This changes the tests that were targeting ARM EABI to explicitly specify the
environment rather than relying on the default. This breaks with the new
Windows on ARM support when running the tests on Windows where the default
environment is no longer EABI.
Take the opportunity to avoid a pointless redirect (helps when trying to debug
with providing a command line invocation which can be copy and pasted) and
removing a few greps in favour of FileCheck.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205541 91177308-0d34-0410-b5e6-96231b3b80d8
Implementing this via ComputeMaskedBits has two advantages:
+ It actually works. DAGISel doesn't deal with the chains properly
in the previous pattern-based solution, so they never trigger.
+ The information can be used in other DAG combines, as well as the
trivial "get rid of truncs". For example if the trunc is in a
different basic block.
rdar://problem/16227836
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205540 91177308-0d34-0410-b5e6-96231b3b80d8
The terminal barrier of a cmpxchg expansion will be either Acquire or
SequentiallyConsistent. In either case it can be skipped if the
operation has Monotonic requirements on failure.
rdar://problem/15996804
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205535 91177308-0d34-0410-b5e6-96231b3b80d8
The previous situation where ATOMIC_LOAD_WHATEVER nodes were expanded
at MachineInstr emission time had grown to be extremely large and
involved, to account for the subtly different code needed for the
various flavours (8/16/32/64 bit, cmpxchg/add/minmax).
Moving this transformation into the IR clears up the code
substantially, and makes future optimisations much easier:
1. an atomicrmw followed by using the *new* value can be more
efficient. As an IR pass, simple CSE could handle this
efficiently.
2. Making use of cmpxchg success/failure orderings only has to be done
in one (simpler) place.
3. The common "cmpxchg; did we store?" idiom can be exposed to
optimisation.
I intend to gradually improve this situation within the ARM backend
and make sure there are no hidden issues before moving the code out
into CodeGen to be shared with (at least ARM64/AArch64, though I think
PPC & Mips could benefit too).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205525 91177308-0d34-0410-b5e6-96231b3b80d8
add operation since extract_vector_elt can perform an extend operation. Get the input lane
type from the vector on which we're performing the vpaddl operation on and extend or
truncate it to the output type of the original add node.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205523 91177308-0d34-0410-b5e6-96231b3b80d8
opportunities in the current basic block, rather than just the last one seen.
<rdar://problem/16478629>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205481 91177308-0d34-0410-b5e6-96231b3b80d8
This changes the tests that were targeting ARM EABI to explicitly specify the
environment rather than relying on the default. This breaks with the new
Windows on ARM support when running the tests on Windows where the default
environment is no longer EABI.
Take the opportunity to avoid a pointless redirect (helps when trying to debug
with providing a command line invocation which can be copy and pasted) and
removing a few greps in favour of FileCheck.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205465 91177308-0d34-0410-b5e6-96231b3b80d8
Update the subtarget information for Windows on ARM. This enables using the MC
layer to target Windows on ARM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205459 91177308-0d34-0410-b5e6-96231b3b80d8
Unlike other v6+ processors, cortex-m0 never supports unaligned accesses.
From the v6m ARM ARM:
"A3.2 Alignment support: ARMv6-M always generates a fault when an unaligned
access occurs."
rdar://16491560
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205452 91177308-0d34-0410-b5e6-96231b3b80d8
Adds the instructions ext/ext32/cins/cins32.
It also changes pop/dpop to accept the two operand version and
adds a simple pattern to generate baddu.
Tests for the two operand versions (including baddu/dmul/dpop/pop)
and the code generation pattern for baddu are included.
Reviewed by: Daniel.Sanders@imgtec.com
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205449 91177308-0d34-0410-b5e6-96231b3b80d8
Weak symbols cannot use the small code model's usual ADRP sequences since the
instruction simply may not be able to encode a value of 0.
