Pulls out some more code from some of the rather monolithic DWARF
classes. Unlike the address table, the string table won't move up into
DwarfDebug - each DWARF file has its own string table (but there can be
only one address table).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207277 91177308-0d34-0410-b5e6-96231b3b80d8
Consider this use from the new testcase:
LSR Use: Kind=ICmpZero, Offsets={0}, widest fixup type: i32
reg({1000,+,-1}<nw><%for.body>)
-3003 + reg({3,+,3}<nw><%for.body>)
-1001 + reg({1,+,1}<nuw><nsw><%for.body>)
-1000 + reg({0,+,1}<nw><%for.body>)
-3000 + reg({0,+,3}<nuw><%for.body>)
reg({-1000,+,1}<nw><%for.body>)
reg({-3000,+,3}<nsw><%for.body>)
This is the last use we consider for a solution in SolveRecurse, so CurRegs is
a large set. (CurRegs is the set of registers that are needed by the
previously visited uses in the in-progress solution.)
ReqRegs is {
{3,+,3}<nw><%for.body>,
{1,+,1}<nuw><nsw><%for.body>
}
This is the intersection of the regs used by any of the formulas for the
current use and CurRegs.
Now, the code requires a formula to contain *all* these regs (the comment is
simply wrong), otherwise the formula is immediately disqualified. Obviously,
no formula for this use contains two regs so they will all get disqualified.
The fix modifies the check to allow the formula in this case. The idea is
that neither of these formulae is introducing any new registers which is the
point of this early pruning as far as I understand.
In terms of set arithmetic, we now allow formulas whose used regs are a subset
of the required regs not just the other way around.
There are few more loops in the test-suite that are now successfully LSRed. I
have benchmarked those and found very minimal change.
Fixes <rdar://problem/13965777>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207271 91177308-0d34-0410-b5e6-96231b3b80d8
buildbot - do not insert debug intrinsics before phi nodes.
Debug info for optimized code: Support variables that are on the stack and
described by DBG_VALUEs during their lifetime.
Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.
This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine.ll testcase and included source
rdar://problem/16679879
http://reviews.llvm.org/D3374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207269 91177308-0d34-0410-b5e6-96231b3b80d8
This should reduce the chance of memory leaks like those fixed in
r207240.
There's still some unclear ownership of DIEs happening in DwarfDebug.
Pushing unique_ptr and references through more APIs should help expose
the cases where ownership is a bit fuzzy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207263 91177308-0d34-0410-b5e6-96231b3b80d8
Makes some more cases (the unit tests, specifically), lexically
compatible with a change to unique_ptr.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207261 91177308-0d34-0410-b5e6-96231b3b80d8
Since this doesn't return ownership (the DIE has been added to the
specified parent already) nor return null, just return by reference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207259 91177308-0d34-0410-b5e6-96231b3b80d8
Move a lot of the loop-related logic that was sprinkled around the code
into `LoopData`.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207258 91177308-0d34-0410-b5e6-96231b3b80d8
This'll make changing to unique_ptr ownership of DIEs easier since the
usages will now have '*' on them making them textually compatible
between unique_ptr and raw pointer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207253 91177308-0d34-0410-b5e6-96231b3b80d8
It's fishy to be changing the `std::vector<>` owned by the iterator, and
no one actual does it, so I'm going to remove the ability in a
subsequent commit. First, update the users.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207252 91177308-0d34-0410-b5e6-96231b3b80d8
This intrinsic is no longer needed with the new @llvm.arm.hint(i32) intrinsic
which provides a generic, extensible manner for adding hint instructions. This
functionality can now be represented as @llvm.arm.hint(i32 5).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207246 91177308-0d34-0410-b5e6-96231b3b80d8
override the default cold threshold.
