E.g. the codegen result is
fmls v1.2s, v0.2s, v2.s[3]
which is expected to be
fmls v0.2s, v1.2s, v2.s[3]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198001 91177308-0d34-0410-b5e6-96231b3b80d8
...namely LOAD AND ADD, LOAD AND AND, LOAD AND OR and LOAD AND EXCLUSIVE OR.
LOAD AND ADD LOGICAL isn't really separately useful for LLVM.
I'll look at adding reusing the CC results in new year.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197985 91177308-0d34-0410-b5e6-96231b3b80d8
DAG.getVectorShuffle() doesn't always return a vector_shuffle node.
If mask is the exact sequence of it's operand(For example, operand_0
is v8i8, and the mask is 0, 1, 2, 3, 4, 5, 6, 7), it will directly
return that operand. So a check is added here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197967 91177308-0d34-0410-b5e6-96231b3b80d8
This failure caused by improper condition when lowering shuffle_vector
to scalar_to_vector. After this patch NEON_VDUP with v1i64 will not
be generated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197966 91177308-0d34-0410-b5e6-96231b3b80d8
Check for single use of fmul node in fused multiply patterns
to allow generation of fused multiply add/sub instructions.
Otherwise fmul operation ends up being repeated more than
once which does not help peformance on targets with
only one MAC unit, as for example cortex-a53.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197929 91177308-0d34-0410-b5e6-96231b3b80d8
The correct pattern matching should be:
- fnmadd is (-Ra) + (-Rn)*Rm which should be matched as:
fma (fneg node:$Rn), node:$Rm, (fneg node:$Ra) and as
(f32 (fsub (f32 (fneg FPR32:$Ra)), (f32 (fmul FPR32:$Rn, FPR32:$Rm))))
- fnmsub is (-Ra) + Rn*Rm which should be matched as
fma node:$Rn, node:$Rm, (fneg node:$Ra) and as
(f32 (fsub (f32 (fmul FPR32:$Rn, FPR32:$Rm)), FPR32:$Ra))))
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197928 91177308-0d34-0410-b5e6-96231b3b80d8
Split sadd.with.overflow into add + sadd.with.overflow to allow
analysis and optimization. This should ideally be done after
InstCombine, which can perform code motion (eventually indvars should
run after all canonical instcombines). We want ISEL to recombine the
add and the check, at least on x86.
This is currently under an option for reducing live induction
variables: -liv-reduce. The next step is reducing liveness of IVs that
are live out of the overflow check paths. Once the related
optimizations are fully developed, reviewed and tested, I do expect
this to become default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197926 91177308-0d34-0410-b5e6-96231b3b80d8
(optional) DWARF sections, so compiling with -g does not result in
different code being generated.
rdar://problem/15623193
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197922 91177308-0d34-0410-b5e6-96231b3b80d8
The bkpt mnemonic has an implicit immediate constant of 0 unless otherwise
specified. Add an instruction alias for the unvalued breakpoint mnemonic to
treat it as a 0. This improves compatibility with GNU AS.
Signed-off-by: Saleem Abdulrasool <compnerd@compnerd.org>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197913 91177308-0d34-0410-b5e6-96231b3b80d8
If the Scalarizer scalarized a vector PHI but could not scalarize
all uses of it, it would insert a series of insertelements to reconstruct
the vector PHI value from the scalar ones. The problem was that it would
emit these insertelements immediately after the PHI, even if there were
other PHIs after it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197909 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Before this change the instrumented code before Ret instructions looked like:
<Unpoison Frame Redzones>
if (Frame != OriginalFrame) // I.e. Frame is fake
<Poison Complete Frame>
Now the instrumented code looks like:
if (Frame != OriginalFrame) // I.e. Frame is fake
<Poison Complete Frame>
else
<Unpoison Frame Redzones>
Reviewers: eugenis
Reviewed By: eugenis
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2458
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197907 91177308-0d34-0410-b5e6-96231b3b80d8
Backends like OptParserEmitter assume that record names can be used as valid
identifiers.
The period '.' in generated anonymous names broke that assumption, causing a
build-time error and in practice forcing all records to be named.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197869 91177308-0d34-0410-b5e6-96231b3b80d8
If the extension of a loaded value is compared against zero and used in
other arithmetic, InstCombine will change the comparison to use the
unextended load. It's also possible that the comparison could be against
the unextended load from the outset.
In DAG form this becomes a truncation of an extending load. We want to
strip the truncation if possible so that we can use load-and-test instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197804 91177308-0d34-0410-b5e6-96231b3b80d8
The handling of ANY_EXTEND and ZERO_EXTEND was too strict. In this context
we can treat ZERO_EXTEND in much the same way as an AND and then also handle
outermost ZERO_EXTENDs.
