This field specifies registers that are preserved across function calls,
but that should not be included in the generates SaveList array.
This can be used ot generate regmasks for architectures that save
registers through other means, like SPARC's register windows.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189084 91177308-0d34-0410-b5e6-96231b3b80d8
The current version of StripDeadDebugInfo became stale and no longer actually
worked since it was expecting an older version of debug info.
This patch updates it to use DebugInfoFinder and the modern DebugInfo classes as
much as possible to make it more redundent to such changes. Additionally, the
only place where that was avoided (the code where we replace the old sets with
the new), I call verify on the DIContextUnit implying that if the format changes
and my live set changes no longer make sense an assert will be hit. In order to
ensure that that occurs I have included a test case.
The actual stripping of the dead debug info follows the same strategy as was
used before in this class: find the live set and replace the old set in the
given compile unit (which may contain dead global variables/functions) with the
new live one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189078 91177308-0d34-0410-b5e6-96231b3b80d8
DFSan changes the ABI of each function in the module. This makes it possible
for a function with the native ABI to be called with the instrumented ABI,
or vice versa, thus possibly invoking undefined behavior. A simple way
of statically detecting instances of this problem is to prepend the prefix
"dfs$" to the name of each instrumented-ABI function.
This will not catch every such problem; in particular function pointers passed
across the instrumented-native barrier cannot be used on the other side.
These problems could potentially be caught dynamically.
Differential Revision: http://llvm-reviews.chandlerc.com/D1373
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189052 91177308-0d34-0410-b5e6-96231b3b80d8
This uses the ARMcmov pattern that Tim cleaned up in r188995.
Thanks to Simon Tatham for his floating point help!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189024 91177308-0d34-0410-b5e6-96231b3b80d8
The instruction to convert between floating point and fixed point representations
takes an immediate operand for the number of fractional bits of the fixed point
value. ARMARM specifies that when that number of bits is zero, the assembler
should encode floating point/integer conversion instructions.
This patch adds the necessary instruction aliases to achieve this behaviour.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189009 91177308-0d34-0410-b5e6-96231b3b80d8
using GEPs. Previously, it used a number of different heuristics for
analyzing the GEPs. Several of these were conservatively correct, but
failed to fall back to SCEV even when SCEV might have given a reasonable
answer. One was simply incorrect in how it was formulated.
There was good code already to recursively evaluate the constant offsets
in GEPs, look through pointer casts, etc. I gathered this into a form
code like the SLP code can use in a previous commit, which allows all of
this code to become quite simple.
There is some performance (compile time) concern here at first glance as
we're directly attempting to walk both pointers constant GEP chains.
However, a couple of thoughts:
1) The very common cases where there is a dynamic pointer, and a second
pointer at a constant offset (usually a stride) from it, this code
will actually not do any unnecessary work.
2) InstCombine and other passes work very hard to collapse constant
GEPs, so it will be rare that we iterate here for a long time.
That said, if there remain performance problems here, there are some
obvious things that can improve the situation immensely. Doing
a vectorizer-pass-wide memoizer for each individual layer of pointer
values, their base values, and the constant offset is likely to be able
to completely remove redundant work and strictly limit the scaling of
the work to scrape these GEPs. Since this optimization was not done on
the prior version (which would still benefit from it), I've not done it
here. But if folks have benchmarks that slow down it should be straight
forward for them to add.
I've added a test case, but I'm not really confident of the amount of
testing done for different access patterns, strides, and pointer
manipulation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189007 91177308-0d34-0410-b5e6-96231b3b80d8
The function call to external function should come with PLT relocation
type if the PIC relocation model is used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189002 91177308-0d34-0410-b5e6-96231b3b80d8
pointers, but accumulate the offset into an APInt in the process of
stripping it.
This is a pretty handy thing to have, such as when trying to determine
if two pointers are at some constant relative offset. I'll be committing
a patch shortly to use it for exactly that purpose.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189000 91177308-0d34-0410-b5e6-96231b3b80d8
Back in the mists of time (2008), it seems TableGen couldn't handle the
patterns necessary to match ARM's CMOV node that we convert select operations
to, so we wrote a lot of fairly hairy C++ to do it for us.
