X86. Basically, this is a reapplication of r158087 with a few fixes.
Specifically, (1) the stack pointer is restored from the base pointer before
popping callee-saved registers and (2) in obscure cases (see comments in patch)
we must cache the value of the original stack adjustment in the prologue and
apply it in the epilogue.
rdar://11496434
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160002 91177308-0d34-0410-b5e6-96231b3b80d8
multiple scalars and insert them into a vector. Next, we shuffle the elements
into the correct places, as before.
Also fix a small dagcombine bug in SimplifyBinOpWithSameOpcodeHands, when the
migration of bitcasts happened too late in the SelectionDAG process.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159991 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, this would become an integer extension operation, followed by a real integer->float conversion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159957 91177308-0d34-0410-b5e6-96231b3b80d8
getCondFromSETOpc, getCondFromCMovOpc, getSETFromCond, getCMovFromCond
No functional change intended.
If we want to update the condition code of CMOV|SET|Jcc, we first analyze the
opcode to get the condition code, then update the condition code, finally
synthesize the new opcode form the new condition code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159955 91177308-0d34-0410-b5e6-96231b3b80d8
Access mips register classes via MCRegisterInfo's functions instead of via the
TargetRegisterClasses defined in MipsGenRegisterInfo.inc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159953 91177308-0d34-0410-b5e6-96231b3b80d8
This patch removes ~70 lines in InstCombineLoadStoreAlloca.cpp and makes both functions a bit more aggressive than before :)
In theory, we can be more aggressive when removing an alloca than a malloc, because an alloca pointer should never escape, but we are not taking advantage of this anyway
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159952 91177308-0d34-0410-b5e6-96231b3b80d8
It is safe if EFLAGS is killed or re-defined.
When we are done with the basic block, check whether EFLAGS is live-out.
Do not optimize away cmp if EFLAGS is live-out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159888 91177308-0d34-0410-b5e6-96231b3b80d8
This means we can do cheap DSE for heap memory.
Nothing is done if the pointer excapes or has a load.
The churn in the tests is mostly due to objectsize, since we want to make sure we
don't delete the malloc call before evaluating the objectsize (otherwise it becomes -1/0)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159876 91177308-0d34-0410-b5e6-96231b3b80d8
For each Cmp, we check whether there is an earlier Sub which make Cmp
redundant. We handle the case where SUB operates on the same source operands as
Cmp, including the case where the two source operands are swapped.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159838 91177308-0d34-0410-b5e6-96231b3b80d8
DwarfDebug class could generate the same (inlined) DIVariable twice:
1) when trying to find abstract debug variable for a concrete inlined instance.
2) when explicitly collecting info for variables that were optimized out.
This change makes sure that this duplication won't happen and makes
Clang pass "gdb.opt/inline-locals" test from gdb testsuite.
Reviewed by Eric Christopher.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159811 91177308-0d34-0410-b5e6-96231b3b80d8
Print the second half of a double word operand.
The include list was cleaned up a bit as well.
Also the test case was modified to test for both
big and little patterns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159787 91177308-0d34-0410-b5e6-96231b3b80d8
The CopyToReg nodes that set up the argument registers before a call
must be glued to the call instruction. Otherwise, the scheduler may emit
the physreg copies long before the call, causing long live ranges for
the fixed registers.
Besides disabling good register allocation, that can also expose
problems when EmitInstrWithCustomInserter() splits a basic block during
the live range of a physreg.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159721 91177308-0d34-0410-b5e6-96231b3b80d8
Implement the TII hooks needed by EarlyIfConversion to create cmov
instructions and estimate their latency.
Early if-conversion is still not enabled by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159695 91177308-0d34-0410-b5e6-96231b3b80d8
- execute_external should be;
- Not on Win32.
- Using bash.
In reverse, "execute_internal" shoud be (Win32 && !bash).
- lit.getBashPath() behaves differently before and after tweaking $PATH.