I couldn't find a test that benefited from the ANY_EXTEND change, but it's
more obvious to write it this way once SIGN_EXTEND and ZERO_EXTEND are
handled differently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197802 91177308-0d34-0410-b5e6-96231b3b80d8
If we happen to eliminate every case in a switch that has branch
weights, we currently try to create metadata for the one remaining
branch, triggering an assert. Instead, we need to check that the
metadata we're trying to create is sensible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197791 91177308-0d34-0410-b5e6-96231b3b80d8
The .pool directive is an alias for the .ltorg directive used to create a
literal pool. Simply treat .pool as if .ltorg was passed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197787 91177308-0d34-0410-b5e6-96231b3b80d8
v2: Add ftrunc->TRUNC pattern instead of replacing int_AMDGPU_trunc
v3: move ftrunc pattern next to TRUNC definition, it's available since R600
Patch By: Jan Vesely
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197783 91177308-0d34-0410-b5e6-96231b3b80d8
when you want to have the full list of addresses for a particular CU or
when you have multiple modules linked together and can't depend upon the
ordering of a single CU for begin/end ranges.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197776 91177308-0d34-0410-b5e6-96231b3b80d8
this commit as the only one on the Blamelist so I quickly reverted this.
However it was actually Nick's change who has since fixed that issue.
Original commit message:
Changed the X86 assembler for intel syntax to work with directional labels.
The X86 assembler as a separate code to parser the intel assembly syntax
in X86AsmParser::ParseIntelOperand(). This did not parse directional labels.
And if something like 1f was used as a branch target it would get an
"Unexpected token" error.
The fix starts in X86AsmParser::ParseIntelExpression() in the case for
AsmToken::Integer, it needs to grab the IntVal from the current token
then look for a 'b' or 'f' following an Integer. Then it basically needs to
do what is done in AsmParser::parsePrimaryExpr() for directional
labels. It saves the MCExpr it creates in the IntelExprStateMachine
in the Sym field.
When it returns to X86AsmParser::ParseIntelOperand() it looks
for a non-zero Sym field in the IntelExprStateMachine and if
set it creates a memory operand not an immediate operand
it would normally do for the Integer.
rdar://14961158
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197744 91177308-0d34-0410-b5e6-96231b3b80d8
The X86 assembler has a separate code to parser the intel assembly syntax
in X86AsmParser::ParseIntelOperand(). This did not parse directional labels.
And if something like 1f was used as a branch target it would get an
"Unexpected token" error.
The fix starts in X86AsmParser::ParseIntelExpression() in the case for
AsmToken::Integer, it needs to grab the IntVal from the current token
then look for a 'b' or 'f' following the Integer. Then it basically needs to
do what is done in AsmParser::parsePrimaryExpr() for directional
labels. It saves the MCExpr it creates in the IntelExprStateMachine
in the Sym field.
When it returns to X86AsmParser::ParseIntelOperand() it looks
for a non-zero Sym field in the IntelExprStateMachine and if
set it creates a memory operand not an immediate operand
it would normally do for the Integer.
rdar://14961158
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197728 91177308-0d34-0410-b5e6-96231b3b80d8
The condition in selects is supposed to be i1.
Make sure we are just reading the less significant bit
of the 8 bits width value to match this constraint.
<rdar://problem/15651765>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197712 91177308-0d34-0410-b5e6-96231b3b80d8
This directive will write out the assembler-maintained constant
pool for the current section. These constant pools are created to
support the ldr-pseudo instruction (e.g. ldr r0, =val).
The directive can be used by the programmer to place the constant
pool in a location that can be reached by a pc-relative offset in
the ldr instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197711 91177308-0d34-0410-b5e6-96231b3b80d8
The ldr-pseudo opcode is a convenience for loading 32-bit constants.
It is converted into a pc-relative load from a constant pool. For
example,
ldr r0, =0x10001
ldr r1, =bar
will generate this output in the final assembly
ldr r0, .Ltmp0
ldr r1, .Ltmp1
...
.Ltmp0: .long 0x10001
.Ltmp1: .long bar
Sketch of the LDR pseudo implementation:
Keep a map from Section => ConstantPool
When parsing ldr r0, =val
parse val as an MCExpr
get ConstantPool for current Section
Label = CreateTempSymbol()
remember val in ConstantPool at next free slot
add operand to ldr that is MCSymbolRef of Label
On finishParse() callback
Write out all non-empty constant pools
for each Entry in ConstantPool
Emit Entry.Label
Emit Entry.Value
Possible improvements to be added in a later patch:
1. Does not convert load of small constants to mov
(e.g. ldr r0, =0x1 => mov r0, 0x1)
2. Does reuse constant pool entries for same constant
The implementation was tested for ARM, Thumb1, and Thumb2 targets on
linux and darwin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197708 91177308-0d34-0410-b5e6-96231b3b80d8
The tests for the disassembler were adapted from the encoder tests, and for the
most part, the output from the disassembler matches that encoder-test inputs.
There are some places where more-informative mnemonics could be produced
(notably for the branch instructions), and those cases are noted in the tests
with FIXMEs.
Future work includes:
- Generating more-informative mnemonics when possible (this may also be done
in the printer).
- Remove the dependence on positional "numbered" operand-to-variable mapping
(for both encoding and decoding).
