expand to multiple basic blocks, in which case fast-isel
needs to informed of which block to use as it resumes
inserting instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57040 91177308-0d34-0410-b5e6-96231b3b80d8
this handling to work properly for modifying stub functions, relocations
back to entry points after JIT compilation, etc..
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57013 91177308-0d34-0410-b5e6-96231b3b80d8
can be used when deciding if a block can transfer control to another
via a fall-through instead of a branch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56968 91177308-0d34-0410-b5e6-96231b3b80d8
Plugins can be now compiled in with a slight Makefile change.
For example, to compile the new Clang driver, use:
cd $LLVMC2_DIR
make TOOLNAME=ccc2 BUILTIN_PLUGINS=Clang
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56967 91177308-0d34-0410-b5e6-96231b3b80d8
a constant vector ("{0x123, 0x456}" syntax). The fix is to simplify the
_mm_srli_si128 macro, and move the "* 8" from the macro into the compiler
back-end. I can't change the existing __builtins because so many people are
using them :-(."
Patch by Stuart Hastings!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56944 91177308-0d34-0410-b5e6-96231b3b80d8
pointer bitcasts and GEP's", and centralize the
logic in Value::getUnderlyingObject. The
difference with stripPointerCasts is that
stripPointerCasts only strips GEPs if all
indices are zero, while getUnderlyingObject
strips GEPs no matter what the indices are.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56922 91177308-0d34-0410-b5e6-96231b3b80d8
`-fno-builtin' flag. Currently, it's used to replace "memset" with "_bzero"
instead of "__bzero" on Darwin10+. This arguably violates the meaning of this
flag, but is currently sufficient. The meaning of this flag should become more
specific over time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56885 91177308-0d34-0410-b5e6-96231b3b80d8
Completely eliminate the TopOrder std::vector. Instead, sort
the AllNodes list in place. This also eliminates the need to
call AllNodes.size(), a linear-time operation, before
performing the sort.
Also, eliminate the Sources temporary std::vector, since it
essentially duplicates the sorted result as it is being
built.
This also changes the direction of the topological sort
from bottom-up to top-down. The AllNodes list starts out in
roughly top-down order, so this reduces the amount of
reordering needed. Top-down is also more convenient for
Legalize, and ISel needed only minor adjustments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56867 91177308-0d34-0410-b5e6-96231b3b80d8
- I'm open to the idea that these could have better names. I think
these read better than CreateEQNull and CreateNENull.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56757 91177308-0d34-0410-b5e6-96231b3b80d8
- return attributes - inreg, zext and sext
- parameter attributes
- function attributes - nounwind, readonly, readnone, noreturn
Return attributes use 0 as the index.
Function attributes use ~0U as the index.
This patch requires corresponding changes in llvm-gcc and clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56704 91177308-0d34-0410-b5e6-96231b3b80d8
its size). Adjust various lowering functions to
pass this info through from CallInst. Use it to
implement sseregparm returns on X86. Remove
X86_ssecall calling convention.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56677 91177308-0d34-0410-b5e6-96231b3b80d8
information is in an unreachable block, then it's possible that the high/low pc
values won't be set for the dwarf information. E.g., this function:
void abort(void) __attribute__((__noreturn__));
void dead_beef(void) __attribute__ ((noreturn));
int *b;
void dead_beef(void) {
*b=0xdeadbeef;
abort();
}
has a call to "@llvm.dbg.region.end" only in the unreachable block:
define void @dead_beef() noreturn nounwind {
entry:
call void @llvm.dbg.func.start(...)
call void @llvm.dbg.stoppoint(...)
...
call void @abort( ) noreturn nounwind
unreachable
return: ; No predecessors!
call void @llvm.dbg.stoppoint(...)
call void @llvm.dbg.region.end(...)
ret void
}
The dwarf information emitted is something like:
0x00000084: TAG_subprogram [5]
AT_name( "dead_beef" )
AT_external( 0x01 )
AT_prototyped( 0x01 )
AT_decl_file( 0x01 )
AT_decl_line( 0x08 )
Note that this is *not* the best fix for this problem, but a band-aid for an
gaping wound. This code needs to be changed when we revamp our debugging
information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56628 91177308-0d34-0410-b5e6-96231b3b80d8
s/ParamAttr/Attribute/g
s/PAList/AttrList/g
s/FnAttributeWithIndex/AttributeWithIndex/g
s/FnAttr/Attribute/g
This sets the stage
- to implement function notes as function attributes and
- to distinguish between function attributes and return value attributes.