I will add a few explanations there later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159641 91177308-0d34-0410-b5e6-96231b3b80d8
inlineasm-cnstrnt-bad-r-1.ll is NOT supposed to fail, so it was removed. This resulted in the removal of a negative test (inlineasm-cnstrnt-bad-r-1.ll)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159625 91177308-0d34-0410-b5e6-96231b3b80d8
inlineasm-cnstrnt-bad-r-1.ll is NOT supposed to fail, so it was removed. This resulted in the removal of a negative test (inlineasm-cnstrnt-bad-r-1.ll)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159610 91177308-0d34-0410-b5e6-96231b3b80d8
in the abstraction for lit test suites so that the various other layers
of abstraction pick up the same behavioral fix, and so that we still get
a complete list of dependencies for the 'check-all' target.
This should fix the follow-on issues of the same nature with various
other build targets, including Clang targets. Sorry for the churn, and
again thanks to Matt for testing and breaking this more thoroughly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159593 91177308-0d34-0410-b5e6-96231b3b80d8
No functionality changed here, except that the CMake installed by
default on Ubuntu Lucid should actually work with the makefile
generators now.
Thanks to Matt for the report and head-desking required to figure out
why it was failing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159588 91177308-0d34-0410-b5e6-96231b3b80d8
This is still a work in progress but I believe it is currently good enough
to fix PR13122 "Need unit test driver for codegen IR passes". For example,
you can run llc with -stop-after=loop-reduce to have it dump out the IR after
running LSR. Serializing machine-level IR is not yet supported but we have
some patches in progress for that.
The plan is to serialize the IR to a YAML file, containing separate sections
for the LLVM IR, machine-level IR, and whatever other info is needed. Chad
suggested that we stash the stop-after pass in the YAML file and use that
instead of the start-after option to figure out where to restart the
compilation. I think that's a great idea, but since it's not implemented yet
I put the -start-after option into this patch for testing purposes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159570 91177308-0d34-0410-b5e6-96231b3b80d8
another mechanical change accomplished though the power of terrible Perl
scripts.
I have manually switched some "s to 's to make escaping simpler.
While I started this to fix tests that aren't run in all configurations,
the massive number of tests is due to a really frustrating fragility of
our testing infrastructure: things like 'grep -v', 'not grep', and
'expected failures' can mask broken tests all too easily.
Essentially, I'm deeply disturbed that I can change the testsuite so
radically without causing any change in results for most platforms. =/
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159547 91177308-0d34-0410-b5e6-96231b3b80d8
versions of Bash. In addition, I can back out the change to the lit
built-in shell test runner to support this.
This should fix the majority of fallout on Darwin, but I suspect there
will be a few straggling issues.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159544 91177308-0d34-0410-b5e6-96231b3b80d8
and multi-line nature of this test. I don't really feel like bugging
this kind of edge-case, so just put it on one line and use single
quotes. With this, every test *really* passes with the built-in shell
test runner.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159530 91177308-0d34-0410-b5e6-96231b3b80d8
through my perl nets.
With this, the test suite passes even if I force it to run with the
built-in shell test logic, except for a test which REQUIREs shell.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159529 91177308-0d34-0410-b5e6-96231b3b80d8
This was done through the aid of a terrible Perl creation. I will not
paste any of the horrors here. Suffice to say, it require multiple
staged rounds of replacements, state carried between, and a few
nested-construct-parsing hacks that I'm not proud of. It happens, by
luck, to be able to deal with all the TCL-quoting patterns in evidence
in the LLVM test suite.
If anyone is maintaining large out-of-tree test trees, feel free to poke
me and I'll send you the steps I used to convert things, as well as
answer any painful questions etc. IRC works best for this type of thing
I find.
Once converted, switch the LLVM lit config to use ShTests the same as
Clang. In addition to being able to delete large amounts of Python code
from 'lit', this will also simplify the entire test suite and some of
lit's architecture.
Finally, the test suite runs 33% faster on Linux now. ;]
For my 16-hardware-thread (2x 4-core xeon e5520): 36s -> 24s
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159525 91177308-0d34-0410-b5e6-96231b3b80d8
a pipeline, and then a positive assertion via grep, use two RUN lines
instead.
