Added support for address spaces and added a isVolatile field to memcpy, memmove, and memset,
e.g., llvm.memcpy.i32(i8*, i8*, i32, i32) -> llvm.memcpy.p0i8.p0i8.i32(i8*, i8*, i32, i32, i1)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100191 91177308-0d34-0410-b5e6-96231b3b80d8
- Do not try to infer GV alignment unless its type is sized. It's not possible to infer alignment if it has opaque type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100118 91177308-0d34-0410-b5e6-96231b3b80d8
1. Makes it possible to lower with floating point loads and stores.
2. Avoid unaligned loads / stores unless it's fast.
3. Fix some memcpy lowering logic bug related to when to optimize a
load from constant string into a constant.
4. Adjust x86 memcpy lowering threshold to make it more sane.
5. Fix x86 target hook so it uses vector and floating point memory
ops more effectively.
rdar://7774704
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100090 91177308-0d34-0410-b5e6-96231b3b80d8
instructions. In addition to being a convenience,
they are faster than the old apis, particularly when
not going from an MDKindID like people should be
doing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99982 91177308-0d34-0410-b5e6-96231b3b80d8
e.g., llvm.memcpy.i32(i8*, i8*, i32, i32) -> llvm.memcpy.p0i8.p0i8.i32(i8*, i8*, i32, i32, i1)
A update of langref will occur in a subsequent checkin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99928 91177308-0d34-0410-b5e6-96231b3b80d8
and those derived from them. These are obnoxious because
they were written as: PatLeaf<(bitconvert). Not having an
argument was foiling adding better type checking for operand
count matching up with what was required (in this case,
bitconvert always requires an operand!)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99759 91177308-0d34-0410-b5e6-96231b3b80d8
1, 1 cases which are by-far the most frequent. This shrinks the X86
isel table from 77014 -> 74657 bytes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99740 91177308-0d34-0410-b5e6-96231b3b80d8
the custom insertion hook deletes the instruction, then we try to set dead
flags on it. Neither the code that I added nor the code that was there
before was safe.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99538 91177308-0d34-0410-b5e6-96231b3b80d8
bytes instead of one byte. This is important because
we're running up to too many opcodes to fit in a byte
and it is aggrevated by FIRST_TARGET_MEMORY_OPCODE
making the numbering sparse. This just bites the
bullet and bloats out the table. In practice, this
increases the size of the x86 isel table from 74.5K
to 76K. I think we'll cope :)
This fixes rdar://7791648
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99494 91177308-0d34-0410-b5e6-96231b3b80d8
happening.
Enhance scheduling to set the DEAD flag on implicit defs
more aggressively. Before, we'd set an implicit def operand
to dead if it were present in the SDNode corresponding to
the machineinstr but had no use. Now we do it in this case
AND if the implicit def does not exist in the SDNode at all.
This exposes a couple of problems: one is the FIXME, which
causes a live intervals crash on CodeGen/X86/sibcall.ll.
The second is that it makes machinecse and licm more
aggressive (which is a good thing) but also exposes a case
where licm hoists a set0 and then it doesn't get resunk.
Talking to codegen folks about both these issues, but I need
this patch in in the meantime.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99485 91177308-0d34-0410-b5e6-96231b3b80d8
Here is a theoretical example that illustrates why the placement is important.
tmp1 =
store tmp1 -> x
...
tmp2 = add ...
...
call
...
store tmp2 -> x
Now mem2reg comes along:
tmp1 =
dbg_value (tmp1 -> x)
...
tmp2 = add ...
...
call
...
dbg_value (tmp2 -> x)
When the debugger examine the value of x after the add instruction but before the call, it should have the value of tmp1.
Furthermore, for dbg_value's that reference constants, they should not be emitted at the beginning of the block (since they do not have "producers").
This patch also cleans up how SDISel manages DbgValue nodes. It allow a SDNode to be referenced by multiple SDDbgValue nodes. When a SDNode is deleted, it uses the information to find the SDDbgValues and invalidate them. They are not deleted until the corresponding SelectionDAG is destroyed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99469 91177308-0d34-0410-b5e6-96231b3b80d8
2006-07-19-stwbrx-crash.ll for me, but it's the only likely
patch in the blame list of several bots. Lets see if this
fixes it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99453 91177308-0d34-0410-b5e6-96231b3b80d8
always create a new jump table. The intention was to avoid merging jump
tables in SelectionDAGBuilder, and to wait for the branch folding pass to
merge tables. Unfortunately, the same getJumpTableIndex() method is also
used to merge tables in branch folding, so as a result of this change
branch tables are never merged. Worse, the branch folding code is expecting
getJumpTableIndex to always return the index of an existing table, but with
this change, it never does so. In at least some cases, e.g., pr6543, this
creates references to non-existent tables.
