- If destination is a physical register and it has a subreg index, use the
sub-register instead.
This fixes PR5423.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@88745 91177308-0d34-0410-b5e6-96231b3b80d8
target-specific AsmPrinters. Not all comments need DebugInfo.
Re-enable the line numbers comment test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@88697 91177308-0d34-0410-b5e6-96231b3b80d8
code-size win, and not when it's only likely to be code-size neutral,
such as when only a single instruction would be eliminated and a new
branch would be required.
This fixes rdar://7392894.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@88692 91177308-0d34-0410-b5e6-96231b3b80d8
D0<def,dead> = ...
...
= S0<use, kill>
S0<def> = ...
...
D0<def> =
The first D0 def is correctly marked dead, however, livevariables should have
added an implicit def of S0 or we end up with a use without a def.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@88690 91177308-0d34-0410-b5e6-96231b3b80d8
running IPSCCP early, and we run functionattrs interlaced with the inliner,
we often (particularly for small or noop functions) completely propagate
all of the information about a call to its call site in IPSSCP (making a call
dead) and functionattrs is smart enough to realize that the function is
readonly (because it is interlaced with inliner).
To improve compile time and make the inliner threshold more accurate, realize
that we don't have to inline dead readonly function calls. Instead, just
delete the call. This happens all the time for C++ codes, here are some
counters from opt/llvm-ld counting the number of times calls were deleted vs
inlined on various apps:
Tramp3d opt:
5033 inline - Number of call sites deleted, not inlined
24596 inline - Number of functions inlined
llvm-ld:
667 inline - Number of functions deleted because all callers found
699 inline - Number of functions inlined
483.xalancbmk opt:
8096 inline - Number of call sites deleted, not inlined
62528 inline - Number of functions inlined
llvm-ld:
217 inline - Number of allocas merged together
2158 inline - Number of functions inlined
471.omnetpp:
331 inline - Number of call sites deleted, not inlined
8981 inline - Number of functions inlined
llvm-ld:
171 inline - Number of functions deleted because all callers found
629 inline - Number of functions inlined
Deleting a call is much faster than inlining it, and is insensitive to the
size of the callee. :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86975 91177308-0d34-0410-b5e6-96231b3b80d8
cannot be folded into target cmp instruction.
- Avoid a phase ordering issue where early cmp optimization would prevent the
later count-to-zero optimization.
- Add missing checks which could cause LSR to reuse stride that does not have
users.
- Fix a bug in count-to-zero optimization code which failed to find the pre-inc
iv's phi node.
- Remove, tighten, loosen some incorrect checks disable valid transformations.
- Quite a bit of code clean up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86969 91177308-0d34-0410-b5e6-96231b3b80d8
tail merging support to handle more cases.
- Recognize several cases where tail merging is beneficial even when
the tail size is smaller than the generic threshold.
- Make use of MachineInstrDesc::isBarrier to help detect
non-fallthrough blocks.
- Check for and avoid disrupting fall-through edges in more cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86871 91177308-0d34-0410-b5e6-96231b3b80d8
llvm.invariant.start to be used without necessarily being paired with a call
to llvm.invariant.end. If you run the entire optimization pipeline then such
calls are in fact deleted (adce does it), but that's actually a good thing since
we probably do want them to be zapped late in the game. There should really be
an integration test that checks that the llvm.invariant.start call lasts long
enough that all passes that do interesting things with it get to do their stuff
before it is deleted. But since no passes do anything interesting with it yet
this will have to wait for later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86840 91177308-0d34-0410-b5e6-96231b3b80d8
constant whose component type is not a legal type for the target.
