..
cconv
[mips] Add CCValAssign::[ASZ]ExtUpper and CCPromoteToUpperBitsInType and handle struct's correctly on big-endian N32/N64 return values.
2014-09-25 12:15:05 +00:00
Fast-ISel
Add mips32 r1 to the list of supported targets for Mips fast-isel
2014-09-15 20:30:25 +00:00
llvm-ir
[mips][mips64r6] Use JALR for indirect branches instead of JR (which is not available on MIPS32r6/MIPS64r6)
2014-07-09 10:21:59 +00:00
mips32r6
[mips][mips64r6] Add experimental support for MIPS32r6 and MIPS64r6
2014-05-09 09:46:21 +00:00
mips64r6
[mips][mips64r6] Add experimental support for MIPS32r6 and MIPS64r6
2014-05-09 09:46:21 +00:00
msa
Fix fmul combines with constant splat vectors
2014-08-16 10:14:19 +00:00
2008-06-05-Carry.ll
2008-07-03-SRet.ll
2008-07-06-fadd64.ll
2008-07-07-Float2Int.ll
2008-07-07-FPExtend.ll
2008-07-07-IntDoubleConvertions.ll
2008-07-15-InternalConstant.ll
2008-07-15-SmallSection.ll
2008-07-16-SignExtInReg.ll
2008-07-22-Cstpool.ll
2008-07-23-fpcmp.ll
2008-07-29-icmp.ll
2008-07-31-fcopysign.ll
2008-08-01-AsmInline.ll
[mips][mips64r6] Improve tests affected by the changes to multiplies and divides
2014-06-11 15:48:00 +00:00
2008-08-03-fabs64.ll
2008-08-03-ReturnDouble.ll
2008-08-04-Bitconvert.ll
2008-08-06-Alloca.ll
2008-08-07-CC.ll
2008-08-07-FPRound.ll
2008-08-08-bswap.ll
2008-08-08-ctlz.ll
2008-10-13-LegalizerBug.ll
2008-11-10-xint_to_fp.ll
2009-11-16-CstPoolLoad.ll
2010-07-20-Switch.ll
[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point
2014-04-14 16:00:28 +00:00
2010-11-09-CountLeading.ll
2010-11-09-Mul.ll
2011-05-26-BranchKillsVreg.ll
2012-12-12-ExpandMemcpy.ll
2013-11-18-fp64-const0.ll
[mips] Use MTHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64
2014-06-12 11:55:58 +00:00
abicalls.ll
[mips] Invert the abicalls feature bit to be noabicalls so that it's possible for -mno-abicalls to take effect.
2014-08-08 15:47:17 +00:00
abiflags32.ll
[mips] Do not emit '.module fp=...' unless we really need to.
2014-07-21 15:25:24 +00:00
abiflags-xx.ll
[mips] Expand BuildPairF64 to a spill and reload when the O32 FPXX ABI is
2014-07-14 09:40:29 +00:00
addc.ll
addi.ll
addressing-mode.ll
align16.ll
alloca16.ll
alloca.ll
analyzebranch.ll
[mips][mips64r6] Correct cond names in the cmp.cond.[ds] instructions
2014-07-09 10:40:20 +00:00
and1.ll
asm-large-immediate.ll
atomic.ll
Replace the result usages while legalizing cmpxchg.
2014-07-21 17:33:44 +00:00
atomicops.ll
IR: add "cmpxchg weak" variant to support permitted failure.
2014-06-13 14:24:07 +00:00
beqzc1.ll
beqzc.ll
biggot.ll
blez_bgez.ll
[mips] Make mips64 the default CPU for the mips64 architecture
2014-02-20 13:13:33 +00:00
blockaddr.ll
br-jmp.ll
brconeq.ll
brconeqk.ll
brconeqz.ll
brconge.ll
brcongt.ll
brconle.ll
brconlt.ll
brconne.ll
brconnek.ll
brconnez.ll
brdelayslot.ll
brind.ll
brsize3.ll
brsize3a.ll
bswap.ll
[mips] Check emitted code for llvm.bswap.i32 on MIPS16/MIPS64 and llvm.bswap.i64 on MIPS16.
