CoalescerPair can determine if a copy can be coalesced, and which register gets
merged away. The old logic in SimpleRegisterCoalescing had evolved into
something a bit too convoluted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106701 91177308-0d34-0410-b5e6-96231b3b80d8
void t(int *cp0, int *cp1, int *dp, int fmd) {
int c0, c1, d0, d1, d2, d3;
c0 = (*cp0++ & 0xffff) | ((*cp1++ << 16) & 0xffff0000);
c1 = (*cp0++ & 0xffff) | ((*cp1++ << 16) & 0xffff0000);
/* ... */
}
It code gens into something pretty bad. But with this change (analogous to the
X86 back-end), it will use ldm and generate few instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106693 91177308-0d34-0410-b5e6-96231b3b80d8
Given the pattern below as an example:
list<dag> Pattern = [(set RC:$dst, (v4f32 (shufp:src3 RC:$src1,
(mem_frag addr:$src2))))];
The right reference resolving should lead to:
list<dag> Pattern = [(set VR128:$dst, (v4f32 (shufp:src3 VR128:$src1,
(mem_frag addr:$src2))))];
But was yielding:
list<dag> Pattern = [(set VR128:$dst, (v4f32 (shufp VR128:$src1,
(mem_frag addr:$src2))))];
Fix this by passing the right name when creating a new DagInit node.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106670 91177308-0d34-0410-b5e6-96231b3b80d8
into the same node, but with different non-memory operands, we need to replace
the memory operands after it's finished morphing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106643 91177308-0d34-0410-b5e6-96231b3b80d8
Measurements show that it does not speed up coalescing, so there is no reason
the keep the added complexity around.
Also clean out some unused methods and static functions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106548 91177308-0d34-0410-b5e6-96231b3b80d8
opportunities. For example, this lets it emit this:
movq (%rax), %rcx
addq %rdx, %rcx
instead of this:
movq %rdx, %rcx
addq (%rax), %rcx
in the case where %rdx has subsequent uses. It's the same number
of instructions, and usually the same encoding size on x86, but
it appears faster, and in general, it may allow better scheduling
for the load.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106493 91177308-0d34-0410-b5e6-96231b3b80d8
This allows the fast regiser allocator to remove redundant
register moves.
Update a set of tests that depend on the register allocator
to be linear scan.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106420 91177308-0d34-0410-b5e6-96231b3b80d8
use sharing map. The reconcileNewOffset logic already forces a
separate use if the kinds differ, so incorporating the kind in the
key means we can track more sharing opportunities.
More sharing means fewer total uses to track, which means smaller
problem sizes, which means the conservative throttles don't kick
in as often.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106396 91177308-0d34-0410-b5e6-96231b3b80d8
assuming that loops are in canonical form, as ScalarEvolution doesn't
depend on LoopSimplify itself. Also, with indirectbr not all loops can
be simplified. This fixes PR7416.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106389 91177308-0d34-0410-b5e6-96231b3b80d8
- This fixed a number of bugs in if-converter, tail merging, and post-allocation
scheduler. If-converter now runs branch folding / tail merging first to
maximize if-conversion opportunities.
- Also changed the t2IT instruction slightly. It now defines the ITSTATE
register which is read by instructions in the IT block.
- Added Thumb2 specific hazard recognizer to ensure the scheduler doesn't
change the instruction ordering in the IT block (since IT mask has been
finalized). It also ensures no other instructions can be scheduled between
instructions in the IT block.
This is not yet enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106344 91177308-0d34-0410-b5e6-96231b3b80d8
instructions, but it doesn't really understand live ranges, so the first
INSERT_SUBREG uses an implicitly defined register.
Fix it in LiveVariableAnalysis by adding the <undef> flag.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106333 91177308-0d34-0410-b5e6-96231b3b80d8
basic tests.
This has been well tested on Darwin but not elsewhere.
It should work provided the linker correctly resolves
B.W <label in other function>
which it has not seen before, at least from llvm-based
compilers. I'm leaving the arm-tail-calls switch in
until I see if there's any problems because of that;
it might need to be disabled for some environments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106299 91177308-0d34-0410-b5e6-96231b3b80d8
does for {flags}. If we create virtual registers of the CCR class, RegAllocFast
may try to spill them, and we can't do that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106289 91177308-0d34-0410-b5e6-96231b3b80d8
LiveVariableAnalysis was a bit picky about a register only being redefined once,
but that really isn't necessary.