When we use command line argument to set the inline threshold, the default
cold threshold will not be used. This is in line with how we use
OptSizeThreshold. When we want a higher threshold for all functions, we
do not have to set both inline threshold and cold threshold.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207245 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce the llvm.arm.hint(i32) intrinsic that can be used to inject hints into
the instruction stream. This is particularly useful for generating IR from a
compiler where the user may inject an intrinsic (e.g. __yield). These are then
pattern substituted into the correct instruction which already existed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207242 91177308-0d34-0410-b5e6-96231b3b80d8
Debug info: Let dbg.values inserted by LowerDbgDeclare inherit the location
of the dbg.value. This gets rid of tons of redundant variable DIEs in
subscopes.
rdar://problem/14874886, rdar://problem/16679936
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207236 91177308-0d34-0410-b5e6-96231b3b80d8
AllocaInst that was missing in one location.
Debug info for optimized code: Support variables that are on the stack and
described by DBG_VALUEs during their lifetime.
Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.
This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine.ll testcase and included source
rdar://problem/16679879
http://reviews.llvm.org/D3374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207235 91177308-0d34-0410-b5e6-96231b3b80d8
There's no need for local symbols to go through the GOT, in fact it seems GNU ld is not even emitting GOT entries for local symbols and will error out when trying to resolve a GOT relocation for a local symbol.
This bug triggers when bootstrapping clang on AArch64 Linux with -fPIC and the ARM64 backend. The AArch64 backend is not affected.
With this commit it's now possible to bootstrap clang on AArch64 Linux with the ARM64 backend (-fPIC, -O3).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207226 91177308-0d34-0410-b5e6-96231b3b80d8
SCCMap to test for nodes that have been re-added to the root SCC rather
than a set vector. We already have done the SCCMap lookup, we juts need
to test it in two different ways. In turn, do most of the processing of
these nodes as they go into the root SCC rather than lazily. This
simplifies the final loop to just stitch the root SCC into its
children's parent sets. No functionlatiy changed.
However, this makes a few things painfully obvious, which was my intent.
=] There is tons of repeated code introduced here and elsewhere. I'm
splitting the refactoring of that code into helpers from this change so
its clear that this is the change which switches the datastructures used
around, and the other is a pure factoring & deduplication of code
change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207217 91177308-0d34-0410-b5e6-96231b3b80d8
This patch is a supplement of implementing predicate of FP, enabling aarch64 backend
no-fp tests on arm64 target for verification. During this, one bug is exposed and
fixed by this patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207215 91177308-0d34-0410-b5e6-96231b3b80d8
remove the nodes in the SCC from the SCC map entirely prior to the DFS
walk. This allows the SCC map to represent both the state of
not-yet-re-added-to-an-SCC and added-back-to-this-SCC independently. The
first is being missing from the SCC map, the second is mapping back to
'this'. In a subsequent commit, I'm going to use this property to
simplify the new node list for this SCC.
In theory, I think this also makes the contract for orphaning a node
from the graph slightly less confusing. Now it is also orphaned from the
SCC graph. Still, this isn't quite right either, and so I'm not adding
test cases here. I'll add test cases for the behavior of orphaning nodes
when the code *actually* supports it. The change here is mostly
incidental, my goal is simplifying the algorithm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207213 91177308-0d34-0410-b5e6-96231b3b80d8
child from the worklist, wait until we actually need to pop another
element off of the worklist and skip over any that were already visited
by the DFS. This also enables swapping the nodes of the SCC into the
worklist. No functionality changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207212 91177308-0d34-0410-b5e6-96231b3b80d8
thing, just mucking up the code. I feel bad that I even wrote this loop.
Very sorry. The diff is huge because of the indent change, but I promise
all this is doing is realizing that the outer two loops were actually
the exact same loops, and we didn't need two of them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207202 91177308-0d34-0410-b5e6-96231b3b80d8
factored into a more reasonable form, replace the tail call with
a simple outer-loop continuation. It's sad that C++ makes this so
awkward to write, but it seems more direct and clear than the tail call
at this point.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207201 91177308-0d34-0410-b5e6-96231b3b80d8
Change the object streamer selection to a switch from a series of if conditions.