I've fixed the problem by adding a new createJumpTableIndex function, which
will always create a new table, and I've changed getJumpTableIndex to only
look at existing tables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98845 91177308-0d34-0410-b5e6-96231b3b80d8
label instead of trying to form one based on the BB name (which
causes collisions if the name is empty). This fixes PR6608
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98495 91177308-0d34-0410-b5e6-96231b3b80d8
an MCSymbol. Make the EH_LABEL MachineInstr hold its label
with an MCSymbol instead of ID. Fix a bug in MMI.cpp which
would return labels named "Label4" instead of "label4".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98463 91177308-0d34-0410-b5e6-96231b3b80d8
instead of label ID's. This cleans up and regularizes a bunch
of code and makes way for future progress.
Unfortunately, this pointed out to me that JITDwarfEmitter.cpp
is largely copy and paste from DwarfException/MachineModuleInfo
and other places. This is very sad and disturbing. :(
One major change here is that TidyLandingPads moved from being
called in DwarfException::BeginFunction to being called in
DwarfException::EndFunction. There should not be any
functionality change from doing this, but I'm not an EH expert.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98459 91177308-0d34-0410-b5e6-96231b3b80d8
ppc calls copysignl with a 128 bit ppc long double, resulting
in a node that the type legalizer doesn't know how to expand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98357 91177308-0d34-0410-b5e6-96231b3b80d8
(it seems that FreeBSD doesn't have copysignl). Done by
removing a bunch of assumptions from the code. This may also
help with sparc 128 bit floats.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98346 91177308-0d34-0410-b5e6-96231b3b80d8
node which has a flag. That flag in turn was used by an
already-selected adde which turned into an ADC32ri8 which
used a selected load which was chained to the load we
folded. This flag use caused us to form a cycle. Fix
this by not ignoring chains in IsLegalToFold even in
cases where the isel thinks it can.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97791 91177308-0d34-0410-b5e6-96231b3b80d8
rounding correctly. This implementation is a generalization of
the x86_64 code in compiler-rt.
This fixes rdar://7683708.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97778 91177308-0d34-0410-b5e6-96231b3b80d8
as the very last thing before node emission. This should
dramatically reduce the number of times we do 'MatchAddress'
on X86, speeding up compile time. This also improves comments
in the tables and shrinks the table a bit, now down to
80506 bytes for x86.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97703 91177308-0d34-0410-b5e6-96231b3b80d8
CSE and recursive RAUW calls delete a node from the use list,
invalidating the use list iterator. There's currently no known
way to reproduce this in an unmodified LLVM, however there's no
fundamental reason why a SelectionDAG couldn't be formed which
would trigger this case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97665 91177308-0d34-0410-b5e6-96231b3b80d8
entry we're about to process is obviously going to fail, don't
bother pushing a scope only to have it immediately be popped.
This avoids a lot of scope stack traffic in common cases.
Unfortunately, this requires duplicating some of the predicate
dispatch. To avoid duplicating the actual logic I pulled each
predicate out to its own static function which gets used in
both places.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97651 91177308-0d34-0410-b5e6-96231b3b80d8
SwitchOpcodeMatcher) and have DAGISelMatcherOpt form it. This
speeds up selection, particularly for X86 which has lots of
variants of instructions with only type differences.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97645 91177308-0d34-0410-b5e6-96231b3b80d8
long test(long x) { return (x & 123124) | 3; }
Currently compiles to:
_test:
orl $3, %edi
movq %rdi, %rax
andq $123127, %rax
ret
This is because instruction and DAG combiners canonicalize
(or (and x, C), D) -> (and (or, D), (C | D))
However, this is only profitable if (C & D) != 0. It gets in the way of the
3-addressification because the input bits are known to be zero.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97616 91177308-0d34-0410-b5e6-96231b3b80d8
CopyToReg/CopyFromReg/INLINEASM. These are annoying because
they have the same opcode before an after isel. Fix this by
setting their NodeID to -1 to indicate that they are selected,
just like what automatically happens when selecting things that
end up being machine nodes.