2014-03-31 11:00:04 +00:00
buildpairextractelementf64.ll
[mips] Use MFHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64 moves
2014-07-14 12:41:31 +00:00
cache-intrinsic.ll
Add @llvm.clear_cache builtin
2014-03-26 12:52:28 +00:00
call-optimization.ll
cfi_offset.ll
[mips] Emit two CFI offset directives per double precision SDC1/LDC1
2014-07-10 22:23:30 +00:00
check-noat.ll
ci2.ll
cmov.ll
[SDAG] Introduce a combined set to the DAG combiner which tracks nodes
2014-07-24 22:15:28 +00:00
cmplarge.ll
const1.ll
const4a.ll
const6.ll
const6a.ll
const-mult.ll
constantfp0.ll
countleading.ll
[mips][mips64r6] Correct select patterns that have the condition or true/false values backwards
2014-07-09 10:47:26 +00:00
cprestore.ll
ctlz-v.ll
Add support for scalarizing ctlz_zero_undef
2014-07-30 00:44:03 +00:00
ctlz.ll
cttz-v.ll
Add support for scalarizing cttz_zero_undef
2014-08-10 22:49:54 +00:00
DbgValueOtherTargets.test
disable-tail-merge.ll
div_rem.ll
div.ll
divrem.ll
[mips][mips64r6] Replace m[tf]hi, m[tf]lo, mult, multu, dmult, dmultu, div, ddiv, divu, ddivu for MIPS32r6/MIPS64.
2014-06-12 10:44:10 +00:00
divu_remu.ll
divu.ll
double2int.ll
dsp-patterns-cmp-vselect.ll
dsp-patterns.ll
dsp-r1.ll
[mips][mips64r6] madd/maddu/msub/msubu are not available on MIPS32r6/MIPS64r6
2014-06-12 10:54:16 +00:00
dsp-r2.ll
dsp-vec-load-store.ll
eh-dwarf-cfa.ll
[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point
2014-04-14 16:00:28 +00:00
eh-return32.ll
[mips][mips64r6] Use JALR for returns instead of JR (which is not available on MIPS32r6/MIPS64r6)
2014-07-09 10:16:07 +00:00
eh-return64.ll
[mips][mips64r6] Use JALR for returns instead of JR (which is not available on MIPS32r6/MIPS64r6)
2014-07-09 10:16:07 +00:00
eh.ll
ehframe-indirect.ll
Fix MIPS exception personality encoding.
2014-05-30 16:48:56 +00:00
elf_eflags.ll
[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point
2014-04-14 16:00:28 +00:00
emit-big-cst.ll
ex2.ll
extins.ll
f16abs.ll
fabs.ll
Re-commit: [mips] abs.[ds], and neg.[ds] should be allowed regardless of -enable-no-nans-fp-math
2014-04-09 09:56:43 +00:00
fastcc.ll
[mips] Don't use odd-numbered float registers for double arguments for fastcc
2014-08-22 09:23:22 +00:00
fcmp.ll
Make it possible for ints/floats to return different values from getBooleanContents()
2014-07-10 10:18:12 +00:00
fcopysign-f32-f64.ll
[mips] Fix fcopysign for MIPS-IV and add the test.
2014-04-14 16:24:12 +00:00
fcopysign.ll
[mips] Use MTHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64
2014-06-12 11:55:58 +00:00
fixdfsf.ll
fmadd1.ll
[mips] Use MTHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64
2014-06-12 11:55:58 +00:00
fneg.ll
Re-commit: [mips] abs.[ds], and neg.[ds] should be allowed regardless of -enable-no-nans-fp-math
2014-04-09 09:56:43 +00:00
fp16instrinsmc.ll
Add the first backend support for on demand subtarget creation
2014-09-26 01:44:08 +00:00
fp16mix.ll
fp16static.ll
fp64a.ll
[mips] For the FP64A ABI, odd-numbered double-precision moves must not use mtc1/mfc1.
2014-07-14 13:08:14 +00:00
fp-indexed-ls.ll
[mips][mips64r6] [sl][duw]xc1 are not available on MIPS32r6/MIPS64r6
2014-06-12 14:19:28 +00:00
fp-spill-reload.ll
fpbr.ll
[mips][mips64r6] bc1[tf] are not available on MIPS32r6/MIPS64r6
2014-06-12 15:00:17 +00:00
fpneeded.ll
fpnotneeded.ll
fptr2.ll
fpxx.ll
[mips] For the FP64A ABI, odd-numbered double-precision moves must not use mtc1/mfc1.
2014-07-14 13:08:14 +00:00
frame-address.ll
frem.ll
global-address.ll
global-pointer-reg.ll
gpreg-lazy-binding.ll
gprestore.ll
helloworld.ll
hf1_body.ll
hf16_1.ll
hf16call32_body.ll
hf16call32.ll
hfptrcall.ll
Add the first backend support for on demand subtarget creation
2014-09-26 01:44:08 +00:00
i32k.ll
i64arg.ll
imm.ll
indirectcall.ll
init-array.ll
Replace -use-init-array with -use-ctors.