(If the target ConstantPool cannot handle this type either, it has
an opportunity to merge elements. In practice any target with
8-bit bytes must support i8 *as data*). 7320806 (partial).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86751 91177308-0d34-0410-b5e6-96231b3b80d8
generates a sequence similar to this:
__Z4funci:
LFB2:
mflr r0
LCFI0:
stmw r30,-8(r1)
LCFI1:
stw r0,8(r1)
LCFI2:
stwu r1,-80(r1)
LCFI3:
mr r30,r1
LCFI4:
where LCFI3 and LCFI4 are used by the FDE to indicate what the FP, LR, and other
things are. We generated something more like this:
Leh_func_begin1:
mflr r0
stw r31, 20(r1)
stw r0, 8(r1)
Llabel1:
stwu r1, -80(r1)
Llabel2:
mr r31, r1
Note that we are missing the "mr" instruction. This patch makes it more like the
GCC output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86729 91177308-0d34-0410-b5e6-96231b3b80d8
debug intrinsics, and an unconditional branch when possible. This
reuses the TryToSimplifyUncondBranchFromEmptyBlock function split
out of simplifycfg.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86722 91177308-0d34-0410-b5e6-96231b3b80d8
just one level deep. On the testcase we go from getting this:
F1: ; preds = %T2
%F = and i1 true, %cond ; <i1> [#uses=1]
br i1 %F, label %X, label %Y
to a fully threaded:
F1: ; preds = %T2
br label %Y
This changes gets us to the point where we're forming (too many) switch
instructions on doug's strswitch testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86646 91177308-0d34-0410-b5e6-96231b3b80d8
the loop. This is needed because with indirectbr it may not be possible
for LoopSimplify to guarantee that all loop exit predecessors are
inside the loop. This fixes PR5437.
LCCSA no longer actually requires LoopSimplify form, but for now it
must still have the dependency because the PassManager doesn't know
how to schedule LoopSimplify otherwise.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86569 91177308-0d34-0410-b5e6-96231b3b80d8
here:
1) We need to avoid processing sigma nodes as phi nodes for constraint generation.
2) We need to generate constraints for comparisons against constants properly.
This includes our first working ABCD test!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86498 91177308-0d34-0410-b5e6-96231b3b80d8
when both the source and dest are illegal types, since it would cause
the phi to grow (for example, we shouldn't transform test14b's phi to
a phi on i320). This fixes an infinite loop on i686 bootstrap with
phi slicing turned on, so turn it back on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86483 91177308-0d34-0410-b5e6-96231b3b80d8
Also, fix a few other details of the cmake test target and rename it to
'check'. CMake tests now work for the most part, but there are a handful of
failures left due to missing site.exp bits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86452 91177308-0d34-0410-b5e6-96231b3b80d8
not turn a PHI in a legal type into a PHI of an illegal type, and
add a new optimization that breaks up insane integer PHI nodes into
small pieces (PR3451).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86443 91177308-0d34-0410-b5e6-96231b3b80d8
1. rename the movhp patfrag to movlhps, since thats what it actually matches
2. eliminate the bogus movhps load and store patterns, they were incorrect. The load transforms are already handled (correctly) by shufps/unpack.
3. revert a recent test change to its correct form.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86415 91177308-0d34-0410-b5e6-96231b3b80d8
(eliminating some extends) if the new type of the
computation is legal or if both the source and dest
are illegal. This prevents instcombine from changing big
chains of computation into i64 on 32-bit targets for
example.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86398 91177308-0d34-0410-b5e6-96231b3b80d8
(making pred factoring only happen if threading is guaranteed
to be successful).
This now survives an X86-64 bootstrap of llvm-gcc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86355 91177308-0d34-0410-b5e6-96231b3b80d8
except it doesn't care if the definitions' virtual registers differ. This is
used by machine LICM and other MI passes to perform CSE.
- Teach Thumb2InstrInfo::isIdentical() to check two t2LDRpci_pic are identical.
Since pc relative constantpool entries are always different, this requires it
it check if the values can actually the same.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86328 91177308-0d34-0410-b5e6-96231b3b80d8
Here is the original commit message:
This commit updates malloc optimizations to operate on malloc calls that have constant int size arguments.
Update CreateMalloc so that its callers specify the size to allocate:
MallocInst-autoupgrade users use non-TargetData-computed allocation sizes.
Optimization uses use TargetData to compute the allocation size.
Now that malloc calls can have constant sizes, update isArrayMallocHelper() to use TargetData to determine the size of the malloced type and the size of malloced arrays.
Extend getMallocType() to support malloc calls that have non-bitcast uses.
Update OptimizeGlobalAddressOfMalloc() to optimize malloc calls that have non-bitcast uses. The bitcast use of a malloc call has to be treated specially here because the uses of the bitcast need to be replaced and the bitcast needs to be erased (just like the malloc call) for OptimizeGlobalAddressOfMalloc() to work correctly.