With that done, give IsLegalToFold a new flag that causes it to
ignore chains. This lets the HandleMergeInputChains routine be
the one place that validates chains after a match is successful,
enabling the new hotness in chain processing. This smarter
chain processing eliminates the need for "PreprocessRMW" in the
X86 and MSP430 backends and enables MSP to start matching it's
multiple mem operand instructions more aggressively.
I currently #if out the dead code in the X86 backend and MSP
backend, I'll remove it for real in a follow-on patch.
The testcase changes are:
test/CodeGen/X86/sse3.ll: we generate better code
test/CodeGen/X86/store_op_load_fold2.ll: PreprocessRMW was
miscompiling this before, we now generate correct code
Convert it to filecheck while I'm at it.
test/CodeGen/MSP430/Inst16mm.ll: Add a testcase for mem/mem
folding to make anton happy. :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97596 91177308-0d34-0410-b5e6-96231b3b80d8
was that we weren't properly handling the case when interior
nodes of a matched pattern become dead after updating chain
and flag uses. Now we handle this explicitly in
UpdateChainsAndFlags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97561 91177308-0d34-0410-b5e6-96231b3b80d8
DoInstructionSelection. Inline "SelectRoot" into it from DAGISelHeader.
Sink some other stuff out of DAGISelHeader into SDISel.
Eliminate the various 'Indent' stuff from various targets, which dates
to when isel was recursive.
17 files changed, 114 insertions(+), 430 deletions(-)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97555 91177308-0d34-0410-b5e6-96231b3b80d8
stuff now that we don't care about emulating the old broken
behavior of the old isel. This eliminates the
'CheckChainCompatible' check (along with IsChainCompatible) which
did an incorrect and inefficient scan *up* the chain nodes which
happened as the pattern was being formed and does the validation
at the end in HandleMergeInputChains when it forms a structural
pattern. This scans "down" the graph, which means that it is
quickly bounded by nodes already selected. This also handles
token factors that get "trapped" in the dag.
Removing the CheckChainCompatible nodes also shrinks the
generated tables by about 6K for X86 (down to 83K).
There are two pieces remaining before I can nuke PreprocessRMW:
1. I xfailed a test because we're now producing worse code in a
case that has nothing to do with the change: it turns out that
our use of MorphNodeTo will leave dead nodes in the graph
which (depending on how the graph is walked) end up causing
bogus uses of chains and blocking matches. This is really
bad for other reasons, so I'll fix this in a follow-up patch.
2. CheckFoldableChainNode needs to be improved to handle the TF.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97539 91177308-0d34-0410-b5e6-96231b3b80d8
ComplexPattern at the root be generated multiple times, once
for each opcode they are part of. This encourages factoring
because the opcode checks get treated just like everything
else in the matcher.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97439 91177308-0d34-0410-b5e6-96231b3b80d8
to a scope where every child starts with a CheckOpcode, but
executes more efficiently. Enhance DAGISelMatcherOpt to
form it.
This also fixes a bug in CheckOpcode: apparently the SDNodeInfo
objects are not pointer comparable, we have to compare the
enum name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97438 91177308-0d34-0410-b5e6-96231b3b80d8
(which gets #included into the middle of each
target's DAGISel class) into a .cpp file where it is
only compiled once.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97425 91177308-0d34-0410-b5e6-96231b3b80d8
terms of store and load, which means bitcasting between scalar
integer and vector has endian-specific results, which undermines
this whole approach.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97137 91177308-0d34-0410-b5e6-96231b3b80d8
the number of value bits, not the number of bits of allocation for in-memory
storage.
Make getTypeStoreSize and getTypeAllocSize work consistently for arrays and
vectors.
Fix several places in CodeGen which compute offsets into in-memory vectors
to use TargetData information.
This fixes PR1784.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97064 91177308-0d34-0410-b5e6-96231b3b80d8
necessary to swap the operands to handle NaN and negative zero properly.
Also, reintroduce logic for checking for NaN conditions when forming
SSE min and max instructions, fixed to take into consideration NaNs and
negative zeros. This allows forming min and max instructions in more
cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97025 91177308-0d34-0410-b5e6-96231b3b80d8
to adding them in a determinstic order (bottom up from
the root) based on the structure of the graph itself.
