ARM FastISel is currently only enabled for iOS non-Thumb1, and I'm working on
enabling it for other targets. As a first step I've fixed some of the tests.
Changes to ARM FastISel tests:
- Different triples don't generate the same relocations (especially
movw/movt versus constant pool loads). Use a regex to allow either.
- Mangling is different. Use a regex to allow either.
- The reserved registers are sometimes different, so registers get
allocated in a different order. Capture the names only where this
occurs.
- Add -verify-machineinstrs to some tests where it works. It doesn't
work everywhere it should yet.
- Add -fast-isel-abort to many tests that didn't have it before.
- Split out the VarArg test from fast-isel-call.ll into its own
test. This simplifies test setup because of --check-prefix.
Patch by JF Bastien
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181801 91177308-0d34-0410-b5e6-96231b3b80d8
The changes to CR spill handling missed a case for 32-bit PowerPC.
The code in PPCFrameLowering::processFunctionBeforeFrameFinalized()
checks whether CR spill has occurred using a flag in the function
info. This flag is only set by storeRegToStackSlot and
loadRegFromStackSlot. spillCalleeSavedRegisters does not call
storeRegToStackSlot, but instead produces MI directly. Thus we don't
see the CR is spilled when assigning frame offsets, and the CR spill
ends up colliding with some other location (generally the FP slot).
This patch sets the flag in spillCalleeSavedRegisters for PPC32 so
that the CR spill is properly detected and gets its own slot in the
stack frame.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181800 91177308-0d34-0410-b5e6-96231b3b80d8
Mips16/32 floating point interoperability.
When Mips16 code calls external functions that would normally have some
of its parameters or return values passed in floating point registers,
it needs (Mips32) helper functions to do this because while in Mips16 mode
there is no ability to access the floating point registers.
In Pic mode, this is done with a set of predefined functions in libc.
This case is already handled in llvm for Mips16.
In static relocation mode, for efficiency reasons, the compiler generates
stubs that the linker will use if it turns out that the external function
is a Mips32 function. (If it's Mips16, then it does not need the helper
stubs).
These stubs are identically named and the linker knows about these tricks
and will not create multiple copies and will delete them if they are not
needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181753 91177308-0d34-0410-b5e6-96231b3b80d8
object is a PseudoSourceValue and PseudoSourceValue::isConstant returns true (i.e.,
points to memory that has a constant value).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181751 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes warning messages observed in the oggenc application test in
projects/test-suite. Special handling is needed for the 64-bit
PowerPC SVR4 ABI when a constant is initialized with a pointer to a
function in a shared library. Because a function address is
implemented as the address of a function descriptor, the use of copy
relocations can lead to problems with initialization. GNU ld
therefore replaces copy relocations with dynamic relocations to be
resolved by the dynamic linker. This means the constant cannot reside
in the read-only data section, but instead belongs in .data.rel.ro,
which is designed for constants containing dynamic relocations.
The implementation creates a class PPC64LinuxTargetObjectFile
inheriting from TargetLoweringObjectFileELF, which behaves like its
parent except to place constants of this sort into .data.rel.ro.
The test case is reduced from the oggenc application.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181723 91177308-0d34-0410-b5e6-96231b3b80d8
This option is used when the user wants to avoid emitting double precision FP
loads and stores. Double precision FP loads and stores are expanded to single
precision instructions after register allocation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181718 91177308-0d34-0410-b5e6-96231b3b80d8
return values are bitcasts.
The chain had previously been being clobbered with the entry node to
the dag, which sometimes caused other code in the function to be
erroneously deleted when tailcall optimization kicked in.
<rdar://problem/13827621>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181696 91177308-0d34-0410-b5e6-96231b3b80d8
mips16/mips32 floating point interoperability.
This patch fixes returns from mips16 functions so that if the function
was in fact called by a mips32 hard float routine, then values
that would have been returned in floating point registers are so returned.
Mips16 mode has no floating point instructions so there is no way to
load values into floating point registers.
This is needed when returning float, double, single complex, double complex
in the Mips ABI.
Helper functions in libc for mips16 are available to do this.
For efficiency purposes, these helper functions have a different calling
convention from normal Mips calls.
Registers v0,v1,a0,a1 are used to pass parameters instead of
a0,a1,a2,a3.
This is because v0,v1,a0,a1 are the natural registers used to return
floating point values in soft float. These values can then be moved
to the appropriate floating point registers with no extra cost.
The only register that is modified is ra in this call.