Supporting these complex ideas of 'success' and 'failure' across
multiple stages of a pipeline is brittle in the shell world, and would
block switching to ShTest format; it only worked due to contrivances
introduced by the TclTest format.
Writing this as two separate RUN lines seems clearer in any event.
This is another step toward completely removing TclTests from lit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159524 91177308-0d34-0410-b5e6-96231b3b80d8
use FileCheck.
Aside from removing a dependence on TCL-style quoting, this also makes
the tests ... significantly more robust. =] It would be really, *really*
great of the maintainer(s) of the CellSPU backend went through and
systematically rewrite these tests to use FileCheck. There are a lot
more that have nearly this bad of abuses.
Another step along the path to a TclTest-free testsuite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159523 91177308-0d34-0410-b5e6-96231b3b80d8
just provide and reference separate input files from an Inputs
subdirectory. This pattern works very well in the Clang tree and is
easier to understand in my opinion. It also has fewer limitations and
will remove one particularly annoying use of TCL-style {} quoting from
the testsuite.
Also teach the LLVM lit configuration to avoid recursing into 'Inputs'
subdirectories. This wasn't required for the previous 'Inputs'
subdirectories used due to fortuitous suffix patterns.
This is the first step to completely removing support for TCL-style tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159520 91177308-0d34-0410-b5e6-96231b3b80d8
1) DIContext is now able to return function name for a given instruction address (besides file/line info).
2) llvm-dwarfdump accepts flag --functions that prints the function name (if address is specified by --address flag).
3) test case that checks the basic functionality of llvm-dwarfdump added
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159512 91177308-0d34-0410-b5e6-96231b3b80d8
implicit_def, the other instruction can be anything, including instructions
that define multiple values. Be careful about that and don't assume what operand
0 is.
Fixes pr13249.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159509 91177308-0d34-0410-b5e6-96231b3b80d8
re-used. Also, build in direct support for accumulating a set of lit
parameters, arguments, and testsuites to run as part of a 'check-all'
rule. This sinks 'check-all' from a Clang-specific construct to
a generic construct of the project.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159482 91177308-0d34-0410-b5e6-96231b3b80d8
Before this patch in pic 32 bit code we would add the global base register
and not load from that address. This is a really old bug, but before the
introduction of the tls attributes we would never select initial exec for
pic code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159409 91177308-0d34-0410-b5e6-96231b3b80d8
Corrected type for index of llvm.x86.avx2.gather.d.pd.256
from 256-bit to 128-bit.
Corrected types for src|dst|mask of llvm.x86.avx2.gather.q.ps.256
from 256-bit to 128-bit.
Support the following intrinsics:
llvm.x86.avx2.gather.d.q, llvm.x86.avx2.gather.q.q
llvm.x86.avx2.gather.d.q.256, llvm.x86.avx2.gather.q.q.256
llvm.x86.avx2.gather.d.d, llvm.x86.avx2.gather.q.d
llvm.x86.avx2.gather.d.d.256, llvm.x86.avx2.gather.q.d.256
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159402 91177308-0d34-0410-b5e6-96231b3b80d8
The original algorithm only used recursive pair fusion of equal-length
types. This is now extended to allow pairing of any types that share
the same underlying scalar type. Because we would still generally
prefer the 2^n-length types, those are formed first. Then a second
set of iterations form the non-2^n-length types.
Also, a call to SimplifyInstructionsInBlock has been added after each
pairing iteration. This takes care of DCE (and a few other things)
that make the following iterations execute somewhat faster. For the
same reason, some of the simple shuffle-combination cases are now
handled internally.