Rather than defaulting to ELF, require that an ELF format is requested. The
Windows/!ELF is maintained as MachO would have been selected first and will
still provide a MachO format. Add an assertion that if COFF is requested that
the target platform is Windows as only WinCOFF object emission is currently
supported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207200 91177308-0d34-0410-b5e6-96231b3b80d8
Remove the concepts of "forward" and "general" mass distributions, which
was wrong. The split might have made sense in an early version of the
algorithm, but it's definitely wrong now.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207195 91177308-0d34-0410-b5e6-96231b3b80d8
Rather than scaling loop headers and then scaling all the loop members
by the header frequency, scale `LoopData::Scale` itself, and scale the
loop members by it. It's much more obvious what's going on this way,
and doesn't cost any extra multiplies.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207189 91177308-0d34-0410-b5e6-96231b3b80d8
Make `getPackagedNode()` a member function of
`BlockFrequencyInfoImplBase` so that it's available for templated code.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207183 91177308-0d34-0410-b5e6-96231b3b80d8
As pointed out by David Blaikie in code review, a `std::list<T>` is
simpler than a `std::vector<std::unique_ptr<T>>`. Another option is a
`std::deque<T>` (which allocates in chunks), but I'd like to leave open
the option of inserting in the middle of the sequence for handling
irreducible control flow on the fly.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207177 91177308-0d34-0410-b5e6-96231b3b80d8
When fixing the symbols in each compressed section we were iterating
over all symbols for each compressed section. In extreme cases this
could snowball severely (5min uncompressed -> 35min compressed) due to
iterating over all symbols for each compressed section (large numbers of
compressed sections can be generated by DWARF type units).
To address this, build a map of the symbols in each section ahead of
time, and access that map if a section is being compressed. This brings
compile time for the aforementioned example down to ~6 minutes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207167 91177308-0d34-0410-b5e6-96231b3b80d8
AllocaInst that was missing in one location.
Debug info for optimized code: Support variables that are on the stack and
described by DBG_VALUEs during their lifetime.
Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.
This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine.ll testcase and included source
rdar://problem/16679879
http://reviews.llvm.org/D3374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207165 91177308-0d34-0410-b5e6-96231b3b80d8
condition into an obviously infinite loop with an assert about the
degenerate condition. No functionality changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207147 91177308-0d34-0410-b5e6-96231b3b80d8
This is similar to the 'tail' marker, except that it guarantees that
tail call optimization will occur. It also comes with convervative IR
verification rules that ensure that tail call optimization is possible.
Reviewers: nicholas
Differential Revision: http://llvm-reviews.chandlerc.com/D3240
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207143 91177308-0d34-0410-b5e6-96231b3b80d8
of the dbg.value. This gets rid of tons of redundant variable DIEs in
subscopes.
rdar://problem/14874886, rdar://problem/16679936
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207135 91177308-0d34-0410-b5e6-96231b3b80d8
rather than by adding an overload and hoping that it's declared before the code
that calls it. (In a modules build, it isn't.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207133 91177308-0d34-0410-b5e6-96231b3b80d8
described by DBG_VALUEs during their lifetime.
Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.
This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine-intrinsics testcase and included source
rdar://problem/16679879
http://reviews.llvm.org/D3374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207130 91177308-0d34-0410-b5e6-96231b3b80d8
This patch:
- Adds two new X86 builtin intrinsics ('int_x86_rdtsc' and
'int_x86_rdtscp') as GCCBuiltin intrinsics;
- Teaches the backend how to lower the two new builtins;
- Introduces a common function to lower READCYCLECOUNTER dag nodes
and the two new rdtsc/rdtscp intrinsics;
- Improves (and extends) the existing x86 test 'rdtsc.ll'; now test 'rdtsc.ll'
correctly verifies that both READCYCLECOUNTER and the two new intrinsics
work fine for both 64bit and 32bit Subtargets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207127 91177308-0d34-0410-b5e6-96231b3b80d8
I discovered this const-hole while attempting to coalesnce the Symbol
and SymbolMap data structures. There's some pending issues with that,
but I figured this change was easy to flush early.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207124 91177308-0d34-0410-b5e6-96231b3b80d8
Leak identified by LSan and reported by Kostya Serebryany.
