llvm-6502/lib/Target/PowerPC/PPCInstrInfo.td

1645 lines
73 KiB
TableGen
Raw Normal View History

//===-- PPCInstrInfo.td - The PowerPC Instruction Set ------*- tablegen -*-===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file describes the subset of the 32-bit PowerPC instruction set, as used
// by the PowerPC instruction selector.
//
//===----------------------------------------------------------------------===//
include "PPCInstrFormats.td"
//===----------------------------------------------------------------------===//
// PowerPC specific type constraints.
//
def SDT_PPCstfiwx : SDTypeProfile<0, 2, [ // stfiwx
SDTCisVT<0, f64>, SDTCisPtrTy<1>
]>;
def SDT_PPCCallSeqStart : SDCallSeqStart<[ SDTCisVT<0, i32> ]>;
def SDT_PPCCallSeqEnd : SDCallSeqEnd<[ SDTCisVT<0, i32>,
SDTCisVT<1, i32> ]>;
def SDT_PPCvperm : SDTypeProfile<1, 3, [
SDTCisVT<3, v16i8>, SDTCisSameAs<0, 1>, SDTCisSameAs<0, 2>
]>;
def SDT_PPCvcmp : SDTypeProfile<1, 3, [
SDTCisSameAs<0, 1>, SDTCisSameAs<1, 2>, SDTCisVT<3, i32>
]>;
def SDT_PPCcondbr : SDTypeProfile<0, 3, [
SDTCisVT<0, i32>, SDTCisVT<2, OtherVT>
]>;
def SDT_PPClbrx : SDTypeProfile<1, 2, [
SDTCisVT<0, i32>, SDTCisPtrTy<1>, SDTCisVT<2, OtherVT>
]>;
def SDT_PPCstbrx : SDTypeProfile<0, 3, [
SDTCisVT<0, i32>, SDTCisPtrTy<1>, SDTCisVT<2, OtherVT>
]>;
def SDT_PPClarx : SDTypeProfile<1, 1, [
SDTCisInt<0>, SDTCisPtrTy<1>
]>;
def SDT_PPCstcx : SDTypeProfile<0, 2, [
SDTCisInt<0>, SDTCisPtrTy<1>
]>;
def SDT_PPCTC_ret : SDTypeProfile<0, 2, [
SDTCisPtrTy<0>, SDTCisVT<1, i32>
]>;
//===----------------------------------------------------------------------===//
// PowerPC specific DAG Nodes.
//
def PPCfcfid : SDNode<"PPCISD::FCFID" , SDTFPUnaryOp, []>;
def PPCfctidz : SDNode<"PPCISD::FCTIDZ", SDTFPUnaryOp, []>;
def PPCfctiwz : SDNode<"PPCISD::FCTIWZ", SDTFPUnaryOp, []>;
def PPCstfiwx : SDNode<"PPCISD::STFIWX", SDT_PPCstfiwx,
[SDNPHasChain, SDNPMayStore]>;
// This sequence is used for long double->int conversions. It changes the
// bits in the FPSCR which is not modelled.
def PPCmffs : SDNode<"PPCISD::MFFS", SDTypeProfile<1, 0, [SDTCisVT<0, f64>]>,
[SDNPOutGlue]>;
def PPCmtfsb0 : SDNode<"PPCISD::MTFSB0", SDTypeProfile<0, 1, [SDTCisInt<0>]>,
[SDNPInGlue, SDNPOutGlue]>;
def PPCmtfsb1 : SDNode<"PPCISD::MTFSB1", SDTypeProfile<0, 1, [SDTCisInt<0>]>,
[SDNPInGlue, SDNPOutGlue]>;
def PPCfaddrtz: SDNode<"PPCISD::FADDRTZ", SDTFPBinOp,
[SDNPInGlue, SDNPOutGlue]>;
def PPCmtfsf : SDNode<"PPCISD::MTFSF", SDTypeProfile<1, 3,
[SDTCisVT<0, f64>, SDTCisInt<1>, SDTCisVT<2, f64>,
SDTCisVT<3, f64>]>,
[SDNPInGlue]>;
def PPCfsel : SDNode<"PPCISD::FSEL",
// Type constraint for fsel.
SDTypeProfile<1, 3, [SDTCisSameAs<0, 2>, SDTCisSameAs<0, 3>,
SDTCisFP<0>, SDTCisVT<1, f64>]>, []>;
def PPChi : SDNode<"PPCISD::Hi", SDTIntBinOp, []>;
def PPClo : SDNode<"PPCISD::Lo", SDTIntBinOp, []>;
def PPCtoc_entry: SDNode<"PPCISD::TOC_ENTRY", SDTIntBinOp, [SDNPMayLoad]>;
def PPCvmaddfp : SDNode<"PPCISD::VMADDFP", SDTFPTernaryOp, []>;
def PPCvnmsubfp : SDNode<"PPCISD::VNMSUBFP", SDTFPTernaryOp, []>;
def PPCaddisGotTprelHA : SDNode<"PPCISD::ADDIS_GOT_TPREL_HA", SDTIntBinOp>;
def PPCldGotTprelL : SDNode<"PPCISD::LD_GOT_TPREL_L", SDTIntBinOp,
[SDNPMayLoad]>;
def PPCaddTls : SDNode<"PPCISD::ADD_TLS", SDTIntBinOp, []>;
This patch implements the general dynamic TLS model for 64-bit PowerPC. Given a thread-local symbol x with global-dynamic access, the generated code to obtain x's address is: Instruction Relocation Symbol addis ra,r2,x@got@tlsgd@ha R_PPC64_GOT_TLSGD16_HA x addi r3,ra,x@got@tlsgd@l R_PPC64_GOT_TLSGD16_L x bl __tls_get_addr(x@tlsgd) R_PPC64_TLSGD x R_PPC64_REL24 __tls_get_addr nop <use address in r3> The implementation borrows from the medium code model work for introducing special forms of ADDIS and ADDI into the DAG representation. This is made slightly more complicated by having to introduce a call to the external function __tls_get_addr. Using the full call machinery is overkill and, more importantly, makes it difficult to add a special relocation. So I've introduced another opcode GET_TLS_ADDR to represent the function call, and surrounded it with register copies to set up the parameter and return value. Most of the code is pretty straightforward. I ran into one peculiarity when I introduced a new PPC opcode BL8_NOP_ELF_TLSGD, which is just like BL8_NOP_ELF except that it takes another parameter to represent the symbol ("x" above) that requires a relocation on the call. Something in the TblGen machinery causes BL8_NOP_ELF and BL8_NOP_ELF_TLSGD to be treated identically during the emit phase, so this second operand was never visited to generate relocations. This is the reason for the slightly messy workaround in PPCMCCodeEmitter.cpp:getDirectBrEncoding(). Two new tests are included to demonstrate correct external assembly and correct generation of relocations using the integrated assembler. Comments welcome! Thanks, Bill git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169910 91177308-0d34-0410-b5e6-96231b3b80d8
2012-12-11 20:30:11 +00:00
def PPCaddisTlsgdHA : SDNode<"PPCISD::ADDIS_TLSGD_HA", SDTIntBinOp>;
def PPCaddiTlsgdL : SDNode<"PPCISD::ADDI_TLSGD_L", SDTIntBinOp>;
def PPCgetTlsAddr : SDNode<"PPCISD::GET_TLS_ADDR", SDTIntBinOp>;
def PPCaddisTlsldHA : SDNode<"PPCISD::ADDIS_TLSLD_HA", SDTIntBinOp>;
def PPCaddiTlsldL : SDNode<"PPCISD::ADDI_TLSLD_L", SDTIntBinOp>;
def PPCgetTlsldAddr : SDNode<"PPCISD::GET_TLSLD_ADDR", SDTIntBinOp>;
def PPCaddisDtprelHA : SDNode<"PPCISD::ADDIS_DTPREL_HA", SDTIntBinOp,
[SDNPHasChain]>;
def PPCaddiDtprelL : SDNode<"PPCISD::ADDI_DTPREL_L", SDTIntBinOp>;
def PPCvperm : SDNode<"PPCISD::VPERM", SDT_PPCvperm, []>;
// These nodes represent the 32-bit PPC shifts that operate on 6-bit shift
// amounts. These nodes are generated by the multi-precision shift code.
def PPCsrl : SDNode<"PPCISD::SRL" , SDTIntShiftOp>;
def PPCsra : SDNode<"PPCISD::SRA" , SDTIntShiftOp>;
def PPCshl : SDNode<"PPCISD::SHL" , SDTIntShiftOp>;
def PPCextsw_32 : SDNode<"PPCISD::EXTSW_32" , SDTIntUnaryOp>;
def PPCstd_32 : SDNode<"PPCISD::STD_32" , SDTStore,
[SDNPHasChain, SDNPMayStore]>;
// These are target-independent nodes, but have target-specific formats.
def callseq_start : SDNode<"ISD::CALLSEQ_START", SDT_PPCCallSeqStart,
[SDNPHasChain, SDNPOutGlue]>;
def callseq_end : SDNode<"ISD::CALLSEQ_END", SDT_PPCCallSeqEnd,
[SDNPHasChain, SDNPOptInGlue, SDNPOutGlue]>;
def SDT_PPCCall : SDTypeProfile<0, -1, [SDTCisInt<0>]>;
def PPCcall : SDNode<"PPCISD::CALL", SDT_PPCCall,
[SDNPHasChain, SDNPOptInGlue, SDNPOutGlue,
SDNPVariadic]>;
def PPCcall_nop : SDNode<"PPCISD::CALL_NOP", SDT_PPCCall,
[SDNPHasChain, SDNPOptInGlue, SDNPOutGlue,
SDNPVariadic]>;
def PPCload : SDNode<"PPCISD::LOAD", SDTypeProfile<1, 1, []>,
[SDNPHasChain, SDNPOptInGlue, SDNPOutGlue]>;
def PPCload_toc : SDNode<"PPCISD::LOAD_TOC", SDTypeProfile<0, 1, []>,
[SDNPHasChain, SDNPSideEffect,
SDNPInGlue, SDNPOutGlue]>;
def PPCtoc_restore : SDNode<"PPCISD::TOC_RESTORE", SDTypeProfile<0, 0, []>,
[SDNPHasChain, SDNPSideEffect,
SDNPInGlue, SDNPOutGlue]>;
def PPCmtctr : SDNode<"PPCISD::MTCTR", SDT_PPCCall,
[SDNPHasChain, SDNPOptInGlue, SDNPOutGlue]>;
def PPCbctrl : SDNode<"PPCISD::BCTRL", SDTNone,
[SDNPHasChain, SDNPOptInGlue, SDNPOutGlue,
SDNPVariadic]>;
def retflag : SDNode<"PPCISD::RET_FLAG", SDTNone,
[SDNPHasChain, SDNPOptInGlue, SDNPVariadic]>;
def PPCtc_return : SDNode<"PPCISD::TC_RETURN", SDT_PPCTC_ret,
[SDNPHasChain, SDNPOptInGlue, SDNPVariadic]>;
def PPCeh_sjlj_setjmp : SDNode<"PPCISD::EH_SJLJ_SETJMP",
SDTypeProfile<1, 1, [SDTCisInt<0>,
SDTCisPtrTy<1>]>,
[SDNPHasChain, SDNPSideEffect]>;
def PPCeh_sjlj_longjmp : SDNode<"PPCISD::EH_SJLJ_LONGJMP",
SDTypeProfile<0, 1, [SDTCisPtrTy<0>]>,
[SDNPHasChain, SDNPSideEffect]>;
def PPCvcmp : SDNode<"PPCISD::VCMP" , SDT_PPCvcmp, []>;
def PPCvcmp_o : SDNode<"PPCISD::VCMPo", SDT_PPCvcmp, [SDNPOutGlue]>;
def PPCcondbranch : SDNode<"PPCISD::COND_BRANCH", SDT_PPCcondbr,
[SDNPHasChain, SDNPOptInGlue]>;
def PPClbrx : SDNode<"PPCISD::LBRX", SDT_PPClbrx,
[SDNPHasChain, SDNPMayLoad]>;
def PPCstbrx : SDNode<"PPCISD::STBRX", SDT_PPCstbrx,
[SDNPHasChain, SDNPMayStore]>;
// Instructions to set/unset CR bit 6 for SVR4 vararg calls
def PPCcr6set : SDNode<"PPCISD::CR6SET", SDTNone,
[SDNPHasChain, SDNPOptInGlue, SDNPOutGlue]>;
def PPCcr6unset : SDNode<"PPCISD::CR6UNSET", SDTNone,
[SDNPHasChain, SDNPOptInGlue, SDNPOutGlue]>;
// Instructions to support atomic operations
def PPClarx : SDNode<"PPCISD::LARX", SDT_PPClarx,
[SDNPHasChain, SDNPMayLoad]>;
def PPCstcx : SDNode<"PPCISD::STCX", SDT_PPCstcx,
[SDNPHasChain, SDNPMayStore]>;
// Instructions to support medium and large code model
This patch implements medium code model support for 64-bit PowerPC. The default for 64-bit PowerPC is small code model, in which TOC entries must be addressable using a 16-bit offset from the TOC pointer. Additionally, only TOC entries are addressed via the TOC pointer. With medium code model, TOC entries and data sections can all be addressed via the TOC pointer using a 32-bit offset. Cooperation with the linker allows 16-bit offsets to be used when these are sufficient, reducing the number of extra instructions that need to be executed. Medium code model also does not generate explicit TOC entries in ".section toc" for variables that are wholly internal to the compilation unit. Consider a load of an external 4-byte integer. With small code model, the compiler generates: ld 3, .LC1@toc(2) lwz 4, 0(3) .section .toc,"aw",@progbits .LC1: .tc ei[TC],ei With medium model, it instead generates: addis 3, 2, .LC1@toc@ha ld 3, .LC1@toc@l(3) lwz 4, 0(3) .section .toc,"aw",@progbits .LC1: .tc ei[TC],ei Here .LC1@toc@ha is a relocation requesting the upper 16 bits of the 32-bit offset of ei's TOC entry from the TOC base pointer. Similarly, .LC1@toc@l is a relocation requesting the lower 16 bits. Note that if the linker determines that ei's TOC entry is within a 16-bit offset of the TOC base pointer, it will replace the "addis" with a "nop", and replace the "ld" with the identical "ld" instruction from the small code model example. Consider next a load of a function-scope static integer. For small code model, the compiler generates: ld 3, .LC1@toc(2) lwz 4, 0(3) .section .toc,"aw",@progbits .LC1: .tc test_fn_static.si[TC],test_fn_static.si .type test_fn_static.si,@object .local test_fn_static.si .comm test_fn_static.si,4,4 For medium code model, the compiler generates: addis 3, 2, test_fn_static.si@toc@ha addi 3, 3, test_fn_static.si@toc@l lwz 4, 0(3) .type test_fn_static.si,@object .local test_fn_static.si .comm test_fn_static.si,4,4 Again, the linker may replace the "addis" with a "nop", calculating