Here is an example of chained INSERT_SUBREGs that we can handle now:
68 %reg1040<def> = INSERT_SUBREG %reg1040, %reg1028<kill>, 14
register: %reg1040 +[70,134:0)
76 %reg1040<def> = INSERT_SUBREG %reg1040, %reg1029<kill>, 13
register: %reg1040 replace range with [70,78:1) RESULT: %reg1040,0.000000e+00 = [70,78:1)[78,134:0) 0@78-(134) 1@70-(78)
84 %reg1040<def> = INSERT_SUBREG %reg1040, %reg1030<kill>, 12
register: %reg1040 replace range with [78,86:2) RESULT: %reg1040,0.000000e+00 = [70,78:1)[78,86:2)[86,134:0) 0@86-(134) 1@70-(78) 2@78-(86)
92 %reg1040<def> = INSERT_SUBREG %reg1040, %reg1031<kill>, 11
register: %reg1040 replace range with [86,94:3) RESULT: %reg1040,0.000000e+00 = [70,78:1)[78,86:2)[86,94:3)[94,134:0) 0@94-(134) 1@70-(78) 2@78-(86) 3@86-(94)
rdar://problem/8096390
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106152 91177308-0d34-0410-b5e6-96231b3b80d8
The memcmp will be optimized further and even the pathological case
'strstr(x, "x") == x' generates optimal code now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106097 91177308-0d34-0410-b5e6-96231b3b80d8
will conflict with another live range. The place which creates this scenerio is
the code in X86 that lowers a select instruction by splitting the MBBs. This
eliminates the need to check from the bottom up in an MBB for live pregs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106066 91177308-0d34-0410-b5e6-96231b3b80d8
Early clobbers defining a virtual register were first alocated to a physreg and
then processed as a physreg EC, spilling the virtreg.
This fixes PR7382.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105998 91177308-0d34-0410-b5e6-96231b3b80d8
Given a copy instruction, CoalescerPair can determine which registers to
coalesce in order to eliminate the copy. It deals with all the subreg fun to
determine a tuple (DstReg, SrcReg, SubIdx) such that:
- SrcReg is a virtual register that will disappear after coalescing.
- DstReg is a virtual or physical register whose live range will be extended.
- SubIdx is 0 when DstReg is a physical register.
- SrcReg can be joined with DstReg:SubIdx.
CoalescerPair::isCoalescable() determines if another copy instruction is
compatible with the same tuple. This fixes some NEON miscompilations where
shuffles are getting coalesced as if they were copies.
The CoalescerPair class will replace a lot of the spaghetti logic in JoinCopy
later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105997 91177308-0d34-0410-b5e6-96231b3b80d8
replacing the overly conservative checks that I had introduced recently to
deal with correctness issues. This makes a pretty noticable difference
in our testcases where reg_sequences are used. I've updated one test to
check that we no longer emit the unnecessary subreg moves.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105991 91177308-0d34-0410-b5e6-96231b3b80d8
symbols as declarations in the X86 backend. This would manifest
on darwin x86-32 as errors like this with -fvisibility=hidden:
symbol '__ZNSbIcED1Ev' can not be undefined in a subtraction expression
This fixes PR7353.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105954 91177308-0d34-0410-b5e6-96231b3b80d8
i64 and f64 types, but now it also handle Neon vector types, so the f64 result
of VMOVDRR may need to be converted to a Neon type. Radar 8084742.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105845 91177308-0d34-0410-b5e6-96231b3b80d8
This is a bit of a hack to make inline asm look more like call instructions.
It would be better to produce correct dead flags during isel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105749 91177308-0d34-0410-b5e6-96231b3b80d8
the llvm tests :-(
It was failing with
-- Testing: 5324 tests, 8 threads --
Fatal Python error: PyEval_AcquireThread: NULL new thread state
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105610 91177308-0d34-0410-b5e6-96231b3b80d8
scrounging through SCEVUnknown contents and SCEVNAryExpr operands;
instead just do a simple deterministic comparison of the precomputed
hash data.