Let's get a bit experimental here... in theory our minimum compiler
versions support unordered_map.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207118 91177308-0d34-0410-b5e6-96231b3b80d8
This matches ARM64 behaviour, which I think is clearer. It also puts all the
churn from that difference into one easily ignored commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207116 91177308-0d34-0410-b5e6-96231b3b80d8
These can have different relocations in ELF. In particular both:
b.eq global
ldr x0, global
are valid, giving different relocations. The only possible way to distinguish
them is via a different fixup, so the operands had to be separated throughout
the backend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207105 91177308-0d34-0410-b5e6-96231b3b80d8
ARM64 was not producing pure BFI instructions for bitfield insertion
operations, unlike AArch64. The approach had to be a little different (in
ISelDAGToDAG rather than ISelLowering), and the outcomes aren't identical but
hopefully this gives it similar power.
This should address PR19424.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207102 91177308-0d34-0410-b5e6-96231b3b80d8
algorithm here: http://dl.acm.org/citation.cfm?id=177301.
The idea of isolating the roots has even more relevance when using the
stack not just to implement the DFS but also to implement the recursive
step. Because we use it for the recursive step, to isolate the roots we
need to maintain two stacks: one for our recursive DFS walk, and another
of the nodes that have been walked. The nice thing is that the latter
will be half the size. It also fixes a complete hack where we scanned
backwards over the stack to find the next potential-root to continue
processing. Now that is always the top of the DFS stack.
While this is a really nice improvement already (IMO) it further opens
the door for two important simplifications:
1) De-duplicating some of the code across the two different walks. I've
actually made the duplication a bit worse in some senses with this
patch because the two are starting to converge.
2) Dramatically simplifying the loop structures of both walks.
I wanted to do those separately as they'll be essentially *just* CFG
restructuring. This patch on the other hand actually uses different
datastructures to implement the algorithm itself.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207098 91177308-0d34-0410-b5e6-96231b3b80d8
applied prior to pushing a node onto the DFSStack. This is the first
step toward avoiding the stack entirely for leaf nodes. It also
simplifies things a bit and I think is pointing the way toward factoring
some more of the shared logic out of the two implementations.
It is also making it more obvious how to restructure the loops
themselves to be a bit easier to read (although no different in terms of
functionality).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207095 91177308-0d34-0410-b5e6-96231b3b80d8
a SmallPtrSet. Currently, there is no need for stable iteration in this
dimension, and I now thing there won't need to be going forward.
If this is ever re-introduced in any form, it needs to not be
a SetVector based solution because removal cannot be linear. There will
be many SCCs with large numbers of parents. When encountering these, the
incremental SCC update for intra-SCC edge removal was quadratic due to
linear removal (kind of).
I'm really hoping we can avoid having an ordering property here at all
though...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207091 91177308-0d34-0410-b5e6-96231b3b80d8
This allows us to compile
return (mask & 0x8 ? a : b);
into
testb $8, %dil
cmovnel %edx, %esi
instead of
andl $8, %edi
shrl $3, %edi
cmovnel %edx, %esi
which we formed previously because dag combiner canonicalizes setcc of and into shift.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207088 91177308-0d34-0410-b5e6-96231b3b80d8
Added support for bytes replication feature, so it could be GAS compatible.
E.g. instructions below:
"vmov.i32 d0, 0xffffffff"
"vmvn.i32 d0, 0xabababab"
"vmov.i32 d0, 0xabababab"
"vmov.i16 d0, 0xabab"
are incorrect, but we could deal with such cases.
For first one we should emit:
"vmov.i8 d0, 0xff"
For second one ("vmvn"):
"vmov.i8 d0, 0x54"
For last two instructions it should emit:
"vmov.i8 d0, 0xab"
P.S.: In ARMAsmParser.cpp I have also fixed few nearby style issues in old code.
Just for keeping method bodies in harmony with themselves.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207080 91177308-0d34-0410-b5e6-96231b3b80d8
This excludes avx512 as I don't have hardware to verify. It excludes _dq
variants because they are represented in the IR as <{2,4} x i64> when it's
actually a byte shift of the entire i{128,265}.