only a 16-bit offset when this is sufficient. Note that it would be more efficient for the compiler to generate: addis 3, 2, test_fn_static.si@toc@ha lwz 4, test_fn_static.si@toc@l(3) The current patch does not perform this optimization yet. This will be addressed as a peephole optimization in a later patch. For the moment, the default code model for 64-bit PowerPC will remain the small code model. We plan to eventually change the default to medium code model, which matches current upstream GCC behavior. Note that the different code models are ABI-compatible, so code compiled with different models will be linked and execute correctly. I've tested the regression suite and the application/benchmark test suite in two ways: Once with the patch as submitted here, and once with additional logic to force medium code model as the default. The tests all compile cleanly, with one exception. The mandel-2 application test fails due to an unrelated ABI compatibility with passing complex numbers. It just so happens that small code model was incredibly lucky, in that temporary values in floating-point registers held the expected values needed by the external library routine that was called incorrectly. My current thought is to correct the ABI problems with _Complex before making medium code model the default, to avoid introducing this "regression." Here are a few comments on how the patch works, since the selection code can be difficult to follow: The existing logic for small code model defines three pseudo-instructions: LDtoc for most uses, LDtocJTI for jump table addresses, and LDtocCPT for constant pool addresses. These are expanded by SelectCodeCommon(). The pseudo-instruction approach doesn't work for medium code model, because we need to generate two instructions when we match the same pattern. Instead, new logic in PPCDAGToDAGISel::Select() intercepts the TOC_ENTRY node for medium code model, and generates an ADDIStocHA followed by either a LDtocL or an ADDItocL. These new node types correspond naturally to the sequences described above. The addis/ld sequence is generated for the following cases: * Jump table addresses * Function addresses * External global variables * Tentative definitions of global variables (common linkage) The addis/addi sequence is generated for the following cases: * Constant pool entries * File-scope static global variables * Function-scope static variables Expanding to the two-instruction sequences at select time exposes the instructions to subsequent optimization, particularly scheduling. The rest of the processing occurs at assembly time, in PPCAsmPrinter::EmitInstruction. Each of the instructions is converted to a "real" PowerPC instruction. When a TOC entry needs to be created, this is done here in the same manner as for the existing LDtoc, LDtocJTI, and LDtocCPT pseudo-instructions (I factored out a new routine to handle this). I had originally thought that if a TOC entry was needed for LDtocL or ADDItocL, it would already have been generated for the previous ADDIStocHA. However, at higher optimization levels, the ADDIStocHA may appear in a different block, which may be assembled textually following the block containing the LDtocL or ADDItocL. So it is necessary to include the possibility of creating a new TOC entry for those two instructions. Note that for LDtocL, we generate a new form of LD called LDrs. This allows specifying the @toc@l relocation for the offset field of the LD instruction (i.e., the offset is replaced by a SymbolLo relocation). When the peephole optimization described above is added, we will need to do similar things for all immediate-form load and store operations. The seven "mcm-n.ll" test cases are kept separate because otherwise the intermingling of various TOC entries and so forth makes the tests fragile and hard to understand. The above assumes use of an external assembler. For use of the integrated assembler, new relocations are added and used by PPCELFObjectWriter. Testing is done with "mcm-obj.ll", which tests for proper generation of the various relocations for the same sequences tested with the external assembler. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168708 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-27 17:35:46 +00:00
def PPCaddisTocHA : SDNode<"PPCISD::ADDIS_TOC_HA", SDTIntBinOp, []>;
def PPCldTocL : SDNode<"PPCISD::LD_TOC_L", SDTIntBinOp, [SDNPMayLoad]>;
def PPCaddiTocL : SDNode<"PPCISD::ADDI_TOC_L", SDTIntBinOp, []>;
// Instructions to support dynamic alloca.
def SDTDynOp : SDTypeProfile<1, 2, []>;
def PPCdynalloc : SDNode<"PPCISD::DYNALLOC", SDTDynOp, [SDNPHasChain]>;
//===----------------------------------------------------------------------===//
// PowerPC specific transformation functions and pattern fragments.
//
def SHL32 : SDNodeXForm<imm, [{
// Transformation function: 31 - imm
return getI32Imm(31 - N->getZExtValue());
}]>;
def SRL32 : SDNodeXForm<imm, [{
// Transformation function: 32 - imm
return N->getZExtValue() ? getI32Imm(32 - N->getZExtValue()) : getI32Imm(0);
}]>;
def LO16 : SDNodeXForm<imm, [{
// Transformation function: get the low 16 bits.
return getI32Imm((unsigned short)N->getZExtValue());
}]>;
def HI16 : SDNodeXForm<imm, [{
// Transformation function: shift the immediate value down into the low bits.
return getI32Imm((unsigned)N->getZExtValue() >> 16);
}]>;
def HA16 : SDNodeXForm<imm, [{
// Transformation function: shift the immediate value down into the low bits.
signed int Val = N->getZExtValue();
return getI32Imm((Val - (signed short)Val) >> 16);
}]>;
def MB : SDNodeXForm<imm, [{
// Transformation function: get the start bit of a mask
unsigned mb = 0, me;
(void)isRunOfOnes((unsigned)N->getZExtValue(), mb, me);
return getI32Imm(mb);
}]>;
def ME : SDNodeXForm<imm, [{
// Transformation function: get the end bit of a mask
unsigned mb, me = 0;
(void)isRunOfOnes((unsigned)N->getZExtValue(), mb, me);
return getI32Imm(me);
}]>;
def maskimm32 : PatLeaf<(imm), [{
// maskImm predicate - True if immediate is a run of ones.
unsigned mb, me;
if (N->getValueType(0) == MVT::i32)
return isRunOfOnes((unsigned)N->getZExtValue(), mb, me);
else
return false;
}]>;
def immSExt16 : PatLeaf<(imm), [{
// immSExt16 predicate - True if the immediate fits in a 16-bit sign extended
// field. Used by instructions like 'addi'.
if (N->getValueType(0) == MVT::i32)
return (int32_t)N->getZExtValue() == (short)N->getZExtValue();
else
return (int64_t)N->getZExtValue() == (short)N->getZExtValue();
}]>;
def immZExt16 : PatLeaf<(imm), [{
// immZExt16 predicate - True if the immediate fits in a 16-bit zero extended
// field. Used by instructions like 'ori'.
return (uint64_t)N->getZExtValue() == (unsigned short)N->getZExtValue();
}], LO16>;
// imm16Shifted* - These match immediates where the low 16-bits are zero. There
// are two forms: imm16ShiftedSExt and imm16ShiftedZExt. These two forms are
// identical in 32-bit mode, but in 64-bit mode, they return true if the
// immediate fits into a sign/zero extended 32-bit immediate (with the low bits
// clear).
def imm16ShiftedZExt : PatLeaf<(imm), [{
// imm16ShiftedZExt predicate - True if only bits in the top 16-bits of the
// immediate are set. Used by instructions like 'xoris'.
return (N->getZExtValue() & ~uint64_t(0xFFFF0000)) == 0;
}], HI16>;
def imm16ShiftedSExt : PatLeaf<(imm), [{
// imm16ShiftedSExt predicate - True if only bits in the top 16-bits of the
// immediate are set. Used by instructions like 'addis'. Identical to
// imm16ShiftedZExt in 32-bit mode.
if (N->getZExtValue() & 0xFFFF) return false;
if (N->getValueType(0) == MVT::i32)
return true;
// For 64-bit, make sure it is sext right.
return N->getZExtValue() == (uint64_t)(int)N->getZExtValue();
}], HI16>;
// Some r+i load/store instructions (such as LD, STD, LDU, etc.) that require
// restricted memrix (offset/4) constants are alignment sensitive. If these
// offsets are hidden behind TOC entries than the values of the lower-order
// bits cannot be checked directly. As a result, we need to also incorporate
// an alignment check into the relevant patterns.
def aligned4load : PatFrag<(ops node:$ptr), (load node:$ptr), [{
return cast<LoadSDNode>(N)->getAlignment() >= 4;
}]>;
def aligned4store : PatFrag<(ops node:$val, node:$ptr),
(store node:$val, node:$ptr), [{
return cast<StoreSDNode>(N)->getAlignment() >= 4;
}]>;
def aligned4sextloadi32 : PatFrag<(ops node:$ptr), (sextloadi32 node:$ptr), [{
return cast<LoadSDNode>(N)->getAlignment() >= 4;
}]>;
def aligned4pre_store : PatFrag<
(ops node:$val, node:$base, node:$offset),
(pre_store node:$val, node:$base, node:$offset), [{
return cast<StoreSDNode>(N)->getAlignment() >= 4;
}]>;
def unaligned4load : PatFrag<(ops node:$ptr), (load node:$ptr), [{
return cast<LoadSDNode>(N)->getAlignment() < 4;
}]>;
def unaligned4store : PatFrag<(ops node:$val, node:$ptr),
(store node:$val, node:$ptr), [{
return cast<StoreSDNode>(N)->getAlignment() < 4;
}]>;
def unaligned4sextloadi32 : PatFrag<(ops node:$ptr), (sextloadi32 node:$ptr), [{
return cast<LoadSDNode>(N)->getAlignment() < 4;
}]>;
//===----------------------------------------------------------------------===//
// PowerPC Flag Definitions.
class isPPC64 { bit PPC64 = 1; }
class isDOT {
list<Register> Defs = [CR0];
bit RC = 1;
}
class RegConstraint<string C> {
string Constraints = C;
}
class NoEncode<string E> {
string DisableEncoding = E;
}
//===----------------------------------------------------------------------===//
// PowerPC Operand Definitions.
def s5imm : Operand<i32> {
let PrintMethod = "printS5ImmOperand";
}
def u5imm : Operand<i32> {
let PrintMethod = "printU5ImmOperand";
}
def u6imm : Operand<i32> {
let PrintMethod = "printU6ImmOperand";
}
def s16imm : Operand<i32> {
let PrintMethod = "printS16ImmOperand";
}
def u16imm : Operand<i32> {
let PrintMethod = "printU16ImmOperand";
}
def directbrtarget : Operand<OtherVT> {
let PrintMethod = "printBranchOperand";
let EncoderMethod = "getDirectBrEncoding";
}
def condbrtarget : Operand<OtherVT> {
let PrintMethod = "printBranchOperand";
let EncoderMethod = "getCondBrEncoding";
}
def calltarget : Operand<iPTR> {
let EncoderMethod = "getDirectBrEncoding";
}
def aaddr : Operand<iPTR> {
let PrintMethod = "printAbsAddrOperand";
}
def symbolHi: Operand<i32> {
let PrintMethod = "printSymbolHi";
let EncoderMethod = "getHA16Encoding";
}
def symbolLo: Operand<i32> {
let PrintMethod = "printSymbolLo";
let EncoderMethod = "getLO16Encoding";
}
def crbitm: Operand<i8> {
let PrintMethod = "printcrbitm";
let EncoderMethod = "get_crbitm_encoding";
}
// Address operands
// A version of ptr_rc which excludes R0 (or X0 in 64-bit mode).