There is some additional refactoring work to be done, but I've had
many requests for this feature, so additional refactoring will come
soon in future commits (as will additional test cases).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159330 91177308-0d34-0410-b5e6-96231b3b80d8
This is another vestige of the DejaGNU roots. There were FIXMEs in the
lit setup to add a 'lit.site.cfg', which has been around for quite some
time now, so I've properly switched the handling of the 4 things
actually used in site.exp to go through lit.site.cfg now. No more
parsing of the .exp file, one fewer configure-style generated file,
etc., etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159313 91177308-0d34-0410-b5e6-96231b3b80d8
removing '-lit' qualifiers from make rules. I've left a legacy
'check-local-lit' rule in case build scripts have this encoded
somewhere.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159311 91177308-0d34-0410-b5e6-96231b3b80d8
It takes advantage of r159299 which introduces relocation support for N64.
elf-dump needed to be upgraded to support N64 relocations as well.
This passes make check.
Jack
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159302 91177308-0d34-0410-b5e6-96231b3b80d8
It takes advantage of r159299 which introduces relocation support for N64.
elf-dump needed to be upgraded to support N64 relocations as well.
This passes make check.
Jack
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159301 91177308-0d34-0410-b5e6-96231b3b80d8
Original commit message:
If a constant or a function has linkonce_odr linkage and unnamed_addr, mark it
hidden. Being linkonce_odr guarantees that it is available in every dso that
needs it. Being a constant/function with unnamed_addr guarantees that the
copies don't have to be merged.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159272 91177308-0d34-0410-b5e6-96231b3b80d8
before the expression root. Any existing operators that are changed to use one
of them needs to be moved between it and the expression root, and recursively
for the operators using that one. When I rewrote RewriteExprTree I accidentally
inverted the logic, resulting in the compacting going down from operators to
operands rather than up from operands to the operators using them, oops. Fix
this, resolving PR12963.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159265 91177308-0d34-0410-b5e6-96231b3b80d8
'check-llvm'.
Don't worry! 'check' still works! =] To rationalize the names of targets
used to run tests, the vague plan is the following:
make check-llvm # run LLVM reg/unit tests (currently 'check')
make check-clang # run Clang reg/unit tests (currently 'clang-test')
make check-rt # run CompilerRT reg/unit tests
make check-asan # run ASan reg/unit tests (subset of -rt)
make check-tsan # run TSan reg/unit tests (subset of -rt)
make check-all # run as much of the above as is available
The last one respects what projects are checked out and built for
a given tree. Personally, I would like to eventually make 'check' be an
alias for 'check-all'. For now however, it is an alias for 'check-llvm',
and thus no behavior has changed.
While this patch and my plan only really apply to CMake, I think it
might be good to similarly rationalize the naming scheme for the Make
builds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159258 91177308-0d34-0410-b5e6-96231b3b80d8
// C - zext(bool) -> bool ? C - 1 : C
if (ZExtInst *ZI = dyn_cast<ZExtInst>(Op1))
if (ZI->getSrcTy()->isIntegerTy(1))
return SelectInst::Create(ZI->getOperand(0), SubOne(C), C);
This ends up forming sext i1 instructions that codegen to terrible code. e.g.
int blah(_Bool x, _Bool y) {
return (x - y) + 1;
}
=>
movzbl %dil, %eax
movzbl %sil, %ecx
shll $31, %ecx
sarl $31, %ecx
leal 1(%rax,%rcx), %eax
ret
Without the rule, llvm now generates:
movzbl %sil, %ecx
movzbl %dil, %eax
incl %eax
subl %ecx, %eax
ret
It also helps with ARM (and pretty much any target that doesn't have a sext i1 :-).
The transformation was done as part of Eli's r75531. He has given the ok to
remove it.
rdar://11748024
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159230 91177308-0d34-0410-b5e6-96231b3b80d8
up to r158925 were handled as processor specific. Making them
generic and putting tests for these modifiers in the CodeGen/Generic
directory caused a number of targets to fail.
This commit addresses that problem by having the targets call
the generic routine for generic modifiers that they don't currently
have explicit code for.