This also excludes _dq_bs as they aren't at all supported by the backend.
There are also no corresponding instructions in the ISA. I have no idea why
they exist...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207058 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Since the upper 64 bits of the destination register are undefined when
performing this operation, we can substitute it and let the optimizer
figure out that only a copy is needed.
Also added range merging, if an instruction copies a range that can be
merged with a previous copied range.
Added test cases for both optimizations.
Reviewers: grosbach, nadav
CC: llvm-commits
Differential Revision: http://reviews.llvm.org/D3357
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207055 91177308-0d34-0410-b5e6-96231b3b80d8
than functions. So far, this access pattern is *much* more common. It
seems likely that any user of this interface is going to have nodes at
the point that they are querying the SCCs.
No functionality changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207045 91177308-0d34-0410-b5e6-96231b3b80d8
values rather than an expensive dense map query to test whether children
have already been popped into an SCC. This matches the incremental SCC
building code. I've also included the assert that I put there but
updated both of their text.
No functionality changed here.
I still don't have any great ideas for sharing the code between the two
implementations, but I may try a brute-force approach to factoring it at
some point.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207042 91177308-0d34-0410-b5e6-96231b3b80d8
GCOV provides an option to prepend output file names with the source
file name, to disambiguate between covered data that's included from
multiple sources. Add a flag to llvm-cov that does the same.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207035 91177308-0d34-0410-b5e6-96231b3b80d8
Emit the flag to indicate to the assembler that a section contains data if there
is pre-populated data present.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207028 91177308-0d34-0410-b5e6-96231b3b80d8
There's only ever one address pool, not one per DWARF output file, so
let's just have one.
(similar refactoring of the string pool to come soon)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207026 91177308-0d34-0410-b5e6-96231b3b80d8
ANDS does not use the same encoding scheme as other xxxS instructions (e.g.,
ADDS). Take that into account to avoid wrong peephole optimization.
<rdar://problem/16693089>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207020 91177308-0d34-0410-b5e6-96231b3b80d8
Some of these types (DwarfDebug in particular) are quite large to begin
with (and I keep forgetting whether DwarfFile is in DwarfDebug or
DwarfUnit... ) so having a few smaller files seems like goodness.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207010 91177308-0d34-0410-b5e6-96231b3b80d8
We're currently copying CounterData from InstrProfWriter into the
OnDiskHashTable, even though we don't need to, and then carelessly
leaking those copies. A const pointer is much better here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207009 91177308-0d34-0410-b5e6-96231b3b80d8
Don't replace shifts greater than the type with the maximum shift.
This isn't hit anywhere in the tests, and somewhere else is replacing
these with undef.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207000 91177308-0d34-0410-b5e6-96231b3b80d8
Pass::doInitialization is supposed to return False when it did not
change the program, not when a fatal error occurs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206975 91177308-0d34-0410-b5e6-96231b3b80d8
For now it contains a single flag, SanitizeAddress, which enables
AddressSanitizer instrumentation of inline assembly.
Patch by Yuri Gorshenin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206971 91177308-0d34-0410-b5e6-96231b3b80d8
This implements the core functionality necessary to remove an edge from
the call graph and correctly update both the basic graph and the SCC
structure. As part of that it has to run a tiny (in number of nodes)
Tarjan-style DFS walk of an SCC being mutated to compute newly formed
SCCs, etc.
This is *very rough* and a WIP. I have a bunch of FIXMEs for code
cleanup that will reduce the boilerplate in this change substantially.
I also have a bunch of simplifications to various parts of both
algorithms that I want to make, but first I'd like to have a more
holistic picture. Ideally, I'd also like more testing. I'll probably add
quite a few more unit tests as I go here to cover the various different
aspects and corner cases of removing edges from the graph.
Still, this is, so far, successfully updating the SCC graph in-place
without disrupting the identity established for the existing SCCs even
when we do challenging things like delete the critical edge that made an
SCC cycle at all and have to reform things as a tree of smaller SCCs.