2014-09-02 13:54:53 +00:00
inlineasm64.ll
inlineasm_constraint.ll
[mips] Change lwl and lwr in inlineasm_constraint.ll to lw
2014-05-22 11:51:06 +00:00
inlineasm-cnstrnt-bad-I-1.ll
[mips] Use addiu in inline assembly tests since addi is not available in all ISA's
2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-bad-J.ll
[mips] Use addiu in inline assembly tests since addi is not available in all ISA's
2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-bad-K.ll
inlineasm-cnstrnt-bad-L.ll
[mips] Use addiu in inline assembly tests since addi is not available in all ISA's
2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-bad-N.ll
[mips] Use addiu in inline assembly tests since addi is not available in all ISA's
2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-bad-O.ll
[mips] Use addiu in inline assembly tests since addi is not available in all ISA's
2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-bad-P.ll
[mips] Use addiu in inline assembly tests since addi is not available in all ISA's
2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-reg64.ll
[mips] Use addiu in inline assembly tests since addi is not available in all ISA's
2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-reg.ll
[mips][mips64r6] Improve tests affected by the changes to multiplies and divides
2014-06-11 15:48:00 +00:00
inlineasm-operand-code.ll
[mips] Use addiu in inline assembly tests since addi is not available in all ISA's
2014-05-22 11:46:58 +00:00
inlineasmmemop.ll
int-to-float-conversion.ll
[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point
2014-04-14 16:00:28 +00:00
internalfunc.ll
jtstat.ll
l3mc.ll
largeimm1.ll
largeimmprinting.ll
[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point
2014-04-14 16:00:28 +00:00
lazy-binding.ll
lb1.ll
lbu1.ll
lcb2.ll
lcb3c.ll
lcb4a.ll
lcb5.ll
lh1.ll
lhu1.ll
lit.local.cfg
Reduce verbiage of lit.local.cfg files
2014-06-09 22:42:55 +00:00
llcarry.ll
load-store-left-right.ll
[mips][mips64r6] [ls][dw][lr] are not available in MIPS32r6/MIPS64r6
2014-05-23 13:18:02 +00:00
longbranch.ll
[mips] Modify long branch for NaCl:
2014-06-05 13:52:08 +00:00
machineverifier.ll
madd-msub.ll
[mips][mips64r6] madd/maddu/msub/msubu are not available on MIPS32r6/MIPS64r6
2014-06-12 10:54:16 +00:00
mature-mc-support.ll
mbrsize4a.ll
memcpy.ll
micromips-atomic.ll
micromips-directives.ll
[mips] Emit '.set nomicromips' before a function's entry label
2014-04-16 11:46:59 +00:00
micromips-jal.ll
Fixed issue with microMIPS JAL instruction.
2014-03-31 14:00:10 +00:00
micromips-load-effective-address.ll
mips16_32_1.ll
mips16_32_3.ll
mips16_32_4.ll
mips16_32_5.ll
mips16_32_6.ll
mips16_32_7.ll
mips16_32_8.ll
mips16_32_9.ll
mips16_32_10.ll
mips16_fpret.ll
mips16-hf-attr-2.ll
Add soft-float to the key for the subtarget lookup in the TargetMachine
2014-09-29 21:57:54 +00:00
mips16-hf-attr.ll
Add soft-float to the key for the subtarget lookup in the TargetMachine
2014-09-29 21:57:54 +00:00
mips16ex.ll
Print a=b as an assignment.
2014-06-24 22:45:16 +00:00
mips16fpe.ll
mips64-f128-call.ll
mips64-f128.ll
[mips][mips64r6] Correct select patterns that have the condition or true/false values backwards
2014-07-09 10:47:26 +00:00
mips64-libcall.ll
mips64-sret.ll
Allow sret on the second parameter as well as the first
2014-05-09 22:32:13 +00:00
mips64directive.ll
[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point
2014-04-14 16:00:28 +00:00
mips64ext.ll
[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point
2014-04-14 16:00:28 +00:00
mips64extins.ll
mips64fpimm0.ll
[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point
2014-04-14 16:00:28 +00:00
mips64fpldst.ll
[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point
2014-04-14 16:00:28 +00:00
mips64imm.ll
[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point
2014-04-14 16:00:28 +00:00
mips64instrs.ll
[mips][mips64r6] cl[oz], and dcl[oz] are re-encoded in MIPS32r6/MIPS64r6
2014-06-16 13:18:59 +00:00
mips64intldst.ll
[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point
2014-04-14 16:00:28 +00:00
mips64lea.ll
[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point
2014-04-14 16:00:28 +00:00
mips64muldiv.ll
[mips][mips64r6] Replace m[tf]hi, m[tf]lo, mult, multu, dmult, dmultu, div, ddiv, divu, ddivu for MIPS32r6/MIPS64.