TableGen can deal with it now: there were a few minor differences to CodeGen
(see tests), but nothing obviously worse that I could see, so we should
probably address anything that *does* come up in a localised manner.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188995 91177308-0d34-0410-b5e6-96231b3b80d8
The code for 'Q' and 'R' operand modifiers needs to look through tied
operands to discover the register class.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188990 91177308-0d34-0410-b5e6-96231b3b80d8
Indirect tail-calls shouldn't use R9 for the branch destination, as
it's not reliably a call-clobbered register.
rdar://14793425
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188967 91177308-0d34-0410-b5e6-96231b3b80d8
When truncated vector stores were being custom lowered in
VectorLegalizer::LegalizeOp(), the old (illegal) and new (legal) node pair
was not being added to LegalizedNodes list. Instead of the legalized
result being passed to VectorLegalizer::TranslateLegalizeResult(),
the result was being passed back into VectorLegalizer::LegalizeOp(),
which ended up adding a (new, new) pair to the list instead.
This was causing an assertion failure when a custom lowered truncated
vector store was the last instruction a basic block and the VectorLegalizer
was unable to find it in the LegalizedNodes list when updating the
DAG root.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188953 91177308-0d34-0410-b5e6-96231b3b80d8
The small utility function that pattern matches Base + Index +
Offset patterns for loads and stores fails to recognize the base
pointer for loads/stores from/into an array at offset 0 inside a
loop. As a result DAGCombiner::MergeConsecutiveStores was not able
to merge all stores.
This commit fixes the issue by adding an additional pattern match
and also a test case.
Reviewer: Nadav
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188936 91177308-0d34-0410-b5e6-96231b3b80d8
def imm0_63 : Operand<i32>, ImmLeaf<i32, [{ return Imm >= 0 && Imm < 63;}]>{
As it seems Imm <63 should be Imm <= 63. ImmLeaf is used in pattern match, but there is already a function check the shift amount range, so just remove ImmLeaf. Also add a test to check 63.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188911 91177308-0d34-0410-b5e6-96231b3b80d8
Offset in mmap(3) should be aligned to gepagesize(), 64k, or mmap(3) would fail.
TODO: Invetigate places where 4096 would be required as pagesize, or 4096 would satisfy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188903 91177308-0d34-0410-b5e6-96231b3b80d8
According to the ARM specification, "mov" is a valid mnemonic for all Thumb2 MOV encodings.
To achieve this, the patch adds one instruction alias with a special range condition to avoid collision with the Thumb1 MOV.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188901 91177308-0d34-0410-b5e6-96231b3b80d8
The initial port used MLG(R) for i64 UMUL_LOHI but left the other three
combinations as not-legal-or-custom. Although 32x32->{32,32}
multiplications exist, they're not as quick as doing a normal 64-bit
multiplication, so it didn't seem like i32 SMUL_LOHI and UMUL_LOHI
would be useful. There's also no direct instruction for i64 SMUL_LOHI,
so it needs to be implemented in terms of UMUL_LOHI.
However, not defining these patterns means that we don't convert
division by a constant into multiplication, so this patch fills
in the other cases. The new i64 SMUL_LOHI sequence is simpler
than the one that we used previously for 64x64->128 multiplication,
so int-mul-08.ll now tests the full sequence.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188898 91177308-0d34-0410-b5e6-96231b3b80d8
I accidentally changed the encoding of the MSA registers to zero instead of 0
to 31. This change restores the encoding the registers had prior to r188893.
This didn't show up in the existing tests because direct-object emission isn't
implemented yet for MSA.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188896 91177308-0d34-0410-b5e6-96231b3b80d8
These are extensions of the existing FI[EDX]BR instructions, but use a spare
bit to suppress inexact conditions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188894 91177308-0d34-0410-b5e6-96231b3b80d8
Like yaml ObjectFiles, this will be very useful for testing the MC CFG
implementation (mostly MCObjectDisassembler), by matching the output
with YAML, and for potential users of the MC CFG, by using it as an input.