Getting this to work is really critical for the new pass manager as it
is going to associate significant state with the SCC instance and needs
it to be stable. That is also the motivation behind the return of the
newly formed SCCs. Eventually, I'll wire this all the way up to the
public API so that the pass manager can use it to correctly re-enqueue
newly formed SCCs into a fresh postorder traversal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206968 91177308-0d34-0410-b5e6-96231b3b80d8
up the stack finishing the exploration of each entries children before
we're finished in addition to accounting for their low-links. Added
a unittest that really hammers home the need for this with interlocking
cycles that would each appear distinct otherwise and crash or compute
the wrong result. As part of this, nuke a stale fixme and bring the rest
of the implementation still more closely in line with the original
algorithm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206966 91177308-0d34-0410-b5e6-96231b3b80d8
resisted this for too long. Just with the basic testing here I was able
to exercise the analysis in more detail and sift out both type signature
bugs in the API and a bug in the DFS numbering. All of these are fixed
here as well.
The unittests will be much more important for the mutation support where
it is necessary to craft minimal mutations and then inspect the state of
the graph. There is just no way to do that with a standard FileCheck
test. However, unittesting these kinds of analyses is really quite easy,
especially as they're designed with the new pass manager where there is
essentially no infrastructure required to rig up the core logic and
exercise it at an API level.
As a minor aside about the DFS numbering bug, the DFS numbering used in
LCG is a bit unusual. Rather than numbering from 0, we number from 1,
and use 0 as the sentinel "unvisited" state. Other implementations often
use '-1' for this, but I find it easier to deal with 0 and it shouldn't
make any real difference provided someone doesn't write silly bugs like
forgetting to actually initialize the DFS numbering. Oops. ;]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206954 91177308-0d34-0410-b5e6-96231b3b80d8
AArch64 has feature predicates for NEON, FP and CRYPTO instructions.
This allows the compiler to generate code without using FP, NEON
or CRYPTO instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206949 91177308-0d34-0410-b5e6-96231b3b80d8
into a helper function. I plan to re-use it for doing incremental
DFS-based updates to the SCCs when we mutate the call graph.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206948 91177308-0d34-0410-b5e6-96231b3b80d8
the Callee list. This is going to be quite important to prevent removal
from going quadratic. No functionality changed at this point, this is
one of the refactoring patches I've broken out of my initial work toward
mutation updates of the call graph.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206938 91177308-0d34-0410-b5e6-96231b3b80d8
This prompted me to push references through most of DwarfDebug. Sorry
for the churn.
Honestly it's a bit silly that we're passing around units all over the
place like that anyway and I think it's mostly due to the DIE attribute
adding utility functions being utilities in DwarfUnit. I should have
another go at moving them out of DwarfUnit...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206925 91177308-0d34-0410-b5e6-96231b3b80d8
from places like MCCodeEmitter() in the MC backend when the
MCContext is const.
I was going to use this in my change for r206669 but Jim convinced
me to use an assert there. But this still is a good tweak.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206923 91177308-0d34-0410-b5e6-96231b3b80d8
So Chandler - how about those range algorithms? (would really love a
dereferencing range adapter for this sort of stuff)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206921 91177308-0d34-0410-b5e6-96231b3b80d8
In the case where the constant comes from a cloned cast instruction, the
materialization code has to go before the cloned cast instruction.
This commit fixes the method that finds the materialization insertion point
by making it aware of this case.
This fixes <rdar://problem/15532441>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206913 91177308-0d34-0410-b5e6-96231b3b80d8
diagnostic that includes location information.
Currently if one has this assembly:
.quad (0x1234 + (4 * SOME_VALUE))
where SOME_VALUE is undefined ones gets the less than
useful error message with no location information:
% clang -c x.s
clang -cc1as: fatal error: error in backend: expected relocatable expression
With this fix one now gets a more useful error message
with location information:
% clang -c x.s
x.s:5:8: error: expected relocatable expression
.quad (0x1234 + (4 * SOME_VALUE))
^
To do this I plumbed the SMLoc through the MCObjectStreamer
EmitValue() and EmitValueImpl() interfaces so it could be used
when creating the MCFixup.
rdar://12391022
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206906 91177308-0d34-0410-b5e6-96231b3b80d8
Evidently tablegen doesn't infer this from the HasBMI2 predicate on the BZHI
instructions. This should fix the recent bot failures.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206885 91177308-0d34-0410-b5e6-96231b3b80d8
The point of these calls is to allow Thumb-1 code to make use of the VFP unit
to perform its operations. This is not desirable with -msoft-float, since most
of the reasons you'd want that apply equally to the runtime library.
rdar://problem/13766161
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206874 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r206780.
