"hint" space for Thumb actually overlaps the encoding space of the CPS
instruction. In actuality, hints can be defined as CPS instructions where imod
and M bits are all nil.
Handle decoding of permitted nop-compatible hints (i.e. nop, yield, wfi, wfe,
sev) in DecodeT2CPSInstruction.
This commit adds a proper diagnostic message for Imm0_4 and updates all tests.
Patch by Mihail Popa <Mihail.Popa@arm.com>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180617 91177308-0d34-0410-b5e6-96231b3b80d8
According to the ARM reference manual, constant offsets are mandatory for pre-indexed addressing modes.
The MC disassembler was not obeying this when the offset is 0.
It was producing instructions like: str r0, [r1]!.
Correct syntax is: str r0, [r1, #0]!.
This change modifies the dumping of operands so that the offset is always printed, regardless of its value, when pre-indexed addressing mode is used.
Patch by Mihail Popa <Mihail.Popa@arm.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179398 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions aren't universally available, but depend on a specific
extension to the normal ARM architecture (rather than, say, v6/v7/...) so a new
feature is appropriate.
This also enables the feature by default on A-class cores which usually have
these extensions, to avoid breaking existing code and act as a sensible
default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179171 91177308-0d34-0410-b5e6-96231b3b80d8
If PC or SP is the destination, the disassembler erroneously failed with the
invalid encoding, despite the manual saying that both are fine.
This patch addresses failure to decode encoding T4 of LDR (A8.8.62) which is a
postindexed load, where the offset 0xc is applied to SP after the load occurs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178017 91177308-0d34-0410-b5e6-96231b3b80d8
The Printer will now print instructions with the correct alignment specifier syntax, like
vld1.8 {d16}, [r0:64]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175884 91177308-0d34-0410-b5e6-96231b3b80d8
The parser will now accept instructions with alignment specifiers written like
vld1.8 {d16}, [r0:64]
, while also still accepting the incorrect syntax
vld1.8 {d16}, [r0, :64]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175164 91177308-0d34-0410-b5e6-96231b3b80d8
This is for the lldb team so most of but not all of the values are
to be printed as hex with this option. Some small values like the
scale in an X86 address were requested to printed in decimal
without the leading 0x.
There may be some tweaks need to places that may still be in
decimal that they want in hex. Specially for arm. I made my best
guess. Any tweaks from here should be simple.
I also did the best I know now with help from the C++ gurus
creating the cleanest formatImm() utility function and containing
the changes. But if someone has a better idea to make something
cleaner I'm all ears and game for changing the implementation.
rdar://8109283
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169393 91177308-0d34-0410-b5e6-96231b3b80d8
When the operand is a plain immediate rather than a label, print it
as [pc, #imm] like we do for the Thumb2 wide encoding variant.
rdar://12154503
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166991 91177308-0d34-0410-b5e6-96231b3b80d8
is 24 bits not 20 and the decoding needed to correctly handle converting the
J1 and J2 bits to their I1 and I2 values to reconstruct the displacement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166982 91177308-0d34-0410-b5e6-96231b3b80d8
Per the October 12, 2012 Proposal for annotated disassembly output sent out by
Jim Grosbach this set of changes implements this for X86 and arm. The llvm-mc
tool now has a -mdis option to produced the marked up disassembly and a couple
of small example test cases have been added.
rdar://11764962
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166445 91177308-0d34-0410-b5e6-96231b3b80d8
another mechanical change accomplished though the power of terrible Perl
scripts.
I have manually switched some "s to 's to make escaping simpler.
While I started this to fix tests that aren't run in all configurations,
the massive number of tests is due to a really frustrating fragility of
our testing infrastructure: things like 'grep -v', 'not grep', and
'expected failures' can mask broken tests all too easily.
Essentially, I'm deeply disturbed that I can change the testsuite so
radically without causing any change in results for most platforms. =/
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159547 91177308-0d34-0410-b5e6-96231b3b80d8
versions of Bash. In addition, I can back out the change to the lit
built-in shell test runner to support this.
This should fix the majority of fallout on Darwin, but I suspect there
will be a few straggling issues.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159544 91177308-0d34-0410-b5e6-96231b3b80d8
This was done through the aid of a terrible Perl creation. I will not
paste any of the horrors here. Suffice to say, it require multiple
staged rounds of replacements, state carried between, and a few
nested-construct-parsing hacks that I'm not proud of. It happens, by
luck, to be able to deal with all the TCL-quoting patterns in evidence
in the LLVM test suite.
If anyone is maintaining large out-of-tree test trees, feel free to poke
me and I'll send you the steps I used to convert things, as well as
answer any painful questions etc. IRC works best for this type of thing
I find.
Once converted, switch the LLVM lit config to use ShTests the same as
Clang. In addition to being able to delete large amounts of Python code
from 'lit', this will also simplify the entire test suite and some of
lit's architecture.
Finally, the test suite runs 33% faster on Linux now. ;]
For my 16-hardware-thread (2x 4-core xeon e5520): 36s -> 24s
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159525 91177308-0d34-0410-b5e6-96231b3b80d8
for the assembler and disassembler. Which were not being set/read correctly
for offsets greater than 22 bits in some cases.
Changes to lib/Target/ARM/ARMAsmBackend.cpp from Gideon Myles!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156118 91177308-0d34-0410-b5e6-96231b3b80d8
instructions with writebacks. And add test a case for all opcodes handed by
DecodeVLD2DupInstruction() in ARMDisassembler.cpp .
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154884 91177308-0d34-0410-b5e6-96231b3b80d8
1. The new instruction itinerary entries are not properly described.
2. The asm parser can't handle vfms and vfnms.
3. There were no assembler, disassembler test cases.
4. HasNEON2 has the wrong assembler predicate.
rdar://10139676
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154456 91177308-0d34-0410-b5e6-96231b3b80d8
* Removed test/lib/llvm.exp - it is no longer needed
* Deleted the dg.exp reading code from test/lit.cfg. There are no dg.exp files
left in the test suite so this code is no longer required. test/lit.cfg is
now much shorter and clearer
* Removed a lot of duplicate code in lit.local.cfg files that need access to
the root configuration, by adding a "root" attribute to the TestingConfig
object. This attribute is dynamically computed to provide the same
information as was previously provided by the custom getRoot functions.
* Documented the config.root attribute in docs/CommandGuide/lit.pod
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153408 91177308-0d34-0410-b5e6-96231b3b80d8