Update PerformHeapAllocSRoA() to optimize malloc calls that have non-bitcast uses. The bitcast use of the malloc is not handled specially here because ReplaceUsesOfMallocWithGlobal replaces through the bitcast use.
Update OptimizeOnceStoredGlobal() to not care about the malloc calls' bitcast use.
Update all globalopt malloc tests to not rely on autoupgraded-MallocInsts, but instead use explicit malloc calls with correct allocation sizes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86311 91177308-0d34-0410-b5e6-96231b3b80d8
load of a GV from constantpool and then add pc. It allows the code sequence to
be rematerializable so it would be hoisted by machine licm.
- Add a late pass to break these pseudo instructions into a number of real
instructions. Also move the code in Thumb2 IT pass that breaks up t2MOVi32imm
to this pass. This is done before post regalloc scheduling to allow the
scheduler to proper schedule these instructions. It also allow them to be
if-converted and shrunk by later passes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86304 91177308-0d34-0410-b5e6-96231b3b80d8
will not accept negative values for these. LLVM's default operand printing
sign extends values, so that valid unsigned values appear as negative
immediates. Print all VMOV immediate operands as hex values to resolve this.
Radar 7372576.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86301 91177308-0d34-0410-b5e6-96231b3b80d8
predicates. This allows us to jump thread things like:
_ZN12StringSwitchI5ColorE4CaseILj7EEERS1_RAT__KcRKS0_.exit119:
%tmp1.i24166 = phi i8 [ 1, %bb5.i117 ], [ %tmp1.i24165, %_Z....exit ], [ %tmp1.i24165, %bb4.i114 ]
%toBoolnot.i87 = icmp eq i8 %tmp1.i24166, 0 ; <i1> [#uses=1]
%tmp4.i90 = icmp eq i32 %tmp2.i, 6 ; <i1> [#uses=1]
%or.cond173 = and i1 %toBoolnot.i87, %tmp4.i90 ; <i1> [#uses=1]
br i1 %or.cond173, label %bb4.i96, label %_ZN12...
Where it is "obvious" that when coming from %bb5.i117 that the 'and' is always
false. This triggers a surprisingly high number of times in the testsuite,
and gets us closer to generating good code for doug's strswitch testcase.
This also make a bunch of other code in jump threading redundant, I'll rip
out in the next patch. This survived an enable-checking llvm-gcc bootstrap.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86264 91177308-0d34-0410-b5e6-96231b3b80d8
unsplittable critical edges, which means the introduction of
loops which cannot be transformed to LoopSimplify form. Fix
LoopSimplify to avoid transforming such loops into invalid
code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86176 91177308-0d34-0410-b5e6-96231b3b80d8
MallocInst-autoupgrade users use non-TargetData-computed allocation sizes.
Optimization uses use TargetData to compute the allocation size.
Now that malloc calls can have constant sizes, update isArrayMallocHelper() to use TargetData to determine the size of the malloced type and the size of malloced arrays.
Extend getMallocType() to support malloc calls that have non-bitcast uses.
Update OptimizeGlobalAddressOfMalloc() to optimize malloc calls that have non-bitcast uses. The bitcast use of a malloc call has to be treated specially here because the uses of the bitcast need to be replaced and the bitcast needs to be erased (just like the malloc call) for OptimizeGlobalAddressOfMalloc() to work correctly.
Update PerformHeapAllocSRoA() to optimize malloc calls that have non-bitcast uses. The bitcast use of the malloc is not handled specially here because ReplaceUsesOfMallocWithGlobal replaces through the bitcast use.
Update OptimizeOnceStoredGlobal() to not care about the malloc calls' bitcast use.
Update all globalopt malloc tests to not rely on autoupgraded-MallocInsts, but instead use explicit malloc calls with correct allocation sizes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86077 91177308-0d34-0410-b5e6-96231b3b80d8
and extract_subreg as a "copy" that defines a valno.
Also fixes a typo. These two issues prevent a simple subreg coalescing from
happening before.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86022 91177308-0d34-0410-b5e6-96231b3b80d8
to EmitGEPOffset.
Implement some new transforms for optimizing
subtracts of two pointer to ints into the same vector. This happens
for C++ iterator idioms for example, stringmap takes a const char*
that points to the start and end of a string. Once inlined, we want
the pointer difference to turn back into a length.