There isn't much to the actual format, it is just a serialization of the
MCModule class. Of note:
- Basic block references (pred/succ, ..) are represented by the BB's
start address.
- Just as in the MC CFG, instructions are MCInsts with a size.
- Operands have a prefix representing the type (only register and
immediate supported here).
- Instruction opcodes are represented by their names; enum values aren't
stable, enum names mostly are: usually, a change to a name would need
lots of changes in the backend anyway.
Same with registers.
All in all, an example is better than 1000 words, here goes:
A simple binary:
Disassembly of section __TEXT,__text:
_main:
100000f9c: 48 8b 46 08 movq 8(%rsi), %rax
100000fa0: 0f be 00 movsbl (%rax), %eax
100000fa3: 3b 04 25 48 00 00 00 cmpl 72, %eax
100000faa: 0f 8c 07 00 00 00 jl 7 <.Lend>
100000fb0: 2b 04 25 48 00 00 00 subl 72, %eax
.Lend:
100000fb7: c3 ret
And the (pretty verbose) generated YAML:
---
Atoms:
- StartAddress: 0x0000000100000F9C
Size: 20
Type: Text
Content:
- Inst: MOV64rm
Size: 4
Ops: [ RRAX, RRSI, I1, R, I8, R ]
- Inst: MOVSX32rm8
Size: 3
Ops: [ REAX, RRAX, I1, R, I0, R ]
- Inst: CMP32rm
Size: 7
Ops: [ REAX, R, I1, R, I72, R ]
- Inst: JL_4
Size: 6
Ops: [ I7 ]
- StartAddress: 0x0000000100000FB0
Size: 7
Type: Text
Content:
- Inst: SUB32rm
Size: 7
Ops: [ REAX, REAX, R, I1, R, I72, R ]
- StartAddress: 0x0000000100000FB7
Size: 1
Type: Text
Content:
- Inst: RET
Size: 1
Ops: [ ]
Functions:
- Name: __text
BasicBlocks:
- Address: 0x0000000100000F9C
Preds: [ ]
Succs: [ 0x0000000100000FB7, 0x0000000100000FB0 ]
<snip>
...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188890 91177308-0d34-0410-b5e6-96231b3b80d8
Supports:
- entrypoint, using LC_MAIN.
- static ctors/dtors, using __mod_{init,exit}_func
- translation between effective and object load address, using
dyld's VM address slide.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188886 91177308-0d34-0410-b5e6-96231b3b80d8
It can now disassemble code in situations where the effective load
address is different than the load address declared in the object file.
This happens for PIC, hence "dynamic".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188884 91177308-0d34-0410-b5e6-96231b3b80d8
This is the behavior of sequential disassemblers (llvm-objdump, ...),
when there is no instruction size hint (fixed-length, ...)
While there, also do some minor cleanup.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188883 91177308-0d34-0410-b5e6-96231b3b80d8
When an MCTextAtom is split, all MCBasicBlocks backed by it are
automatically split, with a fallthrough between both blocks, and
the successors moved to the second block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188881 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
LLVM would generate DWARF with version 3 in the .debug_pubname and
.debug_pubtypes version fields. This would lead SGI dwarfdump to fail
parsing the DWARF with (in the instance of .debug_pubnames) would exit
with:
dwarfdump ERROR: dwarf_get_globals: DW_DLE_PUBNAMES_VERSION_ERROR (123)
This fixes PR16950.
Reviewers: echristo, dblaikie
Reviewed By: echristo
CC: cfe-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1454
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188869 91177308-0d34-0410-b5e6-96231b3b80d8
There are situations which can affect the correctness (or at least expectation)
of the gcov output. For instance, if a call to __gcov_flush() occurs within a
block before the execution count is registered and then the program aborts in
some way, then that block will not be marked as executed. This is not normally
what the user expects.
If we move the code that's registering when a block is executed to the
beginning, we can catch these types of situations.
PR16893
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188849 91177308-0d34-0410-b5e6-96231b3b80d8
size of floating point registers is 64-bit.