def ptr_rc_nor0 : PointerLikeRegClass<1>;
def memri : Operand<iPTR> {
let PrintMethod = "printMemRegImm";
let MIOperandInfo = (ops symbolLo:$imm, ptr_rc_nor0:$reg);
let EncoderMethod = "getMemRIEncoding";
}
def memrr : Operand<iPTR> {
let PrintMethod = "printMemRegReg";
let MIOperandInfo = (ops ptr_rc_nor0:$ptrreg, ptr_rc:$offreg);
}
def memrix : Operand<iPTR> { // memri where the imm is shifted 2 bits.
let PrintMethod = "printMemRegImmShifted";
let MIOperandInfo = (ops symbolLo:$imm, ptr_rc_nor0:$reg);
let EncoderMethod = "getMemRIXEncoding";
}
// A single-register address. This is used with the SjLj
// pseudo-instructions.
def memr : Operand<iPTR> {
let MIOperandInfo = (ops ptr_rc:$ptrreg);
}
// PowerPC Predicate operand. 20 = (0<<5)|20 = always, CR0 is a dummy reg
// that doesn't matter.
def pred : PredicateOperand<OtherVT, (ops imm, CRRC),
(ops (i32 20), (i32 zero_reg))> {
let PrintMethod = "printPredicateOperand";
}
// Define PowerPC specific addressing mode.
def iaddr : ComplexPattern<iPTR, 2, "SelectAddrImm", [], []>;
def xaddr : ComplexPattern<iPTR, 2, "SelectAddrIdx", [], []>;
def xoaddr : ComplexPattern<iPTR, 2, "SelectAddrIdxOnly",[], []>;
def ixaddr : ComplexPattern<iPTR, 2, "SelectAddrImmShift", [], []>; // "std"
// The address in a single register. This is used with the SjLj
// pseudo-instructions.
def addr : ComplexPattern<iPTR, 1, "SelectAddr",[], []>;
/// This is just the offset part of iaddr, used for preinc.
def iaddroff : ComplexPattern<iPTR, 1, "SelectAddrImmOffs", [], []>;
//===----------------------------------------------------------------------===//
// PowerPC Instruction Predicate Definitions.
def In32BitMode : Predicate<"!PPCSubTarget.isPPC64()">;
def In64BitMode : Predicate<"PPCSubTarget.isPPC64()">;
def IsBookE : Predicate<"PPCSubTarget.isBookE()">;
//===----------------------------------------------------------------------===//
// PowerPC Instruction Definitions.
// Pseudo-instructions:
let hasCtrlDep = 1 in {
let Defs = [R1], Uses = [R1] in {
def ADJCALLSTACKDOWN : Pseudo<(outs), (ins u16imm:$amt), "#ADJCALLSTACKDOWN $amt",
[(callseq_start timm:$amt)]>;
def ADJCALLSTACKUP : Pseudo<(outs), (ins u16imm:$amt1, u16imm:$amt2), "#ADJCALLSTACKUP $amt1 $amt2",
[(callseq_end timm:$amt1, timm:$amt2)]>;
}
def UPDATE_VRSAVE : Pseudo<(outs GPRC:$rD), (ins GPRC:$rS),
"UPDATE_VRSAVE $rD, $rS", []>;
}
let Defs = [R1], Uses = [R1] in
def DYNALLOC : Pseudo<(outs GPRC:$result), (ins GPRC:$negsize, memri:$fpsi), "#DYNALLOC",
[(set i32:$result,
(PPCdynalloc i32:$negsize, iaddr:$fpsi))]>;
// SELECT_CC_* - Used to implement the SELECT_CC DAG operation. Expanded after
// instruction selection into a branch sequence.
let usesCustomInserter = 1, // Expanded after instruction selection.
PPC970_Single = 1 in {
def SELECT_CC_I4 : Pseudo<(outs GPRC:$dst), (ins CRRC:$cond, GPRC:$T, GPRC:$F,
i32imm:$BROPC), "#SELECT_CC_I4",
[]>;
def SELECT_CC_I8 : Pseudo<(outs G8RC:$dst), (ins CRRC:$cond, G8RC:$T, G8RC:$F,
i32imm:$BROPC), "#SELECT_CC_I8",
[]>;
def SELECT_CC_F4 : Pseudo<(outs F4RC:$dst), (ins CRRC:$cond, F4RC:$T, F4RC:$F,
i32imm:$BROPC), "#SELECT_CC_F4",
[]>;
def SELECT_CC_F8 : Pseudo<(outs F8RC:$dst), (ins CRRC:$cond, F8RC:$T, F8RC:$F,
i32imm:$BROPC), "#SELECT_CC_F8",
[]>;
def SELECT_CC_VRRC: Pseudo<(outs VRRC:$dst), (ins CRRC:$cond, VRRC:$T, VRRC:$F,
i32imm:$BROPC), "#SELECT_CC_VRRC",
[]>;
}
// SPILL_CR - Indicate that we're dumping the CR register, so we'll need to
// scavenge a register for it.
let mayStore = 1 in
def SPILL_CR : Pseudo<(outs), (ins CRRC:$cond, memri:$F),
"#SPILL_CR", []>;
// RESTORE_CR - Indicate that we're restoring the CR register (previously
// spilled), so we'll need to scavenge a register for it.
let mayLoad = 1 in
def RESTORE_CR : Pseudo<(outs CRRC:$cond), (ins memri:$F),
"#RESTORE_CR", []>;
let isTerminator = 1, isBarrier = 1, PPC970_Unit = 7 in {
let isCodeGenOnly = 1, isReturn = 1, Uses = [LR, RM] in
def BLR : XLForm_2_br<19, 16, 0, (outs), (ins pred:$p),
"b${p:cc}lr ${p:reg}", BrB,
[(retflag)]>;
let isBranch = 1, isIndirectBranch = 1, Uses = [CTR] in
def BCTR : XLForm_2_ext<19, 528, 20, 0, 0, (outs), (ins), "bctr", BrB, []>;
}
let Defs = [LR] in
def MovePCtoLR : Pseudo<(outs), (ins), "#MovePCtoLR", []>,
PPC970_Unit_BRU;
let isBranch = 1, isTerminator = 1, hasCtrlDep = 1, PPC970_Unit = 7 in {
let isBarrier = 1 in {
def B : IForm<18, 0, 0, (outs), (ins directbrtarget:$dst),
"b $dst", BrB,
[(br bb:$dst)]>;
}
// BCC represents an arbitrary conditional branch on a predicate.
// FIXME: should be able to write a pattern for PPCcondbranch, but can't use
// a two-value operand where a dag node expects two operands. :(
let isCodeGenOnly = 1 in
def BCC : BForm<16, 0, 0, (outs), (ins pred:$cond, condbrtarget:$dst),
"b${cond:cc} ${cond:reg}, $dst"
/*[(PPCcondbranch CRRC:$crS, imm:$opc, bb:$dst)]*/>;
let Defs = [CTR], Uses = [CTR] in {
def BDZ : BForm_1<16, 18, 0, 0, (outs), (ins condbrtarget:$dst),
"bdz $dst">;
def BDNZ : BForm_1<16, 16, 0, 0, (outs), (ins condbrtarget:$dst),
"bdnz $dst">;
}
}
// The direct BCL used by the SjLj setjmp code.
let isCall = 1, hasCtrlDep = 1, PPC970_Unit = 7 in {
let Defs = [LR], Uses = [RM] in {
def BCL : BForm_2<16, 20, 31, 0, 1, (outs), (ins condbrtarget:$dst),
"bcl 20, 31, $dst">;
}
}
let isCall = 1, PPC970_Unit = 7, Defs = [LR] in {
// Convenient aliases for call instructions
let Uses = [RM] in {
def BL : IForm<18, 0, 1, (outs), (ins calltarget:$func),
"bl $func", BrB, []>; // See Pat patterns below.
def BLA : IForm<18, 1, 1, (outs), (ins aaddr:$func),
"bla $func", BrB, [(PPCcall (i32 imm:$func))]>;
}
let Uses = [CTR, RM] in {
def BCTRL : XLForm_2_ext<19, 528, 20, 0, 1, (outs), (ins),
"bctrl", BrB, [(PPCbctrl)]>,
Requires<[In32BitMode]>;
}
}
let isCall = 1, isTerminator = 1, isReturn = 1, isBarrier = 1, Uses = [RM] in
def TCRETURNdi :Pseudo< (outs),
(ins calltarget:$dst, i32imm:$offset),
"#TC_RETURNd $dst $offset",
[]>;
let isCall = 1, isTerminator = 1, isReturn = 1, isBarrier = 1, Uses = [RM] in
def TCRETURNai :Pseudo<(outs), (ins aaddr:$func, i32imm:$offset),
"#TC_RETURNa $func $offset",
[(PPCtc_return (i32 imm:$func), imm:$offset)]>;
let isCall = 1, isTerminator = 1, isReturn = 1, isBarrier = 1, Uses = [RM] in
def TCRETURNri : Pseudo<(outs), (ins CTRRC:$dst, i32imm:$offset),
"#TC_RETURNr $dst $offset",
[]>;
let isTerminator = 1, isBarrier = 1, PPC970_Unit = 7, isBranch = 1,
isIndirectBranch = 1, isCall = 1, isReturn = 1, Uses = [CTR, RM] in
def TAILBCTR : XLForm_2_ext<19, 528, 20, 0, 0, (outs), (ins), "bctr", BrB, []>,
Requires<[In32BitMode]>;
let isBranch = 1, isTerminator = 1, hasCtrlDep = 1, PPC970_Unit = 7,
isBarrier = 1, isCall = 1, isReturn = 1, Uses = [RM] in
def TAILB : IForm<18, 0, 0, (outs), (ins calltarget:$dst),
"b $dst", BrB,
[]>;
let isBranch = 1, isTerminator = 1, hasCtrlDep = 1, PPC970_Unit = 7,
isBarrier = 1, isCall = 1, isReturn = 1, Uses = [RM] in
def TAILBA : IForm<18, 0, 0, (outs), (ins aaddr:$dst),
"ba $dst", BrB,
[]>;
let hasSideEffects = 1, isBarrier = 1, isCodeGenOnly = 1,
usesCustomInserter = 1 in {
def EH_SjLj_SetJmp32 : Pseudo<(outs GPRC:$dst), (ins memr:$buf),
"#EH_SJLJ_SETJMP32",
[(set i32:$dst, (PPCeh_sjlj_setjmp addr:$buf))]>,
Requires<[In32BitMode]>;
let isTerminator = 1 in
def EH_SjLj_LongJmp32 : Pseudo<(outs), (ins memr:$buf),
"#EH_SJLJ_LONGJMP32",
[(PPCeh_sjlj_longjmp addr:$buf)]>,
Requires<[In32BitMode]>;
}
let isBranch = 1, isTerminator = 1, isCodeGenOnly = 1 in {
def EH_SjLj_Setup : Pseudo<(outs), (ins directbrtarget:$dst),
"#EH_SjLj_Setup\t$dst", []>;
}
// DCB* instructions.