Also, since this is more precise, it eliminates the need for the slow
N^2 duplicate detection code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105540 91177308-0d34-0410-b5e6-96231b3b80d8
In file included from X86InstrInfo.cpp:16:
X86GenInstrInfo.inc:2789: error: integer constant is too large for 'long' type
X86GenInstrInfo.inc:2790: error: integer constant is too large for 'long' type
X86GenInstrInfo.inc:2792: error: integer constant is too large for 'long' type
X86GenInstrInfo.inc:2793: error: integer constant is too large for 'long' type
X86GenInstrInfo.inc:2808: error: integer constant is too large for 'long' type
X86GenInstrInfo.inc:2809: error: integer constant is too large for 'long' type
X86GenInstrInfo.inc:2816: error: integer constant is too large for 'long' type
X86GenInstrInfo.inc:2817: error: integer constant is too large for 'long' type
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105524 91177308-0d34-0410-b5e6-96231b3b80d8
there could be multiple subexpressions within a single expansion which
require insert point adjustment. This fixes PR7306.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105510 91177308-0d34-0410-b5e6-96231b3b80d8
replace an OpA with a widened OpB, it is possible to get new uses of OpA due to CSE
when recursively updating nodes. Since OpA has been processed, the new uses are
not examined again. The patch checks if this occurred and it it did, updates the
new uses of OpA to use OpB.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105453 91177308-0d34-0410-b5e6-96231b3b80d8
registers it defines then interfere with an existing preg live range.
For instance, if we had something like these machine instructions:
BB#0
... = imul ... EFLAGS<imp-def,dead>
test ..., EFLAGS<imp-def>
jcc BB#2 EFLAGS<imp-use>
BB#1
... ; fallthrough to BB#2
BB#2
... ; No code that defines EFLAGS
jcc ... EFLAGS<imp-use>
Machine sink will come along, see that imul implicitly defines EFLAGS, but
because it's "dead", it assumes that it can move imul into BB#2. But when it
does, imul's "dead" imp-def of EFLAGS is raised from the dead (a zombie) and
messes up the condition code for the jump (and pretty much anything else which
relies upon it being correct).
The solution is to know which pregs are live going into a basic block. However,
that information isn't calculated at this point. Nor does the LiveVariables pass
take into account non-allocatable physical registers. In lieu of this, we do a
*very* conservative pass through the basic block to determine if a preg is live
coming out of it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105387 91177308-0d34-0410-b5e6-96231b3b80d8
expansion is the same as that used by LegalizeDAG.
The resulting code sucks in terms of performance/codesize on x86-32 for a
64-bit operation; I haven't looked into whether different expansions might be
better in general.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105378 91177308-0d34-0410-b5e6-96231b3b80d8
iSel not properly lowring argument into a well formed DBG_VALUE in some cases is a separate issue and not related to the test in this testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105295 91177308-0d34-0410-b5e6-96231b3b80d8
the newly created allocas may be used by inlined calls, so these
need to have their tail call flags cleared. Fixes PR7272.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105255 91177308-0d34-0410-b5e6-96231b3b80d8
that are too large. This causes the freebsd bootloader to be too
large apparently.
It's unclear if this should be an -Os or -Oz thing. Thoughts welcome.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105228 91177308-0d34-0410-b5e6-96231b3b80d8
optimization level.
This only really affects llc for now because both the llvm-gcc and clang front
ends override the default register allocator. I intend to remove that code later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104904 91177308-0d34-0410-b5e6-96231b3b80d8
The goal is to match following 3 lines. In otherwords, a temp. label between to DEBUG_VALUE comments.
;DEBUG_VALUE: bar:x <- undef ## 2010-01-18-Inlined-Debug.c:7
Ltmp1:
;DEBUG_VALUE: foo:__x <- undef ## 2010-01-18-Inlined-Debug.c:5
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104872 91177308-0d34-0410-b5e6-96231b3b80d8
are st(0). These can be encoded using an opcode for storing in st(0) or using
an opcode for storing in st(i), where i can also be 0. To allow testing with
the darwin assembler and get a matching binary the opcode for storing in st(0)
is now used. To do this the same logical trick is use from the darwin assembler
in converting things like this:
fmul %st(0), %st
into this:
fmul %st(0)
by looking for the second operand being X86::ST0 for specific floating point
mnemonics then removing the second X86::ST0 operand. This also has the add
benefit to allow things like:
fmul %st(1), %st
that llvm-mc did not assemble.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104634 91177308-0d34-0410-b5e6-96231b3b80d8
Mon Ping provided; unfortunately bugpoint failed to
reduce it, but I think it's important to have a test for
this in the suite. 8023512.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104624 91177308-0d34-0410-b5e6-96231b3b80d8