- Internally using 64-bit instruction variants in 64-bit mode (if this turns
out to matter).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197693 91177308-0d34-0410-b5e6-96231b3b80d8
Currently SplitBlockAndInsertIfThen requires that branch condition is an
Instruction itself, which is very inconvenient, because it is sometimes an
Operator, or even a Constant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197677 91177308-0d34-0410-b5e6-96231b3b80d8
Rationale: going to land D2425 shortly.
I'll re-land these COFF files along with D2425 to simplify the SVN history
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197673 91177308-0d34-0410-b5e6-96231b3b80d8
Different sized address spaces should theoretically work
most of the time now, and since 64-bit add is currently
disabled, using more 32-bit pointers fixes some cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197659 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the .inst directive. This is an ARM specific directive to
indicate an instruction encoded as a constant expression. The major difference
between .word, .short, or .byte and .inst is that the latter will be
disassembled as an instruction since it does not get flagged as data.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197657 91177308-0d34-0410-b5e6-96231b3b80d8
This changes the MachineFrameInfo API to use the new SSPLayoutKind information
produced by the StackProtector pass (instead of a boolean flag) and updates a
few pass dependencies (to preserve the SSP analysis).
The stack layout follows the same approach used prior to this change - i.e.,
only LargeArray stack objects will be placed near the canary and everything
else will be laid out normally. After this change, structures containing large
arrays will also be placed near the canary - a case previously missed by the
old implementation.
Out of tree targets will need to update their usage of
MachineFrameInfo::CreateStackObject to remove the MayNeedSP argument.
The next patch will implement the rules for sspstrong and sspreq. The end goal
is to support ssp-strong stack layout rules.
WIP.
Differential Revision: http://llvm-reviews.chandlerc.com/D2158
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197653 91177308-0d34-0410-b5e6-96231b3b80d8
The inalloca attribute is designed to support passing C++ objects by
value in the Microsoft C++ ABI. It behaves the same as byval, except
that it always implies that the argument is in memory and that the bytes
are never copied. This attribute allows the caller to take the address
of an outgoing argument's memory and execute arbitrary code to store
into it.
This patch adds basic IR support, docs, and verification. It does not
attempt to implement any lowering or fix any possibly broken transforms.
When this patch lands, a complete description of this feature should
appear at http://llvm.org/docs/InAlloca.html .
Differential Revision: http://llvm-reviews.chandlerc.com/D2173
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197645 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to the file summaries, the function summaries output line,
branching and call statistics. The file summaries have been moved
outside the initial loop so that all of the function summaries can be
outputted before file summaries.
Also updated test cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197633 91177308-0d34-0410-b5e6-96231b3b80d8
tail call optimization. Some more work may be needed for indirect
calls but this patch fixes the current regression in Prolangc++/trees.
S2 optimization as part of the general cleanup and optimization
of prolog and epilog was not saving S2 in this case and needed to.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197630 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r197466.
The MachineCSE fix that required the -mcpu flag has been disabled
until more work can be done to fix downstream issues. Adding -mcpu
wasn't the right workaround anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197624 91177308-0d34-0410-b5e6-96231b3b80d8
Given vsel_cc, op1, op2, since vsel has no LE/LT, to generate vsel for
such selection, it needs to inverse cc and swap op1 and op2. To inverse
cc, both L/G and E bits should be flipped.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197615 91177308-0d34-0410-b5e6-96231b3b80d8
File summaries will now be optionally outputted which will give line,
branching and call coverage info. Unfortunately, clang's current
instrumentation does not give enough information to deduce function
calls, something that gcc is able to do. Thus, no calls are always
outputted to be consistent with gcov output.
Also updated tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197606 91177308-0d34-0410-b5e6-96231b3b80d8
This will cause llvm-cov to output branch counts instead of branch
probabilities. -b must be enabled.
Also updated tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197594 91177308-0d34-0410-b5e6-96231b3b80d8
1. The arch directive now appears before the cpu directive
2. Long run lines were split across multiple lines
No functional changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197588 91177308-0d34-0410-b5e6-96231b3b80d8
Clang sets the float-abi target option manually, but no longer
annotates each function with its ABI. This can lead to confusing
mistmatch between "clang -emit-llvm | llc" and normal clang
invocations.
Besides which, gnueabihf actually *is* hard-float. Defaulting to soft
was just perverse.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197554 91177308-0d34-0410-b5e6-96231b3b80d8
The .end directive indicates the end of the file. No further instructions are
processed after a .end directive is encountered.
One potential (glaringly obvious) optimisation that could be pursued here is to
extend MCAsmParser with a DiscardRemainder method to avoid processing lexemes to
the end of the file. It was unclear at this point if that would be worth
adding, and could easily be added in a follow on change.
Signed-off-by: Saleem Abdulrasool <compnerd@compnerd.org>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197547 91177308-0d34-0410-b5e6-96231b3b80d8
Without this, assembling clang's disassembly would produce an object
file with the IMAGE_SCN_CNT_INITIALIZED_DATA section characteristic
rather than the uninitialized one. link.exe would warn when merging
comdats with different flags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197529 91177308-0d34-0410-b5e6-96231b3b80d8
This effectively backs out r197465 but leaves some of the general
fixes in place. Not all targets are ready to handle this feature. To
enable it, some infrastructure work is needed to better handle
register class constraints.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197514 91177308-0d34-0410-b5e6-96231b3b80d8
This reapplies r197438 and fixes the link-time circular dependency between
IR and Support. The fix consists in moving the diagnostic support into IR.