def DCBA : DCB_Form<758, 0, (outs), (ins memrr:$dst),
"dcba $dst", LdStDCBF, [(int_ppc_dcba xoaddr:$dst)]>,
PPC970_DGroup_Single;
def DCBF : DCB_Form<86, 0, (outs), (ins memrr:$dst),
"dcbf $dst", LdStDCBF, [(int_ppc_dcbf xoaddr:$dst)]>,
PPC970_DGroup_Single;
def DCBI : DCB_Form<470, 0, (outs), (ins memrr:$dst),
"dcbi $dst", LdStDCBF, [(int_ppc_dcbi xoaddr:$dst)]>,
PPC970_DGroup_Single;
def DCBST : DCB_Form<54, 0, (outs), (ins memrr:$dst),
"dcbst $dst", LdStDCBF, [(int_ppc_dcbst xoaddr:$dst)]>,
PPC970_DGroup_Single;
def DCBT : DCB_Form<278, 0, (outs), (ins memrr:$dst),
"dcbt $dst", LdStDCBF, [(int_ppc_dcbt xoaddr:$dst)]>,
PPC970_DGroup_Single;
def DCBTST : DCB_Form<246, 0, (outs), (ins memrr:$dst),
"dcbtst $dst", LdStDCBF, [(int_ppc_dcbtst xoaddr:$dst)]>,
PPC970_DGroup_Single;
def DCBZ : DCB_Form<1014, 0, (outs), (ins memrr:$dst),
"dcbz $dst", LdStDCBF, [(int_ppc_dcbz xoaddr:$dst)]>,
PPC970_DGroup_Single;
def DCBZL : DCB_Form<1014, 1, (outs), (ins memrr:$dst),
"dcbzl $dst", LdStDCBF, [(int_ppc_dcbzl xoaddr:$dst)]>,
PPC970_DGroup_Single;
def : Pat<(prefetch xoaddr:$dst, (i32 0), imm, (i32 1)),
(DCBT xoaddr:$dst)>;
// Atomic operations
let usesCustomInserter = 1 in {
let Defs = [CR0] in {
def ATOMIC_LOAD_ADD_I8 : Pseudo<
(outs GPRC:$dst), (ins memrr:$ptr, GPRC:$incr), "#ATOMIC_LOAD_ADD_I8",
[(set i32:$dst, (atomic_load_add_8 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_SUB_I8 : Pseudo<
(outs GPRC:$dst), (ins memrr:$ptr, GPRC:$incr), "#ATOMIC_LOAD_SUB_I8",
[(set i32:$dst, (atomic_load_sub_8 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_AND_I8 : Pseudo<
(outs GPRC:$dst), (ins memrr:$ptr, GPRC:$incr), "#ATOMIC_LOAD_AND_I8",
[(set i32:$dst, (atomic_load_and_8 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_OR_I8 : Pseudo<
(outs GPRC:$dst), (ins memrr:$ptr, GPRC:$incr), "#ATOMIC_LOAD_OR_I8",
[(set i32:$dst, (atomic_load_or_8 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_XOR_I8 : Pseudo<
(outs GPRC:$dst), (ins memrr:$ptr, GPRC:$incr), "ATOMIC_LOAD_XOR_I8",
[(set i32:$dst, (atomic_load_xor_8 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_NAND_I8 : Pseudo<
(outs GPRC:$dst), (ins memrr:$ptr, GPRC:$incr), "#ATOMIC_LOAD_NAND_I8",
[(set i32:$dst, (atomic_load_nand_8 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_ADD_I16 : Pseudo<
(outs GPRC:$dst), (ins memrr:$ptr, GPRC:$incr), "#ATOMIC_LOAD_ADD_I16",
[(set i32:$dst, (atomic_load_add_16 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_SUB_I16 : Pseudo<
(outs GPRC:$dst), (ins memrr:$ptr, GPRC:$incr), "#ATOMIC_LOAD_SUB_I16",
[(set i32:$dst, (atomic_load_sub_16 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_AND_I16 : Pseudo<
(outs GPRC:$dst), (ins memrr:$ptr, GPRC:$incr), "#ATOMIC_LOAD_AND_I16",
[(set i32:$dst, (atomic_load_and_16 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_OR_I16 : Pseudo<
(outs GPRC:$dst), (ins memrr:$ptr, GPRC:$incr), "#ATOMIC_LOAD_OR_I16",
[(set i32:$dst, (atomic_load_or_16 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_XOR_I16 : Pseudo<
(outs GPRC:$dst), (ins memrr:$ptr, GPRC:$incr), "#ATOMIC_LOAD_XOR_I16",
[(set i32:$dst, (atomic_load_xor_16 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_NAND_I16 : Pseudo<
(outs GPRC:$dst), (ins memrr:$ptr, GPRC:$incr), "#ATOMIC_LOAD_NAND_I16",
[(set i32:$dst, (atomic_load_nand_16 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_ADD_I32 : Pseudo<
(outs GPRC:$dst), (ins memrr:$ptr, GPRC:$incr), "#ATOMIC_LOAD_ADD_I32",
[(set i32:$dst, (atomic_load_add_32 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_SUB_I32 : Pseudo<
(outs GPRC:$dst), (ins memrr:$ptr, GPRC:$incr), "#ATOMIC_LOAD_SUB_I32",
[(set i32:$dst, (atomic_load_sub_32 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_AND_I32 : Pseudo<
(outs GPRC:$dst), (ins memrr:$ptr, GPRC:$incr), "#ATOMIC_LOAD_AND_I32",
[(set i32:$dst, (atomic_load_and_32 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_OR_I32 : Pseudo<
(outs GPRC:$dst), (ins memrr:$ptr, GPRC:$incr), "#ATOMIC_LOAD_OR_I32",
[(set i32:$dst, (atomic_load_or_32 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_XOR_I32 : Pseudo<
(outs GPRC:$dst), (ins memrr:$ptr, GPRC:$incr), "#ATOMIC_LOAD_XOR_I32",
[(set i32:$dst, (atomic_load_xor_32 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_NAND_I32 : Pseudo<
(outs GPRC:$dst), (ins memrr:$ptr, GPRC:$incr), "#ATOMIC_LOAD_NAND_I32",
[(set i32:$dst, (atomic_load_nand_32 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_CMP_SWAP_I8 : Pseudo<
(outs GPRC:$dst), (ins memrr:$ptr, GPRC:$old, GPRC:$new), "#ATOMIC_CMP_SWAP_I8",
[(set i32:$dst, (atomic_cmp_swap_8 xoaddr:$ptr, i32:$old, i32:$new))]>;
def ATOMIC_CMP_SWAP_I16 : Pseudo<
(outs GPRC:$dst), (ins memrr:$ptr, GPRC:$old, GPRC:$new), "#ATOMIC_CMP_SWAP_I16 $dst $ptr $old $new",
[(set i32:$dst, (atomic_cmp_swap_16 xoaddr:$ptr, i32:$old, i32:$new))]>;
def ATOMIC_CMP_SWAP_I32 : Pseudo<
(outs GPRC:$dst), (ins memrr:$ptr, GPRC:$old, GPRC:$new), "#ATOMIC_CMP_SWAP_I32 $dst $ptr $old $new",
[(set i32:$dst, (atomic_cmp_swap_32 xoaddr:$ptr, i32:$old, i32:$new))]>;
def ATOMIC_SWAP_I8 : Pseudo<
(outs GPRC:$dst), (ins memrr:$ptr, GPRC:$new), "#ATOMIC_SWAP_i8",
[(set i32:$dst, (atomic_swap_8 xoaddr:$ptr, i32:$new))]>;
def ATOMIC_SWAP_I16 : Pseudo<
(outs GPRC:$dst), (ins memrr:$ptr, GPRC:$new), "#ATOMIC_SWAP_I16",
[(set i32:$dst, (atomic_swap_16 xoaddr:$ptr, i32:$new))]>;
def ATOMIC_SWAP_I32 : Pseudo<
(outs GPRC:$dst), (ins memrr:$ptr, GPRC:$new), "#ATOMIC_SWAP_I32",
[(set i32:$dst, (atomic_swap_32 xoaddr:$ptr, i32:$new))]>;
}
}
// Instructions to support atomic operations
def LWARX : XForm_1<31, 20, (outs GPRC:$rD), (ins memrr:$src),
"lwarx $rD, $src", LdStLWARX,
[(set i32:$rD, (PPClarx xoaddr:$src))]>;
let Defs = [CR0] in
def STWCX : XForm_1<31, 150, (outs), (ins GPRC:$rS, memrr:$dst),
"stwcx. $rS, $dst", LdStSTWCX,
[(PPCstcx i32:$rS, xoaddr:$dst)]>,
isDOT;
let isTerminator = 1, isBarrier = 1, hasCtrlDep = 1 in
def TRAP : XForm_24<31, 4, (outs), (ins), "trap", LdStLoad, [(trap)]>;
//===----------------------------------------------------------------------===//
// PPC32 Load Instructions.
//
// Unindexed (r+i) Loads.
let canFoldAsLoad = 1, PPC970_Unit = 2 in {
def LBZ : DForm_1<34, (outs GPRC:$rD), (ins memri:$src),
"lbz $rD, $src", LdStLoad,
[(set i32:$rD, (zextloadi8 iaddr:$src))]>;
def LHA : DForm_1<42, (outs GPRC:$rD), (ins memri:$src),
"lha $rD, $src", LdStLHA,
[(set i32:$rD, (sextloadi16 iaddr:$src))]>,
PPC970_DGroup_Cracked;
def LHZ : DForm_1<40, (outs GPRC:$rD), (ins memri:$src),
"lhz $rD, $src", LdStLoad,
[(set i32:$rD, (zextloadi16 iaddr:$src))]>;
def LWZ : DForm_1<32, (outs GPRC:$rD), (ins memri:$src),
"lwz $rD, $src", LdStLoad,
[(set i32:$rD, (load iaddr:$src))]>;
def LFS : DForm_1<48, (outs F4RC:$rD), (ins memri:$src),
"lfs $rD, $src", LdStLFD,
[(set f32:$rD, (load iaddr:$src))]>;
def LFD : DForm_1<50, (outs F8RC:$rD), (ins memri:$src),
"lfd $rD, $src", LdStLFD,
[(set f64:$rD, (load iaddr:$src))]>;
// Unindexed (r+i) Loads with Update (preinc).
let mayLoad = 1 in {
def LBZU : DForm_1<35, (outs GPRC:$rD, ptr_rc_nor0:$ea_result), (ins memri:$addr),
"lbzu $rD, $addr", LdStLoadUpd,
[]>, RegConstraint<"$addr.reg = $ea_result">,
NoEncode<"$ea_result">;
def LHAU : DForm_1<43, (outs GPRC:$rD, ptr_rc_nor0:$ea_result), (ins memri:$addr),
"lhau $rD, $addr", LdStLHAU,
[]>, RegConstraint<"$addr.reg = $ea_result">,
NoEncode<"$ea_result">;
def LHZU : DForm_1<41, (outs GPRC:$rD, ptr_rc_nor0:$ea_result), (ins memri:$addr),
"lhzu $rD, $addr", LdStLoadUpd,
[]>, RegConstraint<"$addr.reg = $ea_result">,
NoEncode<"$ea_result">;
def LWZU : DForm_1<33, (outs GPRC:$rD, ptr_rc_nor0:$ea_result), (ins memri:$addr),
"lwzu $rD, $addr", LdStLoadUpd,
[]>, RegConstraint<"$addr.reg = $ea_result">,
NoEncode<"$ea_result">;
def LFSU : DForm_1<49, (outs F4RC:$rD, ptr_rc_nor0:$ea_result), (ins memri:$addr),
"lfsu $rD, $addr", LdStLFDU,
[]>, RegConstraint<"$addr.reg = $ea_result">,
NoEncode<"$ea_result">;
def LFDU : DForm_1<51, (outs F8RC:$rD, ptr_rc_nor0:$ea_result), (ins memri:$addr),
"lfdu $rD, $addr", LdStLFDU,
[]>, RegConstraint<"$addr.reg = $ea_result">,
NoEncode<"$ea_result">;
// Indexed (r+r) Loads with Update (preinc).
def LBZUX : XForm_1<31, 119, (outs GPRC:$rD, ptr_rc_nor0:$ea_result),
(ins memrr:$addr),
"lbzux $rD, $addr", LdStLoadUpd,
[]>, RegConstraint<"$addr.ptrreg = $ea_result">,
NoEncode<"$ea_result">;
def LHAUX : XForm_1<31, 375, (outs GPRC:$rD, ptr_rc_nor0:$ea_result),
(ins memrr:$addr),
"lhaux $rD, $addr", LdStLHAU,
[]>, RegConstraint<"$addr.ptrreg = $ea_result">,
NoEncode<"$ea_result">;
def LHZUX : XForm_1<31, 311, (outs GPRC:$rD, ptr_rc_nor0:$ea_result),
(ins memrr:$addr),
"lhzux $rD, $addr", LdStLoadUpd,
[]>, RegConstraint<"$addr.ptrreg = $ea_result">,
NoEncode<"$ea_result">;
def LWZUX : XForm_1<31, 55, (outs GPRC:$rD, ptr_rc_nor0:$ea_result),
(ins memrr:$addr),
"lwzux $rD, $addr", LdStLoadUpd,
[]>, RegConstraint<"$addr.ptrreg = $ea_result">,
NoEncode<"$ea_result">;
def LFSUX : XForm_1<31, 567, (outs F4RC:$rD, ptr_rc_nor0:$ea_result),
(ins memrr:$addr),
"lfsux $rD, $addr", LdStLFDU,
[]>, RegConstraint<"$addr.ptrreg = $ea_result">,
NoEncode<"$ea_result">;
def LFDUX : XForm_1<31, 631, (outs F8RC:$rD, ptr_rc_nor0:$ea_result),
(ins memrr:$addr),
"lfdux $rD, $addr", LdStLFDU,
[]>, RegConstraint<"$addr.ptrreg = $ea_result">,
NoEncode<"$ea_result">;
}
}
// Indexed (r+r) Loads.