Test case will be added when support for mfhc1 and mthc1 is added.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188847 91177308-0d34-0410-b5e6-96231b3b80d8
point registers. We will need this register class later when we add
definitions for instructions mfhc1 and mthc1. Also, remove sub-register indices
sub_fpeven and sub_fpodd and use sub_lo and sub_hi instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188842 91177308-0d34-0410-b5e6-96231b3b80d8
Update iterator when the SLP vectorizer changes the instructions in the basic
block by restarting the traversal of the basic block.
Patch by Yi Jiang!
Fixes PR 16899.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188832 91177308-0d34-0410-b5e6-96231b3b80d8
load/store instructions defined. Previously, we were defining load/store
instructions for each pointer size (32 and 64-bit), but now we need just one
definition.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188830 91177308-0d34-0410-b5e6-96231b3b80d8
functions be compiled as mips32, without having to add attributes. This
is useful in certain situations where you don't want to have to edit the
function attributes in the source. For now it's only an option used for
the compiler developers when debugging the mips16 port.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188826 91177308-0d34-0410-b5e6-96231b3b80d8
Update testcase to be more careful about checking register
values. While regexes are general goodness for these sorts of
testcases, in this example, the registers are constrained by
the calling convention, so we can and should check their
explicit values.
rdar://14779513
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188819 91177308-0d34-0410-b5e6-96231b3b80d8
SystemZTargetLowering::emitStringWrapper() previously loaded the character
into R0 before the loop and made R0 live on entry. I'd forgotten that
allocatable registers weren't allowed to be live across blocks at this stage,
and it confused LiveVariables enough to cause a miscompilation of f3 in
memchr-02.ll.
This patch instead loads R0 in the loop and leaves LICM to hoist it
after RA. This is actually what I'd tried originally, but I went for
the manual optimisation after noticing that R0 often wasn't being hoisted.
This bug forced me to go back and look at why, now fixed as r188774.
We should also try to optimize null checks so that they test the CC result
of the SRST directly. The select between null and the SRST GPR result could
then usually be deleted as dead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188779 91177308-0d34-0410-b5e6-96231b3b80d8
Post-RA LICM keeps three sets of registers: PhysRegDefs, PhysRegClobbers
and TermRegs. When it sees a definition of R it adds all aliases of R
to the corresponding set, so that when it needs to test for membership
it only needs to test a single register, rather than worrying about
aliases there too. E.g. the final candidate loop just has:
unsigned Def = Candidates[i].Def;
if (!PhysRegClobbers.test(Def) && ...) {
to test whether register Def is multiply defined.
However, there was also a shortcut in ProcessMI to make sure we didn't
add candidates if we already knew that they would fail the final test.
This shortcut was more pessimistic than the final one because it
checked whether _any alias_ of the defined register was multiply defined.
This is too conservative for targets that define register pairs.
E.g. on z, R0 and R1 are sometimes used as a pair, so there is a
128-bit register that aliases both R0 and R1. If a loop used
R0 and R1 independently, and the definition of R0 came first,
we would be able to hoist the R0 assignment (because that used
the final test quoted above) but not the R1 assignment (because
that meant we had two definitions of the paired R0/R1 register
and would fail the shortcut in ProcessMI).
This patch just uses the same check for the ProcessMI shortcut as
we use in the final candidate loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188774 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we used a const-pool load for virtually all 64-bit floating values.
Actually, we can get quite a few common values (including 0.0, 1.0) via "vmov"
instructions of one stripe or another.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188773 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, generation of stack protectors was done exclusively in the
pre-SelectionDAG Codegen LLVM IR Pass "Stack Protector". This necessitated
splitting basic blocks at the IR level to create the success/failure basic
blocks in the tail of the basic block in question. As a result of this,
calls that would have qualified for the sibling call optimization were no
longer eligible for optimization since said calls were no longer right in
the "tail position" (i.e. the immediate predecessor of a ReturnInst
instruction).
Then it was noticed that since the sibling call optimization causes the
callee to reuse the caller's stack, if we could delay the generation of
the stack protector check until later in CodeGen after the sibling call
decision was made, we get both the tail call optimization and the stack
protector check!