The patch adds a new LLVMContext::diagnose that can be used to communicate to
the front-end, if any, that something of interest happened.
The diagnostics are supported by a new abstraction, the DiagnosticInfo class.
The base class contains the following information:
- The kind of the report: What this is about.
- The severity of the report: How bad this is.
This patch also adds 2 classes:
- DiagnosticInfoInlineAsm: For inline asm reporting. Basically, this diagnostic
will be used to switch to the new diagnostic API for LLVMContext::emitError.
- DiagnosticStackSize: For stack size reporting. Comes as a replacement of the
hard coded warning in PEI.
This patch also features dynamic diagnostic identifiers. In other words plugins
can use this infrastructure for their own diagnostics (for more details, see
getNextAvailablePluginDiagnosticKind).
This patch introduces a new DiagnosticHandlerTy and a new DiagnosticContext in
the LLVMContext that should be set by the front-end to be able to map these
diagnostics in its own system.
http://llvm-reviews.chandlerc.com/D2376
<rdar://problem/15515174>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197508 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r197481, recommiting r197469 with an extra fix.
The vastart_save_xmm_regs pseudo-instruction expands to a test and a
branch, so it modifies EFLAGS. Mark it so, or else the scheduler might
place it in the middle of another test+branch.
This fixes a bug exposed by r192750, which changed the initial scheduler
to source-order as part of enabling the MI Scheduler for X86.
This re-commit changes the VASTART_SAVE_XMM_REGS custom inserter not to
try to save %flags, and adds a test that catches the bad behavior of
r197469.
<rdar://problem/15627766>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197503 91177308-0d34-0410-b5e6-96231b3b80d8
http://llvm.org/bugs/show_bug.cgi?id=18045
Short issue description:
For X86 machines with sse < sse4.1 we got failures for some
particular load/store vector sequences:
$ clang-trunk -m32 -O2 test-case.c
fatal error: error in backend: Cannot select: 0x4200920: v4i32,ch = load 0x41d6ab0, 0x4205850,
0x41dcb10<LD16[getelementptr inbounds ([4 x i32]* @e, i32 0, i32 0)](align=4)> [ORD=82]
[ID=58]
0x4205850: i32 = X86ISD::Wrapper 0x41d5490 [ORD=26] [ID=43]
0x41d5490: i32 = TargetGlobalAddress<[4 x i32]* @e> 0 [ORD=26] [ID=23]
0x41dcb10: i32 = undef [ID=2]
The reason is that EltsFromConsecutiveLoads could emit such load instruction
both before and after legalize stage. Though this instruction is not legal for
machines with SSSE3 and lower.
The fix: In EltsFromConsecutiveLoads, if we have passed legalize stage, we
check whether nodes it emits are legal.
P.S.: If you get failure in time from 12:00 and till 22:00 (UTC-8),
perhaps I'll slow with response, so you better reject this commit. Thanks!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197492 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r197469.
The sanitizer and dragonegg buildbots are failing, I think because of
this change. Reverting until I figure out why.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197481 91177308-0d34-0410-b5e6-96231b3b80d8
The vastart_save_xmm_regs pseudo-instruction expands to a test and a
branch, so it modifies EFLAGS. Mark it so, or else the scheduler might
place it in the middle of another test+branch.
This fixes a bug exposed by r192750, which turned on the MI Scheduler
for X86.
<rdar://problem/15627766>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197469 91177308-0d34-0410-b5e6-96231b3b80d8
Without this, MachineCSE is powerless to handle redundant operations with truncated source operands.
This required fixing the 2-addr pass to handle tied subregisters. It isn't clear what combinations of subregisters can legally be tied, but the simple case of truncated source operands is now safely handled:
%vreg11<def> = COPY %vreg1:sub_32bit; GR32:%vreg11 GR64:%vreg1
%vreg12<def> = COPY %vreg2:sub_32bit; GR32:%vreg12 GR64:%vreg2
%vreg13<def,tied1> = ADD32rr %vreg11<tied0>, %vreg12<kill>, %EFLAGS<imp-def>
Test case: cse-add-with-overflow.ll.
This exposed an existing bug in
PPCInstrInfo::commuteInstruction. Thanks to Rafael for the test case:
PowerPC/crash.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197465 91177308-0d34-0410-b5e6-96231b3b80d8
A phi node operand or an instruction operand could be a constant expression that
can trap (division). Check that we don't vectorize such cases.
PR16729
radar://15653590
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197449 91177308-0d34-0410-b5e6-96231b3b80d8
The patch adds a new LLVMContext::diagnose that can be used to communicate to
the front-end, if any, that something of interest happened.
The diagnostics are supported by a new abstraction, the DiagnosticInfo class.
The base class contains the following information:
- The kind of the report: What this is about.
- The severity of the report: How bad this is.