//
let canFoldAsLoad = 1, PPC970_Unit = 2 in {
def LBZX : XForm_1<31, 87, (outs GPRC:$rD), (ins memrr:$src),
"lbzx $rD, $src", LdStLoad,
[(set i32:$rD, (zextloadi8 xaddr:$src))]>;
def LHAX : XForm_1<31, 343, (outs GPRC:$rD), (ins memrr:$src),
"lhax $rD, $src", LdStLHA,
[(set i32:$rD, (sextloadi16 xaddr:$src))]>,
PPC970_DGroup_Cracked;
def LHZX : XForm_1<31, 279, (outs GPRC:$rD), (ins memrr:$src),
"lhzx $rD, $src", LdStLoad,
[(set i32:$rD, (zextloadi16 xaddr:$src))]>;
def LWZX : XForm_1<31, 23, (outs GPRC:$rD), (ins memrr:$src),
"lwzx $rD, $src", LdStLoad,
[(set i32:$rD, (load xaddr:$src))]>;
def LHBRX : XForm_1<31, 790, (outs GPRC:$rD), (ins memrr:$src),
"lhbrx $rD, $src", LdStLoad,
[(set i32:$rD, (PPClbrx xoaddr:$src, i16))]>;
def LWBRX : XForm_1<31, 534, (outs GPRC:$rD), (ins memrr:$src),
"lwbrx $rD, $src", LdStLoad,
[(set i32:$rD, (PPClbrx xoaddr:$src, i32))]>;
def LFSX : XForm_25<31, 535, (outs F4RC:$frD), (ins memrr:$src),
"lfsx $frD, $src", LdStLFD,
[(set f32:$frD, (load xaddr:$src))]>;
def LFDX : XForm_25<31, 599, (outs F8RC:$frD), (ins memrr:$src),
"lfdx $frD, $src", LdStLFD,
[(set f64:$frD, (load xaddr:$src))]>;
}
//===----------------------------------------------------------------------===//
// PPC32 Store Instructions.
//
// Unindexed (r+i) Stores.
let PPC970_Unit = 2 in {
def STB : DForm_1<38, (outs), (ins GPRC:$rS, memri:$src),
"stb $rS, $src", LdStStore,
[(truncstorei8 i32:$rS, iaddr:$src)]>;
def STH : DForm_1<44, (outs), (ins GPRC:$rS, memri:$src),
"sth $rS, $src", LdStStore,
[(truncstorei16 i32:$rS, iaddr:$src)]>;
def STW : DForm_1<36, (outs), (ins GPRC:$rS, memri:$src),
"stw $rS, $src", LdStStore,
[(store i32:$rS, iaddr:$src)]>;
def STFS : DForm_1<52, (outs), (ins F4RC:$rS, memri:$dst),
"stfs $rS, $dst", LdStSTFD,
[(store f32:$rS, iaddr:$dst)]>;
def STFD : DForm_1<54, (outs), (ins F8RC:$rS, memri:$dst),
"stfd $rS, $dst", LdStSTFD,
[(store f64:$rS, iaddr:$dst)]>;
}
// Unindexed (r+i) Stores with Update (preinc).
let PPC970_Unit = 2, mayStore = 1 in {
def STBU : DForm_1<39, (outs ptr_rc_nor0:$ea_res), (ins GPRC:$rS, memri:$dst),
"stbu $rS, $dst", LdStStoreUpd, []>,
RegConstraint<"$dst.reg = $ea_res">, NoEncode<"$ea_res">;
def STHU : DForm_1<45, (outs ptr_rc_nor0:$ea_res), (ins GPRC:$rS, memri:$dst),
"sthu $rS, $dst", LdStStoreUpd, []>,
RegConstraint<"$dst.reg = $ea_res">, NoEncode<"$ea_res">;
def STWU : DForm_1<37, (outs ptr_rc_nor0:$ea_res), (ins GPRC:$rS, memri:$dst),
"stwu $rS, $dst", LdStStoreUpd, []>,
RegConstraint<"$dst.reg = $ea_res">, NoEncode<"$ea_res">;
def STFSU : DForm_1<37, (outs ptr_rc_nor0:$ea_res), (ins F4RC:$rS, memri:$dst),
"stfsu $rS, $dst", LdStSTFDU, []>,
RegConstraint<"$dst.reg = $ea_res">, NoEncode<"$ea_res">;
def STFDU : DForm_1<37, (outs ptr_rc_nor0:$ea_res), (ins F8RC:$rS, memri:$dst),
"stfdu $rS, $dst", LdStSTFDU, []>,
RegConstraint<"$dst.reg = $ea_res">, NoEncode<"$ea_res">;
}
// Patterns to match the pre-inc stores. We can't put the patterns on
// the instruction definitions directly as ISel wants the address base
// and offset to be separate operands, not a single complex operand.
def : Pat<(pre_truncsti8 i32:$rS, iPTR:$ptrreg, iaddroff:$ptroff),
(STBU $rS, iaddroff:$ptroff, $ptrreg)>;
def : Pat<(pre_truncsti16 i32:$rS, iPTR:$ptrreg, iaddroff:$ptroff),
(STHU $rS, iaddroff:$ptroff, $ptrreg)>;
def : Pat<(pre_store i32:$rS, iPTR:$ptrreg, iaddroff:$ptroff),
(STWU $rS, iaddroff:$ptroff, $ptrreg)>;
def : Pat<(pre_store f32:$rS, iPTR:$ptrreg, iaddroff:$ptroff),
(STFSU $rS, iaddroff:$ptroff, $ptrreg)>;
def : Pat<(pre_store f64:$rS, iPTR:$ptrreg, iaddroff:$ptroff),
(STFDU $rS, iaddroff:$ptroff, $ptrreg)>;
// Indexed (r+r) Stores.
let PPC970_Unit = 2 in {
def STBX : XForm_8<31, 215, (outs), (ins GPRC:$rS, memrr:$dst),
"stbx $rS, $dst", LdStStore,
[(truncstorei8 i32:$rS, xaddr:$dst)]>,
PPC970_DGroup_Cracked;
def STHX : XForm_8<31, 407, (outs), (ins GPRC:$rS, memrr:$dst),
"sthx $rS, $dst", LdStStore,
[(truncstorei16 i32:$rS, xaddr:$dst)]>,
PPC970_DGroup_Cracked;
def STWX : XForm_8<31, 151, (outs), (ins GPRC:$rS, memrr:$dst),
"stwx $rS, $dst", LdStStore,
[(store i32:$rS, xaddr:$dst)]>,
PPC970_DGroup_Cracked;
def STHBRX: XForm_8<31, 918, (outs), (ins GPRC:$rS, memrr:$dst),
"sthbrx $rS, $dst", LdStStore,
[(PPCstbrx i32:$rS, xoaddr:$dst, i16)]>,
PPC970_DGroup_Cracked;
def STWBRX: XForm_8<31, 662, (outs), (ins GPRC:$rS, memrr:$dst),
"stwbrx $rS, $dst", LdStStore,
[(PPCstbrx i32:$rS, xoaddr:$dst, i32)]>,
PPC970_DGroup_Cracked;
def STFIWX: XForm_28<31, 983, (outs), (ins F8RC:$frS, memrr:$dst),
"stfiwx $frS, $dst", LdStSTFD,
[(PPCstfiwx f64:$frS, xoaddr:$dst)]>;
def STFSX : XForm_28<31, 663, (outs), (ins F4RC:$frS, memrr:$dst),
"stfsx $frS, $dst", LdStSTFD,
[(store f32:$frS, xaddr:$dst)]>;
def STFDX : XForm_28<31, 727, (outs), (ins F8RC:$frS, memrr:$dst),
"stfdx $frS, $dst", LdStSTFD,
[(store f64:$frS, xaddr:$dst)]>;
}
// Indexed (r+r) Stores with Update (preinc).
let PPC970_Unit = 2, mayStore = 1 in {
def STBUX : XForm_8<31, 247, (outs ptr_rc_nor0:$ea_res), (ins GPRC:$rS, memrr:$dst),
"stbux $rS, $dst", LdStStoreUpd, []>,
RegConstraint<"$dst.ptrreg = $ea_res">, NoEncode<"$ea_res">,
PPC970_DGroup_Cracked;
def STHUX : XForm_8<31, 439, (outs ptr_rc_nor0:$ea_res), (ins GPRC:$rS, memrr:$dst),
"sthux $rS, $dst", LdStStoreUpd, []>,
RegConstraint<"$dst.ptrreg = $ea_res">, NoEncode<"$ea_res">,
PPC970_DGroup_Cracked;
def STWUX : XForm_8<31, 183, (outs ptr_rc_nor0:$ea_res), (ins GPRC:$rS, memrr:$dst),
"stwux $rS, $dst", LdStStoreUpd, []>,
RegConstraint<"$dst.ptrreg = $ea_res">, NoEncode<"$ea_res">,
PPC970_DGroup_Cracked;
def STFSUX: XForm_8<31, 695, (outs ptr_rc_nor0:$ea_res), (ins F4RC:$rS, memrr:$dst),
"stfsux $rS, $dst", LdStSTFDU, []>,
RegConstraint<"$dst.ptrreg = $ea_res">, NoEncode<"$ea_res">,
PPC970_DGroup_Cracked;
def STFDUX: XForm_8<31, 759, (outs ptr_rc_nor0:$ea_res), (ins F8RC:$rS, memrr:$dst),
"stfdux $rS, $dst", LdStSTFDU, []>,
RegConstraint<"$dst.ptrreg = $ea_res">, NoEncode<"$ea_res">,
PPC970_DGroup_Cracked;
}
// Patterns to match the pre-inc stores. We can't put the patterns on
// the instruction definitions directly as ISel wants the address base
// and offset to be separate operands, not a single complex operand.
def : Pat<(pre_truncsti8 i32:$rS, iPTR:$ptrreg, iPTR:$ptroff),
(STBUX $rS, $ptrreg, $ptroff)>;
def : Pat<(pre_truncsti16 i32:$rS, iPTR:$ptrreg, iPTR:$ptroff),
(STHUX $rS, $ptrreg, $ptroff)>;
def : Pat<(pre_store i32:$rS, iPTR:$ptrreg, iPTR:$ptroff),
(STWUX $rS, $ptrreg, $ptroff)>;
def : Pat<(pre_store f32:$rS, iPTR:$ptrreg, iPTR:$ptroff),
(STFSUX $rS, $ptrreg, $ptroff)>;
def : Pat<(pre_store f64:$rS, iPTR:$ptrreg, iPTR:$ptroff),
(STFDUX $rS, $ptrreg, $ptroff)>;
def SYNC : XForm_24_sync<31, 598, (outs), (ins),
"sync", LdStSync,
[(int_ppc_sync)]>;
//===----------------------------------------------------------------------===//
// PPC32 Arithmetic Instructions.