This commit was regressing gdb.opt/inline-locals.exp in the GDB 7.5 test
suite. Reverting until I can fix the issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206867 91177308-0d34-0410-b5e6-96231b3b80d8
Don't introduce new operations on an illegal sub 32-bit type.
Do the operations on a 32-bit value, and then use a truncating store.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206864 91177308-0d34-0410-b5e6-96231b3b80d8
The branch that skips irreducible backedges was only active when
propagating mass at the top-level. In particular, when propagating mass
through a loop recognized by `LoopInfo` with irreducible control flow
inside, irreducible backedges would not be skipped.
Not sure where that idea came from, but the result was that mass was
lost until after loop exit. Added a testcase that covers this case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206860 91177308-0d34-0410-b5e6-96231b3b80d8
Store pointers directly to loops inside the nodes. This could have been
done without changing the type stored in `std::vector<>`. However,
rather than computing the number of loops before constructing them
(which `LoopInfo` doesn't provide directly), I've switched to a
`vector<unique_ptr<LoopData>>`.
This adds some heap overhead, but the number of loops is typically
small.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206857 91177308-0d34-0410-b5e6-96231b3b80d8
This was implicitly with copy assignment before, which fails to actually
clear `std::vector<>`'s heap storage. Move assignment would work, but
since MSVC can't imply those anyway, explicitly `clear()`-ing members
makes more sense.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206856 91177308-0d34-0410-b5e6-96231b3b80d8
definition below all the header #include lines. This updates most of the
miscellaneous other lib/... directories. A few left though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206845 91177308-0d34-0410-b5e6-96231b3b80d8
definition below all of the header #include lines, lib/Transforms/...
edition.
This one is tricky for two reasons. We again have a couple of passes
that define something else before the includes as well. I've sunk their
name macros with the DEBUG_TYPE.
Also, InstCombine contains headers that need DEBUG_TYPE, so now those
headers #define and #undef DEBUG_TYPE around their code, leaving them
well formed modular headers. Fixing these headers was a large motivation
for all of these changes, as "leaky" macros of this form are hard on the
modules implementation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206844 91177308-0d34-0410-b5e6-96231b3b80d8
definition below all the header #include lines, lib/Analysis/...
edition.
This one has a bit extra as there were *other* #define's before #include
lines in addition to DEBUG_TYPE. I've sunk all of them as a block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206843 91177308-0d34-0410-b5e6-96231b3b80d8
of a '.inc' file before including actual headers. In this case we had
both duplicated a header's include and were including a standard header.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206840 91177308-0d34-0410-b5e6-96231b3b80d8
system headers above the includes of generated '.inc' files that
actually contain code. In a few targets this was already done pretty
consistently, but it wasn't done *really* consistently anywhere. It is
strictly cleaner IMO and necessary in a bunch of places where the
DEBUG_TYPE is referenced from the generated code. Consistency with the
necessary places trumps. Hopefully the build bots are OK with the
movement of intrin.h...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206838 91177308-0d34-0410-b5e6-96231b3b80d8
define below all header includes in the lib/CodeGen/... tree. While the
current modules implementation doesn't check for this kind of ODR
violation yet, it is likely to grow support for it in the future. It
also removes one layer of macro pollution across all the included
headers.
Other sub-trees will follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206837 91177308-0d34-0410-b5e6-96231b3b80d8
while checking candidate for bit field extract.
Otherwise the value may not fit in uint64_t and this will trigger an
assertion.