This patch also adds 2 classes:
- DiagnosticInfoInlineAsm: For inline asm reporting. Basically, this diagnostic
will be used to switch to the new diagnostic API for LLVMContext::emitError.
- DiagnosticStackSize: For stack size reporting. Comes as a replacement of the
hard coded warning in PEI.
This patch also features dynamic diagnostic identifiers. In other words plugins
can use this infrastructure for their own diagnostics (for more details, see
getNextAvailablePluginDiagnosticKind).
This patch introduces a new DiagnosticHandlerTy and a new DiagnosticContext in
the LLVMContext that should be set by the front-end to be able to map these
diagnostics in its own system.
http://llvm-reviews.chandlerc.com/D2376
<rdar://problem/15515174>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197438 91177308-0d34-0410-b5e6-96231b3b80d8
Outputs branch information for unconditional branches in addition to
conditional branches. -b option must be enabled.
Also updated tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197432 91177308-0d34-0410-b5e6-96231b3b80d8
This allows the WebKit_JS calling convention to perform partial writes on a 4
byte granularity to stack slots.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197431 91177308-0d34-0410-b5e6-96231b3b80d8
that it coalesces normal copies.
Without this, MachineCSE is powerless to handle redundant operations
with truncated source operands.
This required fixing the 2-addr pass to handle tied subregisters. It
isn't clear what combinations of subregisters can legally be tied, but
the simple case of truncated source operands is now safely handled:
%vreg11<def> = COPY %vreg1:sub_32bit; GR32:%vreg11 GR64:%vreg1
%vreg12<def> = COPY %vreg2:sub_32bit; GR32:%vreg12 GR64:%vreg2
%vreg13<def,tied1> = ADD32rr %vreg11<tied0>, %vreg12<kill>, %EFLAGS<imp-def>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197414 91177308-0d34-0410-b5e6-96231b3b80d8
Added scalar compare VCMPSS, VCMPSD.
Implemented LowerSELECT for scalar FP operations.
I replaced FSETCCss, FSETCCsd with one node type FSETCCs.
Node extract_vector_elt(v16i1/v8i1, idx) returns an element of type i1.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197384 91177308-0d34-0410-b5e6-96231b3b80d8
Currently we have such types as legal vector types. The DAG combiner may generate some DAG nodes having such types but we don't have patterns to match them.
E.g. a load i32 and a bitcast i32 to v1i32 will be combined into a load v1i32:
bitcast (load i32) to v1i32 -> load v1i32.
So this patch fixes such problems for load/dup instructions.
If v1i8/v1i16/v1i32 are not legal any more, the code in this patch can be deleted. So I also add some FIXME.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197361 91177308-0d34-0410-b5e6-96231b3b80d8
Some tiny cosmetic code changes to follow. Because of the wide
ranging nature of the patch a full 24 test cycle was needed to
check against regression. This was the smallest patch I could
make to progress from the earlier ones in the series.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197350 91177308-0d34-0410-b5e6-96231b3b80d8
This is a base implementation of the powerpc-apple-darwin asm parser dialect.
* Enables infrastructure (essentially isDarwin()) and fixes up the parsing of asm directives to separate out ELF and MachO/Darwin additions.
* Enables parsing of {r,f,v}XX as register identifiers.
* Enables parsing of lo16() hi16() and ha16() as modifiers.
The changes to the test case are from David Fang (fangism).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197324 91177308-0d34-0410-b5e6-96231b3b80d8
This optional register liveness analysis pass can be enabled with either
-enable-stackmap-liveness, -enable-patchpoint-liveness, or both. The pass
traverses each basic block in a machine function. For each basic block the
instructions are processed in reversed order and if a patchpoint or stackmap
instruction is encountered the current live-out register set is encoded as a
register mask and attached to the instruction.
Later on during stackmap generation the live-out register mask is processed and
also emitted as part of the stackmap.
This information is optional and intended for optimization purposes only. This
will enable a client of the stackmap to reason about the registers it can use
and which registers need to be preserved.
Reviewed by Andy
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197317 91177308-0d34-0410-b5e6-96231b3b80d8
were falling into the cases for 24-bit branch kinds which are not 24-bit
branches. The routine is to return false for fixups are expected to always
be resolvable at assembly time. Which these three fixups are as they have
limited displacement and are for local references within a function.
rdar://15586725
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197282 91177308-0d34-0410-b5e6-96231b3b80d8
This commit does not complete the type units feature - there are issues
around fission support (skeletal type units, pubtypes/pubnames) and
hashing of some types including those containing references to types in
other type units.
Originally committed as r197073 and reverted in r197079.
Recommitted as r197197 to reproduce the failure and reverted as r197199
Turns out there was unstable ordering in the type unit dumping code.
Fixed by using MapVector in DWARFContext to store the debug_types
comdat sections.
Recommitted as r197210 with a fix to dumping and reverted as r197211
because I was a bit gun shy and thought I saw a failure that turned out
to be unrelated.
So here we go - once more with feeling! \o/
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197275 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r197254.
This was an accidental merge of Juergen's patch. It will be checked in
shortly, but wasn't meant to go in quite yet.