//
let PPC970_Unit = 1 in { // FXU Operations.
def ADDI : DForm_2<14, (outs GPRC:$rD), (ins GPRC_NOR0:$rA, s16imm:$imm),
"addi $rD, $rA, $imm", IntSimple,
[(set i32:$rD, (add i32:$rA, immSExt16:$imm))]>;
def ADDIL : DForm_2<14, (outs GPRC:$rD), (ins GPRC_NOR0:$rA, symbolLo:$imm),
"addi $rD, $rA, $imm", IntSimple,
[(set i32:$rD, (add i32:$rA, immSExt16:$imm))]>;
let Defs = [CARRY] in {
def ADDIC : DForm_2<12, (outs GPRC:$rD), (ins GPRC:$rA, s16imm:$imm),
"addic $rD, $rA, $imm", IntGeneral,
[(set i32:$rD, (addc i32:$rA, immSExt16:$imm))]>,
PPC970_DGroup_Cracked;
def ADDICo : DForm_2<13, (outs GPRC:$rD), (ins GPRC:$rA, s16imm:$imm),
"addic. $rD, $rA, $imm", IntGeneral,
[]>;
}
def ADDIS : DForm_2<15, (outs GPRC:$rD), (ins GPRC_NOR0:$rA, symbolHi:$imm),
"addis $rD, $rA, $imm", IntSimple,
[(set i32:$rD, (add i32:$rA, imm16ShiftedSExt:$imm))]>;
def LA : DForm_2<14, (outs GPRC:$rD), (ins GPRC_NOR0:$rA, symbolLo:$sym),
"la $rD, $sym($rA)", IntGeneral,
[(set i32:$rD, (add i32:$rA,
(PPClo tglobaladdr:$sym, 0)))]>;
def MULLI : DForm_2< 7, (outs GPRC:$rD), (ins GPRC:$rA, s16imm:$imm),
"mulli $rD, $rA, $imm", IntMulLI,
[(set i32:$rD, (mul i32:$rA, immSExt16:$imm))]>;
let Defs = [CARRY] in {
def SUBFIC : DForm_2< 8, (outs GPRC:$rD), (ins GPRC:$rA, s16imm:$imm),
"subfic $rD, $rA, $imm", IntGeneral,
[(set i32:$rD, (subc immSExt16:$imm, i32:$rA))]>;
}
let isReMaterializable = 1, isAsCheapAsAMove = 1, isMoveImm = 1 in {
def LI : DForm_2_r0<14, (outs GPRC:$rD), (ins symbolLo:$imm),
"li $rD, $imm", IntSimple,
[(set i32:$rD, immSExt16:$imm)]>;
def LIS : DForm_2_r0<15, (outs GPRC:$rD), (ins symbolHi:$imm),
"lis $rD, $imm", IntSimple,
[(set i32:$rD, imm16ShiftedSExt:$imm)]>;
}
}
let PPC970_Unit = 1 in { // FXU Operations.
def ANDIo : DForm_4<28, (outs GPRC:$dst), (ins GPRC:$src1, u16imm:$src2),
"andi. $dst, $src1, $src2", IntGeneral,
[(set i32:$dst, (and i32:$src1, immZExt16:$src2))]>,
isDOT;
def ANDISo : DForm_4<29, (outs GPRC:$dst), (ins GPRC:$src1, u16imm:$src2),
"andis. $dst, $src1, $src2", IntGeneral,
[(set i32:$dst, (and i32:$src1, imm16ShiftedZExt:$src2))]>,
isDOT;
def ORI : DForm_4<24, (outs GPRC:$dst), (ins GPRC:$src1, u16imm:$src2),
"ori $dst, $src1, $src2", IntSimple,
[(set i32:$dst, (or i32:$src1, immZExt16:$src2))]>;
def ORIS : DForm_4<25, (outs GPRC:$dst), (ins GPRC:$src1, u16imm:$src2),
"oris $dst, $src1, $src2", IntSimple,
[(set i32:$dst, (or i32:$src1, imm16ShiftedZExt:$src2))]>;
def XORI : DForm_4<26, (outs GPRC:$dst), (ins GPRC:$src1, u16imm:$src2),
"xori $dst, $src1, $src2", IntSimple,
[(set i32:$dst, (xor i32:$src1, immZExt16:$src2))]>;
def XORIS : DForm_4<27, (outs GPRC:$dst), (ins GPRC:$src1, u16imm:$src2),
"xoris $dst, $src1, $src2", IntSimple,
[(set i32:$dst, (xor i32:$src1, imm16ShiftedZExt:$src2))]>;
def NOP : DForm_4_zero<24, (outs), (ins), "nop", IntSimple,
[]>;
def CMPWI : DForm_5_ext<11, (outs CRRC:$crD), (ins GPRC:$rA, s16imm:$imm),
"cmpwi $crD, $rA, $imm", IntCompare>;
def CMPLWI : DForm_6_ext<10, (outs CRRC:$dst), (ins GPRC:$src1, u16imm:$src2),
"cmplwi $dst, $src1, $src2", IntCompare>;
}
let PPC970_Unit = 1 in { // FXU Operations.
def NAND : XForm_6<31, 476, (outs GPRC:$rA), (ins GPRC:$rS, GPRC:$rB),
"nand $rA, $rS, $rB", IntSimple,
[(set i32:$rA, (not (and i32:$rS, i32:$rB)))]>;
def AND : XForm_6<31, 28, (outs GPRC:$rA), (ins GPRC:$rS, GPRC:$rB),
"and $rA, $rS, $rB", IntSimple,
[(set i32:$rA, (and i32:$rS, i32:$rB))]>;
def ANDC : XForm_6<31, 60, (outs GPRC:$rA), (ins GPRC:$rS, GPRC:$rB),
"andc $rA, $rS, $rB", IntSimple,
[(set i32:$rA, (and i32:$rS, (not i32:$rB)))]>;
def OR : XForm_6<31, 444, (outs GPRC:$rA), (ins GPRC:$rS, GPRC:$rB),
"or $rA, $rS, $rB", IntSimple,
[(set i32:$rA, (or i32:$rS, i32:$rB))]>;
def NOR : XForm_6<31, 124, (outs GPRC:$rA), (ins GPRC:$rS, GPRC:$rB),
"nor $rA, $rS, $rB", IntSimple,
[(set i32:$rA, (not (or i32:$rS, i32:$rB)))]>;
def ORC : XForm_6<31, 412, (outs GPRC:$rA), (ins GPRC:$rS, GPRC:$rB),
"orc $rA, $rS, $rB", IntSimple,
[(set i32:$rA, (or i32:$rS, (not i32:$rB)))]>;
def EQV : XForm_6<31, 284, (outs GPRC:$rA), (ins GPRC:$rS, GPRC:$rB),
"eqv $rA, $rS, $rB", IntSimple,
[(set i32:$rA, (not (xor i32:$rS, i32:$rB)))]>;
def XOR : XForm_6<31, 316, (outs GPRC:$rA), (ins GPRC:$rS, GPRC:$rB),
"xor $rA, $rS, $rB", IntSimple,
[(set i32:$rA, (xor i32:$rS, i32:$rB))]>;
def SLW : XForm_6<31, 24, (outs GPRC:$rA), (ins GPRC:$rS, GPRC:$rB),
"slw $rA, $rS, $rB", IntGeneral,
[(set i32:$rA, (PPCshl i32:$rS, i32:$rB))]>;
def SRW : XForm_6<31, 536, (outs GPRC:$rA), (ins GPRC:$rS, GPRC:$rB),
"srw $rA, $rS, $rB", IntGeneral,
[(set i32:$rA, (PPCsrl i32:$rS, i32:$rB))]>;
let Defs = [CARRY] in {
def SRAW : XForm_6<31, 792, (outs GPRC:$rA), (ins GPRC:$rS, GPRC:$rB),
"sraw $rA, $rS, $rB", IntShift,
[(set i32:$rA, (PPCsra i32:$rS, i32:$rB))]>;
}
}
let PPC970_Unit = 1 in { // FXU Operations.
let Defs = [CARRY] in {
def SRAWI : XForm_10<31, 824, (outs GPRC:$rA), (ins GPRC:$rS, u5imm:$SH),
"srawi $rA, $rS, $SH", IntShift,
[(set i32:$rA, (sra i32:$rS, (i32 imm:$SH)))]>;
}
def CNTLZW : XForm_11<31, 26, (outs GPRC:$rA), (ins GPRC:$rS),
"cntlzw $rA, $rS", IntGeneral,
[(set i32:$rA, (ctlz i32:$rS))]>;
def EXTSB : XForm_11<31, 954, (outs GPRC:$rA), (ins GPRC:$rS),
"extsb $rA, $rS", IntSimple,
[(set i32:$rA, (sext_inreg i32:$rS, i8))]>;
def EXTSH : XForm_11<31, 922, (outs GPRC:$rA), (ins GPRC:$rS),
"extsh $rA, $rS", IntSimple,
[(set i32:$rA, (sext_inreg i32:$rS, i16))]>;
def CMPW : XForm_16_ext<31, 0, (outs CRRC:$crD), (ins GPRC:$rA, GPRC:$rB),
"cmpw $crD, $rA, $rB", IntCompare>;
def CMPLW : XForm_16_ext<31, 32, (outs CRRC:$crD), (ins GPRC:$rA, GPRC:$rB),
"cmplw $crD, $rA, $rB", IntCompare>;
}
let PPC970_Unit = 3 in { // FPU Operations.
//def FCMPO : XForm_17<63, 32, (outs CRRC:$crD), (ins FPRC:$fA, FPRC:$fB),
// "fcmpo $crD, $fA, $fB", FPCompare>;
def FCMPUS : XForm_17<63, 0, (outs CRRC:$crD), (ins F4RC:$fA, F4RC:$fB),
"fcmpu $crD, $fA, $fB", FPCompare>;
def FCMPUD : XForm_17<63, 0, (outs CRRC:$crD), (ins F8RC:$fA, F8RC:$fB),
"fcmpu $crD, $fA, $fB", FPCompare>;
let Uses = [RM] in {
def FCTIWZ : XForm_26<63, 15, (outs F8RC:$frD), (ins F8RC:$frB),
"fctiwz $frD, $frB", FPGeneral,
[(set f64:$frD, (PPCfctiwz f64:$frB))]>;
def FRSP : XForm_26<63, 12, (outs F4RC:$frD), (ins F8RC:$frB),
"frsp $frD, $frB", FPGeneral,
[(set f32:$frD, (fround f64:$frB))]>;
def FSQRT : XForm_26<63, 22, (outs F8RC:$frD), (ins F8RC:$frB),
"fsqrt $frD, $frB", FPSqrt,
[(set f64:$frD, (fsqrt f64:$frB))]>;
def FSQRTS : XForm_26<59, 22, (outs F4RC:$frD), (ins F4RC:$frB),
"fsqrts $frD, $frB", FPSqrt,
[(set f32:$frD, (fsqrt f32:$frB))]>;
}
}
/// Note that FMR is defined as pseudo-ops on the PPC970 because they are
/// often coalesced away and we don't want the dispatch group builder to think
/// that they will fill slots (which could cause the load of a LSU reject to
/// sneak into a d-group with a store).
def FMR : XForm_26<63, 72, (outs F4RC:$frD), (ins F4RC:$frB),
"fmr $frD, $frB", FPGeneral,
[]>, // (set f32:$frD, f32:$frB)
PPC970_Unit_Pseudo;
let PPC970_Unit = 3 in { // FPU Operations.
// These are artificially split into two different forms, for 4/8 byte FP.
def FABSS : XForm_26<63, 264, (outs F4RC:$frD), (ins F4RC:$frB),
"fabs $frD, $frB", FPGeneral,
[(set f32:$frD, (fabs f32:$frB))]>;
def FABSD : XForm_26<63, 264, (outs F8RC:$frD), (ins F8RC:$frB),
"fabs $frD, $frB", FPGeneral,
[(set f64:$frD, (fabs f64:$frB))]>;
def FNABSS : XForm_26<63, 136, (outs F4RC:$frD), (ins F4RC:$frB),
"fnabs $frD, $frB", FPGeneral,
[(set f32:$frD, (fneg (fabs f32:$frB)))]>;
def FNABSD : XForm_26<63, 136, (outs F8RC:$frD), (ins F8RC:$frB),
"fnabs $frD, $frB", FPGeneral,
[(set f64:$frD, (fneg (fabs f64:$frB)))]>;
def FNEGS : XForm_26<63, 40, (outs F4RC:$frD), (ins F4RC:$frB),
"fneg $frD, $frB", FPGeneral,
[(set f32:$frD, (fneg f32:$frB))]>;
def FNEGD : XForm_26<63, 40, (outs F8RC:$frD), (ins F8RC:$frB),
"fneg $frD, $frB", FPGeneral,
[(set f64:$frD, (fneg f64:$frB))]>;
}
// XL-Form instructions. condition register logical ops.
//
def MCRF : XLForm_3<19, 0, (outs CRRC:$BF), (ins CRRC:$BFA),
"mcrf $BF, $BFA", BrMCR>,
PPC970_DGroup_First, PPC970_Unit_CRU;
def CREQV : XLForm_1<19, 289, (outs CRBITRC:$CRD),
(ins CRBITRC:$CRA, CRBITRC:$CRB),
"creqv $CRD, $CRA, $CRB", BrCR,
[]>;
def CROR : XLForm_1<19, 449, (outs CRBITRC:$CRD),
(ins CRBITRC:$CRA, CRBITRC:$CRB),
"cror $CRD, $CRA, $CRB", BrCR,
[]>;
def CRSET : XLForm_1_ext<19, 289, (outs CRBITRC:$dst), (ins),
"creqv $dst, $dst, $dst", BrCR,
[]>;
def CRUNSET: XLForm_1_ext<19, 193, (outs CRBITRC:$dst), (ins),
"crxor $dst, $dst, $dst", BrCR,
[]>;
let Defs = [CR1EQ], CRD = 6 in {
def CR6SET : XLForm_1_ext<19, 289, (outs), (ins),
"creqv 6, 6, 6", BrCR,
[(PPCcr6set)]>;
def CR6UNSET: XLForm_1_ext<19, 193, (outs), (ins),
"crxor 6, 6, 6", BrCR,
[(PPCcr6unset)]>;
}
// XFX-Form instructions. Instructions that deal with SPRs.