For now only generic print operands 'c' and 'n' are supported.vi
Affected files:
test/CodeGen/Generic/asm-large-immediate.ll
lib/Target/PowerPC/PPCAsmPrinter.cpp
lib/Target/NVPTX/NVPTXAsmPrinter.cpp
lib/Target/ARM/ARMAsmPrinter.cpp
lib/Target/XCore/XCoreAsmPrinter.cpp
lib/Target/X86/X86AsmPrinter.cpp
lib/Target/Hexagon/HexagonAsmPrinter.cpp
lib/Target/CellSPU/SPUAsmPrinter.cpp
lib/Target/Sparc/SparcAsmPrinter.cpp
lib/Target/MBlaze/MBlazeAsmPrinter.cpp
lib/Target/Mips/MipsAsmPrinter.cpp
MSP430 isn't represented because it did not even run with
the long existing 'c' modifier and it was not apparent what
needs to be done to get it inline asm ready.
Contributer: Jack Carter
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159203 91177308-0d34-0410-b5e6-96231b3b80d8
merge all zero-sized alloca's into one, fixing c43204g from the Ada ACATS
conformance testsuite. What happened there was that a variable sized object
was being allocated on the stack, "alloca i8, i32 %size". It was then being
passed to another function, which tested that the address was not null (raising
an exception if it was) then manipulated %size bytes in it (load and/or store).
The optimizers cleverly managed to deduce that %size was zero (congratulations
to them, as it isn't at all obvious), which made the alloca zero size, causing
the optimizers to replace it with null, which then caused the check mentioned
above to fail, and the exception to be raised, wrongly. Note that no loads
and stores were actually being done to the alloca (the loop that does them is
executed %size times, i.e. is not executed), only the not-null address check.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159202 91177308-0d34-0410-b5e6-96231b3b80d8
The primary advantage is that loop optimizations will be applied in a
stable order. This helps debugging and unit test creation. It is also
a better overall implementation without pathologically bad performance
on deep functions.
On large functions (llvm-stress --size=200000 | opt -loops)
Before: 0.1263s
After: 0.0225s
On deep functions (after tweaking llvm-stress, thanks Nadav):
Before: 0.2281s
After: 0.0227s
See r158790 for more comments.
The loop tree is now consistently generated in forward order, but loop
passes are applied in reverse order over the program. If we have a
loop optimization that prefers forward order, that can easily be
achieved by adding a different type of LoopPassManager.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159183 91177308-0d34-0410-b5e6-96231b3b80d8
More condition codes are included when deciding whether to remove cmp after
a sub instruction. Specifically, we extend from GE|LT|GT|LE to
GE|LT|GT|LE|HS|LS|HI|LO|EQ|NE. If we have "sub a, b; cmp b, a; movhs", we
should be able to replace with "sub a, b; movls".
rdar: 11725965
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159166 91177308-0d34-0410-b5e6-96231b3b80d8
Verify that all paths from the entry block to a virtual register read
pass through a def. Enable this check even when MRI->isSSA() is false.
Verify that the live range of a virtual register is live out of all
predecessor blocks, even for PHI-values.
This requires that PHIElimination sometimes inserts IMPLICIT_DEF
instruction in predecessor blocks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159150 91177308-0d34-0410-b5e6-96231b3b80d8
Implicitly defined virtual registers can simply have the <undef> bit set
on all uses, and copies can be turned into implicit defs recursively.
Physical registers are a bit trickier. We handle the common case where a
physreg def is used by a nearby instruction in the same basic block. For
more complicated cases, just leave the IMPLICIT_DEF instruction in.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159149 91177308-0d34-0410-b5e6-96231b3b80d8
- simplifycfg: invoke undef/null -> unreachable
- instcombine: invoke new -> invoke expect(0, 0) (an arbitrary NOOP intrinsic; only done if the allocated memory is unused, of course)
- verifier: allow invoke of intrinsics (to make the previous step work)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159146 91177308-0d34-0410-b5e6-96231b3b80d8
Fix 'sys::IdentifyFileType' to work with big and little endian byte orderings
when reading the ELF object file type.