Conflicts:
include/llvm/CodeGen/StackMaps.h
lib/CodeGen/StackMaps.cpp
test/CodeGen/X86/stackmap-liveness.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197260 91177308-0d34-0410-b5e6-96231b3b80d8
The cpp backend is not a reasonable fallback for a missing target. It is a
very special backend, so it is reasonable to use it only if explicitly
requested.
While at it, simplify the interface a bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197241 91177308-0d34-0410-b5e6-96231b3b80d8
This originally came about after noticing that InstCombine turns
some of the TMHH (icmp (and...), ...) tests into plain comparisons.
Since there is no instruction to compare with a 64-bit immediate,
TMHH is generally better than an ordered comparison for the cases
that it can handle.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197238 91177308-0d34-0410-b5e6-96231b3b80d8
This patch makes more use of LPGFR and LNGFR. It builds on top of
the LTGFR selection from r197234. Most of the tests are motivated
by what InstCombine would produce.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197236 91177308-0d34-0410-b5e6-96231b3b80d8
InstCombine turns (sext (trunc)) into (ashr (shl)), then converts any
comparison of the ashr against zero into a comparison of the shl against zero.
This makes sense in itself, but we want to undo it for z, since the sign-
extension instruction has a CC-setting form.
I've included tests for both the original and InstCombined variants,
but the former already worked. The patch fixes the latter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197234 91177308-0d34-0410-b5e6-96231b3b80d8
While it's safe for the X86-specific shift nodes, dag combining will
kill generic nodes. Insert an AND to make it safe, isel will nuke it
as x86's shift instructions have an implicit AND.
Fixes PR16108, which contains a contraption to hit this case in between
constant folders.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197228 91177308-0d34-0410-b5e6-96231b3b80d8
branch instructions for mips and micromips instruction sets thus avoiding
the situation of generating branches to undesired locations if offsets
cannot be encoded.
This patch also checks if a fixup cannot be applied and returns a fatal error
if that's the case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197223 91177308-0d34-0410-b5e6-96231b3b80d8
through an invoke instruction.
The original patch for this was written by Mark Seaborn, but I've
reworked his test case into the existing returns_twice test case and
implemented the fix by the prior refactoring to actually run the cost
analysis over invoke instructions, and then here fixing our detection of
the returns_twice attribute to work for both calls and invokes. We never
noticed because we never saw an invoke. =[
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197216 91177308-0d34-0410-b5e6-96231b3b80d8
handles terminator instructions.
The inline cost analysis inheritted some pretty rough handling of
terminator insts from the original cost analysis, and then made it much,
much worse by factoring all of the important analyses into a separate
instruction visitor. That instruction visitor never visited the
terminator.
This works fine for things like conditional branches, but for many other
things we simply computed The Wrong Value. First example are
unconditional branches, which should be free but were counted as full
cost. This is most significant for conditional branches where the
condition simplifies and folds during inlining. We paid a 1 instruction
tax on every branch in a straight line specialized path. =[
Oh, we also claimed that the unreachable instruction had cost.
But it gets worse. Let's consider invoke. We never applied the call
penalty. We never accounted for the cost of the arguments. Nope. Worse
still, we didn't handle the *correctness* constraints of not inlining
recursive invokes, or exception throwing returns_twice functions. Oops.
See PR18206. Sadly, PR18206 requires yet another fix, but this
refactoring is at least a huge step in that direction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197215 91177308-0d34-0410-b5e6-96231b3b80d8
This commit does not complete the type units feature - there are issues
around fission support (skeletal type units, pubtypes/pubnames) and
hashing of some types including those containing references to types in
other type units.
Originally committed as r197073 and reverted in r197079.
Recommitted as r197197 to reproduce the failure and reverted as r197199
Turns out there was unstable ordering in the type unit dumping code.
Fixed by using MapVector in DWARFContext to store the debug_types
comdat sections.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197210 91177308-0d34-0410-b5e6-96231b3b80d8
Since gcc 4.6 the compiler uses ___chkstk_ms which has the same semantics as the
MS CRT function __chkstk. This simplifies the prologue generation a bit.
Reviewed by Rafael Espíndola.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197205 91177308-0d34-0410-b5e6-96231b3b80d8
This option tells llvm-cov to print out branch probabilities when
a basic block contains multiple branches. It also prints out some
function summary info including the number of times the function enters,
the percent of time it returns, and how many blocks were executed.
Also updated tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197198 91177308-0d34-0410-b5e6-96231b3b80d8
This commit does not complete the type units feature - there are issues
around fission support (skeletal type units, pubtypes/pubnames) and
hashing of some types including those containing references to types in
other type units.
Originally committed as r197073 and reverted in r197079.
This commit originally got jumbled up with another build-breaking commit
and I can't find the failures I thought this caused anymore.
Recommitting to hopefully get some clean buildbot results to work from.
I have a sneaking suspicion there's unstable output in the comdat group
output of MCStreamer...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197197 91177308-0d34-0410-b5e6-96231b3b80d8
GlobalOpt's CleanupConstantGlobalUsers function uses a worklist array to manage
constant users to be visited. The pointers in this array need to be weak
handles because when we delete a constant array, we may also be holding a
pointer to one of its elements (or an element of one of its elements if we're
dealing with an array of arrays) in the worklist.