2014-06-12 10:44:10 +00:00
mips64shift.ll
mipslopat.ll
misha.ll
mno-ldc1-sdc1.ll
[mips] Use MFHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64 moves
2014-07-14 12:41:31 +00:00
mul.ll
mulll.ll
mulull.ll
nacl-align.ll
Moved test file from test/MC/Mips to test/CodeGen/Mips.
2014-03-07 22:08:46 +00:00
nacl-branch-delay.ll
[mips] Implement NaCl sandboxing of loads, stores and SP changes:
2014-03-10 20:34:23 +00:00
nacl-reserved-regs.ll
neg1.ll
no-odd-spreg.ll
[mips] Do not emit '.module [no]oddspreg' unless we really need to.
2014-07-21 10:45:47 +00:00
nomips16.ll
Add the first backend support for on demand subtarget creation
2014-09-26 01:44:08 +00:00
not1.ll
null-streamer.ll
[Mips] Add a target streamer when creating a null streamer.
2014-06-23 19:43:40 +00:00
null.ll
o32_cc_byval.ll
o32_cc_vararg.ll
o32_cc.ll
[mips] Use MFHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64 moves
2014-07-14 12:41:31 +00:00
octeon_popcnt.ll
[mips] Improve robustness of some tests.
2014-08-14 13:10:48 +00:00
octeon.ll
[mips] Add more Octeon cnMips instructions
2014-04-02 18:40:43 +00:00
optimize-fp-math.ll
[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point
2014-04-14 16:00:28 +00:00
optimize-pic-o0.ll
Fix regression with -O0 for mips .
2014-03-10 16:31:25 +00:00
or1.ll
powif64_16.ll
prevent-hoisting.ll
Prevent hoisting the instruction whose def might be clobbered by the terminator.
2014-06-05 13:42:48 +00:00
private.ll
ra-allocatable.ll
rdhwr-directives.ll
rem.ll
remat-immed-load.ll
[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point
2014-04-14 16:00:28 +00:00
remu.ll
return_address.ll
return-vector.ll
rotate.ll
s2rem.ll
sb1.ll
sel1c.ll
sel2c.ll
select.ll
Make it possible for ints/floats to return different values from getBooleanContents()
2014-07-10 10:18:12 +00:00
selectcc.ll
[mips][mips64r6] c.cond.fmt, mov[fntz], and mov[fntz].[ds] are not available on MIPS32r6/MIPS64r6
2014-06-12 13:39:06 +00:00
seleq.ll
Add the first backend support for on demand subtarget creation
2014-09-26 01:44:08 +00:00
seleqk.ll
selgek.ll
selgt.ll
selle.ll
selltk.ll
selne.ll
selnek.ll
selpat.ll
selTBteqzCmpi.ll
selTBtnezCmpi.ll
selTBtnezSlti.ll
setcc-se.ll
seteq.ll
seteqz.ll
setge.ll
setgek.ll
setle.ll
setlt.ll
setltk.ll
setne.ll
setuge.ll
setugt.ll
setule.ll
setult.ll
setultk.ll
sh1.ll
shift-parts.ll
simplebr.ll
sint-fp-store_pattern.ll
[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point
2014-04-14 16:00:28 +00:00
sitofp-selectcc-opt.ll
sll1.ll
sll2.ll
small-section-reserve-gp.ll
spill-copy-acreg.ll
sr1.ll
sra1.ll
sra2.ll
srl1.ll
srl2.ll
stack-alignment.ll
stackcoloring.ll
stacksize.ll
start-asm-file.ll
[mips] Remove reason for XFAIL from a test that isn't actually XFAILed.
2014-08-08 12:58:17 +00:00
stchar.ll
stldst.ll
sub1.ll
sub2.ll
swzero.ll
tail16.ll
tailcall.ll
tls16_2.ll
tls16.ll
tls-alias.ll
[pr19844] Add thread local mode to aliases.
2014-05-28 18:15:43 +00:00
tls-models.ll
tls.ll
tnaked.ll
trap1.ll
trap.ll
uitofp.ll
ul1.ll
unalignedload.ll
[mips][mips64r6] [ls][dw][lr] are not available in MIPS32r6/MIPS64r6
2014-05-23 13:18:02 +00:00
vector-load-store.ll
vector-setcc.ll
weak.ll
xor1.ll
zeroreg.ll
[mips][mips64r6] c.cond.fmt, mov[fntz], and mov[fntz].[ds] are not available on MIPS32r6/MIPS64r6
2014-06-12 13:39:06 +00:00