A few goals in solving this problem were:
1. Preserve the architecture independence of stack protector generation.
2. Preserve the normal IR level stack protector check for platforms like
OpenBSD for which we support platform specific stack protector
generation.
The main problem that guided the present solution is that one can not
solve this problem in an architecture independent manner at the IR level
only. This is because:
1. The decision on whether or not to perform a sibling call on certain
platforms (for instance i386) requires lower level information
related to available registers that can not be known at the IR level.
2. Even if the previous point were not true, the decision on whether to
perform a tail call is done in LowerCallTo in SelectionDAG which
occurs after the Stack Protector Pass. As a result, one would need to
put the relevant callinst into the stack protector check success
basic block (where the return inst is placed) and then move it back
later at SelectionDAG/MI time before the stack protector check if the
tail call optimization failed. The MI level option was nixed
immediately since it would require platform specific pattern
matching. The SelectionDAG level option was nixed because
SelectionDAG only processes one IR level basic block at a time
implying one could not create a DAG Combine to move the callinst.
To get around this problem a few things were realized:
1. While one can not handle multiple IR level basic blocks at the
SelectionDAG Level, one can generate multiple machine basic blocks
for one IR level basic block. This is how we handle bit tests and
switches.
2. At the MI level, tail calls are represented via a special return
MIInst called "tcreturn". Thus if we know the basic block in which we
wish to insert the stack protector check, we get the correct behavior
by always inserting the stack protector check right before the return
statement. This is a "magical transformation" since no matter where
the stack protector check intrinsic is, we always insert the stack
protector check code at the end of the BB.
Given the aforementioned constraints, the following solution was devised:
1. On platforms that do not support SelectionDAG stack protector check
generation, allow for the normal IR level stack protector check
generation to continue.
2. On platforms that do support SelectionDAG stack protector check
generation:
a. Use the IR level stack protector pass to decide if a stack
protector is required/which BB we insert the stack protector check
in by reusing the logic already therein. If we wish to generate a
stack protector check in a basic block, we place a special IR
intrinsic called llvm.stackprotectorcheck right before the BB's
returninst or if there is a callinst that could potentially be
sibling call optimized, before the call inst.
b. Then when a BB with said intrinsic is processed, we codegen the BB
normally via SelectBasicBlock. In said process, when we visit the
stack protector check, we do not actually emit anything into the
BB. Instead, we just initialize the stack protector descriptor
class (which involves stashing information/creating the success
mbbb and the failure mbb if we have not created one for this
function yet) and export the guard variable that we are going to
compare.
c. After we finish selecting the basic block, in FinishBasicBlock if
the StackProtectorDescriptor attached to the SelectionDAGBuilder is
initialized, we first find a splice point in the parent basic block
before the terminator and then splice the terminator of said basic
block into the success basic block. Then we code-gen a new tail for
the parent basic block consisting of the two loads, the comparison,
and finally two branches to the success/failure basic blocks. We
conclude by code-gening the failure basic block if we have not
code-gened it already (all stack protector checks we generate in
the same function, use the same failure basic block).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188755 91177308-0d34-0410-b5e6-96231b3b80d8
(Patch committed on behalf of Mark Minich, whose log entry follows.)
This is a continuation of the refactorings performed in svn rev 188573
(see that rev's comments for more detail).
This is my stage 2 refactoring: I combined the emitPrologue() &
emitEpilogue() PPC32 & PPC64 code into a single flow, simplifying a
lot of the code since in essence the PPC32 & PPC64 code generation
logic is the same, only the instruction forms are different (in most
cases). This simplification is necessary because my functional changes
(yet to come) add significant complexity, and without the
simplification of my stage 2 refactoring, the overall complexity of
both emitPrologue() & emitEpilogue() would have become almost
intractable for most mortal programmers (like me).
This submission was intended to be a pure refactoring (no functional
changes whatsoever). However, in the process of combining the PPC32 &
PPC64 flows, I spotted a difference that I believe is a bug (see svn
rev 186478 line 863, or svn rev 188573 line 888): This line appears to
be restoring the BP with the original FP content, not the original BP
content. When I merged the 32-bit and 64-bit code, I used the
corresponding code from the 64-bit flow, which I believe uses the
correct offset (BPOffset) for this operation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188741 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a llvm.copysign intrinsic; We already have Libfunc recognition for
copysign (which is turned into the FCOPYSIGN SDAG node). In order to
autovectorize calls to copysign in the loop vectorizer, we need a corresponding
intrinsic as well.