This fixes PR19503.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206834 91177308-0d34-0410-b5e6-96231b3b80d8
behavior based on other files defining DEBUG_TYPE, which means it cannot
define DEBUG_TYPE at all. This is actually better IMO as it forces folks
to define relevant DEBUG_TYPEs for their files. However, it requires all
files that currently use DEBUG(...) to define a DEBUG_TYPE if they don't
already. I've updated all such files in LLVM and will do the same for
other upstream projects.
This still leaves one important change in how LLVM uses the DEBUG_TYPE
macro going forward: we need to only define the macro *after* header
files have been #include-ed. Previously, this wasn't possible because
Debug.h required the macro to be pre-defined. This commit removes that.
By defining DEBUG_TYPE after the includes two things are fixed:
- Header files that need to provide a DEBUG_TYPE for some inline code
can do so by defining the macro before their inline code and undef-ing
it afterward so the macro does not escape.
- We no longer have rampant ODR violations due to including headers with
different DEBUG_TYPE definitions. This may be mostly an academic
violation today, but with modules these types of violations are easy
to check for and potentially very relevant.
Where necessary to suppor headers with DEBUG_TYPE, I have moved the
definitions below the includes in this commit. I plan to move the rest
of the DEBUG_TYPE macros in LLVM in subsequent commits; this one is big
enough.
The comments in Debug.h, which were hilariously out of date already,
have been updated to reflect the recommended practice going forward.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206822 91177308-0d34-0410-b5e6-96231b3b80d8
The comment claimed that the register class information wasn't available
in the assembly parser, but that's not really true. It's just annoying to
get to. Replace the helper functions with references to the auto-generated
information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206802 91177308-0d34-0410-b5e6-96231b3b80d8
With a constant mask a vpermil* is just a shufflevector. This patch implements
that simplification. This allows us to produce denser code. It should also
allow more folding down the line.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206801 91177308-0d34-0410-b5e6-96231b3b80d8
Make sure only general purpose registers are valid for offset regs and
that 32-bit regs are only valid for sxtw and uxtw extends.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206799 91177308-0d34-0410-b5e6-96231b3b80d8
The canonical form for the extended addressing mode (e.g.,
"[x1, w2, uxtw #3]" is for the MCInst to have the second register be the
full 64-bit GPR64 register class. The instruction printer cleans up
the output for display to show the 32-bit register instead, per the
specification.
This simplifies 205893 now that the aliasing is handled in the printer
in 206495 so that the codegen path and the disassembler path give the
same MCInst form.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206797 91177308-0d34-0410-b5e6-96231b3b80d8
The rationale for this artificial dependency seems to have been lost to the
ravages of time, it is covered by no regression tests, and has no impact on
test-suite performance numbers on either x86 or PPC.
For the test suite, on both x86 and PPC, I ran the test suite 10 times (both as
a baseline and with this change), and found no statistically-significant
changes. For PPC, I used a P7 box. For x86, I used an Intel Xeon E5430. Both
with -O3 -mcpu=native.
This was discussed on-list back in January, but I've not had a chance to run
the performance tests until today.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206795 91177308-0d34-0410-b5e6-96231b3b80d8
This avoids copying the container by simply deleting until empty.
While I'd rather move to a stricter ownership semantic (unique_ptr),
SmallPtrSet can't cope with unique_ptr and the ownership semantics here
are a bit incestuous (Module sort of owns itself, but sort of doesn't
(if the LLVMContext is destroyed before the Module, then it deregisters
itself from the context... )).
Ideally Modules would be given to the context, or possibly an
emplace-like function to construct them there. Modules then shouldn't be
destroyed by LLVM API clients, but by interacting with the owner
(LLVMContext) directly (but even then, passing a Module* to LLVMContext
doesn't provide an easy way to destroy the Module, since the set would
be over unique_ptrs and you'd need a heterogenous lookup function which
SmallPtrSet doesn't have either).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206794 91177308-0d34-0410-b5e6-96231b3b80d8
With this MC is able to handle _GLOBAL_OFFSET_TABLE_ in 64 bit mode, which is
needed for medium and large code models.
This fixes pr19470.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206793 91177308-0d34-0410-b5e6-96231b3b80d8