This requires corresponding changes in llvm-gcc and clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56622 91177308-0d34-0410-b5e6-96231b3b80d8
meaning sse_regparm (i.e. float/double values go
in XMM0 instead of ST0). Update documentation
to reflect reality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56619 91177308-0d34-0410-b5e6-96231b3b80d8
a separate function, eliminating duplication between the
add-passes-for-file and add-passes-for-machine-code code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56599 91177308-0d34-0410-b5e6-96231b3b80d8
the SelectionDAG and DAGCombiner code. The only functionality change is that now
the DAG combiner is performing the constant folding for these operations instead
of being a no-op.
This is *not* in response to a bug, so there isn't a testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56550 91177308-0d34-0410-b5e6-96231b3b80d8
RA problem by expanding the live interval of an
earlyclobber def back one slot. Remove
overlap-earlyclobber throughout. Remove
earlyclobber bits and their handling from
live internals.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56539 91177308-0d34-0410-b5e6-96231b3b80d8
Handle{Virt,Phys}Reg{Def,Use}. Remove a redundant check
for register zero, and redundant checks for isPhysicalRegister.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56412 91177308-0d34-0410-b5e6-96231b3b80d8
use ARG_FLAGSSDNode as the most aligned node type,
as it contains an int64_t, which is 8-byte
aligned on mingw.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56358 91177308-0d34-0410-b5e6-96231b3b80d8
Unfortunately this means removing one regression test
of GlobalsModRef because I couldn't work out how to
perform it without MarkModRef.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56342 91177308-0d34-0410-b5e6-96231b3b80d8
can get the readnone/readonly attributes, and gives them it.
The plan is to remove markmodref (which did the same thing
by querying GlobalsModRef) and delete the analogous
functionality from GlobalsModRef.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56341 91177308-0d34-0410-b5e6-96231b3b80d8
copy of the BURRList scheduler, but with several parts ripped
out, such as backtracking, online topological sort maintenance
(needed by backtracking), the priority queue, and Sethi-Ullman
number computation and maintenance (needed by the priority
queue). As a result of all this, it generates somewhat lower
quality code, but that's its tradeoff for running about 30%
faster than list-burr in -fast mode in many cases.
This is somewhat experimental. Moving forward, major pieces of
this can be refactored with pieces in common with
ScheduleDAGRRList.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56307 91177308-0d34-0410-b5e6-96231b3b80d8
with an earlyclobber operand elsewhere. Propagate
this bit and the earlyclobber bit through SDISel.
Change linear-scan RA not to allocate regs in a way
that conflicts with an earlyclobber. See also comments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56290 91177308-0d34-0410-b5e6-96231b3b80d8
- Add linkage to SymbolSDNode (default to external).
- Change ISD::ExternalSymbol to ISD::Symbol.
- Change ISD::TargetExternalSymbol to ISD::TargetSymbol
These changes pave the way to allowing SymbolSDNodes with non-external linkage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56249 91177308-0d34-0410-b5e6-96231b3b80d8
bitcode reader/writer as follows:
- add and use new bitcode FUNC_CODE_INST_VSELECT to handle the llvm
select opcode using either i1 or [N x i1] as the selector.
- retain old BITCODE FUNC_CODE_INST_SELECT in the bitcode reader to
handle select on i1 for backwards compatibility with existing bitcode
files.
- re-enable the vector-select.ll test program.
Also, rename the recently added bitcode opcode FUNC_CODE_INST_VCMP to
FUNC_CODE_INST_CMP2 and make the bitcode writer use it to handle
fcmp/icmp on scalars or vectors. In the bitcode writer, use
FUNC_CODE_INST_CMP for vfcmp/vicmp only. In the bitcode reader, have
FUNC_CODE_INST_CMP handle icmp/fcmp returning bool, for backwards
compatibility with existing bitcode files.
Patch by Preston Gurd!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56233 91177308-0d34-0410-b5e6-96231b3b80d8
isImmediate(), isRegister(), and friends, to avoid confusion
about having two different names with the same meaning. I'm
not attached to the longer names, and would be ok with
changing to the shorter names if others prefer it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56189 91177308-0d34-0410-b5e6-96231b3b80d8
Currently it just holds the calling convention and flags
for isVarArgs and isTailCall.