In addition to the expected changes to the language reference, the loop
vectorizer, BasicTTI, and the SDAG builder (the intrinsic is transformed into
an FCOPYSIGN node, just like the function call), this also adds FCOPYSIGN to a
few lists in LegalizeVector{Ops,Types} so that vector copysigns can be
expanded.
In TargetLoweringBase::initActions, I've made the default action for FCOPYSIGN
be Expand for vector types. This seems correct for all in-tree targets, and I
think is the right thing to do because, previously, there was no way to generate
vector-values FCOPYSIGN nodes (and most targets don't specify an action for
vector-typed FCOPYSIGN).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188728 91177308-0d34-0410-b5e6-96231b3b80d8
copysign/copysignf never become function calls (because the SDAG expansion code
does not lower to the corresponding function call, but rather directly
implements the associated logic), but copysignl almost always is lowered into a
call to the requested libm functon (and, thus, might clobber CTR).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188727 91177308-0d34-0410-b5e6-96231b3b80d8
Also fix it calculating the wrong value. The struct index
is not a ConstantInt, so it was being interpreted as an array
index.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188713 91177308-0d34-0410-b5e6-96231b3b80d8
Until gdb supports the new accelerator tables we should add the
pubnames section so that gdb_index can be generated from gold
at link time. On darwin we already emit the accelerator tables
and so don't need to worry about pubnames.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188708 91177308-0d34-0410-b5e6-96231b3b80d8
- split WidenVecRes_Binary into WidenVecRes_Binary and WidenVecRes_BinaryCanTrap
- WidenVecRes_BinaryCanTrap preserves the original behaviour for operations
that can trap
- WidenVecRes_Binary simply widens the operation and improves codegen for
3-element vectors by allowing widening and promotion on x86 (matches the
behaviour of unary and ternary operation widening)
- use WidenVecRes_Binary for operations on integers.
Reviewed by: nrotem
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188699 91177308-0d34-0410-b5e6-96231b3b80d8
The Thumb2 add immediate is in fact defined for SP. The manual is misleading as it points to a different section for add immediate with SP, however the encoding is the same as for add immediate with register only with the SP operand hard coded. As such add immediate with SP and add immediate with register can safely be treated as the same instruction.
All the patch does is adjust a register constraint on an instruction alias.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188676 91177308-0d34-0410-b5e6-96231b3b80d8
For now this matches the equivalent of (neg (abs ...)), which did hit a few
times in projects/test-suite. We should probably also match cases where
absolute-like selects are used with reversed arguments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188671 91177308-0d34-0410-b5e6-96231b3b80d8
This first cut is pretty conservative. The final argument register (R6)
is call-saved, so we would need to make sure that the R6 argument to a
sibling call is the same as the R6 argument to the calling function,
which seems worth keeping as a separate patch.
Saying that integer truncations are free means that we no longer
use the extending instructions LGF and LLGF for spills in int-conv-09.ll
and int-conv-10.ll. Instead we treat the registers as 64 bits wide and
truncate them to 32-bits where necessary. I think it's unlikely we'd
use LGF and LLGF for spills in other situations for the same reason,
so I'm removing the tests rather than replacing them. The associated
code is generic and applies to many more instructions than just
LGF and LLGF, so there is no corresponding code removal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188669 91177308-0d34-0410-b5e6-96231b3b80d8
We had previously been asserting when faced with a FCOPYSIGN f64, ppcf128 node
because there was no way to expand the FCOPYSIGN node. Because ppcf128 is the
sum of two doubles, and the first double must have the larger magnitude, we
can take the sign from the first double. As a result, in addition to fixing the
crash, this is also an optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188655 91177308-0d34-0410-b5e6-96231b3b80d8
Modern PPC cores support a floating-point copysign instruction, and we can use
this to lower the FCOPYSIGN node (which is created from calls to the libm
copysign function). A couple of extra patterns are necessary because the
operand types of FCOPYSIGN need not agree.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188653 91177308-0d34-0410-b5e6-96231b3b80d8
This reduces the noise in diffs making it more likely that, at least for
LLVM revision-over-revision, diffs will actually yield usable results.