//
let Uses = [CTR] in {
def MFCTR : XFXForm_1_ext<31, 339, 9, (outs GPRC:$rT), (ins),
"mfctr $rT", SprMFSPR>,
PPC970_DGroup_First, PPC970_Unit_FXU;
}
let Defs = [CTR], Pattern = [(PPCmtctr i32:$rS)] in {
def MTCTR : XFXForm_7_ext<31, 467, 9, (outs), (ins GPRC:$rS),
"mtctr $rS", SprMTSPR>,
PPC970_DGroup_First, PPC970_Unit_FXU;
}
let Defs = [LR] in {
def MTLR : XFXForm_7_ext<31, 467, 8, (outs), (ins GPRC:$rS),
"mtlr $rS", SprMTSPR>,
PPC970_DGroup_First, PPC970_Unit_FXU;
}
let Uses = [LR] in {
def MFLR : XFXForm_1_ext<31, 339, 8, (outs GPRC:$rT), (ins),
"mflr $rT", SprMFSPR>,
PPC970_DGroup_First, PPC970_Unit_FXU;
}
// Move to/from VRSAVE: despite being a SPR, the VRSAVE register is renamed like
// a GPR on the PPC970. As such, copies in and out have the same performance
// characteristics as an OR instruction.
def MTVRSAVE : XFXForm_7_ext<31, 467, 256, (outs), (ins GPRC:$rS),
"mtspr 256, $rS", IntGeneral>,
PPC970_DGroup_Single, PPC970_Unit_FXU;
def MFVRSAVE : XFXForm_1_ext<31, 339, 256, (outs GPRC:$rT), (ins),
"mfspr $rT, 256", IntGeneral>,
PPC970_DGroup_First, PPC970_Unit_FXU;
let isCodeGenOnly = 1 in {
def MTVRSAVEv : XFXForm_7_ext<31, 467, 256,
(outs VRSAVERC:$reg), (ins GPRC:$rS),
"mtspr 256, $rS", IntGeneral>,
PPC970_DGroup_Single, PPC970_Unit_FXU;
def MFVRSAVEv : XFXForm_1_ext<31, 339, 256, (outs GPRC:$rT),
(ins VRSAVERC:$reg),
"mfspr $rT, 256", IntGeneral>,
PPC970_DGroup_First, PPC970_Unit_FXU;
}
// SPILL_VRSAVE - Indicate that we're dumping the VRSAVE register,
// so we'll need to scavenge a register for it.
let mayStore = 1 in
def SPILL_VRSAVE : Pseudo<(outs), (ins VRSAVERC:$vrsave, memri:$F),
"#SPILL_VRSAVE", []>;
// RESTORE_VRSAVE - Indicate that we're restoring the VRSAVE register (previously
// spilled), so we'll need to scavenge a register for it.
let mayLoad = 1 in
def RESTORE_VRSAVE : Pseudo<(outs VRSAVERC:$vrsave), (ins memri:$F),
"#RESTORE_VRSAVE", []>;
def MTCRF : XFXForm_5<31, 144, (outs crbitm:$FXM), (ins GPRC:$rS),
"mtcrf $FXM, $rS", BrMCRX>,
PPC970_MicroCode, PPC970_Unit_CRU;
// This is a pseudo for MFCR, which implicitly uses all 8 of its subregisters;
// declaring that here gives the local register allocator problems with this:
// vreg = MCRF CR0
// MFCR <kill of whatever preg got assigned to vreg>
// while not declaring it breaks DeadMachineInstructionElimination.
// As it turns out, in all cases where we currently use this,
// we're only interested in one subregister of it. Represent this in the
// instruction to keep the register allocator from becoming confused.
//
// FIXME: Make this a real Pseudo instruction when the JIT switches to MC.
def MFCRpseud: XFXForm_3<31, 19, (outs GPRC:$rT), (ins crbitm:$FXM),
"#MFCRpseud", SprMFCR>,
PPC970_MicroCode, PPC970_Unit_CRU;
def MFCR : XFXForm_3<31, 19, (outs GPRC:$rT), (ins),
"mfcr $rT", SprMFCR>,
PPC970_MicroCode, PPC970_Unit_CRU;
def MFOCRF: XFXForm_5a<31, 19, (outs GPRC:$rT), (ins crbitm:$FXM),
"mfocrf $rT, $FXM", SprMFCR>,
PPC970_DGroup_First, PPC970_Unit_CRU;
// Instructions to manipulate FPSCR. Only long double handling uses these.
// FPSCR is not modelled; we use the SDNode Flag to keep things in order.
let Uses = [RM], Defs = [RM] in {
def MTFSB0 : XForm_43<63, 70, (outs), (ins u5imm:$FM),
"mtfsb0 $FM", IntMTFSB0,
[(PPCmtfsb0 (i32 imm:$FM))]>,
PPC970_DGroup_Single, PPC970_Unit_FPU;
def MTFSB1 : XForm_43<63, 38, (outs), (ins u5imm:$FM),
"mtfsb1 $FM", IntMTFSB0,
[(PPCmtfsb1 (i32 imm:$FM))]>,
PPC970_DGroup_Single, PPC970_Unit_FPU;
// MTFSF does not actually produce an FP result. We pretend it copies
// input reg B to the output. If we didn't do this it would look like the
// instruction had no outputs (because we aren't modelling the FPSCR) and
// it would be deleted.
def MTFSF : XFLForm<63, 711, (outs F8RC:$FRA),
(ins i32imm:$FM, F8RC:$rT, F8RC:$FRB),
"mtfsf $FM, $rT", "$FRB = $FRA", IntMTFSB0,
[(set f64:$FRA, (PPCmtfsf (i32 imm:$FM),
f64:$rT, f64:$FRB))]>,
PPC970_DGroup_Single, PPC970_Unit_FPU;
}
let Uses = [RM] in {
def MFFS : XForm_42<63, 583, (outs F8RC:$rT), (ins),
"mffs $rT", IntMFFS,
[(set f64:$rT, (PPCmffs))]>,
PPC970_DGroup_Single, PPC970_Unit_FPU;
def FADDrtz: AForm_2<63, 21,
(outs F8RC:$FRT), (ins F8RC:$FRA, F8RC:$FRB),
"fadd $FRT, $FRA, $FRB", FPAddSub,
[(set f64:$FRT, (PPCfaddrtz f64:$FRA, f64:$FRB))]>,
PPC970_DGroup_Single, PPC970_Unit_FPU;
}
let PPC970_Unit = 1 in { // FXU Operations.
// XO-Form instructions. Arithmetic instructions that can set overflow bit
//
def ADD4 : XOForm_1<31, 266, 0, (outs GPRC:$rT), (ins GPRC:$rA, GPRC:$rB),
"add $rT, $rA, $rB", IntSimple,
[(set i32:$rT, (add i32:$rA, i32:$rB))]>;
let Defs = [CARRY] in {
def ADDC : XOForm_1<31, 10, 0, (outs GPRC:$rT), (ins GPRC:$rA, GPRC:$rB),
"addc $rT, $rA, $rB", IntGeneral,
[(set i32:$rT, (addc i32:$rA, i32:$rB))]>,
PPC970_DGroup_Cracked;
}
def DIVW : XOForm_1<31, 491, 0, (outs GPRC:$rT), (ins GPRC:$rA, GPRC:$rB),
"divw $rT, $rA, $rB", IntDivW,
[(set i32:$rT, (sdiv i32:$rA, i32:$rB))]>,
PPC970_DGroup_First, PPC970_DGroup_Cracked;
def DIVWU : XOForm_1<31, 459, 0, (outs GPRC:$rT), (ins GPRC:$rA, GPRC:$rB),
"divwu $rT, $rA, $rB", IntDivW,
[(set i32:$rT, (udiv i32:$rA, i32:$rB))]>,
PPC970_DGroup_First, PPC970_DGroup_Cracked;
def MULHW : XOForm_1<31, 75, 0, (outs GPRC:$rT), (ins GPRC:$rA, GPRC:$rB),
"mulhw $rT, $rA, $rB", IntMulHW,
[(set i32:$rT, (mulhs i32:$rA, i32:$rB))]>;
def MULHWU : XOForm_1<31, 11, 0, (outs GPRC:$rT), (ins GPRC:$rA, GPRC:$rB),
"mulhwu $rT, $rA, $rB", IntMulHWU,
[(set i32:$rT, (mulhu i32:$rA, i32:$rB))]>;
def MULLW : XOForm_1<31, 235, 0, (outs GPRC:$rT), (ins GPRC:$rA, GPRC:$rB),
"mullw $rT, $rA, $rB", IntMulHW,
[(set i32:$rT, (mul i32:$rA, i32:$rB))]>;
def SUBF : XOForm_1<31, 40, 0, (outs GPRC:$rT), (ins GPRC:$rA, GPRC:$rB),
"subf $rT, $rA, $rB", IntGeneral,
[(set i32:$rT, (sub i32:$rB, i32:$rA))]>;
let Defs = [CARRY] in {
def SUBFC : XOForm_1<31, 8, 0, (outs GPRC:$rT), (ins GPRC:$rA, GPRC:$rB),
"subfc $rT, $rA, $rB", IntGeneral,
[(set i32:$rT, (subc i32:$rB, i32:$rA))]>,
PPC970_DGroup_Cracked;
}
def NEG : XOForm_3<31, 104, 0, (outs GPRC:$rT), (ins GPRC:$rA),
"neg $rT, $rA", IntSimple,
[(set i32:$rT, (ineg i32:$rA))]>;
let Uses = [CARRY], Defs = [CARRY] in {
def ADDE : XOForm_1<31, 138, 0, (outs GPRC:$rT), (ins GPRC:$rA, GPRC:$rB),
"adde $rT, $rA, $rB", IntGeneral,
[(set i32:$rT, (adde i32:$rA, i32:$rB))]>;
def ADDME : XOForm_3<31, 234, 0, (outs GPRC:$rT), (ins GPRC:$rA),
"addme $rT, $rA", IntGeneral,
[(set i32:$rT, (adde i32:$rA, -1))]>;
def ADDZE : XOForm_3<31, 202, 0, (outs GPRC:$rT), (ins GPRC:$rA),
"addze $rT, $rA", IntGeneral,
[(set i32:$rT, (adde i32:$rA, 0))]>;
def SUBFE : XOForm_1<31, 136, 0, (outs GPRC:$rT), (ins GPRC:$rA, GPRC:$rB),
"subfe $rT, $rA, $rB", IntGeneral,
[(set i32:$rT, (sube i32:$rB, i32:$rA))]>;
def SUBFME : XOForm_3<31, 232, 0, (outs GPRC:$rT), (ins GPRC:$rA),
"subfme $rT, $rA", IntGeneral,
[(set i32:$rT, (sube -1, i32:$rA))]>;
def SUBFZE : XOForm_3<31, 200, 0, (outs GPRC:$rT), (ins GPRC:$rA),
"subfze $rT, $rA", IntGeneral,
[(set i32:$rT, (sube 0, i32:$rA))]>;
}
}
// A-Form instructions. Most of the instructions executed in the FPU are of
// this type.