And it has several utility methods, which eliminate magic
5+2*i and similar index computations in several places.
CallSDNodes are not CSE'd. Teach UpdateNodeOperands to handle
nodes that are not CSE'd gracefully.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56183 91177308-0d34-0410-b5e6-96231b3b80d8
ConstantFP* instead of APInt and APFloat directly.
This reduces the amount of time to create ConstantSDNode
and ConstantFPSDNode nodes when ConstantInt* and ConstantFP*
respectively are already available, as is the case in
SelectionDAGBuild.cpp. Also, it reduces the amount of time
to legalize constants into constant pools, and the amount of
time to add ConstantFP operands to MachineInstrs, due to
eliminating ConstantInt::get and ConstantFP::get calls.
It increases the amount of work needed to create new constants
in cases where the client doesn't already have a ConstantInt*
or ConstantFP*, such as legalize expanding 64-bit integer constants
to 32-bit constants. And it adds a layer of indirection for the
accessor methods. But these appear to be outweight by the benefits
in most cases.
It will also make it easier to make ConstantSDNode and
ConstantFPNode more consistent with ConstantInt and ConstantFP.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56162 91177308-0d34-0410-b5e6-96231b3b80d8
with ConstantInt. This led to fixing a bug in TargetLowering.cpp
using getValue instead of getAPIntValue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56159 91177308-0d34-0410-b5e6-96231b3b80d8
cmp-and-swap reversed the Cmp and Swap arguments; comments
make it clear this is unintentional. Unfortunately, the
x86 BE had a compensating reversal, which is removed here.
PPC is OK.
From inspection of the Alpha code I think it is OK, but
if somebody has that platform please check it out. I
cannot test on that platform.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56091 91177308-0d34-0410-b5e6-96231b3b80d8
UsedDirective for some symbols in llvm.used into
Darwin-specific code. I've decided LessPrivateGlobal
is potentially a useful abstraction and left it in
the target-independent area, with improved comment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56024 91177308-0d34-0410-b5e6-96231b3b80d8
objects in llvm.used (thanks Anton). Makes visible
the magic 'l' prefix for symbols on Darwin which are
to be passed through the assembler, then removed at
linktime (previously all references to this had been
hidden in the ObjC FE code, oh well).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55973 91177308-0d34-0410-b5e6-96231b3b80d8
and, if so, to return a vector of boolean as a result;
Extend the select LLVM IR instruction to allow you to specify a result
type which is a vector of boolean, in which case the result will be an
element-wise selection instead of choosing one vector or the other; and
Update LangRef.html to describe these changes.
This patch was contributed by Preston Gurd!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55969 91177308-0d34-0410-b5e6-96231b3b80d8
Now with fix, which prevents subtle codegen bug to trigger on darwin.
No fix for bug though, it's still there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55955 91177308-0d34-0410-b5e6-96231b3b80d8
- Add a AnalyzeCallResult specialized for calls which produce a single value. This is used by fastisel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55879 91177308-0d34-0410-b5e6-96231b3b80d8
call (thus changing the call site) it didn't
inform the callgraph about this. But the
call site does matter - as shown by the testcase,
the callgraph become invalid after the inliner
ran (with an edge between two functions simply
missing), resulting in wrong deductions by
GlobalsModRef.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55872 91177308-0d34-0410-b5e6-96231b3b80d8
that they read the rounding mode. This is conservatively
correct, which they weren't before. We can do more
optimization on these if we actually model the rounding
mode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55860 91177308-0d34-0410-b5e6-96231b3b80d8
because it does not maintain a correct list
of callsites. I discovered (see following
commit) that the inliner will create a wrong
callgraph if it is fed a callgraph with
correct edges but incorrect callsites. These
were created by Prune-EH, and while it wasn't
done via removeCallEdgeTo, it could have been
done via removeCallEdgeTo, which is an accident
waiting to happen. Use removeCallEdgeFor
instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55859 91177308-0d34-0410-b5e6-96231b3b80d8
HandlePHINodesInSuccessorBlocks that works FastISel-style. This
allows PHI nodes to be updated correctly while using FastISel.