The helper functions make sure that the return values are in the floating
point registers that they would be in if soft float was not in effect
(which it is for mips16, though the soft float is implemented using a mips32
library that uses hard float).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181641 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by: Aaron Watry
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Aaron Watry <awatry@gmail.com>
NOTE: This is a candidate for the 3.3 branch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181579 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes piglit test for OpenCL builtin mul24, and allows mad24 to run.
Patch by: Aaron Watry
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Aaron Watry <awatry@gmail.com>
NOTE: This is a candidate for the 3.3 branch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181578 91177308-0d34-0410-b5e6-96231b3b80d8
v2: Add v4i32 test
Patch by: Aaron Watry
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Aaron Watry <awatry@gmail.com>
NOTE: This is a candidate for the 3.3 branch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181577 91177308-0d34-0410-b5e6-96231b3b80d8
v2: Add vselect v4i32 test
Patch by: Aaron Watry
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Aaron Watry <awatry@gmail.com>
NOTE: This is a candidate for the 3.3 branch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181576 91177308-0d34-0410-b5e6-96231b3b80d8
We generate a `push' of a random register (%rax) if the stack needs to be
aligned by the size of that register. However, this could mess up compact unwind
generation. In particular, we want to still generate compact unwind in the
presence of this monstrosity.
Check if the push of of the %rax/%eax register. If it is and it's marked with
the `FrameSetup' flag, then we can generate a compact unwind encoding for the
function only if the push is the last FrameSetup instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181540 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we only checked if the LR required saving if the frame size was
non zero. However because the caller reserves 1 word for the callee to use
that doesn't count towards our frame size it is possible for the LR to need
saving and for the frame size to be 0.
We didn't hit when the LR needed saving because of a function calls because
the 1 word of stack we must allocate for our callee means the frame size
is always non zero in this case. However we can hit this case if the LR is
clobbered in inline asm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181520 91177308-0d34-0410-b5e6-96231b3b80d8
The floating-point record forms on PPC don't set the condition register bits
based on a comparison with zero (like the integer record forms do), but rather
based on the exception status bits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181423 91177308-0d34-0410-b5e6-96231b3b80d8
Fold (xor (and x, y), y) -> (and (not x), y)
This removes an opportunity for a constant to appear twice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181395 91177308-0d34-0410-b5e6-96231b3b80d8
This adds all CodeGen tests for the SystemZ target.
This version of the patch incorporates feedback from a review by
Sean Silva. Thanks to all reviewers!
Patch by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181204 91177308-0d34-0410-b5e6-96231b3b80d8
Now even the small structures could be passed within byval (small enough
to be stored in GPRs).
In regression tests next function prototypes are checked:
PR15293:
%artz = type { i32 }
define void @foo(%artz* byval %s)
define void @foo2(%artz* byval %s, i32 %p, %artz* byval %s2)
foo: "s" stored in R0
foo2: "s" stored in R0, "s2" stored in R2.
Next AAPCS rules are checked:
5.5 Parameters Passing, C.4 and C.5,
"ParamSize" is parameter size in 32bit words:
-- NSAA != 0, NCRN < R4 and NCRN+ParamSize > R4.
Parameter should be sent to the stack; NCRN := R4.
-- NSAA != 0, and NCRN < R4, NCRN+ParamSize < R4.
Parameter stored in GPRs; NCRN += ParamSize.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181148 91177308-0d34-0410-b5e6-96231b3b80d8
X86ISelLowering has support to treat:
(icmp ne (and (xor %flags, -1), (shl 1, flag)), 0)
as if it were actually:
(icmp eq (and %flags, (shl 1, flag)), 0)
However, r179386 has code at the InstCombine level to handle this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181145 91177308-0d34-0410-b5e6-96231b3b80d8
The MOVZ/MOVK instruction sequence may not be the most efficient (a
literal-pool load could be better) but adding that would require
reinstating the ConstantIslands pass.
For now the sequence is correct, and that's enough. Beware, as of
commit GNU ld does not appear to support the relocations needed for
this. Its primary purpose (for now) will be to support JITed code,
since in that case there is no guarantee of where your code will end
up in memory relative to external symbols it references.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181117 91177308-0d34-0410-b5e6-96231b3b80d8
its fields.
This removes false dependencies between DSP instructions which access different
fields of the the control register. Implicit register operands are added to
instructions RDDSP and WRDSP after instruction selection, depending on the
value of the mask operand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181041 91177308-0d34-0410-b5e6-96231b3b80d8
