This new disassembler can correctly decode all the testcases that the old one did, though
some "expected failure" testcases are XFAIL'd for now because it is not (yet) as strict in
operand checking as the old one was.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137144 91177308-0d34-0410-b5e6-96231b3b80d8
Memory operand parsing is a bit haphazzard at the moment, in no small part
due to the even more haphazzard representations of memory operands in the .td
files. Start cleaning that all up, at least a bit.
The addressing modes in the .td files will be being simplified to not be
so monolithic, especially with regards to immediate vs. register offsets
and post-indexed addressing. addrmode3 is on its way with this patch, for
example.
This patch is foundational to enable going back to smaller incremental patches
for the individual memory referencing instructions themselves. It does just
enough to get the basics in place and handle the "make check" regression tests
we already have.
Follow-up work will be fleshing out the details and adding more robust test
cases for the individual instructions, starting with ARM mode and moving from
there into Thumb and Thumb2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136845 91177308-0d34-0410-b5e6-96231b3b80d8
Encode the width operand as it encodes in the instruction, which simplifies
the disassembler and the encoder, by using the imm1_32 operand def. Add a
diagnostic for the context-sensitive constraint that the width must be in
the range [1,32-lsb].
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136264 91177308-0d34-0410-b5e6-96231b3b80d8
Refactor the rest of the extend instructions to not artificially distinguish
between a rotate of zero and a rotate of any other value. Replace the by-zero
versions with Pat<>'s for ISel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136226 91177308-0d34-0410-b5e6-96231b3b80d8
Refactor the SXTB, SXTH, SXTB16, UXTB, UXTH, and UXTB16 instructions to not
have an 'r' and an 'r_rot' version, but just a single version with a rotate
that can be zero. Use plain Pat<>'s for the ISel of the non-rotated version.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136225 91177308-0d34-0410-b5e6-96231b3b80d8
Allow the rot_imm operand to be optional. This sets the stage for refactoring
away the "rr" versions from the multiclasses and replacing them with Pat<>s.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136154 91177308-0d34-0410-b5e6-96231b3b80d8
Start of cleaning this up a bit. First step is to remove the encoder hook by
storing the operand as the bits it'll actually encode to so it can just be
directly used. Map it to the assembly source values 8/16/24 when we print it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136152 91177308-0d34-0410-b5e6-96231b3b80d8
Fix the Rn register encoding for both SSAT and USAT. Update the parsing of the
shift operand to correctly handle the allowed shift types and immediate ranges
and issue meaningful diagnostics when an illegal value or shift type is
specified. Add aliases to parse an ommitted shift operand (default value of
'lsl #0').
Add tests for diagnostics and proper encoding.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135990 91177308-0d34-0410-b5e6-96231b3b80d8
The immediate is in the range 1-32, but is encoded as 0-31 in a 5-bit bitfield.
Update the representation such that we store the operand as 0-31, allowing us
to remove the encoder method and the special case handling in the disassembler.
Update the assembly parser and the instruction printer accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135823 91177308-0d34-0410-b5e6-96231b3b80d8
Move common definitions for ARM and Thumb2 into ARMInstrFormats.td and rename
them to be a bit more descriptive that they're for the PKH instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135617 91177308-0d34-0410-b5e6-96231b3b80d8
The shift type is implied by the instruction (PKHBT vs. PKHTB) and so shouldn't
be also encoded as part of the shift value immediate. Otherwise we're able to
represent invalid instructions, plus it needlessly complicates the
representation. Preparatory work for asm parsing of these instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135616 91177308-0d34-0410-b5e6-96231b3b80d8
Add range checking for the immediate operand and handle the "mov" mnemonic
choosing between encodings based on the value of the immediate. Add tests
for fixups, encoding choice and values, and diagnostic for out of range values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135500 91177308-0d34-0410-b5e6-96231b3b80d8
Hook up the TableGen lowering for simple pseudo instructions for ARM and
use it for a subset of the many pseudos the backend has as proof of concept.
More conversions to come.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134705 91177308-0d34-0410-b5e6-96231b3b80d8
The DSP instructions in the Thumb2 instruction set are an optional extension
in the Cortex-M* archtitecture. When present, the implementation is considered
an "ARMv7E-M implementation," and when not, an "ARMv7-M implementation."
Add a subtarget feature hook for the v7e-m instructions and hook it up. The
cortex-m3 cpu is an example of a v7m implementation, while the cortex-m4 is
a v7e-m implementation.
rdar://9572992
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134261 91177308-0d34-0410-b5e6-96231b3b80d8
t2MOVCC[ri] are just t2MOV[ri] instructions, so properly pseudo-ize them.
The Thumb1 versions, tMOVCC[ri] were only present for use by the size-
reduction pass, so they're no longer necessary at all and can be deleted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134242 91177308-0d34-0410-b5e6-96231b3b80d8
It's just a call to a special helper function. Get rid of the T2 variant
entirely, as it's identical to the Thumb1 version.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134178 91177308-0d34-0410-b5e6-96231b3b80d8
It's just a t2LDMIA_UPD instruction with extra codegen properties, so it
doesn't need the encoding information. As a side-benefit, we now correctly
recognize for instruction printing as a 'pop' instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134173 91177308-0d34-0410-b5e6-96231b3b80d8
Unlike Thumb1, Thumb2 does not have dedicated encodings for adjusting the
stack pointer. It can just use the normal add-register-immediate encoding
since it can use all registers as a source, not just R0-R7. The extra
instruction definitions are just duplicates of the normal instructions with
the (not well enforced) constraint that the source register was SP.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134114 91177308-0d34-0410-b5e6-96231b3b80d8
When the destination operand is the same as the first source register
operand for arithmetic instructions, the destination operand may be omitted.
For example, the following two instructions are equivalent:
and r1, #ff
and r1, r1, #ff
rdar://9672867
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133973 91177308-0d34-0410-b5e6-96231b3b80d8
Correctly parse the forms of the Thumb mov-immediate instruction:
1. 8-bit immediate 0-255.
2. 12-bit shifted-immediate.
The 16-bit immediate "movw" form is also legal with just a "mov" mnemonic,
but is not yet supported. More parser logic necessary there due to fixups.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133966 91177308-0d34-0410-b5e6-96231b3b80d8
1. (((x) & 0xFF00) >> 8) | (((x) & 0x00FF) << 8)
=> (bswap x) >> 16
2. ((x&0xff)<<8)|((x&0xff00)>>8)|((x&0xff000000)>>8)|((x&0x00ff0000)<<8))
=> (rotl (bswap x) 16)
This allows us to eliminate most of the def : Pat patterns for ARM rev16
revsh instructions. It catches many more cases for ARM and x86.
rdar://9609108
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133503 91177308-0d34-0410-b5e6-96231b3b80d8
must be encoded decremented by one. Only add encoding tests for ssat16
because ssat can't be parsed yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132324 91177308-0d34-0410-b5e6-96231b3b80d8
to load/store i64 values. Since there's no current support to explicitly
declare such restrictions, implement it by using specific hardcoded register
pairs during isel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132248 91177308-0d34-0410-b5e6-96231b3b80d8
LiveVariables doesn't understand that clobbering D0 and D1 completely overwrites
Q0, so if Q0 is live-in to a function, its live range will extend beyond a
function call that only clobbers D0 and D1. This shows up in the
ARM/2009-11-01-NeonMoves test case.
LiveVariables should probably implement the much stricter rules for physreg
liveness that RAFast imposes - a physreg is killed by the first use of any
alias.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@130801 91177308-0d34-0410-b5e6-96231b3b80d8