This also involves some code reorganization; ValueMap and
MBBMap are now members of the FastISel class, so they needn't
be passed around explicitly anymore. Also, SelectInstructions
is changed to SelectInstruction, and only does one instruction
at a time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55746 91177308-0d34-0410-b5e6-96231b3b80d8
list that have internal linkage; the linker doesn't need
or want this. (These objects must still be preserved
at compile time, so just removing them from the llvm.used
list doesn't work.) Should affect only Darwin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55722 91177308-0d34-0410-b5e6-96231b3b80d8
and SelectionDAGLowering classes, out of SelectionDAGISel.cpp and put
it in a separate file, SelectionDAGBuild.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55701 91177308-0d34-0410-b5e6-96231b3b80d8
attributes on functions, based on the result of
alias analysis. It's not hardwired to use
GlobalsModRef even though this is the only (AFAIK)
alias analysis that results in this pass actually
doing something. Enable as follows:
opt ... -globalsmodref-aa -markmodref ...
Advantages of this pass: (1) records the result
of globalsmodref in the bitcode, meaning it is
available for use by later passes (currently
the pass manager isn't smart enough to magically
make an advanced alias analysis available to all
later passes), which may expose more optimization
opportunities; (2) hopefully speeds up compilation
when code is optimized twice, for example when a
file is compiled to bitcode, then later LTO is done
on it: marking functions readonly/readnone when
producing the initial bitcode should speed up alias
analysis during LTO; (3) good for discovering that
globalsmodref doesn't work very well :)
Not currently turned on by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55604 91177308-0d34-0410-b5e6-96231b3b80d8
assignment when selecting the def. This is the naive solution to the problem: insert a copy to the pre-chosen
vreg. Other solutions might be preferable, such as:
1) Passing the dest reg into FastEmit_. However, this would require the higher level code to know about reg classes, which they don't currently.
2) Selecting blocks in reverse postorder. This has some compile time cost for computing the order, and we'd need to measure its impact.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55555 91177308-0d34-0410-b5e6-96231b3b80d8
/// lookup - Return the entry for the specified key, or a default
/// constructed value if no such entry exists.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55523 91177308-0d34-0410-b5e6-96231b3b80d8
ATOMIC_LOAD_ADD_{8,16,32,64} instead of ATOMIC_LOAD_ADD.
Increased the Hardcoded Constant OpActionsCapacity to match.
Large but boring; no functional change.
This is to support partial-word atomics on ppc; i8 is
not a valid type there, so by the time we get to lowering, the
ATOMIC_LOAD nodes looks the same whether the type was i8 or i32.
The information can be added to the AtomicSDNode, but that is the
largest SDNode; I don't fully understand the SDNode allocation,
but it is sensitive to the largest node size, so increasing
that must be bad. This is the alternative.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55457 91177308-0d34-0410-b5e6-96231b3b80d8
works with.
SelectionDAG, FunctionLoweringInfo, and SelectionDAGLowering
objects now get created once per SelectionDAGISel instance, and
can be reused across blocks and across functions. Previously,
they were created and destroyed each time they were needed.
This reorganization simplifies the handling of PHI nodes, and
also SwitchCases, JumpTables, and BitTestBlocks. This
simplification has the side effect of fixing a bug in FastISel
where successor PHI nodes weren't being updated correctly.
This is also a step towards making the transition from FastISel
into and out of SelectionDAG faster, and also making
plain SelectionDAG faster on code with lots of little blocks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55450 91177308-0d34-0410-b5e6-96231b3b80d8
the details of materializing constants and other values into
registers, and make use of it in several places.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55426 91177308-0d34-0410-b5e6-96231b3b80d8
was inserted or not. This allows bitcast in fast isel to properly handle the case
where an appropriate reg-to-reg copy is not available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55375 91177308-0d34-0410-b5e6-96231b3b80d8
str() mirrors the same method in std::ostringstream.
str() flushes the buffered stream contents to string and returns a reference to the string.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55370 91177308-0d34-0410-b5e6-96231b3b80d8
Adding one include file and correct one declaration from class to struct in order to make llvm compile on VC2005.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55279 91177308-0d34-0410-b5e6-96231b3b80d8
use raw_ostream instead of std::ostream. Among other goodness,
this speeds up llvm-dis of kc++ with a release build from 0.85s
to 0.49s (88% faster).
Other interesting changes:
1) This makes Value::print be non-virtual.