Fixes PR17347.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197178 91177308-0d34-0410-b5e6-96231b3b80d8
- Copy patterns with float/double types are enough.
- Fix typos in test case names that were using v1fx.
- There is no ACLE intrinsic that uses v1f32 type. And there is no conflict of
neon and non-neon ovelapped operations with this type, so there is no need to
support operations with this type.
- Remove v1f32 from FPR32 register and disallow v1f32 as a legal type for
operations.
Patch by Ana Pazos!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197159 91177308-0d34-0410-b5e6-96231b3b80d8
a vector packed single/double fp operation followed by a vector insert.
The effect is that the backend coverts the packed fp instruction
followed by a vectro insert into a SSE or AVX scalar fp instruction.
For example, given the following code:
__m128 foo(__m128 A, __m128 B) {
__m128 C = A + B;
return (__m128) {c[0], a[1], a[2], a[3]};
}
previously we generated:
addps %xmm0, %xmm1
movss %xmm1, %xmm0
we now generate:
addss %xmm1, %xmm0
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197145 91177308-0d34-0410-b5e6-96231b3b80d8
Aside from a few minor latency corrections, the major change here is a new
hazard recognizer which focuses on better dispatch-group formation on the
POWER7. As with the PPC970's hazard recognizer, the most important thing it
does is avoid load-after-store hazards within the same dispatch group. It uses
the POWER7's special dispatch-group-terminating nop instruction (instead of
inserting multiple regular nop instructions). This new hazard recognizer makes
use of the scheduling dependency graph itself, built using AA information, to
robustly detect the possibility of load-after-store hazards.
significant test-suite performance changes (the error bars are 99.5% confidence
intervals based on 5 test-suite runs both with and without the change --
speedups are negative):
speedups:
MultiSource/Benchmarks/FreeBench/pcompress2/pcompress2
-0.55171% +/- 0.333168%
MultiSource/Benchmarks/TSVC/CrossingThresholds-dbl/CrossingThresholds-dbl
-17.5576% +/- 14.598%
MultiSource/Benchmarks/TSVC/Reductions-dbl/Reductions-dbl
-29.5708% +/- 7.09058%
MultiSource/Benchmarks/TSVC/Reductions-flt/Reductions-flt
-34.9471% +/- 11.4391%
SingleSource/Benchmarks/BenchmarkGame/puzzle
-25.1347% +/- 11.0104%
SingleSource/Benchmarks/Misc/flops-8
-17.7297% +/- 9.79061%
SingleSource/Benchmarks/Shootout-C++/ary3
-35.5018% +/- 23.9458%
SingleSource/Regression/C/uint64_to_float
-56.3165% +/- 25.4234%
SingleSource/UnitTests/Vectorizer/gcc-loops
-18.5309% +/- 6.8496%
regressions:
MultiSource/Benchmarks/ASCI_Purple/SMG2000/smg2000
18.351% +/- 12.156%
SingleSource/Benchmarks/Shootout-C++/methcall
27.3086% +/- 14.4733%
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197099 91177308-0d34-0410-b5e6-96231b3b80d8
The assertion was checking that the virtual register VReg used to represent the
physical register PReg uses the same register class as the one passed to
MachineFunction::addLiveIn.
This is over-constraining because it is sufficient to check that the register
class of VReg (VRegRC) is a subclass of the register class of PReg (PRegRC) and
that VRegRC contains PReg.
Indeed, if VReg gets constrained because of some operation constraints
between two calls of MachineFunction::addLiveIn, the original assertion
cannot match.
This fixes <rdar://problem/15633429>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197097 91177308-0d34-0410-b5e6-96231b3b80d8
For one predicate to subsume another, they must both check the same condition
register. Failure to check this prerequisite was causing miscompiles.
Fixes PR18003.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197089 91177308-0d34-0410-b5e6-96231b3b80d8
The linkers on these systems don't have anything special to do with these
symbols. Since the intent is for them to be absent from the final object,
just treat them as private.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197080 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r197073.
The test seems to be failing on some buildbots for unknown reasons.