This redirects them to use the GOT, which hopefully linkers are able to cope
with even in the static relocation model.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205426 91177308-0d34-0410-b5e6-96231b3b80d8
We were creating libcall nodes that returned an MVT::f128, when these
particular operations actually return an int of some stripe.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205425 91177308-0d34-0410-b5e6-96231b3b80d8
Again, coalescing and other optimisations swiftly made the MachineInstrs
consistent again, but when compiled at -O0 a bad INSERT_SUBREGISTER was
produced.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205423 91177308-0d34-0410-b5e6-96231b3b80d8
The previous attempt was fine with optimisations, but was actually rather
cavalier with its types. When compiled at -O0, it produced invalid COPY
MachineInstrs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205422 91177308-0d34-0410-b5e6-96231b3b80d8
ARM specific optimiztion, finding places in ARM machine code where 2 dmbs
follow one another, and eliminating one of them.
Patch by Reinoud Elhorst.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205409 91177308-0d34-0410-b5e6-96231b3b80d8
Identical to Win32 method except the GS segment register is used for TLS
instead of FS and pvArbitrary is at TEB offset 0x28 instead of 0x14.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205342 91177308-0d34-0410-b5e6-96231b3b80d8
The Cyclone CPU is similar to swift for most LLVM purposes, but does have two
preferred instructions for zeroing a VFP register. This teaches LLVM about
them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205309 91177308-0d34-0410-b5e6-96231b3b80d8
This moves one case of raw text checking down into the MCStreamer
interfaces in the form of a virtual function, even if we ultimately end
up consolidating on the one-or-many line tables issue one day, this is
nicer in the interim. This just generally streamlines a bunch of use
cases into a common code path.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205287 91177308-0d34-0410-b5e6-96231b3b80d8
This commit updates the stackmap format to version 1 to indicate the
reorganizaion of several fields. This was done in order to align stackmap
entries to their natural alignment and to minimize padding.
Fixes <rdar://problem/16005902>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205254 91177308-0d34-0410-b5e6-96231b3b80d8
If we have two unique values for a v2i64 build vector, this will always result
in two vector loads if we expand using shuffles. Only one is necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205231 91177308-0d34-0410-b5e6-96231b3b80d8
This is a more thorough fix for the issue than r203483. An IR pass will run
before NVPTX codegen to make sure there are no invalid symbol names that can't
be consumed by the ptxas assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205212 91177308-0d34-0410-b5e6-96231b3b80d8
This allows allows us to replace ISD::EXTRACT_ELEMENT, which is lowered
using shifts, with ISD::EXTRACT_VECTOR_ELT, which is a no-op.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205187 91177308-0d34-0410-b5e6-96231b3b80d8
When the loop vectorizer vectorizes code that uses the loop induction variable,
we often end up with IR like this:
%b1 = insertelement <2 x i32> undef, i32 %v, i32 0
%b2 = shufflevector <2 x i32> %b1, <2 x i32> undef, <2 x i32> zeroinitializer
%i = add <2 x i32> %b2, <i32 2, i32 3>
If the add in this example is not legal (as is the case on PPC with VSX), it
will be scalarized, and we'll end up with a number of extract_vector_elt nodes
with the vector shuffle as the input operand, and that vector shuffle is fed by
one or more build_vector nodes. By the time that vector operations are
expanded, visitEXTRACT_VECTOR_ELT will not create new extract_vector_elt by
looking through the vector shuffle (to make sure that no illegal operations are
created), and so the extract_vector_elt -> vector shuffle -> build_vector is
never simplified to an operand of the build vector.
By looking at build_vectors through a shuffle we fix this particular situation,
preventing a vector from being built, only to be deconstructed again (for the
scalarized add) -- an expensive proposition when this all needs to be done via
the stack. We probably want a more comprehensive fix here where we look back
recursively through any shuffles to any build_vectors or scalar_to_vectors,
etc. but that can come later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205179 91177308-0d34-0410-b5e6-96231b3b80d8
While reviewing r204163, I noticed that the MIPS16 test only checked for a .ent
directive and didn't actually check the code emitted. Fixed this and added a
check for llvm.bswap.i32 on MIPS64 at the same time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205177 91177308-0d34-0410-b5e6-96231b3b80d8