Initial patch by Stefan Hepp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159138 91177308-0d34-0410-b5e6-96231b3b80d8
hidden. Being linkonce_odr guarantees that it is available in every dso that
needs it. Being a constant/function with unnamed_addr guarantees that the
copies don't have to be merged.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159136 91177308-0d34-0410-b5e6-96231b3b80d8
The function live-out registers must be live at all function returns,
and %RCX is only used by eh.return. When a function also has a normal
return, only %RAX holds a return value.
This fixes PR13188.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159116 91177308-0d34-0410-b5e6-96231b3b80d8
This allows the user/front-end to specify a model that is better
than what LLVM would choose by default. For example, a variable
might be declared as
@x = thread_local(initialexec) global i32 42
if it will not be used in a shared library that is dlopen'ed.
If the specified model isn't supported by the target, or if LLVM can
make a better choice, a different model may be used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159077 91177308-0d34-0410-b5e6-96231b3b80d8
There are patterns to handle immediates when they fit in the immediate field.
e.g. %sub = add i32 %x, -123
=> sub r0, r0, #123
Add patterns to catch immediates that do not fit but should be materialized
with a single movw instruction rather than movw + movt pair.
e.g. %sub = add i32 %x, -65535
=> movw r1, #65535
sub r0, r0, r1
rdar://11726136
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159057 91177308-0d34-0410-b5e6-96231b3b80d8
As an example of how the custom DiagnosticType can be used to provide
better operand-mismatch diagnostics, add a custom diagnostic for
the imm0_15 operand class used for several system instructions.
Update the tests to expect the improved diagnostic.
rdar://8987109
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159051 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes PR5997.
These transforms were disabled because codegen couldn't deal with other
uses of trunc(x). This is now handled by the peephole pass.
This causes no regressions on x86-64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159003 91177308-0d34-0410-b5e6-96231b3b80d8
The code in X86TargetLowering::LowerEH_RETURN() assumes that a frame
pointer exists, but the frame pointer was forced by the presence of
llvm.eh.unwind.init which isn't guaranteed.
If llvm.eh.unwind.init is actually required in functions calling
eh.return (is it?), we should diagnose that instead of emitting bad
machine code.
This should fix the dragonegg-x86_64-linux-gcc-4.6-test bot.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158961 91177308-0d34-0410-b5e6-96231b3b80d8
Minor drive by fix to cleanup latency computation. Calling
getOperandLatency with a deliberately incorrect operand index does not
give you the latency you want.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158959 91177308-0d34-0410-b5e6-96231b3b80d8
boolean flag to an enum: { Fast, Standard, Strict } (default = Standard).
This option controls the creation by optimizations of fused FP ops that store
intermediate results in higher precision than IEEE allows (E.g. FMAs). The
behavior of this option is intended to match the behaviour specified by a
soon-to-be-introduced frontend flag: '-ffuse-fp-ops'.
Fast mode - allows formation of fused FP ops whenever they're profitable.
Standard mode - allow fusion only for 'blessed' FP ops. At present the only
blessed op is the fmuladd intrinsic. In the future more blessed ops may be
added.
Strict mode - allow fusion only if/when it can be proven that the excess
precision won't effect the result.
Note: This option only controls formation of fused ops by the optimizers. Fused
operations that are explicitly requested (e.g. FMA via the llvm.fma.* intrinsic)
will always be honored, regardless of the value of this option.
Internally TargetOptions::AllowExcessFPPrecision has been replaced by
TargetOptions::AllowFPOpFusion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158956 91177308-0d34-0410-b5e6-96231b3b80d8
to be generic across architectures. It has the
following description in the gnu sources:
Negate the immediate constant
Several Architectures such as x86 have local implementations
of operand modifier 'n' which go beyond the above description
slightly. This won't affect them.
Affected files:
lib/CodeGen/AsmPrinter/AsmPrinterInlineAsm.cpp
Added 'n' to the switch cases.
test/CodeGen/Generic/asm-large-immediate.ll
Generic compiled test (x86 for me)
test/CodeGen/Mips/asm-large-immediate.ll
Mips compiled version of the generic one
Contributer: Jack Carter
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158939 91177308-0d34-0410-b5e6-96231b3b80d8
to be generic across architectures. It has the
following description in the gnu sources:
Substitute immediate value without immediate syntax
Several Architectures such as x86 have local implementations
of operand modifier 'c' which go beyond the above description
slightly. To make use of the generic modifiers without overriding
local implementation one can make a call to the base class method
for AsmPrinter::PrintAsmOperand() in the locally derived method's
"default" case in the switch statement. That way if it is already
defined locally the generic version will never get called.