//
let PPC970_Unit = 3 in { // FPU Operations.
let Uses = [RM] in {
def FMADD : AForm_1<63, 29,
(outs F8RC:$FRT), (ins F8RC:$FRA, F8RC:$FRC, F8RC:$FRB),
"fmadd $FRT, $FRA, $FRC, $FRB", FPFused,
[(set f64:$FRT, (fma f64:$FRA, f64:$FRC, f64:$FRB))]>;
def FMADDS : AForm_1<59, 29,
(outs F4RC:$FRT), (ins F4RC:$FRA, F4RC:$FRC, F4RC:$FRB),
"fmadds $FRT, $FRA, $FRC, $FRB", FPGeneral,
[(set f32:$FRT, (fma f32:$FRA, f32:$FRC, f32:$FRB))]>;
def FMSUB : AForm_1<63, 28,
(outs F8RC:$FRT), (ins F8RC:$FRA, F8RC:$FRC, F8RC:$FRB),
"fmsub $FRT, $FRA, $FRC, $FRB", FPFused,
[(set f64:$FRT,
(fma f64:$FRA, f64:$FRC, (fneg f64:$FRB)))]>;
def FMSUBS : AForm_1<59, 28,
(outs F4RC:$FRT), (ins F4RC:$FRA, F4RC:$FRC, F4RC:$FRB),
"fmsubs $FRT, $FRA, $FRC, $FRB", FPGeneral,
[(set f32:$FRT,
(fma f32:$FRA, f32:$FRC, (fneg f32:$FRB)))]>;
def FNMADD : AForm_1<63, 31,
(outs F8RC:$FRT), (ins F8RC:$FRA, F8RC:$FRC, F8RC:$FRB),
"fnmadd $FRT, $FRA, $FRC, $FRB", FPFused,
[(set f64:$FRT,
(fneg (fma f64:$FRA, f64:$FRC, f64:$FRB)))]>;
def FNMADDS : AForm_1<59, 31,
(outs F4RC:$FRT), (ins F4RC:$FRA, F4RC:$FRC, F4RC:$FRB),
"fnmadds $FRT, $FRA, $FRC, $FRB", FPGeneral,
[(set f32:$FRT,
(fneg (fma f32:$FRA, f32:$FRC, f32:$FRB)))]>;
def FNMSUB : AForm_1<63, 30,
(outs F8RC:$FRT), (ins F8RC:$FRA, F8RC:$FRC, F8RC:$FRB),
"fnmsub $FRT, $FRA, $FRC, $FRB", FPFused,
[(set f64:$FRT, (fneg (fma f64:$FRA, f64:$FRC,
(fneg f64:$FRB))))]>;
def FNMSUBS : AForm_1<59, 30,
(outs F4RC:$FRT), (ins F4RC:$FRA, F4RC:$FRC, F4RC:$FRB),
"fnmsubs $FRT, $FRA, $FRC, $FRB", FPGeneral,
[(set f32:$FRT, (fneg (fma f32:$FRA, f32:$FRC,
(fneg f32:$FRB))))]>;
}
// FSEL is artificially split into 4 and 8-byte forms for the result. To avoid
// having 4 of these, force the comparison to always be an 8-byte double (code
// should use an FMRSD if the input comparison value really wants to be a float)
// and 4/8 byte forms for the result and operand type..
def FSELD : AForm_1<63, 23,
(outs F8RC:$FRT), (ins F8RC:$FRA, F8RC:$FRC, F8RC:$FRB),
"fsel $FRT, $FRA, $FRC, $FRB", FPGeneral,
[(set f64:$FRT, (PPCfsel f64:$FRA, f64:$FRC, f64:$FRB))]>;
def FSELS : AForm_1<63, 23,
(outs F4RC:$FRT), (ins F8RC:$FRA, F4RC:$FRC, F4RC:$FRB),
"fsel $FRT, $FRA, $FRC, $FRB", FPGeneral,
[(set f32:$FRT, (PPCfsel f64:$FRA, f32:$FRC, f32:$FRB))]>;
let Uses = [RM] in {
def FADD : AForm_2<63, 21,
(outs F8RC:$FRT), (ins F8RC:$FRA, F8RC:$FRB),
"fadd $FRT, $FRA, $FRB", FPAddSub,
[(set f64:$FRT, (fadd f64:$FRA, f64:$FRB))]>;
def FADDS : AForm_2<59, 21,
(outs F4RC:$FRT), (ins F4RC:$FRA, F4RC:$FRB),
"fadds $FRT, $FRA, $FRB", FPGeneral,
[(set f32:$FRT, (fadd f32:$FRA, f32:$FRB))]>;
def FDIV : AForm_2<63, 18,
(outs F8RC:$FRT), (ins F8RC:$FRA, F8RC:$FRB),
"fdiv $FRT, $FRA, $FRB", FPDivD,
[(set f64:$FRT, (fdiv f64:$FRA, f64:$FRB))]>;
def FDIVS : AForm_2<59, 18,
(outs F4RC:$FRT), (ins F4RC:$FRA, F4RC:$FRB),
"fdivs $FRT, $FRA, $FRB", FPDivS,
[(set f32:$FRT, (fdiv f32:$FRA, f32:$FRB))]>;
def FMUL : AForm_3<63, 25,
(outs F8RC:$FRT), (ins F8RC:$FRA, F8RC:$FRC),
"fmul $FRT, $FRA, $FRC", FPFused,
[(set f64:$FRT, (fmul f64:$FRA, f64:$FRC))]>;
def FMULS : AForm_3<59, 25,
(outs F4RC:$FRT), (ins F4RC:$FRA, F4RC:$FRC),
"fmuls $FRT, $FRA, $FRC", FPGeneral,
[(set f32:$FRT, (fmul f32:$FRA, f32:$FRC))]>;
def FSUB : AForm_2<63, 20,
(outs F8RC:$FRT), (ins F8RC:$FRA, F8RC:$FRB),
"fsub $FRT, $FRA, $FRB", FPAddSub,
[(set f64:$FRT, (fsub f64:$FRA, f64:$FRB))]>;
def FSUBS : AForm_2<59, 20,
(outs F4RC:$FRT), (ins F4RC:$FRA, F4RC:$FRB),
"fsubs $FRT, $FRA, $FRB", FPGeneral,
[(set f32:$FRT, (fsub f32:$FRA, f32:$FRB))]>;
}
}
let PPC970_Unit = 1 in { // FXU Operations.
def ISEL : AForm_4<31, 15,
(outs GPRC:$rT), (ins GPRC_NOR0:$rA, GPRC:$rB, pred:$cond),
"isel $rT, $rA, $rB, $cond", IntGeneral,
[]>;
}
let PPC970_Unit = 1 in { // FXU Operations.
// M-Form instructions. rotate and mask instructions.
//
let isCommutable = 1 in {
// RLWIMI can be commuted if the rotate amount is zero.
def RLWIMI : MForm_2<20,
(outs GPRC:$rA), (ins GPRC:$rSi, GPRC:$rS, u5imm:$SH, u5imm:$MB,
u5imm:$ME), "rlwimi $rA, $rS, $SH, $MB, $ME", IntRotate,
[]>, PPC970_DGroup_Cracked, RegConstraint<"$rSi = $rA">,
NoEncode<"$rSi">;
}
def RLWINM : MForm_2<21,
(outs GPRC:$rA), (ins GPRC:$rS, u5imm:$SH, u5imm:$MB, u5imm:$ME),
"rlwinm $rA, $rS, $SH, $MB, $ME", IntGeneral,
[]>;
def RLWINMo : MForm_2<21,
(outs GPRC:$rA), (ins GPRC:$rS, u5imm:$SH, u5imm:$MB, u5imm:$ME),
"rlwinm. $rA, $rS, $SH, $MB, $ME", IntGeneral,
[]>, isDOT, PPC970_DGroup_Cracked;
def RLWNM : MForm_2<23,
(outs GPRC:$rA), (ins GPRC:$rS, GPRC:$rB, u5imm:$MB, u5imm:$ME),
"rlwnm $rA, $rS, $rB, $MB, $ME", IntGeneral,
[]>;
}
//===----------------------------------------------------------------------===//
// PowerPC Instruction Patterns
//
// Arbitrary immediate support. Implement in terms of LIS/ORI.
def : Pat<(i32 imm:$imm),
(ORI (LIS (HI16 imm:$imm)), (LO16 imm:$imm))>;
// Implement the 'not' operation with the NOR instruction.
def NOT : Pat<(not i32:$in),
(NOR $in, $in)>;
// ADD an arbitrary immediate.
def : Pat<(add i32:$in, imm:$imm),
(ADDIS (ADDI $in, (LO16 imm:$imm)), (HA16 imm:$imm))>;
// OR an arbitrary immediate.
def : Pat<(or i32:$in, imm:$imm),
(ORIS (ORI $in, (LO16 imm:$imm)), (HI16 imm:$imm))>;
// XOR an arbitrary immediate.
def : Pat<(xor i32:$in, imm:$imm),
(XORIS (XORI $in, (LO16 imm:$imm)), (HI16 imm:$imm))>;
// SUBFIC
def : Pat<(sub immSExt16:$imm, i32:$in),
(SUBFIC $in, imm:$imm)>;
// SHL/SRL
def : Pat<(shl i32:$in, (i32 imm:$imm)),
(RLWINM $in, imm:$imm, 0, (SHL32 imm:$imm))>;
def : Pat<(srl i32:$in, (i32 imm:$imm)),
(RLWINM $in, (SRL32 imm:$imm), imm:$imm, 31)>;
// ROTL
def : Pat<(rotl i32:$in, i32:$sh),
(RLWNM $in, $sh, 0, 31)>;
def : Pat<(rotl i32:$in, (i32 imm:$imm)),
(RLWINM $in, imm:$imm, 0, 31)>;
// RLWNM
def : Pat<(and (rotl i32:$in, i32:$sh), maskimm32:$imm),
(RLWNM $in, $sh, (MB maskimm32:$imm), (ME maskimm32:$imm))>;
// Calls
def : Pat<(PPCcall (i32 tglobaladdr:$dst)),
(BL tglobaladdr:$dst)>;
def : Pat<(PPCcall (i32 texternalsym:$dst)),
(BL texternalsym:$dst)>;
def : Pat<(PPCtc_return (i32 tglobaladdr:$dst), imm:$imm),
(TCRETURNdi tglobaladdr:$dst, imm:$imm)>;
def : Pat<(PPCtc_return (i32 texternalsym:$dst), imm:$imm),
(TCRETURNdi texternalsym:$dst, imm:$imm)>;
def : Pat<(PPCtc_return CTRRC:$dst, imm:$imm),
(TCRETURNri CTRRC:$dst, imm:$imm)>;
// Hi and Lo for Darwin Global Addresses.
def : Pat<(PPChi tglobaladdr:$in, 0), (LIS tglobaladdr:$in)>;
def : Pat<(PPClo tglobaladdr:$in, 0), (LI tglobaladdr:$in)>;
def : Pat<(PPChi tconstpool:$in, 0), (LIS tconstpool:$in)>;
def : Pat<(PPClo tconstpool:$in, 0), (LI tconstpool:$in)>;
def : Pat<(PPChi tjumptable:$in, 0), (LIS tjumptable:$in)>;
def : Pat<(PPClo tjumptable:$in, 0), (LI tjumptable:$in)>;
def : Pat<(PPChi tblockaddress:$in, 0), (LIS tblockaddress:$in)>;
def : Pat<(PPClo tblockaddress:$in, 0), (LI tblockaddress:$in)>;
def : Pat<(PPChi tglobaltlsaddr:$g, i32:$in),
(ADDIS $in, tglobaltlsaddr:$g)>;
def : Pat<(PPClo tglobaltlsaddr:$g, i32:$in),
(ADDIL $in, tglobaltlsaddr:$g)>;
def : Pat<(add i32:$in, (PPChi tglobaladdr:$g, 0)),
(ADDIS $in, tglobaladdr:$g)>;
def : Pat<(add i32:$in, (PPChi tconstpool:$g, 0)),
(ADDIS $in, tconstpool:$g)>;
def : Pat<(add i32:$in, (PPChi tjumptable:$g, 0)),
(ADDIS $in, tjumptable:$g)>;
def : Pat<(add i32:$in, (PPChi tblockaddress:$g, 0)),
(ADDIS $in, tblockaddress:$g)>;
// Standard shifts. These are represented separately from the real shifts above
// so that we can distinguish between shifts that allow 5-bit and 6-bit shift
// amounts.
def : Pat<(sra i32:$rS, i32:$rB),
(SRAW $rS, $rB)>;
def : Pat<(srl i32:$rS, i32:$rB),
(SRW $rS, $rB)>;
def : Pat<(shl i32:$rS, i32:$rB),
(SLW $rS, $rB)>;
def : Pat<(zextloadi1 iaddr:$src),
(LBZ iaddr:$src)>;
def : Pat<(zextloadi1 xaddr:$src),
(LBZX xaddr:$src)>;
def : Pat<(extloadi1 iaddr:$src),
(LBZ iaddr:$src)>;
def : Pat<(extloadi1 xaddr:$src),
(LBZX xaddr:$src)>;
def : Pat<(extloadi8 iaddr:$src),
(LBZ iaddr:$src)>;
def : Pat<(extloadi8 xaddr:$src),
(LBZX xaddr:$src)>;
def : Pat<(extloadi16 iaddr:$src),
(LHZ iaddr:$src)>;
def : Pat<(extloadi16 xaddr:$src),
(LHZX xaddr:$src)>;
def : Pat<(f64 (extloadf32 iaddr:$src)),
(COPY_TO_REGCLASS (LFS iaddr:$src), F8RC)>;
def : Pat<(f64 (extloadf32 xaddr:$src)),
(COPY_TO_REGCLASS (LFSX xaddr:$src), F8RC)>;
def : Pat<(f64 (fextend f32:$src)),
(COPY_TO_REGCLASS $src, F8RC)>;
// Memory barriers
def : Pat<(membarrier (i32 imm /*ll*/),
(i32 imm /*ls*/),
(i32 imm /*sl*/),
(i32 imm /*ss*/),
(i32 imm /*device*/)),
(SYNC)>;
def : Pat<(atomic_fence (imm), (imm)), (SYNC)>;
include "PPCInstrAltivec.td"
include "PPCInstr64Bit.td"