2) AP[S]Int and ConstantRange can no longer print to ostream directly,
use raw_ostream instead.
3) This fixes a bug in raw_os_ostream where it didn't flush itself
when destroyed.
4) This adds a new SDNode::print method, instead of only allowing "dump".
A lot of APIs have both std::ostream and raw_ostream versions, it would
be useful to go through and systematically anihilate the std::ostream
versions.
This passes dejagnu, but there may be minor fallout, plz let me know if
so and I'll fix it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55263 91177308-0d34-0410-b5e6-96231b3b80d8
all the power and risk of fprintf format strings. Use them like this:
OS << format("%10.4f", 42.0) << "\n" << format("%x", 42) << '\n';
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55246 91177308-0d34-0410-b5e6-96231b3b80d8
process up to a higher level. This allows FastISel to leverage
more of SelectionDAGISel's infastructure, such as updating Machine
PHI nodes.
Also, implement transitioning from SDISel back to FastISel in
the middle of a block, so it's now possible to go back and
forth. This allows FastISel to hand individual CallInsts and other
complicated things off to SDISel to handle, while handling the rest
of the block itself.
To help support this, reorganize the SelectionDAG class so that it
is allocated once and reused throughout a function, instead of
being completely reallocated for each block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55219 91177308-0d34-0410-b5e6-96231b3b80d8
handled correctly, and change a few SmallVector uses to use
size 0 to more clearly reflect their intent.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55181 91177308-0d34-0410-b5e6-96231b3b80d8
and use it in FastISelEmitter.cpp, and make FastISel
subtarget aware. Among other things, this lets it work
properly on x86 targets that don't have SSE, where it
successfully selects x87 instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55156 91177308-0d34-0410-b5e6-96231b3b80d8
class hold a MachineRegisterInfo member, and make the
MachineBasicBlock be passed in to SelectInstructions rather
than the FastISel constructor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55076 91177308-0d34-0410-b5e6-96231b3b80d8
and the slow-path cases out of line. This speeds up instcombine
a bit in real world cases. Patch contributed by m-s.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55063 91177308-0d34-0410-b5e6-96231b3b80d8
alignment and volatility information, such as loads and
stores, to reduce the number of integer values added to
the FoldingSetNodeID.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55058 91177308-0d34-0410-b5e6-96231b3b80d8
an ostream, which is just weird.
Rename SC_DEBUG -> ST_DEBUG
Remove static indentation strangeness from WriteConstantInt. This makes it
so that large structs are not broken down and printed on multiple lines. If
there is demand for this to return, there are better ways to implement this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54981 91177308-0d34-0410-b5e6-96231b3b80d8
in so far as it compiles and, in theory, works, but does not take advantage of recent advancements. For instance, it could be improved by using
MachineRegisterInfo::use_iterator.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54924 91177308-0d34-0410-b5e6-96231b3b80d8
In particular, Collector was confusing to implementors. Several
thought that this compile-time class was the place to implement
their runtime GC heap. Of course, it doesn't even exist at runtime.
Specifically, the renames are:
Collector -> GCStrategy
CollectorMetadata -> GCFunctionInfo
CollectorModuleMetadata -> GCModuleInfo
CollectorRegistry -> GCRegistry
Function::getCollector -> getGC (setGC, hasGC, clearGC)
Several accessors and nested types have also been renamed to be
consistent. These changes should be obvious.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54899 91177308-0d34-0410-b5e6-96231b3b80d8
- update VC projects.
- Add an overload to llvm::Stream for <<, since std::hex and std::dec have type std::ios_base& (*)(std::ios_base&) in VC++. (templating the function don't work, due to ambiguities)
- add ../ on several include in X86/AsmPrinter/
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54898 91177308-0d34-0410-b5e6-96231b3b80d8
returning an std::string by value, it fills in a SmallString/SmallVector
passed in. This significantly reduces string thrashing in some cases.
More specifically, this:
- Adds an operator<< and a print method for APInt that allows you to
directly send them to an ostream.
- Reimplements APInt::toString to be much simpler and more efficient
algorithmically in addition to not thrashing strings quite as much.
This speeds up llvm-dis on kc++ by 7%, and may also slightly speed up the
asmprinter. This also fixes a bug I introduced into the asmwriter in a
previous patch w.r.t. alias printing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54873 91177308-0d34-0410-b5e6-96231b3b80d8