
two result values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172480 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still
a complete mess but as long as the edges consist of virtual call it doesn't
cause breakage. BasicTTI did static calls and thus broke some build
configurations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172246 91177308-0d34-0410-b5e6-96231b3b80d8
- recognize string "{memory}" in the MI generation
- mark as mayload/maystore when there's a memory clobber constraint.
PR14859.
Patch by Krzysztof Parzyszek
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172228 91177308-0d34-0410-b5e6-96231b3b80d8
requirement when creating stack objects in MachineFrameInfo.
Add CreateStackObjectWithMinAlign to throw error when the minimal alignment
can't be achieved and to clamp the alignment when the preferred alignment
can't be achieved. Same is true for CreateVariableSizedObject.
Will not emit error in CreateSpillStackObject or CreateStackObject.
As long as callers of CreateStackObject do not assume the object will be
aligned at the requested alignment, we should not have miscompile since
later optimizations which look at the object's alignment will have the correct
information.
rdar://12713765
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172027 91177308-0d34-0410-b5e6-96231b3b80d8
It cahced XOR's operands before calling visitXOR() but failed to update the
operands when visitXOR changed the XOR node.
rdar://12968664
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171999 91177308-0d34-0410-b5e6-96231b3b80d8
fp128 is almost but not quite completely illegal as a type on AArch64. As a
result it needs to have a register class (for argument passing mainly), but all
operations need to be lowered to runtime calls. Currently there's no way for
targets to do this (without duplicating code), as the relevant functions are
hidden in SelectionDAG. This patch changes that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171971 91177308-0d34-0410-b5e6-96231b3b80d8
one file where it is called as a static function. Nuke the declaration
and the definition in lib/CodeGen, along with the include of
SelectionDAG.h from this file.
There is no dependency edge from lib/CodeGen to
lib/CodeGen/SelectionDAG, so it isn't valid for a routine in lib/CodeGen
to reference the DAG. There is a dependency from
lib/CodeGen/SelectionDAG on lib/CodeGen. This breaks one violation of
this layering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171842 91177308-0d34-0410-b5e6-96231b3b80d8
peculiar headers under include/llvm.
This struct still doesn't make a lot of sense, but it makes more sense
down in TargetLowering than it did before.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171739 91177308-0d34-0410-b5e6-96231b3b80d8
a TargetMachine to construct (and thus isn't always available), to an
analysis group that supports layered implementations much like
AliasAnalysis does. This is a pretty massive change, with a few parts
that I was unable to easily separate (sorry), so I'll walk through it.
The first step of this conversion was to make TargetTransformInfo an
analysis group, and to sink the nonce implementations in
ScalarTargetTransformInfo and VectorTargetTranformInfo into
a NoTargetTransformInfo pass. This allows other passes to add a hard
requirement on TTI, and assume they will always get at least on
implementation.
The TargetTransformInfo analysis group leverages the delegation chaining
trick that AliasAnalysis uses, where the base class for the analysis
group delegates to the previous analysis *pass*, allowing all but tho
NoFoo analysis passes to only implement the parts of the interfaces they
support. It also introduces a new trick where each pass in the group
retains a pointer to the top-most pass that has been initialized. This
allows passes to implement one API in terms of another API and benefit
when some other pass above them in the stack has more precise results
for the second API.
The second step of this conversion is to create a pass that implements
the TargetTransformInfo analysis using the target-independent
abstractions in the code generator. This replaces the
ScalarTargetTransformImpl and VectorTargetTransformImpl classes in
lib/Target with a single pass in lib/CodeGen called
BasicTargetTransformInfo. This class actually provides most of the TTI
functionality, basing it upon the TargetLowering abstraction and other
information in the target independent code generator.
The third step of the conversion adds support to all TargetMachines to
register custom analysis passes. This allows building those passes with
access to TargetLowering or other target-specific classes, and it also
allows each target to customize the set of analysis passes desired in
the pass manager. The baseline LLVMTargetMachine implements this
interface to add the BasicTTI pass to the pass manager, and all of the
tools that want to support target-aware TTI passes call this routine on
whatever target machine they end up with to add the appropriate passes.
The fourth step of the conversion created target-specific TTI analysis
passes for the X86 and ARM backends. These passes contain the custom
logic that was previously in their extensions of the
ScalarTargetTransformInfo and VectorTargetTransformInfo interfaces.
I separated them into their own file, as now all of the interface bits
are private and they just expose a function to create the pass itself.
Then I extended these target machines to set up a custom set of analysis
passes, first adding BasicTTI as a fallback, and then adding their
customized TTI implementations.
The fourth step required logic that was shared between the target
independent layer and the specific targets to move to a different
interface, as they no longer derive from each other. As a consequence,
a helper functions were added to TargetLowering representing the common
logic needed both in the target implementation and the codegen
implementation of the TTI pass. While technically this is the only
change that could have been committed separately, it would have been
a nightmare to extract.
The final step of the conversion was just to delete all the old
boilerplate. This got rid of the ScalarTargetTransformInfo and
VectorTargetTransformInfo classes, all of the support in all of the
targets for producing instances of them, and all of the support in the
tools for manually constructing a pass based around them.
Now that TTI is a relatively normal analysis group, two things become
straightforward. First, we can sink it into lib/Analysis which is a more
natural layer for it to live. Second, clients of this interface can
depend on it *always* being available which will simplify their code and
behavior. These (and other) simplifications will follow in subsequent
commits, this one is clearly big enough.
Finally, I'm very aware that much of the comments and documentation
needs to be updated. As soon as I had this working, and plausibly well
commented, I wanted to get it committed and in front of the build bots.
I'll be doing a few passes over documentation later if it sticks.
Commits to update DragonEgg and Clang will be made presently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171681 91177308-0d34-0410-b5e6-96231b3b80d8
pass into the SelectionDAG itself rather than snooping on the
implementation of that pass as exposed by the TargetMachine. This
removes the last direct client of the ScalarTargetTransformInfo class
outside of the TTI pass implementation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171625 91177308-0d34-0410-b5e6-96231b3b80d8
DAGCombiner::reduceBuildVecConvertToConvertBuildVec() was making two
mistakes:
1. It was checking the legality of scalar INT_TO_FP nodes and then generating
vector nodes.
2. It was passing the result value type to
TargetLoweringInfo::getOperationAction() when it should have been
passing the value type of the first operand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171420 91177308-0d34-0410-b5e6-96231b3b80d8
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.
There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.
The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.
I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).
I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171366 91177308-0d34-0410-b5e6-96231b3b80d8
utils/sort_includes.py script.
Most of these are updating the new R600 target and fixing up a few
regressions that have creeped in since the last time I sorted the
includes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171362 91177308-0d34-0410-b5e6-96231b3b80d8