This updates tests for some random changes, interesting
bits: CodeGen/Blackfin/promote-logic.ll no longer crashes.
I have no idea why, but that's good right?
CodeGen/X86/2009-07-16-LoadFoldingBug.ll also fails, but
now compiles to have one fewer constant pool entry, making
the expected load that was being folded disappear. Since it
is an unreduced mass of gnast, I just removed it.
This fixes PR6370
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97023 91177308-0d34-0410-b5e6-96231b3b80d8
no id's would cause early exit allowing IsLegalToFold to return true
instead of false, producing a cyclic dag.
This was striking the new isel because it isn't using SelectNodeTo yet,
which theoretically is just an optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96972 91177308-0d34-0410-b5e6-96231b3b80d8
dragonegg self-host build. I reverted 96640 in order to revert
96556 (96640 goes on top of 96556), but it also looks like with
both of them applied the breakage happens even earlier. The
symptom of the 96556 miscompile is the following crash:
llvm[3]: Compiling AlphaISelLowering.cpp for Release build
cc1plus: /home/duncan/tmp/tmp/llvm/lib/CodeGen/SelectionDAG/SelectionDAG.cpp:4982: void llvm::SelectionDAG::ReplaceAllUsesWith(llvm::SDNode*, llvm::SDNode*, llvm::SelectionDAG::DAGUpdateListener*): Assertion `(!From->hasAnyUseOfValue(i) || From->getValueType(i) == To->getValueType(i)) && "Cannot use this version of ReplaceAllUsesWith!"' failed.
Stack dump:
0. Running pass 'X86 DAG->DAG Instruction Selection' on function '@_ZN4llvm19AlphaTargetLowering14LowerOperationENS_7SDValueERNS_12SelectionDAGE'
g++: Internal error: Aborted (program cc1plus)
This occurs when building LLVM using LLVM built by LLVM (via
dragonegg). Probably LLVM has miscompiled itself, though it
may have miscompiled GCC and/or dragonegg itself: at this point
of the self-host build, all of GCC, LLVM and dragonegg were built
using LLVM. Unfortunately this kind of thing is extremely hard
to debug, and while I did rummage around a bit I didn't find any
smoking guns, aka obviously miscompiled code.
Found by bisection.
r96556 | evancheng | 2010-02-18 03:13:50 +0100 (Thu, 18 Feb 2010) | 5 lines
Some dag combiner goodness:
Transform br (xor (x, y)) -> br (x != y)
Transform br (xor (xor (x,y), 1)) -> br (x == y)
Also normalize (and (X, 1) == / != 1 -> (and (X, 1)) != / == 0 to match to "test on x86" and "tst on arm"
r96640 | evancheng | 2010-02-19 01:34:39 +0100 (Fri, 19 Feb 2010) | 16 lines
Transform (xor (setcc), (setcc)) == / != 1 to
(xor (setcc), (setcc)) != / == 1.
e.g. On x86_64
%0 = icmp eq i32 %x, 0
%1 = icmp eq i32 %y, 0
%2 = xor i1 %1, %0
br i1 %2, label %bb, label %return
=>
testl %edi, %edi
sete %al
testl %esi, %esi
sete %cl
cmpb %al, %cl
je LBB1_2
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96672 91177308-0d34-0410-b5e6-96231b3b80d8
and T->isPointerTy(). Convert most instances of the first form to the second form.
Requested by Chris.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96344 91177308-0d34-0410-b5e6-96231b3b80d8
IsLegalToFold and IsProfitableToFold. The generic version of the later simply checks whether the folding candidate has a single use.
This allows the target isel routines more flexibility in deciding whether folding makes sense. The specific case we are interested in is folding constant pool loads with multiple uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96255 91177308-0d34-0410-b5e6-96231b3b80d8
This makes early tail duplication run 60 times faster when compiling the Firefox
JavaScript interpreter, see PR6186.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95831 91177308-0d34-0410-b5e6-96231b3b80d8
lowering and requires that certain types exist in ValueTypes.h. Modified widening to
check if an op can trap and if so, the widening algorithm will apply only the op on
the defined elements. It is safer to do this in widening because the optimizer can't
guarantee removing unused ops in some cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95823 91177308-0d34-0410-b5e6-96231b3b80d8