Reverting until I can figure that out. If anyone's got a reproduction
(.s and .o together would be great) - I'd really appreciate it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197079 91177308-0d34-0410-b5e6-96231b3b80d8
This commit does not complete the type units feature - there are issues
around fission support (skeletal type units, pubtypes/pubnames) and
hashing of some types including those containing references to types in
other type units.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197073 91177308-0d34-0410-b5e6-96231b3b80d8
floating-point reciprocal square root step LLVM AArch64 intrinsics to
use f32/f64 types, rather than their vector equivalents.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197067 91177308-0d34-0410-b5e6-96231b3b80d8
point reciprocal exponent, and floating-point reciprocal square root estimate
LLVM AArch64 intrinsics to use f32/f64 types, rather than their vector
equivalents.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197066 91177308-0d34-0410-b5e6-96231b3b80d8
The tests were no longer using fast-isel at all (MachO needs an "ios" rather
than "darwin" triple at the moment and Linux needs ARM mode). Once that was
corrected, the verifier complained about a t2ADDri created for the alloca.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197046 91177308-0d34-0410-b5e6-96231b3b80d8
I moved a test from avx512-vbroadcast-crash.ll to avx512-vbroadcast.ll
I defined HasAVX512 predicate as AssemblerPredicate. It means that you should invoke llvm-mc with "-mcpu=knl" to get encoding for AVX-512 instructions. I need this to let AsmMatcher to set different encoding for AVX and AVX-512 instructions that have the same mnemonic and operands (all scalar instructions).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197041 91177308-0d34-0410-b5e6-96231b3b80d8
In such cases it's often better to test the result of the negation instead,
since the negation also sets CC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197032 91177308-0d34-0410-b5e6-96231b3b80d8
DAGCombiner could fold (truncate (load)) -> smaller load if the original
load was the width of the truncation result or wider. This patch extends
it to handle cases where the original load was narrower (and so the
extension type stays the same).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197030 91177308-0d34-0410-b5e6-96231b3b80d8
The combination of inline asm, stack realignment, and dynamic allocas
turns out to be too common to reject out of hand.
ASan inserts empy inline asm fragments and uses aligned allocas.
Compiling any trivial function containing a dynamic alloca with ASan is
enough to trigger the check.
XFAIL the test cases that would be miscompiled and add one that uses the
relevant functionality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196986 91177308-0d34-0410-b5e6-96231b3b80d8
This re-lands commit r196876, which was reverted in r196879.
The tests have been fixed to pass on platforms with a stack alignment
larger than 4.
Update to clang side tests will land shortly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196939 91177308-0d34-0410-b5e6-96231b3b80d8
immediately after SSE scalar fp instructions like addss or mulss.
Added patterns to select SSE scalar fp arithmetic instructions from a scalar
fp operation followed by a blend.
For example, given the following code:
__m128 foo(__m128 A, __m128 B) {
A[0] += B[0];
return A;
}
previously we generated:
addss %xmm0, %xmm1
movss %xmm1, %xmm0
now we generate:
addss %xmm1, %xmm0
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196925 91177308-0d34-0410-b5e6-96231b3b80d8
Save S2(reg 18) only when we are calling floating point stubs that
have a return value of float or complex. Some more work to make this
better but this is the first step.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196921 91177308-0d34-0410-b5e6-96231b3b80d8
One unusual feature of the z architecture is that the result of a
previous load can be reused indefinitely for subsequent loads, even if
a cache-coherent store to that location is performed by another CPU.
A special serializing instruction must be used if you want to force
a load to be reattempted.
Since volatile loads are not supposed to be omitted in this way,
we should insert a serializing instruction before each such load.
The same goes for atomic loads.
The patch implements this at the IR->DAG boundary, in a similar way
to atomic fences. It is a no-op for targets other than SystemZ.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196906 91177308-0d34-0410-b5e6-96231b3b80d8
One unusual feature of the z architecture is that the result of a
previous load can be reused indefinitely for subsequent loads, even if
a cache-coherent store to that location is performed by another CPU.
A special serializing instruction must be used if you want to force
a load to be reattempted.
Since volatile loads are not supposed to be omitted in this way,
we should insert a serializing instruction before each such load.
The same goes for atomic loads.
The patch implements this at the IR->DAG boundary, in a similar way
to atomic fences. It is a no-op for targets other than SystemZ.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196905 91177308-0d34-0410-b5e6-96231b3b80d8
For stack frames requiring realignment, three pointers may be needed:
- ebp to address incoming arguments
- esi (could be any callee-saved register) to address locals
- esp to address outgoing arguments
We would use esi unconditionally without verifying that it did not
conflict with inline assembly.
This change doesn't do the verification, it simply emits a fatal error
on functions that use stack realignment, dynamic SP adjustments, and
inline assembly.
Because stack realignment is common on Windows, we also no longer assume
that MS inline assembly clobbers esp. Instead, we analyze the inline
instructions for implicit definitions and check if esp is there. If so,
we require the use of a base pointer and consider it in the condition
above.
Mostly fixes PR16830, but we could try harder to find a non-conflicting
base pointer.
Reviewers: sunfish
Differential Revision: http://llvm-reviews.chandlerc.com/D1317
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196876 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to gcov, llvm-cov will now print out the block count at the end
of each block. Multiple blocks can end on the same line.
One computational difference is by using -a, llvm-cov will no longer
simply add the block counts together to form a line count. Instead, it
will take the maximum of the block counts on that line. This has a
similar effect to what gcov does, but generates more correct counts in
certain scenarios.
Also updated tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196856 91177308-0d34-0410-b5e6-96231b3b80d8
This avoids creating branch weight metadata of length one when we fold
cases into the default of a switch instruction, which was triggering
an assert.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196845 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Jiangning Liu.
With some test case changes:
- intrinsic test added to the existing /test/CodeGen/AArch64/neon-aba-abd.ll.
- New test cases to cover movi 1D scenario without using the intrinsic in
test/CodeGen/AArch64/neon-mov.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196806 91177308-0d34-0410-b5e6-96231b3b80d8