This is rdar://7362831.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86021 91177308-0d34-0410-b5e6-96231b3b80d8
more aggressive an correct. This survives building llvm in 64-bit
mode with optimizations and the built llvm passes make check.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85973 91177308-0d34-0410-b5e6-96231b3b80d8
functions that don't have local linkage. Basically, we need to be more
careful about propagating argument information to functions whose results
we aren't tracking. This fixes a miscompilation of
LLVMCConfigurationEmitter.cpp when built with an llvm-gcc that has ipsccp
enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85923 91177308-0d34-0410-b5e6-96231b3b80d8
the loop preheader. Add instructions which are already in the preheader block that
may be common expressions of those that are hoisted out. These does get a few more
instructions CSE'ed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85799 91177308-0d34-0410-b5e6-96231b3b80d8
function to calls of that function, regardless of whether it has local
linkage or has its address taken. Not escaping should only affect
whether we make an aggressive assumption about the arguments to a
function, not whether we can track the result of it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85795 91177308-0d34-0410-b5e6-96231b3b80d8
I don't know what Dan wants to do with phi-merge-gep.ll, I'll let
him deal with it because instcombine may end up sinking these.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85739 91177308-0d34-0410-b5e6-96231b3b80d8
not the max. This didn't matter until the previous patch because
instcombine would refuse to sink loads with differenting alignments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85738 91177308-0d34-0410-b5e6-96231b3b80d8
phis, it didn't preserve the alignment of the load. This is a missed
optimization of the alignment is high and a miscompilation when the
alignment is low.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85736 91177308-0d34-0410-b5e6-96231b3b80d8
ipconstprop and doesn't take much time. Just run it in its place.
This adds a testcase for it, which I plan to expand to cover other
"integration" cases, where we expect the optimizer to be able to
eliminate various things. Due to phase order issues we've regressed
in a number of areas and integration tests are the only way I see to
prevent this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85729 91177308-0d34-0410-b5e6-96231b3b80d8
the testcase into:
_test1: ## @test1
## BB#0: ## %entry
leaq L_test1_bb6(%rip), %rax
jmpq *%rax
L_test1_bb: ## Address Taken
LBB1_1: ## %bb
movb $1, %al
ret
L_test1_bb6: ## Address Taken
LBB1_2: ## %bb6
movb $2, %al
ret
Note, it is very very strange that BlockAddressSDNode doesn't carry
around TargetFlags. Dan, please fix this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85703 91177308-0d34-0410-b5e6-96231b3b80d8
is unconditional. Making it still use the libcall when optimizing for size
would be a good adjustment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85675 91177308-0d34-0410-b5e6-96231b3b80d8
MergeBlockIntoPredecessor. This makes SimplifyCFG slightly more aggressive,
and makes it unnecessary for LoopUnroll to have its own copy of this code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85667 91177308-0d34-0410-b5e6-96231b3b80d8
unfolding loads for hoisting. getOpcodeAfterMemoryUnfold returns the
opcode of the original operation without the load, not the load
itself, MachineLICM needs to know the operand index in order to get
the correct register class. Extend getOpcodeAfterMemoryUnfold to
return this information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85622 91177308-0d34-0410-b5e6-96231b3b80d8
void f (int a1, int a2, int a3, int a4, int a5,...)
In ARMTargetLowering::LowerFormalArguments if the function has 4 or
more regular arguments we used to set VarArgsFrameIndex using an
offset of 0, which is only correct if the function has exactly 4
regular arguments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85590 91177308-0d34-0410-b5e6-96231b3b80d8
ArraySize * ElementSize
ElementSize * ArraySize
ArraySize << log2(ElementSize)
ElementSize << log2(ArraySize)
Refactor isArrayMallocHelper and delete isSafeToGetMallocArraySize, so that there is only 1 copy of the malloc array determining logic.
Update users of getMallocArraySize() to not bother calling isArrayMalloc() as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85421 91177308-0d34-0410-b5e6-96231b3b80d8
round trip blockaddress through .ll and .bc files, so add a testcase.
There are still a bunch of places in the optimizer and other places
that need to be updated to work with these constructs, but at least
the basics are in now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85377 91177308-0d34-0410-b5e6-96231b3b80d8