This is consistent with objdump's DWARF dumping behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188650 91177308-0d34-0410-b5e6-96231b3b80d8
We check this in many/all other cases, just missed this one it seems.
Perhaps it'd be worth unifying this so we never emit zero-length
DW_AT_names.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188649 91177308-0d34-0410-b5e6-96231b3b80d8
When patching inlineasm nodes to use GPRPair for 64-bit values, we
were dropping the information that two operands were tied, which
effectively broke the live-interval of vregs affected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188643 91177308-0d34-0410-b5e6-96231b3b80d8
allocated by setupterm. Without this, some folks are seeing leaked
memory whenever this routine is called more than once. Thanks to Craig
Topper for the report.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188615 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes SCEVExpander so that it does not create multiple distinct induction
variables for duplicate PHI entries. Specifically, given some code like this:
do.body6: ; preds = %do.body6, %do.body6, %if.then5
%end.0 = phi i8* [ undef, %if.then5 ], [ %incdec.ptr, %do.body6 ], [ %incdec.ptr, %do.body6 ]
...
Note that it is legal to have multiple entries for a basic block so long as the
associated value is the same. So the above input is okay, but expanding an
AddRec in this loop could produce code like this:
do.body6: ; preds = %do.body6, %do.body6, %if.then5
%indvar = phi i64 [ %indvar.next, %do.body6 ], [ %indvar.next1, %do.body6 ], [ 0, %if.then5 ]
%end.0 = phi i8* [ undef, %if.then5 ], [ %incdec.ptr, %do.body6 ], [ %incdec.ptr, %do.body6 ]
...
%indvar.next = add i64 %indvar, 1
%indvar.next1 = add i64 %indvar, 1
And this is not legal because there are two PHI entries for %do.body6 each with
a distinct value.
Unfortunately, I don't have an in-tree test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188614 91177308-0d34-0410-b5e6-96231b3b80d8
Properly constrain the operand register class for instructions used
in [sz]ext expansion. Update more tests to use the verifier now that
we're getting the register classes correct.
rdar://12594152
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188594 91177308-0d34-0410-b5e6-96231b3b80d8
Teach the generic instruction selection helper functions to constrain
the register classes of their input operands. For non-physical register
references, the generic code needs to be careful not to mess that up
when replacing references to result registers. As the comment indicates
for MachineRegisterInfo::replaceRegWith(), it's important to call
constrainRegClass() first.
rdar://12594152
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188593 91177308-0d34-0410-b5e6-96231b3b80d8
Lots of machine verifier errors result from using a plain GPR regclass
for incoming argument copies. A more restrictive rGPR class is more
appropriate since it more accurately represents what's happening, plus
it lines up better with isel later on so the verifier is happier.
Reduces the number of ARM fast-isel tests not running with the verifier
enabled by over half.
rdar://12594152
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188592 91177308-0d34-0410-b5e6-96231b3b80d8
This regards how mips16 is viewed. It's not really a target type but
there has always been a target for it in the td files. It's more properly
-mcpu=mips32 -mattr=+mips16 . This is how clang treats it but we have
always had the -mcpu=mips16 which I probably should delete now but it will
require updating all the .ll test cases for mips16. In this case it changed
how we decide if we have a count bits instruction and whether instruction
lowering should then expand ctlz. Now that we have dual mode compilation,
-mattr=+mips16 really just indicates the inital processor mode that
we are compiling for. (It is also possible to have -mcpu=64 -mattr=+mips16
but as far as I know, nobody has even built such a processor, though there
is an architecture manual for this).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188586 91177308-0d34-0410-b5e6-96231b3b80d8
Clang doesn't support the MSVC __cpuid intrinsic yet, and fixing that is
blocked on some fairly complicated issues.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188584 91177308-0d34-0410-b5e6-96231b3b80d8