This change is needed when test/CodeGen/generic/asm-large-immediate.ll
failed on a native Mips board. The test was assuming a generic
implementation was in place.
Affected files:
lib/Target/Mips/MipsAsmPrinter.cpp:
Changed the default case to call the base method.
lib/CodeGen/AsmPrinter/AsmPrinterInlineAsm.cpp
Added 'c' to the switch cases.
test/CodeGen/Mips/asm-large-immediate.ll
Mips compiled version of the generic one
Contributer: Jack Carter
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158925 91177308-0d34-0410-b5e6-96231b3b80d8
- provide more extensive set of functions to detect library allocation functions (e.g., malloc, calloc, strdup, etc)
- provide an API to compute the size and offset of an object pointed by
Move a few clients (GVN, AA, instcombine, ...) to the new API.
This implementation is a lot more aggressive than each of the custom implementations being replaced.
Patch reviewed by Nick Lewycky and Chandler Carruth, thanks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158919 91177308-0d34-0410-b5e6-96231b3b80d8
_umodsi3 libcalls if they have the same arguments. This optimization
was apparently broken if one of the node was replaced in place.
rdar://11714607
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158900 91177308-0d34-0410-b5e6-96231b3b80d8
that are generated by TableGen and are already available in
MipsGenRegisterInfo.inc. Suggested by Jakob Stoklund Olesen.
Also, fix bug in function DecodeAFGR64RegisterClass.
Patch by Vladimir Medic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158846 91177308-0d34-0410-b5e6-96231b3b80d8
Regunit live ranges are computed on demand, so when mi-sched calls
handleMove, some regunits may not have live ranges yet.
That makes updating them easier: Just skip the non-existing ranges. They
will be computed correctly from the rescheduled machine code when they
are needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158831 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds DAG combines to form FMAs from pairs of FADD + FMUL or
FSUB + FMUL. The combines are performed when:
(a) Either
AllowExcessFPPrecision option (-enable-excess-fp-precision for llc)
OR
UnsafeFPMath option (-enable-unsafe-fp-math)
are set, and
(b) TargetLoweringInfo::isFMAFasterThanMulAndAdd(VT) is true for the type of
the FADD/FSUB, and
(c) The FMUL only has one user (the FADD/FSUB).
If your target has fast FMA instructions you can make use of these combines by
overriding TargetLoweringInfo::isFMAFasterThanMulAndAdd(VT) to return true for
types supported by your FMA instruction, and adding patterns to match ISD::FMA
to your FMA instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158757 91177308-0d34-0410-b5e6-96231b3b80d8
The PPC::EXTSW instruction preserves the low 32 bits of its input, just
like some of the x86 instructions. Use it to reduce register pressure
when the low 32 bits have multiple uses.
This requires a small change to PeepholeOptimizer since EXTSW takes a
64-bit input register.
This is related to PR5997.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158743 91177308-0d34-0410-b5e6-96231b3b80d8
The condition code didn't actually matter for arm "b" instructions,
unlike "bl". It should just use the R_ARM_JUMP24 reloc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158722 91177308-0d34-0410-b5e6-96231b3b80d8
TargetLoweringObjectFileELF. Use this to support it on X86. Unlike ARM,
on X86 it is not easy to find out if .init_array should be used or not, so
the decision is made via TargetOptions and defaults to off.
Add a command line option to llc that enables it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158692 91177308-0d34-0410-b5e6-96231b3b80d8
Original commit msg:
add the 'alloc' metadata node to represent the size of offset of buffers pointed to by pointers.
This metadata can be attached to any instruction returning a pointer
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158688 91177308-0d34-0410-b5e6-96231b3b80d8
The NOP, WFE, WFI, SEV and YIELD instructions are all hints w/
a different immediate value in bits [7,0]. Define a generic HINT
instruction and refactor NOP, WFI, WFI, SEV and YIELD to be
assembly aliases of that.
rdar://11600518
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158674 91177308-0d34-0410-b5e6-96231b3b80d8
when a compile time constant is known. This occurs when implicitly zero
extending function arguments from 16 bits to 32 bits. The 8 bit case doesn't
need to be handled, as the 8 bit constants are encoded directly, thereby
not needing a separate load instruction to form the constant into a register.
<rdar://problem/11481151>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158659 91177308-0d34-0410-b5e6-96231b3b80d8
temporarily reverted.
This test is annoyingly overspecified, but I don't know of another way
to thoroughly test the saving and restoring of the registers. While this
will have to be adjusted even with the issue fixed in order to re-apply
r158087, those adjustments should very clearly indicate that it is still
correct (%esp getting restored prior to pops), whereas without it, this
case can easily slip under the radar.
Still, any suggestions for improvements are very welcome.
All credit to Matt Beaumont-Gay for reducing this out of an insane
Address Sanitizer crash to a reasonably small seg-faulting C program
when built with -mstackrealign. I just reduced it to IR, which was much
simpler. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158656 91177308-0d34-0410-b5e6-96231b3b80d8
This patch causes problems when both dynamic stack realignment and
dynamic allocas combine in the same function. With this patch, we no
longer build the epilog correctly, and silently restore registers from
the wrong position in the stack.
Thanks to Matt for tracking this down, and getting at least an initial
test case to Chad. I'm going to try to check a variation of that test
case in so we can easily track the fixes required.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158654 91177308-0d34-0410-b5e6-96231b3b80d8
This cleans up the method used to find trip counts in order to form CTR loops on PPC.
This refactoring allows the pass to find loops which have a constant trip count but also
happen to end with a comparison to zero. This also adds explicit FIXMEs to mark two different
classes of loops that are currently ignored.
In addition, we now search through all potential induction operations instead of just the first.
Also, we check the predicate code on the conditional branch and abort the transformation if the
code is not EQ or NE, and we then make sure that the branch to be transformed matches the
condition register defined by the comparison (multiple possible comparisons will be considered).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158607 91177308-0d34-0410-b5e6-96231b3b80d8
The present implementation handles only TBAA and FP metadata, discarding everything else.
For debug metadata, the current behavior is maintained (the debug metadata associated with
one of the instructions will be kept, discarding that attached to the other).
This should address PR 13040.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158606 91177308-0d34-0410-b5e6-96231b3b80d8
Dynamic GEPs created by SROA needed to insert extra "i32 0"
operands to index through structs and arrays to get to the
vector being indexed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158590 91177308-0d34-0410-b5e6-96231b3b80d8
This patch will optimize abs(x-y)
FROM
sub, movs, rsbmi
TO
subs, rsbmi
For abs, we will use cmp instead of movs. This is necessary because we already
have an existing peephole pass which optimizes away cmp following sub.
rdar: 11633193
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158551 91177308-0d34-0410-b5e6-96231b3b80d8
linkonce linkage. For example, it is not valid to add unnamed_addr.
This also fixes a crash in g++.dg/opt/static5.C.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158528 91177308-0d34-0410-b5e6-96231b3b80d8
Patch extracted from a larger one by the PaX team. I added the testcases
and tightened error handling a bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158523 91177308-0d34-0410-b5e6-96231b3b80d8
example degenerate phi nodes and binops that use themselves in unreachable code.
Thanks to Charles Davis for the testcase that uncovered this can of worms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158508 91177308-0d34-0410-b5e6-96231b3b80d8
This patch extends FoldBranchToCommonDest to fold unconditional branches.
For unconditional branches, we fold them if it is easy to update the phi nodes
in the common successors.
rdar://10554090
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158392 91177308-0d34-0410-b5e6-96231b3b80d8
